SBC News

Description Fixes meson64 current & edge kernels. Add patch https://patchwork.kernel.org/project/linux-amlogic/patch/d9721029-780e-09f1-0207-72d3897032a4@gmail.com/ The usage of edge-triggered interrupts lead to lost interrupts under load, see [0]. This was confirmed to be fixed by using level-triggered interrupts. The report was about SDIO. However, as the host controller is the same for SD and MMC, apply the change to all mmc controller instances. [0] https://www.spinics.net/lists/linux-mmc/msg73991.html Fixes: 1499218c80c9 ("arm64: dts: move common G12A & G12B modes to meson-g12-common.dtsi") Reported-by: Peter Suti <peter.suti@streamunlimited.com> Te…

Description As per subject, BPF filters have been requested by some forum users for docker usage, so here they are. How Has This Been Tested? [x] Compiled successfully rk322x-current (5.15) deb packages Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description nanopi-r5s device tree now in 6.5 and uboot RC. borrowing odroid-m1 family for now. verified working. NVME needs attention. View the full article

Released earlier this week, Linux kernel 6.4 brings new features such as support for Intel LAM (Linear Address Masking), user events for tracing, and the ability for the machine keyrings used for Machine Owner Keys to store only CA-enforced keys. View the full article

Description Update ddr and bl31 blobs for opi5 and nanopi r6s Jira reference number [AR-9999] How Has This Been Tested? [x] Built and booted R6S fine [x] Orange Pi 5 was already working fine with https://github.com/armbian/build/commit/084fba8524937298a05fea55076ced540924cd22 Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

In another case of “Arm or RISC-V? Why not both“, ARIES Embedded has introduced “MSRZG2UL” and “MSRZFive” OSM compliant system-in-packages (SIPs) based on respectively Renesas RZ/G2UL Arm Cortex-A55/Cortex-M33 and RZ/Five AX45MP RISC-V microprocessors and designed for industrial controllers, IoT devices, and embedded systems with a basic GUI. Both solder-on modules come in the OSM Size S form factor (30x30mm), 512MB to 4GB of DDR4 RAM, a 4GB eMMC NAND flash, various interfaces including Gigabit Ethernet and CAN-FD, and are available in either commercial (-0°C to +70°C) or industrial (-40°C to +85°C) temperature ranges. “MSRZG2UL” and “MSRZFive” specifications: SoC MSRZG2U…

prepare-host: trixie and sid don't carry python3-distutils anymore prepare-host: trixie and sid don't carry python3-distutils anymore View the full article

Description Future Ubuntu development release, CSC. How Has This Been Tested? Builds, but we need to enable repository. Checklist: [x] My changes generate no new warnings View the full article

Description sun55iw3-syterkit: update kernel config How Has This Been Tested? [x] Successfully built. [x] System startup. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description As reported here, the cryptroot functionality was broken on boards that were using flash-kernel. Also because the dropbear config directory and filename is changed in newer dropbear versions, the ssh unlock functionality was broken on bullseye+. This PR fixes the same Jira reference number AR-1799 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Tested by creating image for RPI4B with cryptroot and ssh unlock enabled. Unlocked cryptroot using ssh key Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-…

No descriptionView the full article

While our regular column (this time on Video4Linux, written by Ezequiel Garcia) is alive and well in this month's issue of LXF, there's also something else worth highlighting: a 6-page interview with none other than Collabora's Graphics lead, Daniel Stone! View the full article

After cleaning up and expanding Whisper-Hindi to 3,000 hours, we now have explicit timestamp prediction, faster I/O, and fine-tuned models across all sizes, bringing us even closer to fully reliable, production-ready Hindi ASR. View the full article

paperd.ink Merlot is a tricolor E-paper display with an open-source hardware control board based on ESP32 wireless SoC that is programmable with Arduino, MicroPython, or the ESP-IDF framework. We first wrote about the paperd.ink 4.2-inch ESP32-based monochrome e-Paper display last year, but the company has now refined its design with the “paperd.ink Classic” replacing the 3D printed enclosure with a vacuum cast enclosure and adding a 1,900 mAh battery. They also launched a new model, the Merlot, based on the same design but with a display supporting three colors: black, white, and red. Merlot specifications: Wireless module – ESP32-WROOM-32 module with ESP32 dual-core pro…

Description This PR creates a patch directory named v2022.04 and places u-boot patches for rockchip 32 bit (Tinkerboard/S) and rk322x into to leverage the new per-version patch format. Jira reference number AR-1637 How Has This Been Tested? [x] Built a fresh image and tested on rk322x device sdcard [x] Built a fresh image and tested on Asus Tinkerboard sdcard Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes…

distro-specific: systemd-resolved: don't impose 1.0.0.1 DNS server on users distro-specific: systemd-resolved: don't impose 1.0.0.1 DNS server on users See https://github.com/armbian/build/pull/6756/files#r1731373505 Fixes: b6f018a2b1d345729571b75b580e287f06d24f8f View the full article

Description enable CONFIG_RTW89_8852BE=m to take advantage of https://github.com/armbian/linux-rockchip/pull/192 GitHub issue reference: https://github.com/armbian/linux-rockchip/pull/192 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] built kernel&image for opi5plus - 8852BE chipset and bluetooth are recognized and working OOB Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] My changes generate no new warnings View the full article

This ensures that the armbian-audio-config script actually works in minimal builds too. This fixes #5012 (AR-1644) How Has This Been Tested? ./compile.sh BOARD=orangepipc BRANCH=current RELEASE=jammy BUILD_MINIMAL=yes BUILD_DESKTOP=no KERNEL_CONFIGURE=prebuilt booting it Installing mpg321 Trying to play some audio file on the minijack output: mpg321 -a hw:0 sample-15s.mp3, which produces audible sound Using alsamixer to see that the "Line out" control of card 0 is indeed successfully unmuted and set to 45% (0dB), presumably by armbian-audio-config Checklist: [ ] My code follows the style guidelines of this project N/A [ ] I have performed a self-review of my own code…

rockchip64_common: refactor: extract BOOT_SPI_RKSPI_LOADER=yes into rock-3a, rock-5b, and orangepi5 no more such rockchip-rk3588 references in common code View the full article

