Hqnicolas

Joshua Riek VPU on Armbian Kernel 6.1 Vendor img File, Desktop Kernel 6.1 Joshua Riek: https://github.com/hqnicolas/ubuntu-rockchip/actions ✔️ HDMI Audio ✔️ WIFI 2.4 + 5ghz ✔️ Ethernet ❌ Bluetooth ✔️ NPU ✔️ VPU ✨ 1080P 60FPS ✨ ZERO DROP FRAMES ✔️ GPU Wifi fix: https://drive.google.com/file/d/1agxdBh8gruXn8It_pa_DDyJnzVxbDK8g/view?usp=sharing DTS + DTB: https://drive.google.com/file/d/1E0GBU3vog_6Y72V3EUMjgQhwi6WX3v6w/view?usp=sharing RK3566-H96-MAX-VENDOR-61-V12.zip fix_610_h96_Wifi_Bluetooth.zip Next Step: Fix Bluetooth how to edit this image: sudo losetup --partscan /dev/loop13 disk_image.img mkdir /tmp/disk_image sudo mount /dev/loop13p1 /tmp/disk_image ####### DROP the new DTB File to /tmp/disk_image/boot/dtb/rockchip ########## sudo fstrim -v /tmp/disk_image sudo umount /tmp/disk_image sudo losetup --detach /dev/loop13 You could also add the wifi fix to the image: sudo mkdir -p /tmp/disk_image/usr/lib/scripts sudo cp ap6335-bluetooth.service /tmp/disk_image/usr/lib/systemd/system/ sudo cp ap6335-bluetooth.sh /tmp/disk_image/usr/lib/scripts/ sudo cp brcm_patchram_plus /tmp/disk_image/usr/bin/ sudo cp fw_bcm4335b0_ag.bin /tmp/disk_image/lib/firmware/brcm/ sudo cp BCM4335A0.hcd /tmp/disk_image/lib/firmware/brcm/ sudo cp brcmfmac4335-sdio.txt /tmp/disk_image/lib/firmware/brcm/ sudo mkdir -p /tmp/disk_image/data/cfg/ sudo cp device_info.txt /tmp/disk_image/data/cfg/ cd /tmp/disk_image/lib/firmware/brcm/ sudo ln -s fw_bcm4335b0_ag.bin brcmfmac4335-sdio.h96-TVbox,rk3566.bin sudo ln -s fw_bcm4335b0_ag.bin brcmfmac4335-sdio.bin sudo chmod 775 /tmp/disk_image/usr/lib/scripts/ap6335-bluetooth.sh sudo chmod 775 /tmp/disk_image/usr/lib/systemd/system/ap6335-bluetooth.service sudo chmod 775 /tmp/disk_image/data/cfg/device_info.txt sudo chmod 775 /tmp/disk_image/usr/bin/brcm_patchram_plus Fix CPU clock sudo -i # See policy to see how CPUs are grouped. echo conservative > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor echo conservative > /sys/devices/system/cpu/cpu4/cpufreq/scaling_governor echo conservative > /sys/devices/system/cpu/cpu6/cpufreq/scaling_governor exit cat /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor Check GPU Frequency ls /sys/devices/platform/fde60000.gpu/devfreq/fde60000.gpu/ cat /sys/devices/platform/fde60000.gpu/devfreq/fde60000.gpu/cur_freq cat /sys/devices/platform/fde60000.gpu/devfreq/fde60000.gpu/min_freq cat /sys/devices/platform/fde60000.gpu/devfreq/fde60000.gpu/max_freq Check CPU frequency ls /sys/devices/system/cpu/cpu0/cpufreq cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq @maka Today I take the U-Boot from test image Kernel Vendor 6.1: https://drive.google.com/file/d/1rKzJ2RbxEBgSdqUy2O0-qhIipBakyt9t/view?usp=drive_link and unpack it inside Joshua Riek h96-max v56 24.04 image https://github.com/hqnicolas/ubuntu-rockchip/actions Change the UUID on armbian boot file Using this method: sudo losetup --partscan /dev/loop14 disk_image.img mkdir /tmp/disk_image sudo mount /dev/loop14p1 /tmp/disk_image ####### DROP the new File to /tmp/disk_image/u-Boot ########## sudo fstrim -v /tmp/disk_image sudo umount /tmp/disk_image sudo losetup --detach /dev/loop14 Same Experience as Armbian with VPU enabled dmesg? glmark2:

Pure android is great, but I think you don't know what you allowing within your network Don't look at the light, you might end up being an enlightener

