SBC News

Description In #3814 I disable rtl8812au since build failed in kernel 5.18. Now upstream has fixed this issue aircrack-ng/rtl8812au#964, so I add it back. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Build kernel successfully Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and…

This week marks two years since the OpenGL implementation on Vulkan was initially announced. Since then, and especially over the past few months, much has progressed with many new features being added and performance now close to native (95%!). View the full article

Starting today, and for the next few days, Collaborans will be taking part in this year's Embedded Linux Conference North America, the "premier vendor-neutral technical conference for companies and developers using Linux in embedded products". View the full article

Intel Meteor Lake processor family is supposed to succeed the 13th generation Raptor Lake chips itself coming after the current 12th generation Alder lake processors. It is scheduled to launch next year (2023), but we already have some details about the Meteor Lake U, P, and H mobile processors from a leak. Just like most Alder Lake processors, Meteor Lake will be hybrid processors with power and energy-efficient cores, but they’ll also feature new LP E-cores which should stand for “low power efficiency” cores in order to further lower the power consumption while a laptop or mini PC in standby mode. Meteor Lake mobile processors highlights: CPU P cores + E cores + LP-E co…

Espressif ESP-WIFI-CSI software relies on the disturbance in the force WiFi signals between one or more ESP32 boards and a router to detect whether humans are present in a room, or even indoor positioning, providing a cost-effective solution since no sensors are needed. Channel state information (CSI) leverages carrier signal strength, amplitude, phase, and signal delay indicators to reveal the signal scattering, reflection, and power attenuation phenomena that occur with the carrier as the transmission distance changes. This is typically used to measure the channel status of the wireless network in Wi-Fi communication, but it’s also possible to analyze and study the chan…

Inovato Quadra is an Arm Linux mini PC based on Allwinner H6 quad-core Cortex-A53 processor with 2GB RAM, 16GB flash, and running Armbian-built Debian 11 Bullseye 64-bit. If the device looks like a repurposed Android TV box, it is because it is based on the T95 Mini model with one HDMI 2.0 port, USB 3.0 and 2.0 ports, a microSD card slot, a Fast Ethernet port and WiFi 4 wireless connectivity. Inovato Quadra specifications: SoC – Allwinner H6 quad-core Arm Cortex-A53 processor @ up to 1.7 GHz with Arm Mali-720 MP2 GPU System Memory – 2GB RAM Storage – 16GB eMMC flash, MicroSD card slot Video & Audio Output HDMI 2.0 port up to 4Kp60 3.5mm AV port with video composite an…

We’ve had a sample of the Khadas Edge2 single board computer powered by Rockchip RK3588S octa-core Cortex-A76/A55 processor for a couple of weeks, and now that the board is officially launched we can post our review of the board with Ubuntu 22.04, and we’ll check out Android 12 later on. Khadas Edge2 Pro accessories The Khadas Edge2 comes in two variants: Basic and Pro, We received the Edge2 Pro SBC with 16GB RAM and 64GB flash that ships with two WiFi antennas by default, but the company also sent a low-profile fansink and thermal pad for cooling that in theory would be optional, but in practice, it is required as while the board runs fairly cool considering the performa…

Description Jira reference number AR-1418 View the full article

Contributing to the Vulkan Working Group since 2015, Jason has continues to make a significant impact. His expertise and dilligence has helped to shape the group and we're proud to see his hard work see some well earned spotlight. View the full article

Description This PR includes a patch that fixes: HDMI sound. X11 cursor flickering (https://github.com/radxa/kernel/pull/50) Missing resolutions (https://github.com/orangepi-xunlong/linux-orangepi/commit/6947bce36393fc034389ab1eef6f18a5ea64f17d) HDMI-CEC feature (https://github.com/radxa/kernel/commit/d35989ed644b9d67de09849779e5147f4332df55) How Has This Been Tested? [x] I compiled kernel and tested sound, flickering. [x] Confirmed adding missing resolutions -> https://forum.armbian.com/topic/25600-wip-current-issues/#comment-156823 [x] HDMI-CEC is confirmed by @catalinii. Orange Pi has CEC but i'm not able to test it. Checklist: [x] My code follows the style gu…

Description Removing packages we might not need. Jira reference number AR-1516 How Has This Been Tested? [ ] Build all (supported) changed scenarios Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description irony of using bleeding edge uboot was to take advantage of the native rock 4SE support in uboot....which is broken. using generic rockpi-4i uboot defconfig for now.. which works.. leaving placeholder so that we can one day, embrace what is pure. View the full article