Greetings Armbian Community, We’re thrilled to share our latest strides in enhancing partnerships, expanding support, and advancing innovations within the Armbian ecosystem. Here’s a roundup of recent developments: 1. Strengthening Partnerships in Shenzhen: We’ve embarked on a mission to fortify our collaborations with partners in Shenzhen, aimed at fostering better support for our community. During our visit, we engaged with both existing and potential partners to deepen our ties and enhance the services we offer to you. Read more 2. Platinum Support and Giveaway for Bananapi M7: We’re excited to announce the launch of platinum support and a special giveaway for the l…

Description Since systemd journal can have its persistent files in /var/log/journal and may be softlinked to /var/log/journal, it needs to be safely recreated during the installation process. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] installed fix on up-to-date neo2 apt update && apt upgrade on nanopi neo2, copied updated nand-sata-install and exclude.txt, run nand-sata-install to install image to nand, restarted from NAND verified that /var/log.hdd/journal is a folder for persistent journald logging verified that /var/log/journal is symlink to…

Description The dts for vendor kernel has been merged . Add vendor branch support for Cool Pi Genbook And use mainline u-boot for vendor branch。 How Has This Been Tested? Compiled with command： ./compile.sh build BOARD=coolpi-genbook BRANCH=vendor BUILD_DESKTOP=yes BUILD_MINIMAL=no DESKTOP_APPGROUPS_SELECTED='browsers chat desktop_tools editors email internet multimedia office programming remote_desktop' DESKTOP_ENVIRONMENT=gnome DESKTOP_ENVIRONMENT_CONFIG_NAME=config_base DOWNLOAD_MIRROR=bfsu EXPERT=yes EXTRAWIFI=no KERNEL_CONFIGURE=no RELEASE=noble flash the img to sdcard， insert the sdcard to a usb disk， insert usb disk to genbook，the Armbian system can boot from usb…

Having multiple developers work on pre-merge testing distributes the process and ensures that every contribution is rigorously tested before merging. View the full article

Backport DTS/DTSI changes from linux-6.4.y to 6.1.y Add meson64-reboot driver to all boards Add board: ODROID N2L Add uart_A uart_AO_B uart_B uart_C where appropriate U-Boot v2023.07.02: ODROID N2/N2L/N2Plus/C4 Meson64-reboot driver: (source: tobetter) While the current meson64-reboot driver is cleaner and doesn't depend on modding other kernel sources, its functionality leaves much to be desired. One example can be found in the ODROID C4. Using the current driver, the board will not properly power off, leaving the POWER LED still on. The new driver powers off the unit completely. Fan control: (ODROID N2L/N2PLus) Added service and script for controlling the trip point. …

Description Helping @SeeleVolleri from: https://github.com/armbian/build/pull/6849 The default 2017.09 u-boot for rk3588 doesn't seem to work on this board with the generic config. Try mainline u-boot. Reference: https://github.com/armbian/build/pull/6834#issuecomment-2198765229 @SeeleVolleri Please test if this works :) You can edit this message to add your tests as well. How Has This Been Tested? [ ] Test A Checklist: Please delete options that are not relevant. [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] My changes generate n…

Description This PR refreshes OPP patches from kernel mailing list and adds automatic fan control support to Khadas Edge 2. Jira reference number [AR-9999] How Has This Been Tested? [x] Fan trip points have been tested. Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description I'm working on integrating the Youyeetoo R1 V3 board into the Armbian ecosystem by writing DTS files and testing system functionality. Here is the hardware that this board supports: Feature Description Model Youyeetoo R1 V3 CPU RK3588S Memory LPDDR4 (up to 32GB) USB 1x USB 3.0, 3x USB 2.0 Ethernet 1x GbE I/O GPIO, UART, NVME PCIe 2.0, eMMC, SD Card, M.2 (WiFi) When the compatibility is fully established, I plan to move it from WIP to CSC. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] All images are downloaded https://share.s…

Description Building for mangopi mq crashes with the following error: Image 'itb' is missing external blobs and is non-functional: opensbi /binman/itb/fit/images/opensbi/opensbi (fw_dynamic.bin): See the documentation for your board. The OpenSBI git repo is at https://github.com/riscv/opensbi.git You may need to build fw_dynamic.bin first and re-build u-boot with OPENSBI=/path/to/fw_dynamic.bin Some images are invalid make: *** [Makefile:1124: .binman_stamp] Error 103 --> (179) ERROR: Error 2 occurred in main shell [ at /armbian/lib/functions/logging/runners.sh:211 run_host_command_logged_raw() --> lib/functions/lo…

Advantech has announced the AIMB-522 industrial Micro-ATX motherboard with AMD Ryzen Embedded 5000 Series Zen3 processors for AI image processing in automation and surveillance applications. I had never heard about “Ryzen Embedded 5000 Series” processors, but that motherboard comes with a choice of new SKUs such as the 12-core Ryzen 5950E, the 10-core Ryzen 5900E, the 8-core Ryzen 5800E, and the 6-core Ryzen 5600E, as well as existing Ryzen 5000 desktop processors. AIMB-522 Micro-ATX motherboard specifications: Processor (one or the other) Ryzen 5950E 12-core processor @ up to 3.4 GHz with 64MB L3 cache; TDP: 105W Ryzen 5900E 10-core processor @ up to 3.7 GHz with 64MB L3…

