SBC News

Description This change includes kernel patches to provide the following overlays when using armbian-config on the Orange Pi Zero 2 and Orange Pi Zero 3 boards. I2C IR USB OTG SPI UART These boards share very similar SOCs (RH616 / RH618), and the existing configuration that was also shared with the bigtreetech board did not function correctly for the Orange Pi Zero 2/3 boards, so the Zero 2/3 board overlay configuration was split out into its own files, and the board configurations updated to reference the new overlays. Note: The patches for these overlays have been added to the 6.1, 6.6 (current), and 6.7 (edge) patch directories but it appears the 6.1 code may not b…

In my initial commit I assumed CONFIG_USE_PREBOOT=y was enabled by default. I was wrong. As reported by MicroLinux (Salva) on DISCORD the unit was still having issues booting. I sent him a patch I use which enables preboot and he reported back that "It boots fine now". NOTES: The patch he tested also had boot logo support enabled. In my testing boot logo support is not required. If for some reason in the future there are still eMMC boot issues, than maybe adding a slight delay "sleep 2" to preboot would suffice. https://github.com/armbian/build/pull/5858 Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own c…

Description now that 6.6.y is -current.. Need to add -current as a build target. tested works.. 6.7.0 -edge is weird-broken. but that's for discussion here. View the full article

Description We have an arg UBOOT_MIRROR and it can be set to gitee to use mirror https://gitee.com/mirrors/u-boot.git. We have to fix Makefile url for it. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] PREFER_DOCKER=no ./compile.sh uboot BOARD=fl700n BRANCH=edge UBOOT_MIRROR=gitee. fl700n is a board using uboot config firefly-rk3288_defconfig I am playing these days. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ]…

Update maintainers and board status synced status from the database rename to .csc where we don't have anyone If you want to become a board maintainer, adjust data here. Ref: Board Maintainers Procedures and Guidelines View the full article

With many dedicated souls willing to endure a FOSDEM queue, Collabora's engineers will be giving 6 talks spread out amongst multiple devrooms including Open Media and Testing & Continuous delivery. View the full article

PWM controllable fan (G12A/B/SM1) Commit provides two new overlays. One for the BananaPi CM4IO Baseboard "GPIOH_5" and another for general use "GPIOX_5". CM4IO HEADER PINS: 5V "4"; GND "6"; PWM "7" On other units the location of the PWM HEADER PIN may vary, so users will need to either review the wiki or schematic of said unit. Fan used in testing: https://a.co/d/hasnLtj Modifications: M2S/M5 RTL8822CS Modded the overlays to be specific to the unit they were made to be used on. Tested-on: BananaPi BPI-CM4IO Baseboard with BPI-CM4 Module [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented m…

Dear Armbian Community, Let’s welcome 2024! As always, we are committed to providing you with the latest updates and improvements to enhance your Armbian experience. Here’s a roundup of recent developments: Armbian Build Framework The Armbian build framework has been extended with official Github action scripts. These scripts make image re-compilation for your hardware a breeze, allowing you to choose different configurations with or without customization. Check it out on the GitHub Marketplace. Kernel Upgrades We have completed kernel upgrades for the current kernel selection. The default upcoming kernel on most platforms will now be based on the most recent LTS kerne…

Description Fix compilation of the uwe5622 driver with fortify enabled. Currently I get the following error: [🔨] In function 'strncpy', [🔨] inlined from 'sprdwl_cfg80211_scan' at drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c:1541:4: [🔨] ./include/linux/fortify-string.h:144:17: error: call to '__write_overflow' declared with attribute error: detected write beyond size of object (1st parameter) [🔨] 144 | __write_overflow(); [🔨] | ^~~~~~~~~~~~~~~~~~ [🔨] make[8]: *** [scripts/Makefile.build:243: drivers/net/wireless/uwe5622/unisocwifi/cfg80211.o] Error 1 It seems that fortify considers the 0 sized array at the end…

Description As per title + leave defaults as is. Jira reference number AR-2027 How Has This Been Tested? [x] Making one image Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

One of the key high-level challenges of building Mesa drivers these days is figuring out how to best share code between a Vulkan driver and a Gallium driver when Gallium isn't really capable of implementing Vulkan. Here's how. View the full article

Update maintainers and board status synced status from the database rename to .csc where we don't have anyone If you want to become a board maintainer, adjust data here. Ref: Board Maintainers Procedures and Guidelines View the full article

Description Status change. View the full article

Bumps actions/upload-artifact from 4.0.0 to 4.1.0. Release notes Sourced from actions/upload-artifact's releases. v4.1.0 What's Changed Add migrations docs by @​robherley in actions/upload-artifact#482 Update README.md by @​samuelwine in actions/upload-artifact#492 Support artifact-url output by @​konradpabjan in actions/upload-artifact#496 Update readme to reflect new 500 artifact per job limit by @​robherley in actions/upload-artifact#497 New Contributors @​samuelwine made their first contribution in actions/upload-artifact#492 Full Changelog: https://github.com/actions/upload-artifact/compare/v4...v4.1.0 Commits 1eb3cb2 Merge pull request #497 from actions…

