All Activity

This stream auto-updates     

  1. Past hour
  2. All is going normally build the image of N2 on the branch tvboxes ? I am not forming a uInitrd file. Is it a bug in my build environment or is it a common problem ?
  3. OK, I solved the problem by installing an Armbian 5.20 image I found searching for "armbian_5.20_orangepilite_debian_jessie_3.4.112.7z" on Google. However, it's not an optimal solution, because I have to be careful when updating, and Debian Jessie will no longer be supported on June 30, 2020. In order to keep it working, I have to put the following packages on hold: # apt-mark hold armbian-firmware armbian-tools-jessie linux-headers-sun8i linux-image-sun8i linux-jessie-root-orangepilite linux-u-boot-orangepilite-default sunxi-tools
  4. Actually, I have found a similar topic question in the forum. "Add: KERNELBRANCH='tag:v4.14.52' to build/userpatches/lib.config" I will give this one a go. ---------- Looks like this was a red herring. I had a look at the relevant git repo and it reports: root@ubuntu:~/build# git ls-remote -t cde3c3fdf278bbf3edc895667a65c0cc16daee0c refs/tags/release-20161011 028bc40a6d227cb553236588c43f35ad7ae2af97 refs/tags/release-20161015 3e00738277533382e6a17148b80b09a8fabea268 refs/tags/release-20170220 49c16833b723b2c4fd0768483790a4f890cf2e10 refs/tags/release-20170417 3467c559d82943f7339578f92b0817b63b8b7ddc refs/tags/release-20170705 5ab215ee7f902201d4830b0b9536135143666b42 refs/tags/release-20171015 2801809213b2ebda0ab877ede0354d48fe95cde1 refs/tags/release-20171213 So the correct structure should be KERNELBRANCH='tag:release-yyyymmdd'. More on rockwell branches/tags:
  5. Do you means "to avoid having to copy firmware files" ? I think so, but that wasn't yet a priority ...
  6. Hi All! I am having a lot of trouble making my ESPRESSObin v7 1GB DDR4 run without crashes. I have tried both Bionic (5.75 4.19.20) and Stretch (5.75 4.19.20) images, and neither are stable. I have tried with a lot of different PSUs (all switch-mode though) and booting from both microSD and USB sticks. My U-Boot is "flash-image-ddr4-1g-1cs-1000_800.bin". It seems like there is about 50% chance that it will boot without a crash. The type of crashes I get seems random. Ex TIM-1.0 WTMI-devel-18.12.0-a0a1cb8 WTMI: system early-init SVC REV: 5, CPU VDD voltage: 1.155V NOTICE: Booting Trusted Firmware NOTICE: BL1: v1.5(release):1f8ca7e (Marvell-devel-18.12.2) NOTICE: BL1: Built : 09:50:21, Feb 20 2019 NOTICE: BL1: Booting BL2 NOTICE: BL2: v1.5(release):1f8ca7e (Marvell-devel-18.12.2) NOTICE: BL2: Built : 09:50:23, Feb 20 2019 NOTICE: BL1: Booting BL31 NOTICE: BL31: v1.5(release):1f8ca7e (Marvell-devel-18.12.2) NOTICE: BL31: Built : 09:5 U-Boot 2018.03-devel-18.12.3-gc9aa92c-armbian (Feb 20 2019 - 09:45:04 +0100) Model: Marvell Armada 3720 Community Board ESPRESSOBin CPU 1000 [MHz] L2 800 [MHz] TClock 200 [MHz] DDR 800 [MHz] DRAM: 1 GiB Comphy chip #0: Comphy-0: USB3 5 Gbps Comphy-1: PEX0 2.5 Gbps Comphy-2: SATA0 6 Gbps SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode flags: ncq led only pmp fbss pio slum part sxs PCIE-0: Link down MMC: sdhci@d0000: 0, sdhci@d8000: 1 Loading Environment from SPI Flash... SF: Detected mx25u3235f with page size 256 Bytes, erase size 64 KiB, total 4 MiB OK Model: Marvell Armada 3720 Community Board ESPRESSOBin Net: eth0: neta@30000 [PRIME] Hit any key to stop autoboot: 0 starting USB... USB0: Register 2000104 NbrPorts 2 Starting the controller USB XHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning bus 1 for devices... 