Description add dts for Mini M8s Pro tvbox (S912, 2G/16G), which is essentially same as Beelink GT1 Ultimate, but with QCA9377/LTM8830 Wifi/BT Also for some re-branded tvboxes based on same hardware, e.g. LobbyTV How Has This Been Tested? Tested on my box. Boots, wifi & bt works. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Update maintainers and board status synced status from the database rename to .csc where we don't have anyone If you want to become a board maintainer, adjust data here. Ref: Board Maintainers Procedures and Guidelines View the full article

Description thead: add current kernel support. How Has This Been Tested? [x] Successfully built. [x] System startup. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description This change includes kernel patches to provide the following overlays when using armbian-config on the Orange Pi Zero 2 and Orange Pi Zero 3 boards. I2C IR USB OTG SPI UART These boards share very similar SOCs (RH616 / RH618), and the existing configuration that was also shared with the bigtreetech board did not function correctly for the Orange Pi Zero 2/3 boards, so the Zero 2/3 board overlay configuration was split out into its own files, and the board configurations updated to reference the new overlays. Note: The patches for these overlays have been added to the 6.1, 6.6 (current), and 6.7 (edge) patch directories but it appears the 6.1 code may not b…

Armbian's next release boots the FriendlyElec NanoPi M5 end-to-end from UFS on a mainline U-Boot, with no proprietary recovery image in the loop. It is the first RK3576 board in the catalogue to reach this state, and the integration pattern paves the way for the others. UFS, the storage class that replaced eMMC in phones, is packet-based and full-duplex with command queuing. The practical gain over an SD card shows up in random I/O, in latency under concurrent load, and in write endurance that holds up over years of deployment. FriendlyElec ships UFS on the M5 because the RK3576 has a native UFS controller, a sensible choice for any board destined for kiosks, robots, or i…

We’ve seen several hardware devices based on Rockchip RK3566 AIoT SoC that do not make use of the key features of the processor. But QNAP TS-133 1-bay NAS is different, since it relies on the native SATA and Gigabit Ethernet interfaces for network storage, and the built-in NPU is leveraged to accelerate object and face recognition by up to 6 times. The NAS comes with 2GB of RAM, 4GB of storage for QTS 5.0 Linux operating system, USB 3.0 and USB 2.0 ports, and the company promotes it as a “personal private cloud & home multimedia center”. QNAP TS-133 specifications: SoC – Rockchip RK3566 quad-core Cortex-A55 processor @ 1.8 GHz with Arm Mali-G52 EE GPU, 0.8 TOPS NPU/AI…

Description This partially fixes #3762 as if DEB_COMPRESS=xz is used. Jira reference number AR-1194 How Has This Been Tested? [x] Installed created packages on an Odroid HC1 running Debian bullseye [x] Ran ./compile REPOSITORY_UPDATE="update" Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

SONOFF POW Elite is an ESP32-powered smart power meter switch that can handle up to 20A max load to monitor the power consumption of all appliances in a whole room. The data can be visualized in real-time on the built-in LCD or via the eWelink app, up to six-month of hourly power consumption history can be saved, and the system can also be integrated with third-party solutions such as a Home Assistant, IFTTT, and Alexa Energy dashboard. SONOFF POW Elite specifications: WiSoC – Espressif Systems ESP32 dual-core Xtenxa processor @ up to 240 MHz with 2.4 GHz WiFi 4 and Bluetooth 4.2 connectivity Wireless – 2.4GHz 802.11 b/g/n WiFi 4 (Bluetooth does not seem to be used) Power…

Since our previous update on Panfrost, the open source stack for Arm's Mali Midgard and Bifrost GPUs, we've focused on taking our driver from its reverse-engineered origins on Midgard to a mature stack. View the full article

Linux Kernel 4.10 is out, and this time Collabora contributed a total of 39 patches by 10 different developers. View the full article

Description Maintenance How Has This Been Tested? [ ] Build test on affected kernel config changes Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

JeVois-Pro tiny AI camera was introduced last year with an Amlogic A311D processor with a built-in 5 TOPS NPU, and support for an Intel Myriad X or Google Edge TPU M.2 card all that in a compact 50x50x45 mm box. The company has now managed to get hold of some M.2 A+E 2230 Hailo-8 modules delivering up to 26 TOPS of AI performance and is selling for JeVois-Pro ultra-compact deep learning camera with the Hailo-8 accelerator for $599 delivering up to 31 TOPS once we include the built-in 5 TOPS NPU. I won’t go through the full specifications again, but in a nutshell, that’s a camera designed for robotics projects, powered by an Amlogic A311D hexa-core Cortex-A73/A53 process…