Description Allow to disable boot partition by explicit BOOTSIZE=0. This would help when bootloader known to support rootfs FS. Allow image_size < rootfs_size for (potentially compressed) btrfs. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Built compressed btrfs-rootfs image with FIXED_IMAGE_SIZE=$((rootfs_size/2)) and without boot partition Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresp…

Description There is an orbiting patch that adds True Random Number Generator (TRNG) completing the rockchip mainline crypto driver. This PR introduces the patch (which is in RFC condition, thus passible of changes) with these benefits: provides better entropy (see below) removes the memory region claim error in dmesg is almost in mainline Some caveats: the existing driver covers rk3288 (32 bit, not applicable in this context), rk3328 and rk3399, but only rk3399 seems to have working hardware. For the other two chips, the TRNG is just disabled. How Has This Been Tested? [x] Current 6.6 kernel packages built and installed on live system (rk3399) [x] Edge 6.7 kernel pa…

khadas-vim3: bump to u-boot v2024.01; boot-usb-first patch in board folder khadas-vim3: bump to u-boot v2024.01; boot-usb-first patch in board folder patch is slightly different for 2024.01 View the full article

wsl2: vhd/vhdx exts; more wsl2 kernel stuff linux-wsl2-x86-edge.config: enable moar Hyper-V stuff & console as builtin extensions: image-output-vhd renamed to image-output-vhd-azure only Azure wants the static, 1024-aligned original VHD images (and doesnt support VHDX?) new VHDX output format (for generic Hyper-V on Windows 10/11/2019/etc) extensions: image-output-vhdx: add output for dynamic .vhdx (in a zip file, to avoid sparseness errors) new VHDX output format (for generic Hyper-V on Windows 10/11/2019/etc) it is always stored (no compression) in a .zip file, to avoid sparseness errors when building, transfer the .zip file over to Windows, and uncompress it t…

bcm2711: switch to 48-bit virtual address; enable "docker optimizations" bcm2711-edge: switch to 48-bit virtual address; enable eBPF stuff & BTF for tcmalloc (enjoy, cilium, etc) stuff https://github.com/cilium/cilium/issues/23640 see https://github.com/libbpf/libbpf#bpf-co-re-compile-once--run-everywhere bcm2711-current: switch to 48-bit virtual address; enable eBPF stuff & BTF for tcmalloc (enjoy, cilium, etc) stuff https://github.com/cilium/cilium/issues/23640 see https://github.com/libbpf/libbpf#bpf-co-re-compile-once--run-everywhere bcm2711: cmdline.txt: enable "docker optimizations" most u-boot based boards get cgroup_enable=cpuset cgroup_memory=1 cg…

meson64: 6.7 edge: real bump to 6.7 meson64: 6.6 current: added -spidev DT's for a few boards & cleanup 0000.patching_config.yaml gives access to SPI Flash in exchange for slower eMMC cleanup 0000.patching_config.yaml for meson64-6.6 meson64: 6.7 edge: copy patches from 6.6 meson64: 6.7 edge: rebase patches to 6.7 general-rc-drivers-should-produce-alternate-pulse-and-space-timing-events.patch: dropped added -spidev DT's for a few boards (gives access to SPI Flash in exchange for slower eMMC) cleanup 0000.patching_config.yaml for meson64-6.7 meson64: 6.7 edge: fix SPI-NOR patch for 6.7.y general-spi-nor-add-support-for-XT25F128B.patch: fixed same as Paolo did f…

Description Forgot to shift kernel configs for rockchip family when switching current to 6.6 and edge 6.7; done right now. Curiously I noticed this after hitting "buggy" behaviour on rk322x board with several rcu_scheduler debug messages while board was under high load, vnstatd process was often at 100% cpu usage and reading /proc/net/dev file (which is a simple text file with some network interface stats) stalls vnstatd. Turning off eth0 interface solved the problem but of course it was not solution. I shifted the kernel config, recompiled kernel 6.6 and this apparently solved the problem (maybe thanks to CONFIG_NEED_SRCU_NMI_SAFE=y ?) If it is so, the consideration …

Description Ubuntu variants were somehow forgotten when adding systemd-resolved in https://github.com/armbian/build/pull/6142 Jira reference number AR-1657 How Has This Been Tested? [x] Generating Ubuntu Jammy image Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description As per subject: bump rockchip64 current kernel to 6.6 and edge kernel to 6.7 Jira reference number AR-2017 How Has This Been Tested? [ ] Compile kernel deb packages for 6.6 [ ] Compile kernel deb packages for 6.7 [ ] Build image and test with kernel 6.7 for rk3328 board [ ] Build image and test with kernel 6.7 for rk3399 board Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and…

Description Add new borad of ASUS Tinker-Edge-R. ASUS Tinker Edge R is an Single Board Computer (SBC) specially designed for AI applications. I've written the device tree file for it, added the u-boot config file, and I've done the current version adaptation. Jira reference number [AR-9999] How Has This Been Tested? [x] UART test. The serial port output is printed through UART, and there are almost no errors in the armbian boot log. [x] Stability testing. Let the CPU run the specified task all the time, and the test will be conducted for 48 hours without any error. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review …

Description rtl8723cs driver need some little changes to compile on kernel 6.7; it was breaking rockchip and allwinner families This pull request contains those changes. Jira reference number AR-2025 How Has This Been Tested? [x] Patch applies correclty on kernel 6.7 [x] Kernel deb packages correctly built Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules …

Collabora's kernel team made a number of key contributions including a new kselftest for verifying driver probe of Devicetree-based platforms, multiple improvements to further improve support for MediaTek SoCs found in Chromebooks, and more. View the full article

Description Bump all mainline based kernels. How Has This Been Tested? [ ] Build test within CI Checklist: [x] My code follows the style guidelines of this project [ ] My changes generate no new warnings View the full article

Create a overlay_prefix to h616 for orangepizero3. Description There are no overlays nor fixup scripts for h618. Since the orangepizero3 is i/o hardware identical to the orangepizero2, it makes sense to just point the zero3 to the zero2 overlays. Jira reference number [AR-9999] How Has This Been Tested? An image for orangepizero3 with this change was generated. It ran the fixup script on boot. Armbian-config -> System-> Hardware was used to enable an spidev. On reboot the overlay was loaded. Checklist: [x ] My code follows the style guidelines of this project [ x] I have performed a self-review of my own code [ x] I have commented my code, particularly in hard…

This does not change the current boot order and requires additional hardware. Hardware used in my testing: BananaPi BPI-CM4IO Baseboard with BPI-CM4 Module Mini PCI-E PCI Express to SATA 3.0 Dual Ports Adapter Converter Hard Drive Extension Card https://a.co/d/0G679qW Kingston 120GB A400 SATA 3 2.5" Internal SSD https://a.co/d/fB2qf3r External power supply for Hard Drive 2.5" 3.5" https://www.ebay.com/itm/114620135743 bananapi: ~ $ lspci 00:00.0 PCI bridge: Synopsys, Inc. DWC_usb3 / PCIe bridge (rev 01) 01:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 02) bananapi: ~ $ sudo blkid /dev/mmcblk1p1: LABEL="EMMC" UUID="67ea5c62-c9cb-4…

Description Migrate the Banana Pi R2 Pro from the media family to the rockchip64 family. Also migrate to upstream u-boot which added support for this board in its latest release. How Has This Been Tested? Compiled a desktop image, wrote it on an sdcard, booted and tested everything is functional on the bpi-r2-pro. ./compile.sh BOARD=bananapir2pro BRANCH=edge RELEASE=trixie BUILD_MINIMAL=no BUILD_DESKTOP=yes DESKTOP_ENVIRONMENT=xfce DESKTOP_ENVIRONMENT_CONFIG_NAME=config_base DESKTOP_APPGROUPS_SELECTED=none KERNEL_CONFIGURE=no Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [ ] I have commented my co…

Description @lujianhua has just pushed two commits enabling 120Hz panel: https://gitlab.com/sm8250-mainline/linux/-/tree/sm8250/v6.7?ref_type=heads This pr also rebased the xiaomi keyboard related patches to his branch, although keyboard is still not working. Enable CONFIG_HIDRAW because I find it is necessary for yuzu emulator to detect nintendo switch pro controller. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh kernel BOARD=xiaomi-elish BRANCH=sm8250 DEB_COMPRESS=xz [x] Xiaomi elish boots with 120Hz. Checklist: [x] My code follows the styl…

Description Update symlink for bluetooth firmware on JetHub D1 Jira reference number AR-2022 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] JetHub D1 build and run ok Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description As per subject, move rockchip current to 6.6 and edge to 6.7. Some rework has to be done, in particular a LE patch has been fully merged (linux-0020) and can be remove and rockchip DFI driver has been heavily modified, so requires some patient work to be reinstated. Jira reference number AR-2016 How Has This Been Tested? [x] Compile rockchip 6.6 kernel [ ] Compile rockchip 6.7 kernel Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no n…

Description In several situations we need to have systemd-resolved installed and configured or we loose DNS. This happens in case of HA and most likely OMV too. As per documentation: systemd-resolved will work out of the box with a network manager using /etc/resolv.conf. No particular configuration is required since systemd-resolved will be detected by following the /etc/resolv.conf symlink. This is going to be the case with systemd-networkd, NetworkManager, and iwd. move DNS server set from Ubuntu specifics change switch to if and check for DISTRIBUTION instead of RELEASE detach bullseye so we can keep it operational without systemd-resolved change bullseye to EOS Ins…

Description Rewrite patches since we have stable git hash length KERNELPATCHDIR is no longer $LINUXFAMILY-$BRANCH, so declare it in board config file Bump kernel to 6.7.y Add support for nintendo pro/joycon controller since this device can run yuzu emulator well. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh kernel BOARD=xiaomi-elish BRANCH=sm8250 DEB_COMPRESS=xz KERNEL_GIT=shallow [x] Xiaomi elish boots fine Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have comm…

Description duplicated existing SATA2 overlay for SATA1 used on Rock5b and probably others. I know in the legacy kernel the equivalent patch is board specific, but will stay generic for now.. plus I didn't see where to disable wifi or BT interrupts in current device tree. working with port multiplier root@rock-5b:~# uname -a Linux rock-5b 6.7.0-rc8-edge-rockchip-rk3588 #4 SMP PREEMPT Sun Dec 31 20:51:25 UTC 2023 aarch64 GNU/Linux root@rock-5b:~# dmesg|fgrep -i sata [ 0.890642] ahci-dwc fe220000.sata: supply ahci not found, using dummy regulator [ 0.891363] ahci-dwc fe220000.sata: supply phy not found, using dummy regulator [ 0.892281] platform fe220000.sata:sa…