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found / ** File not found /boot.scr ** ## Executing script at 06d00000 Wrong image format for "source" command /boot/ 1119 bytes read in 26 ms (42 KiB/s) ## Executing script at 06d00000 221 bytes read in 10 ms (21.5 KiB/s) 16421376 bytes read in 803 ms (19.5 MiB/s) 4674731 bytes read in 241 ms (18.5 MiB/s) ** File not found /boot/dtb/marvell/armada-3720-community.dtb ** 8942 bytes read in 16 ms (544.9 KiB/s) ## Loading init Ramdisk from Legacy Image at 01100000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 4674667 Bytes = 4.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 06000000 Booting using the fdt blob at 0x6000000 Loading Ramdisk to 3f1b5000, end 3f62a46b ... OK Using Device Tree in place at 0000000006000000, end 00000000060052ed Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 4.19.20-mvebu64 ( (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP PREEMPT Fri Feb 8 09:54:18 CET 2019 [ 0.000000] Machine model: Globalscale Marvell ESPRESSOBin Board [ 0.000000] earlycon: ar3700_uart0 at MMIO 0x00000000d0012000 (options '') [ 0.000000] bootconsole [ar3700_uart0] enabled [ 4.453025] page:ffffffbf00202d80 count:0 mapcount:0 mapping:0000000000002000 index:0x1 [ 4.458439] flags: 0x0() Loading, please wait... starting version 232 Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems done. [ 6.143080] page:ffffffbf00ed4f40 count:8192 mapcount:0 mapping:0000000000000000 index:0x0 [ 6.148764] flags: 0x0() And then it just freezes. Or this one which includes a proper kernel Oops: Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 4.19.20-mvebu64 ( (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #5.75 SMP PREEMPT Fri Feb 8 09:54: 18 CET 2019 [ 0.000000] Machine model: Globalscale Marvell ESPRESSOBin Board [ 0.000000] earlycon: ar3700_uart0 at MMIO 0x00000000d0012000 (options '') [ 0.000000] bootconsole [ar3700_uart0] enabled [ 4.353254] page:ffffffbf00f32500 count:0 mapcount:0 mapping:0000000000002000 index:0x2 [ 4.358696] flags: 0x0() [ 4.451874] page:ffffffbf00fc6300 count:0 mapcount:0 mapping:0000000000002000 index:0x0 [ 4.457312] flags: 0x0() Loading, please wait... [ 4.500832] page:ffffffbf00fcf500 count:8192 mapcount:0 mapping:0000000000000000 index:0x0 [ 4.506499] flags: 0x0() starting version 232 [ 5.784308] page:ffffffbf00eeed40 count:0 mapcount:0 mapping:0000000000002000 index:0x0 [ 5.789746] flags: 0x0() [ 5.793003] page:ffffffbf00eeef40 count:0 mapcount:0 mapping:0000000000002000 index:0x0 [ 5.800585] flags: 0x0() [ 5.844097] page:ffffffbf00fd9800 count:0 mapcount:0 mapping:0000000000002000 index:0x1 [ 5.849538] flags: 0x0() Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems done. [ 6.022993] page:ffffffbf00fc6000 count:0 mapcount:0 mapping:0000000000002000 index:0x0 [ 6.028434] flags: 0x0() [ 6.031841] page:ffffffbf00ed0c80 count:0 mapcount:0 mapping:0000000000002000 index:0x0 [ 6.039272] flags: 0x0() [ 6.063514] page:ffffffbf00f3a540 count:0 mapcount:0 mapping:0000000000002000 index:0x2 [ 6.068945] flags: 0x0() [ 6.071754] page:ffffffbf00f3a500 count:0 mapcount:0 mapping:0000000000002000 index:0x2 [ 6.079784] flags: 0x0() [ 6.155043] page:ffffffbf00ed1840 count:0 mapcount:0 mapping:0000000000002000 index:0x0 [ 6.160484] flags: 0x0() Begin: Will now check root file system ... fsck from util-linux 2.29.2 [ 6.295435] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 