Description remove Budgie and KDE desktops as they are not in a best condition remove Sid add minimal images where useful Jira reference number AR-1368 View the full article

Description Improvements. Jira reference number AR-1419 How Has This Been Tested? [x] Test install to x86 machine Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Most of Realtek drivers have a bug: P2P IE not passed to AP beacon. This causes problems, when P2P-GO looks like a regular AP. All P2P capable devices can't see my P2P-GO in the list. I found a driver where P2P-GO works fine (according to user reviews): https://github.com/aircrack-ng/rtl8812au And found these differences. After I backported these changes my P2P-GO works fine. Also this changes is totally safe, because affects only P2P-related code This patch contains my patches to the original driver repo: jwrdegoede/rtl8189ES_linux#87 jwrdegoede/rtl8189ES_linux#88 But the owner is too busy to review that :( How Has This Been Tested? Create /etc/wpa_su…

To follow the naming convention used in the docs View the full article

M5Stamp S3, aka M5Stamp ESP32S2 or Stamp S3, is a tiny ESP32-S3 WiFi & Bluetooth LE (BLE) IoT module with a USB Type-C port, over 20 I/Os available through 2.54mm and 1.27mm pitch headers and castellated holes, and a heat-resistant cover. Many of the “new” ESP32-S3 hardware platforms launches these days are often updates from an ESP32 design, and the M5Stack’s M5Stamp S3 is no exception building on the original M5Stamp Pico, and its ESP32-C3 variants, namely M5Stamp C3 and C3U. M5Stamp S3 specifications: WiSoC – Espressif Systems ESP32-S3FN8 dual-core 32-bit Xtensa LX7 microcontroller with AI vector instructions up to 240MHz, RISC-V ULP co-processor, 512KB SRAM, 2.4GH…

I was informed about the “CM4 IO Computer” based on the official Raspberry Pi Compute Module 4 IO board housing in a metal enclosure along with the Raspberry Pi CM4 module. I initially thought it was new, but it’s been out at least since 2021. Nevertheless, it turns out there are at least two of this type of metal enclosures for the CM4 IO board, and when buying full systems, they may provide a way to source Raspberry Pi CM4 system-on-modules since individual modules are so hard to purchase if you are not a company with some minimum monthly production volume. As a development platform, the Raspberry Pi Compute Module 4 IO board is not optimized for cost or size, but there…

Description https://github.com/armbian/build/pull/4917#issuecomment-1513450111 @prahal Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

thinkpad-x13s: firmware PR has landed, remove usage of rogue fw fork thinkpad-x13s: firmware PR has landed, remove usage of rogue fw fork View the full article

Description Ordered this WiFi key and it was not working out of the box. Adding pids (and also for Netgear variant) helps that it works OOB. Jira reference number AR-1803 How Has This Been Tested? [x] Build and booted USB wireless device (on Odroid N2 https://paste.armbian.com/onulekucil) Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description ... and leave the rest with lightdm. Its matching display manager with DE. Related: https://github.com/armbian/build/pull/5810 Jira reference number [AR-9999] How Has This Been Tested? [x] Ubuntu Jammy Gnome works. Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

MLBench enables developers and maintainers to effortlessly gauge how their frameworks perform compared to other implementations, prior code versions, or across different boards, with respect to both runtime performance and other metrics. View the full article

To ensure the Linux kernel is running smoothly, it requires maintenance from a variety of levels. Those working on the lower levels, or the plumber layers, of the kernel will have a chance to convene next week at the annual Linux Plumbers Conference. View the full article

Description Add missing kernel dependencies. How Has This Been Tested? [ ] Build test Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] Any dependent changes have been merged and published in downstream modules View the full article

In my initial commit I assumed CONFIG_USE_PREBOOT=y was enabled by default. I was wrong. As reported by MicroLinux (Salva) on DISCORD the unit was still having issues booting. I sent him a patch I use which enables preboot and he reported back that "It boots fine now". NOTES: The patch he tested also had boot logo support enabled. In my testing boot logo support is not required. If for some reason in the future there are still eMMC boot issues, than maybe adding a slight delay "sleep 2" to preboot would suffice. https://github.com/armbian/build/pull/5858 Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own c…