Description made overlay to enable spi flash on rock5b based on https://github.com/Googulator/linux-rk3588-midstream/blob/adbadbf32e87b308688136aa55c03b1bed6f7e03/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts#L704C1-L724C4 root@rock-5b:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS mtdblock0 31:0 0 16M 0 disk mmcblk1 179:0 0 59.7G 0 disk ├─mmcblk1p1 179:1 0 256M 0 part /boot └─mmcblk1p2 179:2 0 58.8G 0 part /var/log.hdd / zram0 251:0 0 3.8G 0 disk [SWAP] zram1 251:1 0 50M 0 disk /var/log zram2 251:2 0 0B 0 disk nvme0n1 259:0 0 238.5G 0 disk └─n…

Description Digging and reworking this https://github.com/armbian/build/pull/6100 while (de)attaching to new LTS kernel. Jira reference number AR-2005 How Has This Been Tested? Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Other devices could be added if whatever the regulator needed for UHS is enabled. Read perf def improved on the gnome disk benchmarks. Jira reference number [AR-9999] let's enable salva's UHS overlay for RK3399 tested on PBP with 2ghz with 64 gig samsung evo select i like using the yabs.sh fio benchmark for mixed r/w tests curl -sL yabs.sh | bash -s -- -i -g -n also did gnome disk utility read benchmark before kernel 6.6.10 yabs # ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## # # Yet-Another-Bench-Script # # v2024-01-01 # # https://github.com/masonr/yet-another-bench-script # # ## ## …

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no ne…

We need to slow down to HS200 for stable emmc. Add tsadc node for temp sensor. Add power off fix from mail list Description How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh kernel BOARD=rock-5b BRANCH=edge DEB_COMPRESS=xz KERNEL_GIT=shallow [x] emmc is stable, cpu temp is shown from command sensors, and command poweroff is working. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made correspondin…

Description Hinlink H88K mainline support with: [x] one HDMI port output like other rk3588 boards such as rock5b(middle HDMI port ) [x] two 2.5G RTL8125 ethernet [x] usb A ports [x] audio jack output [x] m.2 E slot wifi [x] HS200 emmc [x] TF card copied from rock5b should work, not tested How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh BOARD=hinlink-h88k BRANCH=edge BUILD_DESKTOP=yes BUILD_MINIMAL=no COMPRESS_OUTPUTIMAGE=sha,gpg,xz DEB_COMPRESS=xz DESKTOP_APPGROUPS_SELECTED='3dsupport desktop_tools editors multimedia office remote_desktop' DESK…

Description thead: add current kernel support. How Has This Been Tested? [x] Successfully built. [x] System startup. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Debian sid desktops have been failing to build for a while due to a dependency issue with ghostscript-x this package has been abandoned... or mostly abandoned.. see Debian Bug #1022718 Removed package from base desktop package lists... Resolves error message below The following packages have unmet dependencies: ghostscript-x : Depends: ghostscript (= 10.01.2~dfsg-1) but 10.02.1~dfsg-1 is to be installed E: Unable to correct problems, you have held broken packages. tested with ./compile.sh build BOARD=pinebook-pro BRANCH=edge BUILD_DESKTOP=yes \ DESKTOP_APPGROUPS_SELECTED='3dsupport browsers internet multimedia' DESKTOP_ENVIRONMENT=cinnamon \ DE…

Description The Orange Pi Zero 3 board was recently added as a WIP configuration, and through testing it was determined that the CPU frequency configuration was not working for this board, but was working correctly for the Orange Pi Zero 2. Further investigation determined that the h618 CPU (which differs from the Zero 2 h616) was not in the allow list in the CPU frequency kernel driver. This PR updates both the current and edge sunxi kernel configurations with a patch that enables the h618 device in the configuration whitelist. The goal of this patch was to make the smallest change possible change to the driver code to enable the capability for the Zero 3. In the code, …

Description thead: update edge kernel to 6.7-rc8 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description update overlay prefix due to SoC family change remove rkbin repo override now that armbian rkbin repo has blobs install headers by default on both boards View the full article

Description The raspberry pi images were broken since #6087 as armbian.list was no longer available to install the required packages. As the description for #6087 mentioned that the change was just to remove the dormant armbian.list.disabled file, this PR does the same simply by removing the file if its present after image-late. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Tested creating Raspberry pi images and also verifying that there is no leftover armbian.list.disabled file. Checklist: [ ] My code follows the style guidelines of this project [ ] I h…

Description We already set to Armbian, but we didn't set default link. This fixes it for both, Debian and Ubuntu. Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number AR-2012 Close https://github.com/armbian/build/issues/6118 How Has This Been Tested? [ ] Make an upgrade and see if it get fixed. Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the…

mangopi-m28k is rk3528 new mini sbc box. The following hardware features are supported： 1.Two Gb ethernet（one gmac another is pcie） 2.Two usb 2.0 type A connecter 3.wifi6 aic8800 4.lpddr4（1-4GB）emmc（8-32）TF 5.micro hdmi connecter 6.IR Receiver 7.user uart/spi/iic extended interfaces 8.pd power View the full article