6.298359] Modules linked in: uas mv88e6xxx dsa_core [ 6.303580] CPU: 1 PID: 25 Comm: kworker/1:1 Tainted: G B E 4.19.20-mvebu64 #5.75 [ 6.312425] Hardware name: Globalscale Marvell ESPRESSOBin Board (DT) [ 6.319093] Workqueue: events dbs_work_handler [ 6.323630] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 6.328570] pc : dev_pm_opp_set_rate+0x1b8/0x540 [ 6.333312] lr : dev_pm_opp_set_rate+0xf0/0x540 [ 6.337956] sp : ffffff8009303c10 [ 6.341363] x29: ffffff8009303c10 x28: 0000000000000000 [ 6.346828] x27: ffffffc03be3ce50 x26: 000000000ee6b280 [ 6.352293] x25: ffffffc03be3cd80 x24: ffffffc03ffb7298 [ 6.357759] x23: ffffffc03be3ce00 x22: 000000001dcd6500 [ 6.363224] x21: 0000000000000000 x20: ffffff8008f79000 [ 6.368690] x19: ffffffc03bef7e00 x18: 0000000000000007 [ 6.374155] x17: 0000000000000001 x16: 0000000000000019 [ 6.379621] x15: 0000000000000100 x14: 0000000000000400 [ 6.385086] x13: 0000000000000000 x12: 0000000000000001 [ 6.390551] x11: 0000000000000000 x10: 0000000000000910 [ 6.396017] x9 : ffffff8009303d70 x8 : 00000000005fd500 [ 6.401484] x7 : ffffffc03f255480 x6 : 0000000000000000 [ 6.406948] x5 : 0000000000000001 x4 : 0000000000000000 [ 6.412415] x3 : ffffffc03fa52700 x2 : 0000000000000000 [ 6.417878] x1 : 0000000000000000 x0 : 0000000000002000 [ 6.423351] Process kworker/1:1 (pid: 25, stack limit = 0x(____ptrval____)) [ 6.430513] Call trace: [ 6.433040] dev_pm_opp_set_rate+0x1b8/0x540 [ 6.437426] set_target+0x40/0x70 [ 6.440829] __cpufreq_driver_target+0x184/0x5b0 [ 6.445576] od_dbs_update+0xbc/0x1a0 [ 6.449341] dbs_work_handler+0x3c/0x70 [ 6.453292] process_one_work+0x1e0/0x330 [ 6.457407] worker_thread+0x40/0x460 [ 6.461170] kthread+0x128/0x130 [ 6.464487] ret_from_fork+0x10/0x1c [ 6.468165] Code: f9403fb6 54001a48 f94016fb b940d261 (f940001c) [ 6.474431] ---[ end trace 8d8b611cab491bfc ]--- [ 8.357420] Unable to handle kernel paging request at virtual address 002f343030323358 [ 8.362801] Mem abort info: [ 8.365652] ESR = 0x96000004 [ 8.368790] Exception class = DABT (current EL), IL = 32 bits [ 8.374878] SET = 0, FnV = 0 [ 8.378014] EA = 0, S1PTW = 0 [ 8.381236] Data abort info: [ 8.384170] ISV = 0, ISS = 0x00000004 [ 8.388139] CM = 0, WnR = 0 [ 8.391188] [002f343030323358] address between user and kernel address ranges [ 8.398540] Internal error: Oops: 96000004 [#2] PREEMPT SMP [ 8.404242] Modules linked in: uas mv88e6xxx dsa_core [ 8.409457] CPU: 1 PID: 175 Comm: d0032004.mdio-m Tainted: G B D E 4.19.20-mvebu64 #5.75 [ 8.418757] Hardware name: Globalscale Marvell ESPRESSOBin Board (DT) [ 8.425396] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 8.430344] pc : mutex_lock+0x14/0x40 [ 8.434156] lr : mv88e6xxx_adjust_link+0x3c/0xa0 [mv88e6xxx] [ 8.439900] sp : ffffff8009afbc50 [ 8.443306] x29: ffffff8009afbc50 x28: 0000000000000000 [ 8.448771] x27: ffffff8009077a48 x26: ffffff8008f79000 [ 8.454237] x25: ffffffc03ba49008 x24: ffffff8009077000 [ 8.459703] x23: 732f343030323340 x22: 732f343030323358 [ 8.465167] x21: 0000000000000013 x20: ffffffc03f31d000 [ 8.470633] x19: ffffffc03f31d000 x18: ffffffc03c3a1090 [ 8.476099] x17: 0000000000000001 x16: 0000000000000019 [ 8.481565] x15: 0000000000000100 x14: 0000000000000400 [ 8.487030] x13: 0000000000000000 x12: 0000000000000001 [ 8.492495] x11: 0000000000012adb x10: 0000000000000040 [ 8.497961] x9 : ffffff8008f92d70 x8 : ffffffc03cc00248 [ 8.503426] x7 : ffffffc03cc00430 x6 : 00000000000001c0 [ 8.508892] x5 : 000000403706c000 x4 : 0000000000000000 [ 8.514358] x3 : ffffff8000bb61a0 x2 : ffffffc03be8c100 [ 8.519824] x1 : 0000000000000000 x0 : 732f343030323358 [ 8.525295] Process d0032004.mdio-m (pid: 175, stack limit = 0x(____ptrval____)) [ 8.532904] Call trace: [ 8.535435] mutex_lock+0x14/0x40 [ 8.538881] mv88e6xxx_adjust_link+0x3c/0xa0 [mv88e6xxx] [ 8.544302] mdiobus_read+0x48/0x70 [ 8.547881] m88e1121_did_interrupt+0x1c/0x30 [ 8.552364] phy_change+0x2c/0x108 [ 8.555857] phy_interrupt+0x1c/0x30 [ 8.559536] handle_nested_irq+0xb0/0x130 [ 8.563705] mv88e6xxx_g2_irq_thread_fn+0x98/0xd0 [mv88e6xxx] [ 8.569567] handle_nested_irq+0xb0/0x130 [ 8.573732] mv88e6xxx_g1_irq_thread_work+0x9c/0xd8 [mv88e6xxx] [ 8.579823] mv88e6xxx_irq_poll+0x18/0x38 [mv88e6xxx] [ 8.584978] kthread_worker_fn+0xac/0x198 [ 8.589096] kthread+0x128/0x130 [ 8.592414] ret_from_fork+0x10/0x1c [ 8.596091] Code: d2800001 d5384102 910003fd f9800011 (c85ffc03) [ 8.602354] ---[ end trace 8d8b611cab491bfd ]--- While running, I get errors like this one: [ 71.136812] BUG: Bad page state in process khugepaged pfn:31d99 [ 71.140206] page:ffffffbf00c76640 count:0 mapcount:0 mapping:0000000000002000 index:0x0 [ 71.148428] flags: 0x0() [ 71.151049] raw: 0000000000000000 0000000000000000 ffffffbf00c76648 0000000000002000 [ 71.159015] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 71.166975] page dumped because: non-NULL mapping [ 71.172329] BUG: Bad page state in process khugepaged pfn:3261c [ 71.178001] page:ffffffbf00c98700 count:0 mapcount:0 mapping:0000000000002000 index:0x0 [ 71.186236] flags: 0x0() [ 71.188853] raw: 0000000000000000 0000000000000000 ffffffbf00c98708 0000000000002000 [ 71.196825] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 71.204782] page dumped because: non-NULL mapping Once successfully booted, setting the CPUfreq governor to "performance" seems to make it more stable. Am I the only one having problems getting a stable boot on V7? Has anyone of you any tips on how to make it stable? I am willing to try compiling a new kernel if some experimental patches exists.
  7. I've booted from SD, bring a copy of the image via SSH/SCP, then "dd if=Armbian_5.86_Odroid-n2_Debian_buster_default_5.1.0_20190514.img of=/dev/mmcblk0 bs=100M" ...
  8. actual - where jessie has been archived - you should start with the following /etc/apt/sources.list: deb jessie main contrib non-free deb-src jessie main contrib non-free deb jessie/updates main contrib non-free deb-src jessie/updates main contrib non-free and enter the following commands: sudo apt-get update sudo apt-get upgrade sudo apt-get dist-upgrade then change the content of /etc/apt/sources.list to: deb stretch main contrib non-free deb stretch-updates main contrib non-free deb stretch-backports main contrib non-free deb stretch/updates main contrib non-free then redo: sudo apt-get update sudo apt-get upgrade sudo apt-get dist-upgrade and after that for cleanup: sudo apt-get autoremove sudo apt-get autoclean You have to check that there is no other sources-list or another package-list in the directory /etc/apt/sources.list.d
  9. Today
  10. Hi Igor How about including "webseeds"/"http seeds" in your .torrent files? You already have a lot of mirrors (ex, so it would be very helpful if your torrent client could also download from all those mirrors. Spec:
  11. What headers do you compile when you upgrade ? Now Disko does not work LIGHTDM, so I do not build these versions. After the packages are fixed, I will continue to build them.