Last week I attended the GStreamer spring hackfest in Thessaloniki to work on the PipeWire GStreamer elements and connect with the community. View the full article

http://blog.armbian.com/content/images/2026/01/introducing-armbian-imager.pngWe all know that feeling. You have a new Single Board Computer (SBC) in your hands, ready to be transformed into a home server, a media center, or a testing lab. The excitement is high until you hit the first roadblock: installation. Which image is right for this exact model? Which kernel should I choose? Did I download the correct variant, or will I end up with a system that won't boot? For years, this process has been a "guessing game" involving web searches, manual downloads, and the constant fear of causing damage with the terminal. It is time to end this frustration.Today, we are proud to p…

Tektronix is better known for its high-end and pricey oscilloscopes, but has now introduced the 1 Series DPO, a line of low-cost digital phosphor oscilloscopes starting at just $450, with optional AI-assisted control through the new Tek Intelligence connector. These oscilloscopes are designed for electronics testing, embedded development, education, and everyday circuit debugging. The 1 Series DPOs feature up to four analog channels, 50 MHz to 200 MHz bandwidth, 12-bit vertical resolution, and up to 1.25 GS/s sampling rate. They also integrate a 7-inch touchscreen and 10 Mpoints of memory per channel, support I2C, SPI, and UART protocol decoding, and implement built-in wa…

After completing a DIY Raspberry Pi Zero 2 W handheld PC earlier this year, Penk Chen has designed another, rather odd but cool-looking, DIY computer. The “Mainboard Terminal” is a retro-style computer with a round display powered by the mainboard found in Framework modular laptop. The computer has been tested to work with Ubuntu 22.04 out of the box with just a few configuration tweaks for the display, but other operating systems should also work considering the mainboard is based on an Intel Core i5-1135G7, i7-1165G7, or i7-1185G7 Tiger Lake processor. There are four main off-the-shelf electronics components: Framework laptop mainboard ($399 and up) OLKB Preonic Keyboa…

Elephant Robotics MechArm Pi 270 is a six-axis robotic arm with a 270mm working radius, support for up to 250 grams payload, and that runs Debian/Ubuntu + ROS on a Raspberry Pi 4 single board computer. The robotic arm was introduced last year in two separate crowdfunding campaigns on Kickstarter and Indiegogo organized by MechArm, which has now joined Elephant Robotics, and now supports myStudio software to upgrade the software, provide video tutorials on how to use the robot, as well as maintenance and repair information. MechArm Pi 270 key features and specifications: Controller – Raspberry Pi 4 Model B SBC with quad-core Cortex-A72 processor, dual-band WiFi 5 & Blu…

Monado 0.4 OpenXR runtime introduces initial support for Android and passes all of the OpenXR conformance tests with both OpenGL and Vulkan on desktop with a simulated device. View the full article

How to set up a fully functional ChromiumOS development environment on actual Chromebook hardware. View the full article

Conclusive Engineering WHLE-LS1 is a networking SBC powered by a choice of NXP Layerscape LS1xx8A Cortex-A72 or Cortex-A53 communication processors with four Gigabit Ethernet ports, two SFP+ cages capable of up to 10Gbps data rates. The board also features one SO-DIMM socket for up to 32GB DDR4, up to 64GB eMMC flash, M.2 PCIe sockets for NVMe SSDs, USB 3.0 host and USB 2.0 device ports, an RTC with backup battery, as well as serial and JTAG debug interfaces. WHLE-LS1 specifications: SoC (one or the other) WHLE-LS1026A – NXP Layerscape LS1026A 2x Arm Cortex-A72 @ 1.8GHz with DPAA package processing engine WHLE-LS1046A – NXP Layerscape LS1046A 4x Arm Cortex-A72 @ 1.8GHz wi…

After SiFive and StarFive, here comes LeapFive RISC-V silicon vendor offering the NB2 quad-core 64-bit RISC-V application processor with GPU, NPU, and vision and audio DSPs capable of running Linux. LeapFive NB2 processor is equipped with MIPI DSI and LVDS display interface, dual GbE, USB 3.2/2.0 interfaces, and other peripheral interfaces that make it well-suited to a wide range of applications including Smart Home applications, robotics, industrial gateways, drones, building automation, smart cities, digital signage, medical equipment and more. LeapFive NB2 specifications: CPU – Quad-core 64-bit RISC-V processor @ 1.8 GHz delivering 2.5 DMIPS/MHz Cache – 32KB I-cache, 3…