Description Currently, if losetup -f has to create a new device node and is run in a docker container, the device will be created on host butt will not be available to the already running container. This PR mitigates that by running losetup -f in a container in case there are no loop devices (/dev/loop0 is checked). The container exits after executing losetup and the main build container is run after. The MKNOD capability does not affect the issue, so it was removed. For additional context, previous attempts at fixing: #6576 #6642 #6927 #6936 GitHub issue reference: #6568 Jira reference number AR-2132 How Has This Been Tested? Fresh boot on a system that doesn't have…

Vecow ECX-3200 is an expandable, fanless embedded system powered by Intel 13th generation Core i9/i7/i5/i3 Raptor Lake-S processor or 12th generation Alder Lake-S processor designed for rugged Machine Vision, AMR, Rolling Stock, Smart Retail and Edge AI applications. The ECX-3200 supports up to 64GB DDR5, SATA & NVMe storage, offers four 2.5GbE RJ45 or M12 ports with PoE+ on the rear panel, plus one additional Gigabit Ethernet port and a 2.5GbE port on the front panel, four video outputs up to 8Kp60 resolution, several USB 3.2 ports up to 20 Gbps, some serial ports, as well as isolated I/Os. Vecow ECX-3200 specifications: SoC Up to 24-core 13th Gen Intel Core i9/i7/i5…

Description Add a patch series to support VEPU121/VPU121, which mainly enables hardware decoding for H.264. It can also decode MPEG2 and VP8 as well as do JPEG encoding. Usually I am against bloating the kernel with patches since it makes it more difficult to maintain. But having access to the RK3588's H.264 decoder is really useful for day to day tasks. How Has This Been Tested? [ ] Needs some testing View the full article

Description Trunk to next release version. View the full article

Description In #3814 I disable rtl8812au since build failed in kernel 5.18. Now upstream has fixed this issue aircrack-ng/rtl8812au#964, so I add it back. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Build kernel successfully Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and…

Description mipi_dsi_driver adjust function remove return void on linux6.1 (this patch also add new: orientation custom, reset level custom) nanopct4 rt5651 sound repeat pinctrl cause problem [ 7.395164] rockchip-pinctrl pinctrl: pin gpio4-0 already requested by ff880000.i2s; cannot claim for 1-001a [ 7.395192] rockchip-pinctrl pinctrl: could not request pin 128 (gpio4-0) from group i2s-8ch-mclk on device rockchip-pinctrl How Has This Been Tested? [x] product panel_simple_dsi.ko on linux6.1 [x] nanopct4 rt5651 sound normal on linux6.1 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code […

Fixing numix and dconf settings for mate desktop defaults View the full article

Syncbotic Syncbot is a four-wheel autonomous mobile robot (AMR) platform for research and education that can be fitted with an NVIDIA Xavier NX or an Intel Apollo Lake/Tiger Lake-based controller running Ubuntu 20.04 operating system with ROS 2 framework, and comes with an motion control MCU board with an EtherCat master and running Zephyr OS. The robot comes with four 400W TECO servo motors, can handle up to 80kg payloads for sensors and a robotic arm, features 12V and 24V power output for sensors, four USB 3.0 ports, and can also be equipped with an eight-camera kit with Intel RealSense and ToF cameras. Syncbot AMR specifications: Robot Controller Platform (one or the o…

Alder Lake processors were first formally announced at the end of 2021 with the most powerful H-Series, followed by a range of Alder Lake Edge IoT processors, and in February, Intel officially launched Alder Lake P-Series and U-Series mobile hybrid processors which I had expected to find in several mini PCs by now. But apart from ASRock iBOX 1200 Series announcement, and leaks of the NUC 12 Studio Pro, I had not really seen any. But today, I found what looks like a mini PC with the Polywell Nano-U12P, but it’s instead marketed as an 8K digital signage player with a choice of Alder Lake P-series and U-series processors. Nano-U12P specifications: SoC (one of the other) Inte…

Description Hotfix to remove a hunk from a patch that prevented compilation of uwe5622 driver on sunxi64 family for current kernel 5.15. The hunk was just "cosmetical" because it removed a compilation warning about unused variables. There seems to be some #define and #ifdef difference on sunxi64 that causes the compilation error. Also the application of bluetooth-fix patch has been removed from drivers_network.sh since the patch has been removed in the past. How Has This Been Tested? [x] Compiled current 5.15 kernel debs for OrangePi 3 LTS (sunxi64) [x] Compiled current 5.15 kernel debs for OrangePi 4 LTS (rockchip64) [x] Compiled edge 6.1 kernel debs for OrangePi4 LTS…

STMicro introduced the VL53L8 multi-zone direct Time-of-Flight (dToF) sensor last month, but here’s another ToF sensor with VL53L5CP specifically designed for the PC market with the enablement of features such as user detection, gesture recognition, and intruder alert. STMicro says the ranging sensor continuously scans its field of view to map the scene and gather intelligence without using a camera or recording images. With 64 (8×8) zones within a wide 61-degree field, the VL53L5CP can detect and track multiple targets, calculating at their X/Y/Z coordinates and motion at high speed. VL53L5CP features: 940 nm invisible Vertical Cavity Surface Emitting Laser (VCSEL) and i…

Bumps ossf/scorecard-action from 2.3.1 to 2.3.3. Release notes Sourced from ossf/scorecard-action's releases. v2.3.3 [!NOTE] There is no v2.3.2 release as a step was skipped in the release process. This was fixed and re-released under the v2.3.3 tag What's Changed :seedling: Bump github.com/ossf/scorecard/v4 (v4.13.1) to github.com/ossf/scorecard/v5 (v5.0.0-rc1) by @​spencerschrock in ossf/scorecard-action#1366 :seedling: Bump github.com/ossf/scorecard/v5 from v5.0.0-rc1 to v5.0.0-rc2 by @​spencerschrock in ossf/scorecard-action#1374 :seedling: Bump github.com/ossf/scorecard/v5 from v5.0.0-rc2 to v5.0.0-rc2.0.20240509182734-7ce860946928 by @​spencerschrock in oss…

