nopnop2002 Posted February 17, 2019 Posted February 17, 2019 I installed Armbian_5.75_Orangepizeroplus2-h3_Debian_stretch_next_4.19.20. But it can't boot up. These image can boot up. Armbian_5.65_Orangepizeroplus2-h3_Debian_stretch_next_4.14.78 Armbian_5.69_Orangepizeroplus2-h3_Debian_stretch_next_4.19.13
yam1 Posted February 17, 2019 Posted February 17, 2019 I have been having the same problem for a number of images, I ended up having to add a user patch to use the uboot in May.
Igor Posted February 17, 2019 Posted February 17, 2019 We need full log, not just the (non relevant) end.
nopnop2002 Posted February 17, 2019 Author Posted February 17, 2019 (edited) Spoiler U-Boot SPL 2018.11-armbian (Feb 08 2019 - 11:34:49 +0100) DRAM: 512 MiB Trying to boot from MMC1 U-Boot 2018.11-armbian (Feb 08 2019 - 11:34:49 +0100) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Zero Plus 2 DRAM: 512 MiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 Loading Environment from EXT4... ** File not found /boot/boot.env ** ** Unable to read "/boot/boot.env" from mmc0:1 ** In: serial Out: serial Err: serial Net: No ethernet found. 230454 bytes read in 29 ms (7.6 MiB/s) starting USB... USB0: USB EHCI 1.00 USB1: USB OHCI 1.0 USB2: USB EHCI 1.00 USB3: USB OHCI 1.0 USB4: USB EHCI 1.00 USB5: USB OHCI 1.0 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found scanning bus 4 for devices... 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Autoboot in 1 seconds, press <Space> to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3798 bytes read in 24 ms (154.3 KiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 179 bytes read in 19 ms (8.8 KiB/s) 4922074 bytes read in 271 ms (17.3 MiB/s) 7323200 bytes read in 390 ms (17.9 MiB/s) Found mainline kernel configuration ** File not found /boot/dtb/sun8i-h3-orangepi-zero-plus2.dtb ** libfdt fdt_check_header(): FDT_ERR_BADMAGIC No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! 504 bytes read in 214 ms (2 KiB/s) Applying kernel provided DT overlay sun8i-h3-usbhost2.dtbo No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! 504 bytes read in 213 ms (2 KiB/s) Applying kernel provided DT overlay sun8i-h3-usbhost3.dtbo No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! Error applying DT overlays, restoring original DT ** File not found /boot/dtb/sun8i-h3-orangepi-zero-plus2.dtb ** ## Loading init Ramdisk from Legacy Image at 43300000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 4922010 Bytes = 4.7 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ERROR: Did not find a cmdline Flattened Device Tree Could not find a valid device tree SCRIPT FAILED: continuing... switch to partitions #0, OK mmc1(part 0) is current device Scanning mmc 1:1... Device 0: device type unknown ... is now current device No ethernet found. missing environment variable: pxeuuid missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/000000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/0000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/000 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/00 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/0 No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm-sunxi No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/default-arm No ethernet found. missing environment variable: bootfile Retrieving file: pxelinux.cfg/default No ethernet found. Config file not found No ethernet found. No ethernet found. => Edited February 18, 2019 by Igor spoilers
Igor Posted February 18, 2019 Posted February 18, 2019 OK, bug fixed. Try:https://dl.armbian.com/orangepizeroplus2-h3/Debian_stretch_next.7z
Milad Posted December 18, 2019 Posted December 18, 2019 On 2/18/2019 at 12:01 PM, Igor said: OK, bug fixed. Try:https://dl.armbian.com/orangepizeroplus2-h3/Debian_stretch_next.7z Hello Igor i have same problem, but not fixed with your solution
Igor Posted December 18, 2019 Posted December 18, 2019 11 hours ago, Milad said: but not fixed with your solution True, it's broken. Working on a better solution, testing at this moment. @Milad Images on the download section has been updated.
Milad Posted December 20, 2019 Posted December 20, 2019 On 12/19/2019 at 12:42 AM, Igor said: True, it's broken. Working on a better solution, testing at this moment. @Milad Images on the download section has been updated. It worked well. thanks for your help 1
Recommended Posts