Description Maint View the full article

Description Improving Allwinner u-boot patches maintainability. Jira reference number AR-1389 On halfway done: Before: https://github.com/armbian/build/tree/master/patch/u-boot/u-boot-sunxi After: https://github.com/armbian/build/tree/AR-1389/patch/u-boot/u-boot-sunxi @150balbes When this step is done, we can discuss other variants. I expect to need another 2-3h to get this done alongside with build testings. How Has This Been Tested? [ ] Build all u-boots for boards that has been altered Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-under…

Description Fix the selection order View the full article

Sparkfun has launched a Satellite Transceiver Kit based on the Swarm M138 satellite and GNSS modem that allows low-bitrate two-way connectivity for IoT projects anywhere on earth. Remote IoT applications have benefited from LPWAN standards such as LoRaWAN and NB-IoT, but in some extreme cases coverage may still be challenging, so satellite communication may be the only practical option. It used to be really expensive, but Swarm makes this more affordable, and companies like SigFox and Semtech also have (or had?) plans to use low-earth orbit satellites for their respective LPWAN technologies. Swarm M138 kit content and specifications: Swarm M138 mini PCIe satellite modem a…

Description All RTL drivers have interesting working mode: -DCONFIG_CONCURRENT_MODE With this mode we have two or three interfaces: wlan0, wlan1 and wlan2 This useful, when we need both STA and AP/P2P-GO on one wifi card. But wlan1 is not working in the 8189FS driver. We can create AP/P2P-GO on wlan1, and it is shown on any STA, but can't receive any RX packets. At the same time, wlan2 always works fine! That is mysterious! But after a few investigations, I found the reason: wlan0 and wlan1 have the same MAC! :) For example: wlan0 xx:xx:xx:xx:a5:8d wlan1 xx:xx:xx:xx:a5:8d wlan2 xx:xx:xx:xx:a1:8d Originally, MAC changes only for if2 and later interfaces. This looks lik…

Because people often do CTRL+C and CTRL+V without thinking View the full article

Firefly EC-A1684JD4 FD and EC-A1684XJD4 FD are nearly identical Edge AI embedded computers based on respectively SOPHON BM1684 and BM1684X Arm AI SoC delivering up to 32 TOPS of AI inference, and capable of decoding up to 32 H.265/H.264 Full HD videos simultaneously for video analytics applications. The BM1684(X) SoCs are equipped with eight Cortex-A53 cores clocked at 2.3 GHz to run Linux, and the systems come with up to 16GB RAM, 128GB flash, two Gigabit Ethernet ports to receive the video streams, one HDMI output up to 1080p30 for monitoring, as well as RS232 and RS485 DB9 connectors, and a few USB ports. Firefly EC-A1684JD4 FD and EC-A1684XJD4 FD specifications: SoC …

Description ghproxy url is something like https://ghproxy.com/https://gtihub.com/armbian/build, which contains https://gtihub.com. Without this patch git will fetch from https://ghproxy.com/https://ghproxy.com/https://gtihub.com/armbian/build. Just skip modifying the url when ghproxy is set. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Build with GITHUB_MIRROR=ghproxy. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas…

We’ve previously tested the SNZB-02 Zigbee temperature and humidity sensor with the SONOFF NSPanel Pro smart panel, but ITEAD has now launched the SONOFF SNZB-02D that integrated the same features plus a 2.5-inch display to visualize the data. They’ve sent us a SNZB-02 sample for review, so after listing the specifications we’ll test SONOFF’s latest Zigbee sensor with Home Assistant. SONOFF SNZB-02D specifications Display – 2.5-inch black&white display Connectivity – Zigbee 3.0 Sensors Temperature sensor with -9.9°C to 60°C range, ±0.2°C accuracy Humidity sensor with 5%—95%RH range, ±2%RH accuracy Battery – 3V CR2450 coin-cell battery good for about 2 years with a 5-s…

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no ne…

Adjusted patching in drivers/net/wireless/realtek/rtw88/usb.c to reflect update in Linux 6.3.13 (EOL) https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/diff/drivers/net/wireless/realtek/rtw88/usb.c?id=v6.3.13&id2=v6.3.12 [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description As reported here, the cryptroot functionality was broken on boards that were using flash-kernel. Also because the dropbear config directory and filename is changed in newer dropbear versions, the ssh unlock functionality was broken on bullseye+. This PR fixes the same Jira reference number AR-1799 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Tested by creating image for RPI4B with cryptroot and ssh unlock enabled. Unlocked cryptroot using ssh key Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-…

odroidn2l: bump to u-boot v2023.10; boot-usb-first patch now only in board folder odroidn2l: bump to u-boot v2023.10; boot-usb-first patch now only in board folder with this, there are no more boards with v2023.07 View the full article