The kernelci.org project aims at continuously testing the mainline Linux kernel, from stable branches to linux-next on a variety of platforms. When a revision fails to build or boot, kernel developers get informed via email reports. View the full article

This week in Armbian development saw significant progress across board support and kernel updates. New boards such as the Cainiao CNIOT Core, EByte ECB41-PGE, DG SVR 865 Tiny, and NORCO EMB-3531 received initial support, expanding hardware compatibility. Kernel patches were rewritten for the meson64 and rockchip64 platforms, aligning with version 6.18.18, while edge releases were bumped to 7.0-rc3 and rc4. Improvements included enhanced SD card and audio support for SpacemiT and Youyeetoo YY3588 boards, as well as refined configuration checks and display fixes. Several upstream patches were dropped or disabled, and the Dependabot schedule was updated for daily maintenance…

In PR6507 the use of cpufrequtils was removed and the functionality put into armbian-hardware-optimization This commit removes the remaining now unused installs of the deprecated cpufrequtils package Changes to be committed: modified: config/cli/bullseye/main/packages modified: config/cli/common/main/packages modified: config/cli/jammy/main/packages Description How Has This Been Tested? [x] jammy cli build Checklist: Please delete options that are not relevant. [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code View the full article

PIX NII pocket-sized mini PC features an Intel Pentium N6005 Gemini Jasper Lake processor that should provide a nice upgrade to existing 2.4-inch mini PCs based on Gemini Lake processors such as Larkbox. The tiny computer is slightly larger (2.7×2.6 inch) than the previous 2.4-inch models, but ships with up to 16GB RAM, up to a 1TB NVMe SSD, and offers two 4K-capable HDMI 2.0 ports, Gigabit Ethernet & WiFi 6 connectivity, as well as a few USB 3.2 ports, plus a 3.5mm audio jack. PIX NII specifications: SoC – Intel Pentium N6005 quad-core processor @ 2.0GHz / 3.3GHz (Turbo) with Intel UHD graphics; 10W TDP System Memory – 8GB or 16GB DDR4 RAM Storage SATA or NVMe SSD wi…

ARIES Embedded MSMP1 OSM-compatible system-in-package (SiP) based on STM32MP1 CortexA7/M4 microcontroller for Industrial and IoT applications follows the company’s MSRZG2UL and MSRZFive OSM-compatible SiPs with Renesas Arm or RISC-V microprocessor introduced a few months ago. But instead of coming in the ultra-compact 30×30 mm OSM Size S form factor, the new MSMP1 complies with the larger 45x30mm OSM Size L form factor with a total of 476 contacts to allow for more I/Os. The SiP also integrates 512 MB to 4 GB DDR3L RAM, and 4 to 64 GB eMMC flash. MSMP1 SIP specifications: SoC – STMicro STM32MP1 single or dual-core Arm Cortex-A7 processor up to 800MHz, with Arm Cortex-M4 r…

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [NaN] How Has This Been Tested? Built/Tested both H3 and H5 images Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description After they are breaking for (probably) whole Allwinner. For making a release this is anyway a proper direction. Will check later where exactly is breaking. Jira reference number AR-1192 How Has This Been Tested? [x] Build Nanopi Neo2 u-boot [x] Build Orangepi PC2 u-boot Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Introduce a driver that leverages the virtual poweroff feature of Trust OS for rk322x that allow Power On with IR remote controller KEY_POWER. It brings the board into suspended state (ie: "virtual poweroff") on shutdown and resumes power when the user pushes KEY_POWER of the remote controller. This is for current 6.1 and edge 6.5 kernels on rk322x family, but it could be possible to extend to other rockchip socs with minor changes. The driver may need some polishing here and there, but it already very usable. To be enabled, it requires the ir-wakeup overlay. How Has This Been Tested? [x] current kernel compiled and tested on live debian bookworm system [x…

Cytron’s Maker Pi Pico Mini is an add-on board for the Raspberry Pi Pico and the latest Raspberry Pi Pico W with a battery port, GPIO status LEDs, a WS2812B Neopixel RGB LED, passive piezo buzzer, user and reset button, as well as “Maker” ports for expansion. It comes with most of the features found in the company’s Maker Pi Pico board, but in a much more compact form factor, since the add-on board is only slightly larger than the Raspberry Pi Pico to allow for soldering using the castellated holes. Maker Pi Pico Mini specifications: Fitted with Raspberry Pi Pico / Pico W LEDs – 6x Status indicator LEDs for GPIOs, 1x RGB LED (WS2812B Neopixel) Audio – 1x Passive piezo buz…

odroidn2l: add board file for ODROID N2L; on meson64 edge; add N2L-specific FIP handling to g12b odroidn2l: add board file for ODROID N2L; on meson64 edge; add N2L-specific FIP handling to g12b current (6.1) does not yet carry the DTB u-boot (up to at least 2023.10-rc2) does NOT have ADC detection for N2L, so force the DTB meson-g12b.conf: add a specific if for odroidn2l before the odroidn2* for FIP blobs View the full article

Description Move LicheePi-4A to eos because its chip design has security vulnerabilities. Not only security vulnerabilities, but there are also still many issues with the support for RISC-V at the moment. Reference link： https://www.theregister.com/2024/08/07/riscv_business_thead_c910_vulnerable/?td=readmore https://ghostwriteattack.com/ View the full article

Dear Armbians, Armbian point releases are times when our entire team works diligently to stabilize our highly complex ecosystem. We understand that, despite our best efforts, there will always be some issues that may not work perfectly. We estimate that resolving bugs and adding new features for each release takes thousands of hours to be completed. This is what the Armbian and its community contributes on top of the vanilla Linux code, which is aggregated at common points, usually referred to as mainline. The code, contributed by many individuals, is intended to be stable. However, given the complexity of the Linux kernel and its maintenance by a diverse group of people…

