Toxich_UA Posted December 1, 2017 Share Posted December 1, 2017 Hi! I have some troubles with my OPI. I was install Armbian on the microSd (black SanDisk 16gb class 10) with Rufus. After insert card into OPI and connect HDMI and power cable on screen i have next: U-Boot 2017.09-armbian (Now 20 2017 - 02:47:53 +0100) Allwinner Technology CPU: Allwinner H5 (SUN50I) Model: OrangePi PC 2 DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: vidconsole Err: vidconsole Net: phy interface7 eth0: ethernet@1c30000 230454 bytes read in 151 ms (1.5 MiB/s) There is no valid bmp file at the given address starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 Autoboot in 1 seconds, press "Space" to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3100 bytes read in 197 ms (14.6 KiB/s) #executing script at 4fc00000 Wring image format for "source" command SCRIPT FAILED: continuint... Device 0: device type unknown ... is now current device ** Bad device usb 0 ** ** Bad device usb 0 ** Bootp broadcast 1 Bootp broadcast 2 Bootp broadcast 3 ... After another some "BooTP broadcast " around 10 - 15 they print: Retry time exceeded: starting again missing enviroment variable: pxeuuid missing enviroment variable: bootfile and some errors related to 'serverip' not set, print config not found and start again. I try to install another OS (like Ubuntu, Debian desktop and server version) but they give me purple screen. Can someone help me? Link to comment Share on other sites More sharing options...
Tido Posted December 1, 2017 Share Posted December 1, 2017 Images shall only be written with Etcher on all platforms since unlike other tools Etcher validates burning results saving you from corrupted SD card contents. https://etcher.io/ Link to comment Share on other sites More sharing options...
Toxich_UA Posted December 1, 2017 Author Share Posted December 1, 2017 44 minutes ago, Tido said: Images shall only be written with Etcher on all platforms since unlike other tools Etcher validates burning results saving you from corrupted SD card contents. https://etcher.io/ I try Win32DiskImager, Rufus, Etcher, try format flash with Standard windows formatter, SD Formatter. All try have same results. BTW I can access to board with SSH, but can't login(wrong password). Link to comment Share on other sites More sharing options...
Tido Posted December 1, 2017 Share Posted December 1, 2017 Well, then you have to try 2 things: 1. another SDcard 2. another PowerSupply PW is 1234 Link to comment Share on other sites More sharing options...
lomady Posted December 2, 2017 Share Posted December 2, 2017 Unfortunately Etcher does not validate the write on Linux. See this issue Also try sudo sync before pulling out the card. Besides SDcard and power supply issues there could be a chance that the board itself is defective. It is a cheap chinese stuff, remember? Link to comment Share on other sites More sharing options...
Toxich_UA Posted December 2, 2017 Author Share Posted December 2, 2017 Thank you all for the answer. I found the problem, wrong sd card. I try another card and all works fine. Link to comment Share on other sites More sharing options...
guidol Posted December 2, 2017 Share Posted December 2, 2017 2 hours ago, Toxich_UA said: I found the problem, wrong sd card. I try another card and all works fine. and of which type/manufacturer/size was the bad card? Link to comment Share on other sites More sharing options...
Toxich_UA Posted December 2, 2017 Author Share Posted December 2, 2017 44 minutes ago, guidol said: and of which type/manufacturer/size was the bad card? Black sdhc SanDisk 16gb class 10. Maybe card are not bad. The fact is that i don't have normal sdhc card reader (micro sd to usb), in order to i use old Toshiba laptop. Maybe problem in it. I waited about two hours for the laptop to write the files. But, second time i use SP 2gb micro sd and all was be fine and lasted about 30 min. I buy external 3.0 usb card reader, and try with them again. And if i don't forget i write here results of this testing. Link to comment Share on other sites More sharing options...
Recommended Posts