  12. Actually, I have found a similar topic question in the forum. "Add: KERNELBRANCH='tag:v4.14.52' to build/userpatches/lib.config" I will give this one a go.
  13. I downloaded the kernel source and kernel headers on a rk3288 rockchip (tinkerboardS) and noticed there was a mismatch between kernel version, armbian release and chipset (rockchip64) - see below. root@tinkerboard:~# uname -a Linux tinkerboard 4.4.174-rockchip #7 SMP Sun Feb 10 11:57:26 CET 2019 armv7l armv7l armv7l GNU/Linux root@tinkerboard:~# cat /etc/armbian-release # PLEASE DO NOT EDIT THIS FILE BOARD=tinkerboard BOARD_NAME="Tinkerboard" BOARDFAMILY=rockchip VERSION=5.75 LINUXFAMILY=rockchip BRANCH=default ARCH=arm IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm KERNEL_IMAGE_TYPE=zImage root@tinkerboard:/usr/src# ls * linux-rockchip64-default_4.4.178_5.85_config.xz linux-source-4.4.178-rockchip64.tar.xz
  14. I will check this option at myself and I will write result. How do you install the system in eMMC (what commands do you use) ?
  15. You can't have both at the same time. Not on Armbian and not on any other system unless you enforce virtualization, adjust ports of many shared services ...
  16. I have spent a considerable amount reading docs and getting my head around building a custom default kernel & desktop image. Patching the kernel and optimising the desktop environment is working well. The remaining question is: How do I select a specific - kernel 4.4.174 (based on armbian-release 5.75) ? It defaults to 4.4.176 and 5.86.
  17. How do you even edit the uEnv.ini When I flashed the (latest) Armbian_5.78_Aml-s812_Debian_stretch_next_5.1.0-rc5-next-20190418-g3f018f4a0-dirty.img with rufus, I cant even access my sd card (says i need to format) I downloaded previous versions and 5.73 lets me see the uEnv.ini file How do I get logs? Right now it goes multicoloured pixels then black screen then remains at no signal. I can see the ip address of it in my router admin page. S802 btw (chinese clone tv box)
  18. my experience isn't smooth at all was running 5.57 (not sure what that number refers to) but i am sure it's jessie. apt-get update && upgrade & dist-upgrade does not switch to stretch. I've manually changed sources (armbian.list) replaced jessie -> stretch , ran the same, nothing got upgraded., rebooted, same. manually removed kernel apt-get purge linux-jessie-root-next-orangepipc apt-get install linux-stretch-root-next-orangepipc boots with 5.85, still says jessie ?! "Welcome to ARMBIAN 5.85 stable Debian GNU/Linux 8 (jessie) 3.4.113-sun8i" can't install armbian-config : The following packages have unmet dependencies: armbian-config : Depends: expect but it is not installable Depends: resolvconf but it is not installable Depends: debconf-utils but it is not installable Depends: html2text but it is not installable Depends: html2text but it is not installable Depends: dirmngr but it is not installable E: Unable to correct problems, you have held broken packages. any ideas? [update] nvm, had sources.list stuffed up.
  19. Yeah, just retried with his latest patches (both kernel and FFmpeg using some new flag M2M_HOLD_CAPTURE_BUF WIP) and it's better, but blocks are still flickering a little. However, most of the issues are gone so, I guess that between mid-June~July H264 support will be top notch. VP8 support has been added to the driver, but either his FFmpeg is not able to decode this format, or MPV refuses to use this hardware decoder ("codec vp8 is not on whitelist" error).
  20. I've build Armbian_5.87_Orangepi3_Ubuntu_bionic_dev_5.1.3_desktop and it's clocked at 1.8Ghz. But what is a problem is that there's no throttling happening. It goes over 95°C. I'm sure it would even go higher if I let the heatsink warm up fully. Here a screenshot. The second time I run 7z b. 94°C and no throttling happening. And is it possible to put those files needed for wifi in the correct place in the build?