Description I have a Firefly-itx-3588j board How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Build [x] neofetch Checklist: Please delete options that are not relevant. [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate lots new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description The idea is to introduce the possibility to cache downloads from GH runners to lower downstream bandwidth used and increase overall speed. Especially on machines with lots of runner this could save quite some bandwidth while sacrificing disk space. http caching has been tested and seem to work nicely. https caching is a lot more tricky and may be introduced later. This PR has two parts: set apt repository to http instead of https where possible. Packages are signed anyways. Pass various proxy environment variables to docker so it respects those. Doesn't make sense not to pass them since when using PREFER_DOCKER=no and any of these variables are set beforeh…

T8-Pro is a low-cost mini PC powered by an Intel Celeron N5095 Jasper Lake processor that offers features such as triple 4K HDMI output and dual Gigabit Ethernet usually found in more expensive models for the industrial/embedded market. The actively-cooled mini PC is equipped with 8GB RAM and an M.2 2242 SSD of 128GB to 1TB capacity. It also comes with a WiFi 5 and Bluetooth 4.2 module, three USB 3.0 ports, and a 3.5mm audio jack. T8-Pro mini PC specifications: SoC – Intel Celeron N5095 quad-core Jasper Lake processor @ 2.0GHz / 2.9GHz (Turbo) with 4MB cache, 16EU Intel UHD Graphics; 15W TDP System Memory – 8GB LPDDR4X (Up to 16GB, but not offered for sale) Storage – 128…

lib/tools/shellcheck.sh: add (very low-bar "error") checks to config/sources and config/boards while keeping lib/ code in custom "critical" level To run (one day will be added to some pre-commit and PR checks) bash lib/tools/shellcheck.sh View the full article

ECS LIVA Q3H is a pocket-sized mini PC with a Jasper Lake mini PC and the company says it is especially suited to video conferencing applications thanks to HDMI output and input ports enabling users to connect it with a guest PC and easily add it to a meeting. The mini PC is equipped with an Intel Pentium Silver N6000, Celeron N5100, or Celeron N4500 processor, comes with up to 4GB RAM and 128GB storage, supports Ethernet and WiFi 5 networking and offers a few USB 3.2/2.0 ports for peripheral expansion. LIVA Q3H mini PC specifications: Jasper Lake SoC (one or the other) Intel Celeron N4500 dual-core processor @ 1.1GHz / 2.8GHz (Burst frequency) with Intel UHD graphics; 6W…

Bumps rich from 13.7.1 to 13.8.0. Release notes Sourced from rich's releases. The Thanks for your patience Release This is a fairly large update. Mostly an accumulation of small fixes and enhancements. Nothing qualifies as a *breaking change (for some definition), but there may be some subtly changes to output. Check below for anything that might affect you! [13.8.0] - 2024-08-26 Fixed Fixed Table rendering of box elements so "footer" elements truly appear at bottom of table, "mid" elements in main table body. Fixed styles in Panel when Text objects are used for title Textualize/rich#3401 Fix pretty repr for collections.deque Textualize/rich#2864 Thread used in prog…

armbian-desktop: remove "Conflicts: gdm3"; some sddm support rootfs-desktop: disable sddm as well as lightdm and gdm3 in desktop_postinstall() lightdm, gdm3 already had this armbian-firstlogin: shellfmt, no changes armbian-firstlogin: better dm detection + add simple no-op sddm support armbian-desktop: remove "Conflicts: gdm3" if you installed gdm3 (even if you don't use it), you lose Armbian wallpapers View the full article

Description Upstreaming patch: https://patchwork.kernel.org/project/linux-rockchip/patch/20240430024002.708227-3-liujianfeng1994@gmail.com/ The current fdb50400 won't work. there are errors in dmesg when doing decoding. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] ./compile.sh kernel BOARD=rock-5b BRANCH=edge DEB_COMPRESS=xz KERNEL_CONFIGURE=no KERNEL_GIT=shallow Checklist: Please delete options that are not relevant. [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, …

SB Components is running another crowdfunding campaign with the EnkPi ePaper display powered by a Raspberry Pi Pico W board and offered in four different sizes namely 2.9-inch, 4.2-inch 5.83-inch, and 7.5-inch. Each mainboard also comes with a USB Type-C port, a microSD card socket, an RTC with a backup battery holder, a buzzer, six user buttons, and a JST connector for expansion with GPIO, I2C, UART, and ADC signals. EnkPi specifications: MCU board – Raspberry Pi Pico W with Raspberry Pi RP2040 dual-core Cortex-M0+ microcontroller, 2MB QSPI flash, WiFi 4 module. Storage – MicroSD card socket Display connected over SPI to the Pico W board 2.9-inch tricolor ePaper display …

How Has This Been Tested? [x] Build test View the full article

This update ensures that ./userpatches/kernel/pre-config.sh runs before the kernel's make menuconfig command. Users can now place configuration instructions in this file instead of manually configuring the kernel. The pre-config.sh file may include instructions like: scripts/config --enable CONFIG_DEBUG_FS scripts/config --enable CONFIG_KGDB scripts/config --enable CONFIG_UBSAN The scripts/config utility is provided by the kernel to facilitate configuration changes through scripts. View the full article

Description This PR enabled USB port present on the expansion board for the OrangePi Zero 2 sbc. This change applies to the current current variant of the OS for this board (Kernel 6.1.y). (Similar PR for 6.2.y kernel here: #5344) How Has This Been Tested? Requirements: Any USB stick with basic file system present (eg. exFAT) and some files / folders on it Logged in as root or as a user with sudo priviledges [x] Test A: make sure the change does not break the board when used WITHOUT the expansion board Boot up the board Check whether the base USB port still works correctly lsusb shows the USB stick when plugged into the port mount /dev/sda1 /media/<mountp…