Description The schedutil cpu frequency governor is more tightly coupled to userspace activity and performs more granular cpu frequency changes. I've personally be using it for years. I think it's prudent to change to this default.. especially given cpu-frequency utils is deprecated and no-longer enabled by default on armbian builds. I think if this is merged it's an opportunity to also remove some of the unmaintained on-demand governor tweaks in armbian-hardware-optimize as well. Quoting the kernel docs: This governor generally is regarded as a replacement for the older ondemand and conservative governors (described below), as it is simpler and more tightly in…

Description Expose rk322x-dmc driver load, upthreshold and downthreshold attributes via sysfs objects to monitor and manipulate dmc behaviour via userspace. Implemented only on edge 6.6 kernel, which will become current very soon. Tunables will be available in /sys/class/devfreq/11200000.dmc/device directory How Has This Been Tested? [x] Compiled kernel and tested on live system Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] A…

…et/browse/AR-1904 Description Using the Rock Pi S with 10mbps Ethernet connection is not possible. A connection is shown but data transmission is not possible. Note that this patch is only for the "current" kernel. The "edge" kernel no longer boots RockPI-S. Jira reference number AR-1904 How Has This Been Tested? Built 23.05 Minimal image for RockPI-S Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. Verified Ethernet transfer @100Mbit/s initially ethtool -s end0 advertise 3 Verified Ethernet transfer rate now only 10Mbit/s ethtool -s end0 advertise f Verified Ethernet transfer rate r…

Description We certainly don't need dual mode compilation while armbian_repo variant is anyway broken due to other changes. How Has This Been Tested? [x] Build Debian [x] Build Ubuntu and boot Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

hi, I recently bought an Orange Pi 5 Plus and the RTL8852BE wireless module (http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-R6.html). can I add a kernel module to run the RTL8852BE on the Orange Pi 5 Plus? Description Adding CONFIG_RTW89_8852BE to linux-rockchip-rk3588-edge.config How Has This Been Tested? built the img and booted it. checked that RTL8852BE is working (need firmware-realtek). Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code - [ ] I have commented my code, particularly in hard-to-understand areas - [ ] I have made corresponding changes to the docu…

Description Some users reported bluetooth not working sometimes after reboot. Turns out that sometimes hciattach binary that we use segfaults during reboot. Replacing the binary with the one present in orangepi_build repository as it seems it solves the issue. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Tested by the user by rebooting their device 5 times. Bluetooth worked fine consistently after every reboot. Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my cod…

Description Fixed the compilation issue with new khadas u-boot. The fix is actually quite ugly. We are now compiling u-boot twice, once with gcc 11.4 and then with linaro toolchain v7.3.1. Also as Linaro's compiler is only available for x86 platform, uboot for these boards will not build on arm platforms. But I guess we have to live with it for now. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Test building uboot for khadas vim1s Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I ha…

Description Cosmetic / syntax. Jira reference number AR-2010 Checklist: [x] My code follows the style guidelines of this project [x] My changes generate no new warnings View the full article

Description Userpatches folder is hard-coded in extensions loading. Jira reference number AR-2009 How Has This Been Tested? [x] Enable extension located in USERPATCHES_PATH (with PREFER_DOCKER="no") Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] My changes generate no new warnings View the full article

Description Bumped Allwinner edge kernel to 6.7-rc7 Added HDMI support for H616/H618 boards. The hdmi driver patch is based on changes from Orange Pi's 6.1 repo but is heavily modified to get applied on top of drm patches of megous tree. Removed 4.9 Orange Pi Zero 2 vendor kernel and legacy u-boot utilities Added WIP Orange Pi Zero3 board. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Testing current and edge kernel on Orange Pi Zero3 using XFCE desktop image [ ] Need someone to test on Orange Pi Zero2 Checklist: [ ] My code follows the style guidelines …

Description This will be our base for official build tool. Current variant has only enabled basic features which should be enough to push it to GitHub marketplace. Requirements. Jira reference number AR-1459 How Has This Been Tested? [ ] SDK image building Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description I'm rewriting patches with command PREFER_DOCKER=no ./compile.sh rewrite-kernel-patches BOARD=rock-5b BRANCH=edge on armbian jammy, but I get all commit index length changed from 12 to 13. Maybe that's because envirmonts are different between docker and bare metal. So add --abbrev=12 to always get commit index length 12. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] PREFER_DOCKER=no ./compile.sh rewrite-kernel-patches BOARD=rock-5b BRANCH=edge Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-revie…

odroidm1: set OVERLAY_PREFIX; rockchip64: default, but don't override, OVERLAY_PREFIX odroidm1: set OVERLAY_PREFIX; rockchip64: default, but don't override, OVERLAY_PREFIX View the full article

cleanup a few lost/old/forgotten/replaced code/patches [cleanup] extensions: flash-kernel: removed (and a few references to it) thanks to Gunjan for replacing it [cleanup] rk3399: remove defunct patches & dangling symlinks for rk3399-legacy and rk35xx-legacy [cleanup] rockchip64 legacy: remove long dead 4.4 patches (family/common didn't define legacy branch for a while) [cleanup] remove old rk35xx-4.19 archive patch folder that is unused View the full article

use hooks for main kernel/u-boot version defaulting/overriding; remove symlink usage from many families [cleanup] extensions: flash-kernel: removed (and a few references to it) thanks to Gunjan for replacing it [cleanup] rk3399: remove defunct patches & dangling symlinks for rk3399-legacy and rk35xx-legacy [cleanup] rockchip64 legacy: remove long dead 4.4 patches (family/common didn't define legacy branch for a while) core: semantic change, KERNELSOURCE must be explicitly 'none' to avoid kernel compilation (not unset) main-config: mark mirror variables readonly; add todo's lib/family config: remove resquices of KERNELDIR which is completely unused for a long time …

