No post after upgraded to 26.2.0-trunk.62

[zeyoner]

Hello fellow geeks/nerds,

 

Here still using a Rock Pi 4c on 26.2.0-trunk.44. After upgrading to 26.2.0-trunk.62 the Rockpi just does not come back. No display no network. Wish I could provide more details beside the versions. I've went ahead and froze the kernel updates. If there's a way to maybe pull a log of sorts please let me know and I'll post it.

[eselarm]

https://docs.radxa.com/en/rock4/rock4c+/low-level-dev/serial

and set loglevel to 7 in armbianEnv.txt

[zeyoner]

I'll have to order a USB serial cable based on CH340. Give me a few days and I'll have those logs for you.

[eselarm]

59 minutes ago, zeyoner said:

I'll have to order a USB serial cable based on CH340. Give me a few days and I'll have those logs for you.

Maybe a handful, I have most SBC's equipped with one permanently. And needed for Arduinos etc, you can even power tiny old things like RPI0/1 with it (if you connect red wire to 5V pin as well).

 

In the meantime, you might think about some previous U-Boot and previous kernel. For quite some SBCs, there is trouble when U-Boot is new/mainline/releasecandidate and kernel vendor. I am currently also doing some tests on my NanoPi-R6C (RK3588s) because HDMI is not initialized fast enough (by U-Boot). And with 6.1.115 vendor kernel really choppy mouse updates and green tint, not complete flat green luckily, I can still see icons and mouse.

[zeyoner]

Ok, I got the serial output working. Oddly everything worked and the unit booted. 😕

 

So I go and put the Radxa Penta SATA HAT and boom back to the same issue. The HAT appears to be causing an issue. Activity light is on but in a continuous double blink. The NIC is also showing activity but I can not access or ping. Switch shows a link but no data. Sucks because of the Penta HAT, I am not able to connect the serial to USB cable. The HAT is covering the entire GPIO.

 

https://radxa.com/products/accessories/penta-sata-hat

 

Thought to myself. Ok, let's revert back to an older release (Bookworm). It has the same issue. It's not until I get to Bullseye that it works. Has me thinking. Am I that few who purchased the Rock Pi 4C non plus with their Penta SATA HAT? 

Edited 6 minutes ago by zeyoner