In part 1 and 2 of this series, we took a condensed in-depth look at the eBPF VM. In part 3, we define the high-level components of an eBPF program, including the backend, loader, frontend and data structures. View the full article

The 6.5 release is here and it comes with many changes. As is often the case, Collabora has been actively involved in the submission of patches, mostly in the task of hardware enablement for Mediatek and Rockchip SoCs. View the full article

It’s that time of year… CNX Software giveaway week! For the 9th edition, we’ll have seven items to give away, five that I will send myself, and two that will be sent directly from two companies that accepted to add their own products to the giveaway. We’ll start the giveaway with NanoPi R5S router based on Rockchip RK3568 SoC with 2 GB DDR4 RAM, 8GB eMMC flash plus an M.2 socket for NVMe SSD, two 2.5GbE Ethernet ports, one Gigabit Ethernet port, as well as HDMI 2.0 video output and two USB 3.0 ports. I reviewed the NanoPi R5S router with OpenWrt and Ubuntu 20.04 “FriendlyCore”, but I had to call this a “preview” since 2.5GbE was far from optimal, sometimes only a little…

Description Building a FIT image on espressobin by using the post-creation initramfs hooks, like the legacy image builder uses. Boot script has been modified to use the FIT image. Variable added to armbianEnv.txt to choose board version (current valid options "v5", "v7") How Has This Been Tested? Built and ran image, ran update-initramfs script. Have not tested upgrade - expected that the script to create the FIT image will install as part of the BSP, but the boot.cmd will NOT be updated and boot.scr.uimg will NOT be regenerated. These steps could be done manually. Since legacy image script remains, no breakage is expected. Checklist: [x] My code follows the style gu…

Sfera Labs has launched another Raspberry Pi RP2040-based hardware platform with the Iono RP D16 industrial IO module following the Exo Sense RP multi-sensor module we covered last month. The Iono RP D16 module provides sixteen digital 24V I/O lines, an RS-485 serial interface, a wide range 12-28V power supply input, and its DIN-rail case enables installation in electrical cabinets and automation control systems. Iono RP D16 specifications: MCU – Raspberry Pi RP2040 dual-core Arm Cortex-M0+ microcontroller @ 133MHz with 264kB on-chip SRAM Storage – 16MB SPI flash Inputs/Outputs via terminal blocks Up to 16x 24V 640mA outputs driven by high-side switches that can also be c…

This picks up from where we left off: https://github.com/armbian/build/pull/6771 Added Linux Legacy and Current. Legacy: 6.1.15 Current: 6.1.95 Wireless has been given its own function and patch directory. Bluetooth firmware added to armbian/firmware. esos.elf moved to: packages/blobs/riscv64/spacemit/ Host machine used for builds: Ubuntu Noble (aarch64) Images tested: Ubuntu Noble Minimal and Debian Sid Information: https://docs.banana-pi.org/en/BPI-F3/BananaPi_BPI-F3 https://gitee.com/bianbu-linux Flashing u-boot to eMMC: (This is not apart of the PR and needs to be added in the future.) echo 0 > /sys/block/mmcblk2boot0/force_ro sleep .50 dd if="bootinfo_emm…

Bumps github/codeql-action from 2 to 3. Release notes Sourced from github/codeql-action's releases. CodeQL Bundle v2.15.4 Bundles CodeQL CLI v2.15.4 (changelog, release) Includes the following CodeQL language packs from github/codeql@codeql-cli/v2.15.4: codeql/cpp-queries (changelog, source) codeql/cpp-all (changelog, source) codeql/csharp-queries (changelog, source) codeql/csharp-all (changelog, source) codeql/go-queries (changelog, source) codeql/go-all (changelog, source) codeql/java-queries (changelog, source) codeql/java-all (changelog, source) codeql/javascript-queries (changelog, source) codeql/javascript-all (changelog, source) codeql/python-queries (chan…

Pine64 Star64 is an upcoming single board computer (SBC) powered by StarFive JH7110 quad-core 64-bit RISC-V processor equipped with an Imagination BXE-2-32 GPU, and in a form factor similar to the earlier Pin64 model B boards such as the Quartz64 Model A. The Star64 SBC will be offered with either 4GB or 8GB of RAM, an HDMI 2.0 video output connector, two Gigabit Ethernet ports, a WiFi 6 and Bluetooth 5.2 module, USB 3.0 ports, a PCIe slot, and a GPIO header for expansion. Star64 preliminary specifications: SoC – StarFive JH7110 quad-core 64-bit RISC-V (SiFive U74 – RV64GC) processor @ up to 1.5 GHz with Imagination BXE-2-32 GPU supporting OpenGL ES 3.2, OpenCL 1.2, Vulka…

When we first covered the Framework modular laptop in 2021 it came with a choice of 11th generation Intel Tiger Lake Core processors, up to 64GB RAM, up to 4TB SSD storage, a 13.5-inch display, a Full HD webcam, and a 55Wh battery. Modular electronic devices have been worked on by several companies over the years, but such endeavors usually result in failure due to costs and other difficulties. Remember Google’s Project Ara? But Framework may have found something that works, as they’ve now launched 13th Generation Intel Raptor Lake motherboards, AMD Ryzen 7040-series motherboards, updated the 13.5-inch display with a Matte finish, and even unveiled the Framework Laptop 1…

Description This commit re-applies previously utilized 'HACK' patches aimed at addressing eMMC phase clock configuration issues exclusively on JetHub D1, D1+, and H1 devices. No impact on other devices. Jira reference number AR-2049 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] D1+/H1 boots correctly Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My cha…

This week's work centers on release and CI infrastructure, board and U-Boot updates, and build framework hardening. On the release pipeline, asset manifest JSON is now emitted alongside uploads, third-party armbian-images.json sources are merged into the main download index, and dispatch chains were rewired so that build completion fans out cleanly to download-index regeneration and website sync. Ubuntu resolute (26.04) entered the daily build matrix, with corresponding prepare-host adjustments for its qemu-user packaging and a targeted blacklist for boards failing resolute plus GNOME. The new Armbian SDK images are now surfaced on the website and ship preloaded with the …