Description cpufrequtils is due to removal. Its not present in trixie anymore ... How Has This Been Tested? [x] Build armhf image / rootfs Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description merge and remove special kernel config drop rk3568-odroid kernel family port DT from mainline 6.6 to rockchip64-current with a single patch No other changes, board is staging, probably will go to community maintained, should be safe to merge. Jira reference number AR-1737 How Has This Been Tested? [x] build and boot current 6.1 image [x] build and boot current 6.6 image Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description I guess all these BOOTFS_TYPE come from https://github.com/armbian/build/pull/3874. Rock3a and other rk356x boards uses an old version of vendor u-boot: https://github.com/radxa/u-boot/tree/stable-4.19-rock3, which has bad support for ext4 filesystem. While rk3588 uses new version of vendor u-boot which doesn't have ext4 partition issue, so I just drop all this config from rk3588 boards. Command to query boards with this config: grep -rn rockchip-rk3588 config/boards/|awk -F ':' '{print $1}'|xargs grep BOOTFS_TYPE Here are the vendor uboot source of these boards: board vendor uboot source armsom-sige7 armsom-w3 nanopc-cm3588-nas nanopct6 nanopi-r6s r…

Description Found lost patch for JetHub D2 devicetree file. Jira reference number AR-2028 View the full article

This week's work centers on board portfolio expansion, kernel and U-Boot version bumps, and CI and infrastructure hardening across the build and documentation pipelines. Board support saw notable growth with the introduction of the SpacemiT K3 Pico-ITX and Luckfox Nova (RK3308B), alongside a new generic uefi-arm64-dt family and board intended to standardize UEFI device-tree targets. Qualcomm enablement advanced through Radxa Dragon Q6A and Q8B work, including UFS provisioning for Kodiak, EDL-based UFS flashing in the imager, and audioreach topology firmware for sc8280xp. Catalog assets were extended for the MaaXBoard 8ULP, Mellow Fly C5, Xiaomi Sheng, and the new Radxa an…

When you download an Armbian image, flash it to your SD card or SSD, and boot your board, a huge amount of automation has already happened behind the scenes. That invisible engine is what you can see at https://actions.armbian.com. Think of it as the mission control center of Armbian’s infrastructure. It doesn’t look flashy, but it represents one of the most important parts of the project: the system that builds, tests, validates, and maintains Armbian for hundreds of boards, kernels, and configurations. Armbian isn’t just an operating system. It’s an automated production platform for embedded Linux.What is actions.armbian.com?actions.armbian.com is Armbian’s public autom…

The 4-day event is dedicated to everything open source and will showcase a program of 250+ talks. Collaborans will once again be actively participating in the week's activities, with no less than eight presentations, a BoF on KernelCI, and two panel discussions! View the full article

Over the past few weeks, I have been working for Collabora on plumbing DRM format modifier support across a number of components in the graphics stack. This post documents the work and the related consequences/implications. View the full article

E.E.P.D. EM PRO mini “eNUC-BoxPC” is a mini PC powered by a 6-watt AMD Ryzen Embedded R1102G dual-core processor and designed for a variety of applications such as thin client, network monitoring, production data acquisition, digital signage, point-of-sale, building management systems, and so on. The embedded fanless mini PC ships with up to 16 GB DDR4 RAM, supports M.2 SATA or NVMe storage, and offers two mini DisplayPort video outputs, three USB 3.1 ports, and two Gigabit Ethernet ports, as well as serial ports. The mini PC offers 8V to 32V input voltage suitable for automotive applications and can operate in the 0°C to 50°C temperature range, although a wider range c…

Description Since we are making a list of all boards, some stands out for wrong naming. Cosmetic adjustment. How Has This Been Tested? No need. Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

As expected, StarFive has officially unveiled the JH7110 quad-core RISC-V processor with 3D GPU and the VisionFive 2 SBC. I just did not expect the company to also launch a Kickstarter campaign for the board, and the version with 2GB RAM can be had for just about $46 for “early birds”. The VisionFive 2 ships with up to 8GB RAM, HDMI 2.0 and MIPI DSI display interfaces, dual Gigabit Ethernet, four USB 3.0/2.0 ports, a QSPI flash for the bootloader, as well as support for eMMC flash module, M.2 NVMe SSD, and microSD card storage. VisionFive 2 specifications: SoC – StarFive JH7110 quad-core 64-bit RISC-V (SiFive U74 – RV64GC) processor @ up to 1.5 GHz with Imagination BXE-4-…