  21. Yesterday
  22. Can this work on the Armbian N2 release? Also, I have EMMC and no SD CARD. I got about as far as But, Armbian for N2 does not have boot.cmd. Do you mean boot.ini? Further, there is no boot.scr so this command doesn't appear to work. And, also I believe "-A arm" should reflect ARM64 or arm64? I'm not sure which notation is correct. But, the N2 is an ARM64 board. There also appears to be an error with CRYPTSETUP in /etc/initramfs-tools/initramfs.conf, as it is reported to be deprecated. Hopefully someone can assist with continuing this guide as I'd really like to get the whole EMMC encrypted. Thanks in advance.
  23. Alright, I understand that downloading some precompiled binary by who-knows-who, and tinkering here and there to get it working, sounds shady and fucking annoying. So, instead, I made a script that allows you to download a fresh official FFmpeg, apply @Kwiboo and @jernej patches against it to get V4L2 Request API support, and compile the whole thing (binary and dynamic libraries). Now, this *won't* install the patched FFmpeg, for reasons stated above. I didn't apply bbrezillon patches, since I haven't tested his latest modifications and, ATM, there were issues here and there. I'd love some good H264 support, but you'll have to wait a bit.
  24. Hello, unfortunately there isn't a dual boot feature: the main reason is that the u-boot version originally shipped with the box is from 2014. It is quite outdated and it is able to boot Android boot images only. When I started the project I made the design choice to support mainline u-boot to best support Armbian. In theory the original u-boot can boot from an external SD card, but the kernel, initramfs and other bits should be "mangled" to fit into an Android boot image, something I never experimented with. The bootlog is available only from the serial port, so no way to show it up on screen. If you take a look to the Armbian downloads page you can download the CSC official image and found the instructions to backup and restore the existing eMMC image.
  25. @balbes150 , thanks for your 5.1.0 image ! I've tried to enhance boot verbosity by adding "loglevel=7" in bootargs in /boot/boot.ini but it didn't worked since "cat /proc/cmdline" still showing original bootargs, it seems that bootargs from /boot/boot.ini is simply ignored ... I wish to have more verbosity, because I'm unable to make it boot from eMMC, something must append during this last line and login prompt, since on eMMC it is not reaching the login prompt and it stuck at this "re-mount". [ 7.812132] EXT4-fs (mmcblk1p2): re-mounted. Opts: commit=600,errors=remount-ro Debian GNU/Linux buster/sid odroid ttyAML0 odroid login:
  26. Lima project is generic, unrelated to Pinephone or other specific hardware. I seriously doubt this (yet another remix of A64) will have impact on anything. Development, especially community driven, is slow and sometimes painful process. It is faster, but R40 runs at half (dvfs is broken) CPU speed which means numbers are not alright.
  27. First, install the DT compiler : Next, copy the /boot/dtb/allwinner/sun50i-h6-orangepi-one-plus.dtb into /boot/dtb/allwinner/sun50i-h6-orangepi-one-plus.dtb-ORIG as backup. Third, decompile it into DTS : dtc -@ -I dtb -O dts -o /root/sun50i-h6-orangepi-one-plus.dts-5.1.0 /boot/dtb/allwinner/sun50i-h6-orangepi-one-plus.dtb Fourth, edit the file /root/sun50i-h6-orangepi-one-plus.dts-5.1.0 by adding this in the aliases node : ethernet0 = "/soc/ethernet@5020000"; Fifth, recompile the DTB and reboot : dtc -@ -I dts -O dtb -o /boot/dtb/allwinner/sun50i-h6-orangepi-one-plus.dtb /root/sun50i-h6-orangepi-one-plus.dts-5.1.0 About "cpu-freq", I don't really know, I'm not the expert on this one ...
  28. Hmm... Is there somewhere a short description? There is also something else a little bit 'strange'. The max clockspeed is just 1488MHz. It was always 1888MHz? orangepioneplus:~$ lscpu Architecture: aarch64 Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 1 Core(s) per socket: 4 Socket(s): 1 NUMA node(s): 1 Vendor ID: ARM Model: 4 Model name: Cortex-A53 Stepping: r0p4 CPU max MHz: 1488.0000 CPU min MHz: 480.0000 BogoMIPS: 48.00 NUMA node0 CPU(s): 0-3 Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid
  1. Load more activity