Update Das U-Boot to v2023.07.02 Patch: HACK: mmc: meson-gx: limit to 24MHz https://github.com/radxa/u-boot/commit/db6738fed924d7febb8bac927e30526f81408eeb In my testing the patch is required for stable boot on REV 1.51. It is not required on REV 1.4, but has no ill effects on boot. Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Chipsee AIO-CM4-156 is an industrial All-in-One computer powered by a Raspberry Pi CM4 module and equipped with a 15.6-inch capacitive touchscreen display with 1920×1080 resolution. The new panel PC builds upon the earlier AIO-CM4-101 model with a 10.1-inch touchscreen display and besides the larger and higher resolution 15.6-inch Full HD display, it also adds support for an optional 250GB Sandisk NVMe SSD and a 2mm protective “armoplated” Glass. Since as far as I know, “armoplated” is not a word, they may refer to armored/toughened glass instead. AIO-CM4-156 specifications: SoM – Raspberry Pi CM4 with Broadcom BCM2711 quad-core Cortex-A72 processor at 1.5 GHz, up to 8GB …

Description This repository contains latest stable version of ZFS that is able to build with latest kernels. We used to sync files from here and distribute them from our repository. But since we are blocked by aptly incompatibility with zst compression, we need to upgrade repository management or do this. Jira reference number AR-1112 How Has This Been Tested? [x] Build ZFS on Odroid N2+ running EDGE 5.19.y kernel Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My ch…

The aic8800_dkms_file_name for sdio should be aic8800-sdio-dkms. I think this is a copy-paste error when this extension was added. View the full article

Description It wasn't possible to use overlays out-of-the-box because of they didn't have same prefix as Armbian's overlay prefix. Now they have valid names and it's possible to use them without extra effort. How Has This Been Tested? [x] Checked overlays on OPi5 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

ARES-500AI is another embedded box PC from AAEON, but instead of the usual Intel or NVIDIA Jetson accelerators, it integrates a Huawei Atlas 200 AI accelerator module based on the Ascent 310 chip delivering up to 22 TOPS of AI performance, and is designed for the Chinese market. The Linux computer supports up to 8GB RAM, SSD and MicroSD storage, and is equipped with four Gigabit Ethernet ports, some USB 3.0 ports, but somehow no video output port. Designed for industrial computer vision applications, the system supports a wide 9V to 36V power input, ARES-500AI Specifications: AI module – Huawei Atlas 200 based on Ascend 310 with 22/16/8 TOPS INT8, 11/8/4 TFLOPS FP1…

Description Update ATF from 2.5 to 2.6, and keep the bl31.elf name How Has This Been Tested? Booted this version ATF on Helios64, a rk3399 board. I have no other hardware to test other blobless configurations. [ ] Helios64 boot Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules U-Boot TPL 2021.07-armbian (May 24 2022 - 19:11:58) ... Trying to boot from BO…

Description Legacy - 5.15.123 -> 5.15.124 Current - 6.1.42 -> 6.1.43 Edge - 6.4.7 -> 6.4.8 Toggled CONFIG_RCU_TRACE in linux-sunxi-current.config to fix booting on 32-bit kernel How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Booted legacy, current and edge images on Orange Pi Prime (sun50i H5) [X] Booted legacy, current and edge images on NanoPi Duo2 (sun8i H3) Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas…

ARBOR ARES-1980 is a fanless rugged industrial controller powered by an Intel 11th Gen Tiger Lake Core processor with 9-36V wide power input, 2.5GbE, optional 4G/5G cellular and/or WiFi connectivity, and designed for factory automation. The embedded computer also comes with two PoE-capable Gigabit Ethernet ports, support for NVMe and SATA storage, eight digital outputs, eight digital inputs, several serial ports compatible with RS232, RS422, and/or RS485, and more. ARES-1980 specifications: SoC – Intel Core i3-1115G4E, Core i5-1145G7E (default), or Core i7-1185G7E Tiger Lake processor with Intel Iris Xe graphics System Memory – Up to 64GB 3200MHz RAM via 2x 260-pin DDR4 …

Description Back in the days we were using internal parallel executing. This feature is not maintained nor used anymore as we are using CI functionality for parallel execution. This commit removes last leftovers. Jira reference number AR-1073 How Has This Been Tested? Just files and one if sentence removal. No need. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream…

Submitted upon request to make user's life easier Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How to test $ git clone https://github.com/Kreyren/armbian-build-kreyren.git -b olimex-A20-OLinuXino-MICRO # Clone the source code with the specified branch # Change directory to the cloned repository $ ./compile.sh BOARD=olimex-a20-olinuxino-micro EXPERT=yes How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test conf…

This cycle is defined by three themes: broad new board enablement, a coordinated U-Boot v2026.10 refresh across Rockchip and Allwinner platforms, and substantial Rockchip kernel, media, and wireless work. Board support expanded on multiple SoC families, including the EasePi R1 and Pine64 Quartz64 Zero on RK3568, the ArmSoM CM7s IO board and Boardcon EM3588 on RK3588, Forlinx OK3572-C, and the Skysi X5 laptop. The Banana Pi BPI-M4 (RTD1395) and Cubieboard 4 returned with full enablement including A80 cpufreq, thermal, HDMI, and audio. Qualcomm support advanced with the Lenovo Legion Y700 Gen 4 on an SM8750 edge kernel bumped to 7.2.11, while the NVIDIA Jetson Nano joined t…