Description Jira reference number AR-1342 How Has This Been Tested? [x] Build Sid images View the full article

Description Add meson-gx mmc driver patches for use phase clock settings from dts add read amlogic,mmc-phase values from dts files update meson-axg.dtsi to use 270, 0, 0 phases disable old patch for axg phase change to 270 Jira reference number AR-1394 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] JetHub J100 (axg) boots ok [X] JetHub J80 (gxl) boots ok View the full article

Armbian 22.11 has just been released with three new SBCs, support for 64-bit RISC-V UEFI, a new ultra-minimal image optimized for software development, and various improvements. Armbian was born as a framework to build better OS images, usually Debian or Ubuntu, for Arm-based single board computers from Orange Pi, Hardkernel (ODROID), FriendlyElec, Banana Pi, and others, but now with the release of Armbian 22.11, support for the RISC-V architecture has started since the system can now generate 64-bit RISC-V UEFI images. Some other highlights of Armbian 22.11 include: Added support for Banana Pi BPI-M5 (Amlogic S905X3), ODROID-M1 (Rockchip RK3568), and Rock Pi 4C Plus (Roc…

Description Bug reporting form needs to be extended with a question: How to reproduce? View the full article

fix: (uImage change, after #5018): config: fix: replace undue export statements with declare -g; shellfmt small merge snafu but with big impacts, sorry @hzyitc View the full article

Description Resolving same problem as https://github.com/armbian/build/pull/5148 How Has This Been Tested? Untested - no hardware around. Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description add recent blobs from https://github.com/rockchip-linux/rkbin/tree/master/bin/rk35 depends on: https://github.com/armbian/rkbin/pull/18 Jira reference number [AR-9999] How Has This Been Tested? [x] Built and booted on opi5 Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

I have been working on getting U-boot upstream up to speed for the Radxa Rock-5B Rockchip RK3588 board. One of the cool features that I recently published upstream is the ability to boot the board without any kind of non-volatile media (NVM) used. View the full article

khadas-vim3/khadas-vim3l: bump to u-boot v2023.10; single-FIP for both SD/eMMC and SPI u-boots khadas-vim3/vim3l: back to single-FIP for both SD/eMMC and SPI u-boots also use flashcp to write to mtd khadas-vim3: bump to u-boot v2023.10; boot-usb-first patch now only in board folder drop kbi patch khadas-vim3l: bump to u-boot v2023.10; boot-usb-first patch now only in board folder drop kbi patch View the full article

Description thead: update linux to 6.6, enable on-board 8723ds wifi chip How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Successfully built. [x] System startup(EMMC). Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Refresh jetson-nano board config and remove no longer used files. How Has This Been Tested? [x] Boots from SD card [x] USB works [x] Ethernet works Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

We can now confidently say that PipeWire is here to stay. But of course it is not the end of the journey. There are many new areas to explore going forward, especially in WirePlumber and the ecosystem that builds around PipeWire. View the full article

Description Was having boot issues with RK3568 on edge 6.7.... Per @amazingfate 's advise.. updating montjoie's Rk35xx crypto patch from our Rk3588 patchset resolved the issue. Tested on: RK3568 - nanopi-r5s RK3399 - nanopc-t4 View the full article

This week's work centers on board portfolio expansion, kernel and U-Boot version bumps, and CI and infrastructure hardening across the build and documentation pipelines. Board support saw notable growth with the introduction of the SpacemiT K3 Pico-ITX and Luckfox Nova (RK3308B), alongside a new generic uefi-arm64-dt family and board intended to standardize UEFI device-tree targets. Qualcomm enablement advanced through Radxa Dragon Q6A and Q8B work, including UFS provisioning for Kodiak, EDL-based UFS flashing in the imager, and audioreach topology firmware for sc8280xp. Catalog assets were extended for the MaaXBoard 8ULP, Mellow Fly C5, Xiaomi Sheng, and the new Radxa an…

Why thermal management is non-negotiable for modern SBCsBy Michael Robinson As Western Europe endures severe summer conditions with climate monitors at the Copernicus Climate Change Service reporting unprecedented regional heatwaves and extreme highs stretching across the continent ambient indoor conditions are testing the limits of self-hosted edge hardware. In unconditioned workspaces, home server racks, and industrial enclosures, rising ambient air temperatures erode the thermal headroom that single-board computers (SBCs) rely on. Modern System-on-Chips (SoCs) such as the Rockchip RK3588, Allwinner, and Broadcom platforms integrate high-performance CPUs, GPUs, and neur…