Update maintainers and board status synced status from the database rename to .csc where we don't have anyone If you want to become a board maintainer, adjust data here. Ref: Board Maintainers Procedures and Guidelines View the full article

uefi: rollover current to legacy, edge to current, bump edge to 6.7, fix drivers, remove symlinks uefi: common: stop using symlinks, instead point directly to KERNEL_MAJOR_MINOR uefi: common: drop kernel symlinks remove duplicate decls simplify some comments thinkpad-x13s: set explicit LINUXCONFIG to compensate for changes in uefi-common uefi: all: update all .config's, no changes; edge: 6.6.y; current 6.1.y; legacy 5.15.y uefi: all: rollover current 6.1.y to legacy, taking over 5.15.y uefi: all: rollover edge 6.6.y to current, taking over 6.1.y uefi-arm64 6.7: copy patches from 6.6 uefi: all: edge: bump to 6.7-rc7; arm64: fix Phytium stmmac patch (by Igor) Co-authore…

RFC: mixtile-blade3 / rockchip-rk3588 edge 6.7: add DT from Joshua Riek + some fixes mixtile-blade3 / rockchip-rk3588 edge 6.7: add DT (original from Joshua Riek) base for https://github.com/Joshua-Riek/linux/pull/1 mixtile-blade3 / rockchip-rk3588 edge 6.7: cleanups for Mixtile Blade3 arm64: dts: rockchip: cleanups for Mixtile Blade3 drop hym8563 pinctrl (don't think the blade3 has an RTC) i2c5 is exposed on the 30-pin, add comment fix tab in pcie30phy mixtile-blade3 / rockchip-rk3588 edge 6.7: pci3x4 for Mixtile Blade3 (rpardini's bad take) arm64: dts: rockchip: pci3x4 for Mixtile Blade3 pinctrl for 1 RK_PB2 pull_up regulator vcc3v3_pcie30 always-on and boot-on …

rockchip-rk3588 edge: bump to 6.7-rc7; add overlays rockchip-rk3588 edge 6.7-rc4: rewrite/rebase patches in the process, MAINTAINERS file patches are dropped rockchip-rk3588 edge 6.7: bump to 6.4-rc7; rebase patches rockchip-rk3588 edge 6.7: add overlay support; add rockchip-rk3588-sata2 overlay rockchip-rk3588 edge 6.7-rc7: update .config, no changes View the full article

Description Current kernel deb package script ignores localversion of linux-next like -next-20231222, which will not pass deb building. This commit will add this localversion when grabbing kernel version. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh kernel BOARD=rock-5b BRANCH=edge DEB_COMPRESS=xz KERNEL_GIT=shallow, tested with KERNELSOURCE changed to https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git. [x] Built kernel runs normally. [x] Normal non-next kernel source tested Checklist: [x] My code follows the style guideline…

Description Big pull request that consolidates rockchip 32bit and rk322x families together, for less painful kernel patch adaption during maintance cycles. Jira reference number AR-1988 Despite this is the minor nightmarish part of the rockchip patches archive, consolidation could and has been done. In particular, this PR do: merge patches from rockchip and rk322x families for current and edge kernels, moving everything into rockchipfamily migrate edge kernel rockchip-6.6 into patch series, rename all patches with more understandable names with alphabetical prefixes in place of numeric ones (sunxi inspired) implement new style dt and overlay directories for edge and …

Description This PR add some tweaks to get the current (and IMO best possible yet) configuration of the WDK. point to latest development branch which appears to be quite stable add package mtools to support mounting the EFI partition, enable mount add tweak to ensure qrtr-ns.service also runs, like protected-domain-mapper add board file with calibration data that work well with the QCNFA765 Wireless Network Adapter How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] built the image with ./compile.sh build BOARD=wdk2023 BUILD_DESKTOP=yes BUILD_MINIMAL=no DESKTOP…

https://github.com/armbian/build/pull/6053#issuecomment-1869032590 View the full article