This week saw significant development activity across the Armbian ecosystem, with numerous enhancements to desktop environment support, including the addition of KDE Neon, KDE Plasma, MATE, and i3-wm, as well as improved branding and menu documentation. The desktop module was refactored for greater modularity and YAML-driven configuration, alongside fixes for theming and package removal tracking. Hardware support expanded with new device trees for NanoPC-T6 LTS Plus and Gateway DK, plus initial support for Arduino UNO Q (Qualcomm QRB2210) and additional USB Ethernet drivers. The build system received updates for kernel versions and distribution releases, notably bumping U…

Description All ethernet network names start with en, not just e. This is how predictible network interface names work in udev/systemd. :D Commit a57f4e2cf00da902610a6640507797e6eff071e5 already prevents managing other interfaces, for example docker and vpn interfaces (which should not be managed by netplan), but this makes it even less likely to match a wrong interface name. Documentation summary for feature / change I'm guessing the documentation will be automatically generated into here: https://docs.armbian.com/User-Guide_Networking/#default-armbian-configuration ? Please correct me if something needs to be done. How Has This Been Tested? Edited and applied the co…

Think Silicon NEOX GPU family with models optimized for graphics (NEOX|G) or artificial intelligence (NEOX|A) is based on the RISC-V RV64C ISA instruction set with adaptive NoC, and offers up to 64 cores delivering up to 409.6 GFLOPS at 800MHz with support for FP16, FP32 and optionally FP64 and SIMD instructions. The NEOX GPUs can be integrated into microcontrollers, crossover processors, and even more powerful application processors, and target AI, IoT/Edge, and media processing in consumer and industrial devices. Each shader of the GPU is a programmable 64-bit RISC-V (RV64GC) core running a real-time operating system (RTOS) and the GPU is supported by lightweight graphi…

Description This speed up the process of rebuilding repository as we eos repositories are served as empty. Closing https://github.com/armbian/build/issues/6561 How Has This Been Tested? [x] Manual repository generation Cleanup: dropping unsupported Removing output/repository/public/dists/buster... Removing output/repository/public/pool/buster-desktop... Removing output/repository/public/pool/buster-utils... Cleaning up prefix "." components main... Published repository has been removed successfully. Removing output/repository/public/dists/focal... Removing output/repository/public/pool/focal-desktop... Removing output/repository/public/pool/focal-utils... Cleaning up…

Firefly AIO-3588SG is a compact, low-profile SBC with Gigabit Ethernet, WiFi 6, and an 8K capable USB-C port with DisplayPort that is based on the company’s Core-3588SG module powered by a Rockchip RK3588S octa-core Cortex-75/A55 processor with up to 32GB RAM and 256GB eMMC flash. Apart from the Ethernet connector, which I assume could be removed upon request, the board appears to be designed to be as thin as possible which should make it suitable for projects and products that require high performance in a thin form factor such as robotics, digital signage, virtual reality headsets, etc… Firefly AIO-3588SG specifications: System-on-module – Firefly Core-3588SG with SoC –…

Description As per subject, move rockchip current to 6.6 and edge to 6.7. Some rework has to be done, in particular a LE patch has been fully merged (linux-0020) and can be remove and rockchip DFI driver has been heavily modified, so requires some patient work to be reinstated. Jira reference number AR-2016 How Has This Been Tested? [x] Compile rockchip 6.6 kernel [ ] Compile rockchip 6.7 kernel Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no n…

Description Bump sunxi to align with upstream versions. View the full article

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number AR-2050 How Has This Been Tested? Boots current and edge kernel from SDcard images Built-in WiFi works in both cases However, board will not allow clocking >1.0Ghz Built-in WiFi antenna is very weak Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ x ] Generate current image [ x ] Generate edge image Checklist: [x] My code follows the style guidelines of this project [x] I hav…

Latest Weston features View the full article

Description Add support for "i.MX8M Plus" boards from TQ-System. Use atf and uboot from https://github.com/tq-systems Add BSP packages for the tqma8mpxl family Add kernel patches (6.1 and 6.6) for the tqma8mpxl family Supported mainline kernels: current = 6.1.71 and edge=6.6.10 Supported boards: mba8mp-ras314 mba8mpxl How Has This Been Tested? [x] Build images for mba8mp-ras314 and mba8mpxl with current and edge kernel [x] Boot test "bookworm_current" and "bookworm_edge" mba8mp-ras314 [x] Boot test "jammy_current" and "bookworm_edge" mba8mpxl [x] HDMI, WLAN, USB test's mba8mp-ras314" bookworm_edge" with xfce image [x] HDMI, WLAN, USB test's mba8mpxl" bookworm_edge"…

Arducam OCam, whose name stands for Object Camera, is an AI camera with 3 TOPS of AI performance and designed to work with OStream‘s PhysicO Edge AI media platform that adds context to MP4 video streams in real-time. The camera supports resolutions from QVGA to 2K, takes USB or PoE power, comes with a drag-and-drop AI pipeline for easy programming/configuration, and is also compatible with common AI tools such as TensorFlow, PyTorch, Edge Impulse, and others. Arducam OCam specifications: Resolution – QVGA up to 2K Frame Rate – Up to 60 fps FoV – 80° Audio – Dual beamforming AI processing power – Up to 3 TOPS Power Supply 5V via USB PoE Power Consumption – Up to 5 Watts Di…

AAEON BOXER-8256AI is a fanless embedded box PC equipped with an NVIDIA Jetson Xavier NX system-on-module, offering four HDMI input ports – two Full HD, two 4K capable -, as well as two HDMI outputs for smart healthcare equipment, digital signage, and entertainment. The embedded computer comes with 8GB RAM and a 16GB flash provided by the NVIDIA module, supports M.2 NVMe and SATA storage, Gigabit Ethernet, plus optional WiFI, 4G, and 5G cellular connectivity through M.2 sockets. BOXER-8256AI specifications: SoM – NVIDIA Jetson Xavier NX with CPU – 6-core NVIDIA Carmel Armv8.2 64-bit CPU GPU – 384-core NVIDIA Volta GPU with 48 Tensor Cores AI accelerator – 2x NVDLA deep …