All Activity

OMG Thank you!!! Yes this works. This is very exciting, so glad to have a recent image working on the opiz3

Description phytium_embedded: update kernel config from phytium repo. The kernel repository has patched the rtw88 driver, so set EXTRAWIFI="no". How Has This Been Tested? [x] Successfully built. [x] System startup. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

@sasa Many thanks for pointing out that analog sound just has to be enabled! I just tested and it works. I was dreading trying to debug kernel code when I should have been looking at the fundamental "is it turned on?" I will try the patch to remove the other sound error. As to automatic detection, yes on my orangepizero3 with H618 Allwinner SOC, HDMI detects the monitor and sets the proper resolution.

Hi, I think these messages are not related to analog audio, at least on my custom board with t507 processor, analog audio works with this error. You can simply disable them as it was in the linux kernel 6.1 The sound works for me if I turn it on in the mixer It’s strange, but I have another problem - the sound does not work through HDMI and there is also a problem with reading EDID through the DDC interface. I would be grateful if you could tell me whether automatic detection of monitor or TV resolution via HDMI works for you.

Enable bcachefs filesystem support in rk3588 kernel config (copied from armbian rockpro64 edge config). Description This adds support for the bcachefs filesystem in the rk3588 edge kernel config. Bcachefs is a new and exciting filesystem that is similar to btrfs / zfs, but simpler to use. The relevant kernel options were already in other configs, such as the rockpro64 edge config, but not in the rk3588 edge one. This needs kernel version 6.7+. How Has This Been Tested? custom kernel build Checklist: Please delete options that are not relevant. [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Hey @jock I guess I find the problem... There is no more focal repo anymore: http://armbian.tnahosting.net/apt/dists Thats's explains the erros bellow: E: The repository 'http://apt.armbian.com focal Release' does not have a Release file. [🐳|🚸] Command failed, retrying in 5s [ chroot_sdcard_apt_get_update ] [🐳|🔨] Hit:2 http://ports.ubuntu.com focal InRelease [🐳|🔨] Hit:3 http://ports.ubuntu.com focal-security InRelease [🐳|🔨] Hit:4 http://ports.ubuntu.com focal-updates InRelease [🐳|🔨] Ign:1 http://armbian.tnahosting.net/apt focal InRelease [🐳|🔨] Hit:6 http://ports.ubuntu.com focal-backports InRelease [🐳|🔨] Err:5 http://xogium.performanceservers.nl/apt focal Release [🐳|🔨] 404 Not Found [IP: 198.140.141.60 80] [🐳|🔨] Reading package lists... [🐳|🔨] E: The repository 'http://apt.armbian.com focal Release' does not have a Release file. [🐳|🚸] Command failed, retrying in 5s [ chroot_sdcard_apt_get_update ] [🐳|🔨] Hit:2 http://ports.ubuntu.com focal InRelease [🐳|🔨] Hit:3 http://ports.ubuntu.com focal-security InRelease [🐳|🔨] Hit:4 http://ports.ubuntu.com focal-updates InRelease [🐳|🔨] Ign:1 http://armbian.tnahosting.net/apt focal InRelease [🐳|🔨] Hit:5 http://ports.ubuntu.com focal-backports InRelease [🐳|🔨] Err:6 http://mirrors.jevincanders.net/armbian/apt focal Release [🐳|🔨] 404 Not Found [IP: 172.93.158.60 80] [🐳|🔨] Reading package lists.. [🐳|🔨] E: The repository 'http://apt.armbian.com focal Release' does not have a Release file.

jammy works fine too.. ls -lah total 909348 drwxr-xr-x 2 root root 4096 mai 8 14:23 . drwx------ 7 root root 4096 mai 8 14:17 .. -rw-rw-r-- 1 root root 931135488 mai 8 14:12 Armbian-unofficial_24.2.0-trunk_Rk322x-box_jammy_legacy_4.4.194_minimal.img -rw-rw-r-- 1 root root 199 mai 8 14:13 Armbian-unofficial_24.2.0-trunk_Rk322x-box_jammy_legacy_4.4.194_minimal.img.sha -rw-rw-r-- 1 root root 19758 mai 8 14:12 Armbian-unofficial_24.2.0-trunk_Rk322x-box_jammy_legacy_4.4.194_minimal.img.txt

🤷‍♂️ perhaps; the branch is at an old period in time and has not been updated anymore, so anything could be...

@SUPAThere is a lot more to building a system than just the kernel. That is what Armbian tries to do for you. I recommend that you use the Armbian build system. You should be able to build the system that you want. The audio patches do include analog audio, but to date there is still a problem and it does not start up. The armbian-config procedure has options to load kernel headers and also source.