Bumps tj-actions/changed-files from 40 to 41. Release notes Sourced from tj-actions/changed-files's releases. v41 Changes in v41.0.1 What's Changed Upgraded to v41 by @​tj-actions-bot in tj-actions/changed-files#1811 chore(deps): update dependency eslint-plugin-prettier to v5.1.2 by @​renovate in tj-actions/changed-files#1813 fix: update characters escaped by safe output by @​jackton1 in tj-actions/changed-files#1815 Full Changelog: https://github.com/tj-actions/changed-files/compare/v41...v41.0.1 Changes in v41.0.0 🔥 🔥 BREAKING CHANGE 🔥 🔥 A new safe_output input is now available to prevent outputting unsafe filename characters (Enabled by default). This would esc…

bcm2711: don't force SKIP_ARMBIAN_REPO=no; include bootloader fw in bsp-cli if set to yes bcm2711: don't force SKIP_ARMBIAN_REPO=no; include bootloader fw in bsp-cli if set to yes do not force SKIP_ARMBIAN_REPO=no anymore instead, if SKIP_ARMBIAN_REPO=yes: include the bootloader "fw" in bsp package, from Debian's raspi-firmware git source add Debian/Ubuntu-specific packages for Wifi/BT firmware For Ubuntu, include raspi-eeprom and raspi-config too (not available on Debian) tested on rpi4b (bookworm/mantic) - untested on rpi5b (I don't have/want one) View the full article

Description armbian.list generated two times on every build: when==image-early and when==image-late If when==image-early armbian.list renamed to armbian.list.disabled and this file goes to image. https://github.com/armbian/build/issues/6086 Jira reference number AR-2007 How Has This Been Tested? [X] Rebuild image, armbian.list.disabled disappears Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [X] Any dependent changes have been m…

Description Legacy - 5.15.x -> 6.1.x Current - 6.1.x -> 6.6.x Edge - 6.6.x -> 6.7-rc6 move kernel branch and minor definitions to config/sources/common.conf (this location was predicted to contain this) bump UEFI kernels fix Phytium patch compilation failure for 6.7.y removed old leftover kernel patch directories Jira reference number AR-2005 How Has This Been Tested? [x] Patching test Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no …

Description I noticed that I was not seeing many locales that were supposed to be shown during first login like en_IN for English India. I was only getting the following 3 options when choosing to get locales based on my location At your location, more locales are possible: 1) bhb_IN.UTF-8 2) tcy_IN.UTF-8 3) Skip generating locales Please enter your choice: This is because we were looking for .UTF-8 suffix in the locale names. But not all UTF-8 locales have that suffix. All UTF-8 locales do end with UTF-8 at the end. So now we are using the same. With the fix, I am now getting much better result. Here is the list after the fix for comparison At your location, more lo…

Description Bumping U-boot to 2024.01-rc5 for Allwinner boards. There were some defconfig patches that were failing, I have migrated them to board config file using post_uboot_config_target hook function. This has resulted into removal of several patches. There are still some defconfig patches left, I will move them as and when needed. Apart from that, updated crust support patches for Allwinner H3 as few of them had patch application failure. As U-boot now has AXP313 support, I have removed the patch for the same and have migrated Bigtreetech to use the upstream driver. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also …

Update maintainers and board status synced status from the database rename to .csc where we don't have anyone If you want to become a board maintainer, adjust data here. Ref: Board Maintainers Procedures and Guidelines View the full article

Description Swapped one tiny bit (really) to set ddrbin command rate to 2T instead of 1T for rk322x family. How Has This Been Tested? Untested Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Bump Allwinner kernels Legacy - 5.15.x -> 6.1.x Current - 6.1.x -> 6.6.x Edge - 6.6.x -> 6.7-rc6 Removed old leftover kernel patch directories. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Edge kernel builds with EXTRAWIFI=no. Some driver harness drivers including xradio, rtl8189es, rtl8189fs, rtl8812au, rtl8192eu and possibly others needs some fixes as compilation fails for the same. Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, p…

Dear Armbians, Can you smell the Christmas trees? The scent of pine and warmth fills the air As we gather around our devices, connected by a shared passion for innovation and open-source possibilities, it’s time to celebrate not just the festivities but also the incredible work we’ve made together. Here are the highlights for the end of the year! Updates and highlights: Odroid N2 and M1: We’re excited to announce the elevation of Odroid N2 and M1 to standard support, ensuring enhanced performance and stability. Raspberry Pi 5: Raspberry Pi 5 has been added to our standard support list! Liberating our users from Debian/Ubu…

Description Even though git shows a lot of changes, only change is putting the code in if block to make sure that we try to patch the system after we relaunch. Without this I got a password prompt on my MacBook as the system was trying to patch the MacOS. This can be closed if #6076 is ready Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full ar…

Weston 13.0 brings multiple fixes and important changes, notably the ability to load multiple backends simultaneously. This can be used to load VNC, RDP, or PipeWire backends for remote access alongside the native DRM backend. View the full article

Description Integrating deboostrap hack directly into build framework instead of having it as extension. better compatibility with host system support for Debian variants too doesn't break on making docker images future proof and auto-obsolete when host systems deboostrap version passes 1.0.128 Jira reference number AR-2004 How Has This Been Tested? [x] Generating Docker images [x] Generating Ubuntu noble Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] My changes generate no new warnings [ ] Any dependent changes have been…

Description Add support for armsom-sige7 board Dependencies required for this change：https://github.com/armbian/linux-rockchip/pull/131 armsom-sige7 related document links: How Has This Been Tested? Compile command: ./compile.sh 2.5Gb Network *2 ok Headphone ok usb 3.0 * 2 ok typec ok hdmi tx ok 40pin-Header ok LED ok debug ok Fan ok M2 E key ok Checklist: [√ ]My code follows the style guidelines of this project [√ ]I have performed a self-review of my own code [√ ]I have commented my code, particularly in hard-to-understand areas [√ ]I have made corresponding changes to the documentation [√ ]My changes generate no new warnings [√ ]Any dependent changes have been mer…