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no ne…

Collaborans continue to be very active in the Linux kernel, authoring over 150 commits in this release. Here's a look at the improvements, and new features, contributed by our team, notably in hardware support, multimedia, graphics and testing. View the full article

On February 8 & 9, Collabora will be attending Integrated Systems Europe 2017, the world's largest tradeshow dedicated to professional AV and electronic systems integration, taking place at the Amsterdam RAI. View the full article

Description Add new patches to enable analog audio codec on Allwinner R40/V40. Add sound-soc-sunxi-sun4i-codec-add-r40.patch Add sound-soc-sunxi-sun8i-codec-analog-add-r40.patch Add arm-dts-sun8i-r40-add-nodes-for-audio-codec.patch Add arm-dts-sun8i-v40-bananapi-m2-berry-enable-audio-codec.patch Delete arm-dts-sun8i-r40-bananapi-m2-ultra-add-codec-analog.patch (older patch with H3 and A23 compatible) Add arm-dts-sun8i-r40-bananapi-m2-ultra-enable-audio-codec.patch (nodes and dts files split) Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test config…

Description Maint. Jira reference number AR-1341 How Has This Been Tested? [x] Build image Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Making our grand debut, Collabora will be attending electronica in Munich for the first time! Diving into the world of electronics alongside the leading examples of the industry, we're excited to partake on all fronts. View the full article

Qualcomm QCX216 LTE IoT modem was announced at the end of last year as one of the first solutions supporting the new CAT1.bis standard enabling smaller, simpler, and cheaper modules with a single antenna design. This chip also integrates a WiFi scanner exclusively used for indoor positioning. Cavli Wireless C16QS CAT1.bis is one of the first cellular IoT modules based on the Qualcomm QCX216, and we now have a clearer idea of what “cheaper” means since the company says it will sell those for less than $5 to OEMs, although that price is likely in very high quantities, possibly 100k+ or one million pieces. Cavli C16QS specifications: Wireless IC – Qualcomm QCX216 with dual-c…

This is needed to bring this board in line with the expectations of the new main build (armbian-next), which dropped uImage from meson64 kernel packages. Changes to be committed: modified: packages/bsp/aml-s9xx-box/boot/extlinux/extlinux.conf Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. More information can be found in Issue #4874 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Build and install aml-s9xx-box View …

STMicro STLINK-V3PWR is a new in-circuit debugging and programming probe made for STM32 microcontrollers and that is said to provide accurate power measurement. The probe is especially useful for battery power IoT and wireless applications and is able to measure current values from nanoamps up to ~500mA with up to ±0.5% accuracy. The STLINK-V3PWR can also power the target over a single USB cable up to 2A. STMicro STLINK-V3PWR key features and specifications: 1‑Quadrant source measurement unit: Programmable voltage source from 1.6 to 3.6 V Output current rating 500 mA with over-current protection (OCP) at 550 mA Programmable sampling rate from 1 SPS to 100 kSPS Dynamic mea…

Picks up from where we left off; https://github.com/armbian/build/pull/6296 Stable wireless depends on the following PR; https://github.com/armbian/build/pull/6314 Notables: Updated U-Boot to v2024.01 U-Boot SPL 2024.01-armbian (Feb 29 2024 - 04:57:24 -0500) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL31: v2.10.2(debug):armbian NOTICE: BL31: Built : 04:56:45, Feb 29 2024 NOTICE: BL31: Detected Allwinner H616 SoC (1823) NOTICE: BL31: Found U-Boot DTB at 0x4a09ca98, model: BananaPi M4 Zero INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller INFO: PMIC: Probing AXP305 on RSB ERROR: RSB: set run-time address: 0x10003 INFO: Could not i…

Late last week, the long-awaited kernel driver supporting 10th-generation Arm Mali GPUs was merged into drm-misc. The existing Gallium driver support has also been extended, effectively enabling GPUs on Rockchip's RK3588 platforms. View the full article

Highlighting some of the key changes Collabora worked on with Valve to improve the system update tooling on SteamOS, including the move to Desync, making applying system updates significantly faster and more reliable. View the full article

Description Adding package that fell out during last packages jungle. How Has This Been Tested? [x] WiFi works after installing it, tested on Bookworm image Checklist: Please delete options that are not relevant. [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

In collaboration with Inria, the French Institute for Research in Computer Science and Automation, Tathagata Roy shares the progress made over the past year on the CoccinelleForRust project, co-sponsored by Collabora View the full article