0
nopnop2002

Orangepi zero plus2 H3 (4.19.20)

Recommended Posts

I installed Armbian_5.75_Orangepizeroplus2-h3_Debian_stretch_next_4.19.20.

But it can't boot up.


These image can boot up.

Armbian_5.65_Orangepizeroplus2-h3_Debian_stretch_next_4.14.78

Armbian_5.69_Orangepizeroplus2-h3_Debian_stretch_next_4.19.13
 

Plus2_H3.jpg

Share this post


Link to post
Share on other sites

I have been having the same problem for a number of images, I ended up having to add a user patch to use the uboot in May.

Share this post


Link to post
Share on other sites
(edited)
Spoiler

    U-Boot SPL 2018.11-armbian (Feb 08 2019 - 11:34:49 +0100)
    DRAM: 512 MiB
    Trying to boot from MMC1


    U-Boot 2018.11-armbian (Feb 08 2019 - 11:34:49 +0100) Allwinner Technology

    CPU:   Allwinner H3 (SUN8I 1680)
    Model: Xunlong Orange Pi Zero Plus 2
    DRAM:  512 MiB
    MMC:   SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
    Loading Environment from EXT4... ** File not found /boot/boot.env **

    ** Unable to read "/boot/boot.env" from mmc0:1 **
    In:    serial
    Out:   serial
    Err:   serial
    Net:   No ethernet found.
    230454 bytes read in 29 ms (7.6 MiB/s)
    starting USB...
    USB0:   USB EHCI 1.00
    USB1:   USB OHCI 1.0
    USB2:   USB EHCI 1.00
    USB3:   USB OHCI 1.0
    USB4:   USB EHCI 1.00
    USB5:   USB OHCI 1.0
    scanning bus 0 for devices... 1 USB Device(s) found
    scanning bus 2 for devices... 1 USB Device(s) found
    scanning bus 4 for devices... 1 USB Device(s) found
           scanning usb for storage devices... 0 Storage Device(s) found
    Autoboot in 1 seconds, press <Space> to stop
    switch to partitions #0, OK
    mmc0 is current device
    Scanning mmc 0:1...
    Found U-Boot script /boot/boot.scr
    3798 bytes read in 24 ms (154.3 KiB/s)
    ## Executing script at 43100000
    U-boot loaded from SD
    Boot script loaded from mmc
    179 bytes read in 19 ms (8.8 KiB/s)
    4922074 bytes read in 271 ms (17.3 MiB/s)
    7323200 bytes read in 390 ms (17.9 MiB/s)
    Found mainline kernel configuration
    ** File not found /boot/dtb/sun8i-h3-orangepi-zero-plus2.dtb **
    libfdt fdt_check_header(): FDT_ERR_BADMAGIC
    No FDT memory address configured. Please configure
    the FDT address via "fdt addr <address>" command.
    Aborting!
    504 bytes read in 214 ms (2 KiB/s)
    Applying kernel provided DT overlay sun8i-h3-usbhost2.dtbo
    No FDT memory address configured. Please configure
    the FDT address via "fdt addr <address>" command.
    Aborting!
    504 bytes read in 213 ms (2 KiB/s)
    Applying kernel provided DT overlay sun8i-h3-usbhost3.dtbo
    No FDT memory address configured. Please configure
    the FDT address via "fdt addr <address>" command.
    Aborting!
    Error applying DT overlays, restoring original DT
    ** File not found /boot/dtb/sun8i-h3-orangepi-zero-plus2.dtb **
    ## Loading init Ramdisk from Legacy Image at 43300000 ...
       Image Name:   uInitrd
       Image Type:   ARM Linux RAMDisk Image (gzip compressed)
       Data Size:    4922010 Bytes = 4.7 MiB
       Load Address: 00000000
       Entry Point:  00000000
       Verifying Checksum ... OK
    ERROR: Did not find a cmdline Flattened Device Tree
    Could not find a valid device tree
    SCRIPT FAILED: continuing...
    switch to partitions #0, OK
    mmc1(part 0) is current device
    Scanning mmc 1:1...

    Device 0: device type unknown
    ... is now current device
    No ethernet found.
    missing environment variable: pxeuuid
    missing environment variable: bootfile
    Retrieving file: pxelinux.cfg/00000000
    No ethernet found.
    missing environment variable: bootfile
    Retrieving file: pxelinux.cfg/0000000
    No ethernet found.
    missing environment variable: bootfile
    Retrieving file: pxelinux.cfg/000000
    No ethernet found.
    missing environment variable: bootfile
    Retrieving file: pxelinux.cfg/00000
    No ethernet found.
    missing environment variable: bootfile
    Retrieving file: pxelinux.cfg/0000
    No ethernet found.
    missing environment variable: bootfile
    Retrieving file: pxelinux.cfg/000
    No ethernet found.
    missing environment variable: bootfile
    Retrieving file: pxelinux.cfg/00
    No ethernet found.
    missing environment variable: bootfile
    Retrieving file: pxelinux.cfg/0
    No ethernet found.
    missing environment variable: bootfile
    Retrieving file: pxelinux.cfg/default-arm-sunxi
    No ethernet found.
    missing environment variable: bootfile
    Retrieving file: pxelinux.cfg/default-arm
    No ethernet found.
    missing environment variable: bootfile
    Retrieving file: pxelinux.cfg/default
    No ethernet found.
    Config file not found
    No ethernet found.
    No ethernet found.
    => 

 

Edited by Igor
spoilers

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
0