Description Ubuntu Noble is not yet in Jammy deboostrap. Lets patch the system with an extensions, so we con't mess up with a framework itself. This will eventually become deprecated anyway. Jira reference number AR-2004 How Has This Been Tested? [x] Manual run ./compile.sh ENABLE_EXTENSIONS="ubuntu-noble" Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Minor kernel bumps Legacy - 5.15.143 -> 5.15.144 Current - 6.1.68 -> 6.1.69 Edge - 6.6.7 -> 6.6.8 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Tested booting on Orange Pi Zero (sun8i H3) Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in down…

Description Necessary changes only to make repository work. There is probably lots of work to do laser... Jira reference number [AR-9999] How Has This Been Tested? Builds until the point where it tries to grab release file form apt repo which obviously fails. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Converted configuration for uwe5622 support to extension making it easier to add wifi and bluetooth support to boards with uwe5622 wireless module. Added the uwe5622 extension to Orange Pi Zero2. This should add bluetooth support to the same. Moved Orange Pi 3 LTS specific code out of the family config file Also for H6 based devices, switched to lightdm-gtk-greeter as slick-greeter shows weird artifacts Also added myself as maintainer for Orange Pi 3 and Orange Pi 3 LTS. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Tested wifi, bluetooth and …

Description The lm75 sensor was defined in the dts as "onnn,lm75". Set it to "national,lm75" as is set in the upstream dts. (there is no such thing as "onnn,lm75"). Later on (or maybe I should include it there) we should remove the lm75 module from MODULES and MODULES8lEGACY in config/boards/helios64.csc, as the DTS already loads it. (which makes me think "onnn,lm75" as a DTS node never was recognized by a kernel, thus the need to explicitly load lm75). How Has This Been Tested? [x] remove lm57 from the config (I believe it was /etc/modules but is long gone) and reboot with new dts Checklist: [x] My code follows the style guidelines of this project [x] I have perform…

Description Fix compilation warnings [🐳|🔨] CC arch/arm/mach-rockchip/boot_mode.o (...) [🐳|🔨] arch/arm/mach-rockchip/boot_mode.c: In function ‘rockchip_dnl_mode_check’: [🐳|🔨] arch/arm/mach-rockchip/boot_mode.c:174:24: warning: ‘return’ with a value, in function returning void [-Wreturn-type] [🐳|🔨] 174 | return 0; [🐳|🔨] …

As 2023 draws to a close, I wanted to give a quick update on NVK, what's happened this year, and where we'll be headed in 2024. While previous posts have focused primarily on the technical details, this post will be more geared towards users. View the full article

Description Switch back to Rockchip DDR binary for DDR initialization in u-boot for Helios64. I believe there is nothing board-specific about this memory initialization issue, but it might be no other Armbian board has this combination of rk3399 and LPDDR4. Else there is something specific about the memory set up on the Helios64 hardware. On the Helios64 random memory errors happens when using the U-Boot DDR intialization code for rk3399. Switching to the rkbin rk33 933MHz v1.25 allows this testcase to run more than once without a memory error: for i in $(seq 1 100);do python3 -c "import pkg_resources" || break;done Could be LPDDR4 specific. Workaround https://github…

Google Open Source have chosen their second group of winners for the 2023 Google Open Source Peer Bonus Program, and Arnaud Ferraris, Senior Software Engineer at Collabora and Mobian project lead, is among the recipients! View the full article

Description It breaks EDGE compilation as define was done only for legacy. How Has This Been Tested? Manual build. View the full article

Bumps github/codeql-action from 2 to 3. Release notes Sourced from github/codeql-action's releases. CodeQL Bundle v2.15.4 Bundles CodeQL CLI v2.15.4 (changelog, release) Includes the following CodeQL language packs from github/codeql@codeql-cli/v2.15.4: codeql/cpp-queries (changelog, source) codeql/cpp-all (changelog, source) codeql/csharp-queries (changelog, source) codeql/csharp-all (changelog, source) codeql/go-queries (changelog, source) codeql/go-all (changelog, source) codeql/java-queries (changelog, source) codeql/java-all (changelog, source) codeql/javascript-queries (changelog, source) codeql/javascript-all (changelog, source) codeql/python-queries (chan…

Bumps actions/upload-artifact from 3.1.3 to 4.0.0. Release notes Sourced from actions/upload-artifact's releases. v4.0.0 What's Changed The release of upload-artifact@v4 and download-artifact@v4 are major changes to the backend architecture of Artifacts. They have numerous performance and behavioral improvements. For more information, see the @​actions/artifact documentation. New Contributors @​vmjoseph made their first contribution in actions/upload-artifact#464 Full Changelog: https://github.com/actions/upload-artifact/compare/v3...v4.0.0 Commits c7d193f Merge pull request #466 from actions/v4-beta 13131bb licensed cache 4a6c273 Merge branch 'main' into v4-…

There is no B model (yet). rpi4b has the b attached since it is FK__MACHINE_MODEL="Raspberry Pi 4 Model B" View the full article