Hello, Has anyone solved compiling kernel > 6 for Radxa CM3?

hey @jock Bullseye builded flawlessly! [🐳|🌱] Done building [ Armbian-unofficial_24.2.0-trunk_Rk322x-box_bullseye_legacy_4.4.194_minimal.img ] [🐳|🌱] SHA256 calculating [ Armbian-unofficial_24.2.0-trunk_Rk322x-box_bullseye_legacy_4.4.194_minimal.img ] [🐳|🌱] Fast-moving file to output/images [ -> Armbian-unofficial_24.2.0-trunk_Rk322x-box_bullseye_legacy_4.4.194_minimal.img (1.01GiB) ] [🐳|🌱] Fast-moving file to output/images [ -> Armbian-unofficial_24.2.0-trunk_Rk322x-box_bullseye_legacy_4.4.194_minimal.img.sha (202.00B) ] [🐳|🌱] Fast-moving file to output/images [ -> Armbian-unofficial_24.2.0-trunk_Rk322x-box_bullseye_legacy_4.4.194_minimal.img.txt (19.32KiB) ] [🐳|🌿] Unmounting recursively [ SDCARD rootfs finished - be patient ] [🐳|🌿] Done building image [ rk322x-box ] [🐳|🌱] Runtime [ 56:25 min ] [🐳|✨] Repeat Build Options [ ./compile.sh BOARD=rk322x-box BRANCH=legacy BUILD_DESKTOP=no BUILD_MINIMAL=yes INSTALL_HEADERS=yes KERNEL_CONFIGURE=yes KERNEL_KEEP_CONFIG=yes RELEASE=bullseye ] [🐳|🌱] Cleaning up [ please wait for cleanups to finish ] [🐳|🌿] ANSI log file built; inspect it by running: [ less -RS output/logs/log-build-fed9ae1d-0478-4643-a1de-606d2a7197e5.log.ans ] [🐳|🌿] Share log manually (or SHARE_LOG=yes): [ curl --data-binary @output/logs/log-build-fed9ae1d-0478-4643-a1de-606d2a7197e5.log.ans https://paste.armbian.com/log ls output/images/ -lah total 896M drwxr-xr-x 2 root root 4.0K May 8 16:23 . drwxr-xr-x 7 root root 4.0K May 8 15:31 .. -rw-rw-r-- 1 root root 1.1G May 8 16:23 Armbian-unofficial_24.2.0-trunk_Rk322x-box_bullseye_legacy_4.4.194_minimal.img -rw-rw-r-- 1 root root 202 May 8 16:23 Armbian-unofficial_24.2.0-trunk_Rk322x-box_bullseye_legacy_4.4.194_minimal.img.sha -rw-rw-r-- 1 root root 20K May 8 16:23 Armbian-unofficial_24.2.0-trunk_Rk322x-box_bullseye_legacy_4.4.194_minimal.img.txt So I guess there is a problem with focal release?

Description Today many users get their rock5c/lite. And they find some rk3582 socs has disabled rkvdec nodes. The board I have has good rkvdec nodes, but when there is at least one rkvdec node disabled, node rkvdec-ccu should get disabled. Otherwise this will cause board not booting. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh BOARD=rock-5c BRANCH=vendor BUILD_DESKTOP=no BUILD_MINIMAL=yes DEB_COMPRESS=xz KERNEL_CONFIGURE=no RELEASE=bookworm KERNEL_GIT=shallow [x] Tested on board with broken rkvdec nodes. Checklist: Please delete options that are not relevant. [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Refer to https://docs.armbian.com/User-Guide_Allwinner_overlays/ The file sun50i-h616-w1-gpio.dtbo should be copied to /boot/overlay-user/ and /boot/armbinaEnv.txt should be to contain for DS18B20 connected to GPIO 74/PC10 user_overlays=w1-gpio param_w1_pin=PC10 param_w1_pin_int_pullup=1

I found information that this is a dtc issue. The error can be suppressed with -W no-unit_address_vs_reg, for example: dtc -W no-unit_address_vs_reg -O dtb -o sun50i-h616-w1-gpio.dtbo sun50i-h616-w1-gpio.dts or warning can be squashed by adding #address-cells and #size-cells

You need to Mount the boot partition to edit it. ├─mmcblk0p1 179:97 0 256M 0 part /boot Put the SD card on a x86 linux and edit the DTB file

No descriptionView the full article

@ag123 @OttawaHacker I saw community builds already generated here. I could check that they have u-boot DRAM patch, so I tried both of them in my board, and they boot normally 🙂 also minimal one having HDMI output.

Thank you! https://github.com/armbian/os/pull/184 In case anyone can verify if this works / test this assembly, before end of this month, it would be awesome! Edit: tested

https://forum.armbian.com/topic/16976-status-of-armbian-on-tv-boxes-please-read-first/

type id and look at the groups you are in then ls -l and/or ls -ld and look at the owners and permissions for the files in your home folder the owners and group should match that in id otherwise you can probably change them using chown , chown -R , chmod etc. for rsync, scp etc, you probably need to use a same username across different hosts in a sense that it should remote login to your Orange Pi host using ssh with that username.

Much better, but still warning: sun50i-h616-w1-gpio.dts:20.35-26.27: Warning (unit_address_vs_reg): /fragment@1/__overlay__/onewire@0: node has a unit name, but no reg or ranges property

Tested on Rock5b: Needed to solve apparmor warning : Check that extraargs=systemd.unified_cgroup_hierarchy=0 apparmor=1 security=apparmor in /boot/armbianEnv.txt Then update-initramfs -u reboot