Pure android is great, but I think you don't know what you allowing within your network Don't look at the light, you might end up being an enlightener

I think you need to find an android forum. "ARM Debian Linux" = Armbian, is an Linux distro

@SteeMan find it: x88 pro RK3318

@Kenneth Hidalgo ask for Ubuntu images I want to make it clear to everyone that now The H96 MAX Became Full supported by armbian Mainline 25/05/2024 latest release: https://github.com/armbian/community/releases/tag/24.5.0-trunk.667

https://chinagadgetsreviews.com/download-android-10-new-stock-firmware-for-x88-pro-10-tv-box.html Read other people effords Try and error Read other people effords Try and Run it!

Truncate 2 partitions image ``` sudo losetup --partscan /dev/loop13 disk_image.img sudo e2fsck -f /dev/loop13p1 sudo e2fsck -f /dev/loop13p2 ' sudo resize2fs /dev/loop13p1 -M sudo resize2fs /dev/loop13p2 -M ' ### RUN THE "DISC" software and resize partition using the gui fdisk -l disk_image.img sudo losetup --detach /dev/loop13 truncate -s $(INSERT THE (END*BLOCKSIZE) OF PARTITION2 HERE) disk_image.img sudo losetup --partscan /dev/loop13 disk_image.img mkdir /tmp/disk_image sudo mount /dev/loop13p1 /tmp/disk_image sudo fstrim -v /tmp/disk_image sudo umount /tmp/disk_image sudo mount /dev/loop13p2 /tmp/disk_image sudo fstrim -v /tmp/disk_image sudo umount /tmp/disk_image sudo losetup --detach /dev/loop13 ```

Nice! Enable SDHCI + emmc1 + emmc2 + emmc3 on DTS and recompile Check if usb*_dphy it's OTG or HOST on DTS

- Update: Rockchip Kernel 6.1 Vendor ✔️ HDMI Audio ✔️ WIFI 2.4 + 5ghz ✔️ Ethernet ❌ Bluetooth ✔️ NPU ❌ VPU ✔️ GPU Wifi-K610: https://drive.google.com/file/d/1B1LmAylalETcnBEWiPiJHL0MjK5xlIV4/view Wifi-Fix: https://drive.google.com/file/d/1agxdBh8gruXn8It_pa_DDyJnzVxbDK8g/view?usp=drive_link cd /lib/firmware/brcm/ sudo wget https://github.com/CoreELEC/brcmfmac_sdio-firmware-aml/raw/master/firmware/brcm/fw_bcm4335b0_ag.bin sudo ln -s fw_bcm4335b0_ag.bin brcmfmac4335-sdio.h96-TVbox,rk3566.bin sudo reboot now nmcli dev wifi sudo rmmod brcmfmac_wcc brcmfmac brcmutil modprobe brcmfmac - Image: Updated K610 test image: https://drive.google.com/file/d/1rKzJ2RbxEBgSdqUy2O0-qhIipBakyt9t/view?usp=drive_link - BaseFiles: RK3566-H96-MAX-VENDOR-61-V12: https://drive.google.com/file/d/1E0GBU3vog_6Y72V3EUMjgQhwi6WX3v6w/view?usp=sharing

- Update: Rockchip Kernel 5.1 Legacy ❌ HDMI Audio ✔️ WIFI 2.4 + 5ghz ✔️ Ethernet ✔️Bluetooth ✔️ NPU ❌ VPU ✔️ GPU Wifi-K510: https://drive.google.com/file/d/1B1LmAylalETcnBEWiPiJHL0MjK5xlIV4/view sudo apt-mark hold linux-image-5.10.160-rockchip linux-headers-5.10.160-rockchip cd /lib/firmware/brcm/ sudo wget https://github.com/CoreELEC/brcmfmac_sdio-firmware-aml/raw/master/firmware/brcm/fw_bcm4335b0_ag.bin sudo ln -s fw_bcm4335b0_ag.bin brcmfmac4335-sdio.bin sudo reboot now nmcli dev wifi sudo rmmod brcmfmac_wcc brcmfmac brcmutil modprobe brcmfmac - Image: Updated K510 test image: https://drive.google.com/file/d/18nsBoAjroMBSnNM0mr7qoVI_rKsReufM/view?usp=sharing - BaseFiles: RK3566-H96-MAX-LEGACY-51-V7: https://drive.google.com/file/d/1C6xce8CTsIaI8znwRjhg_KcskKtTXJR_/view?usp=sharing edit Rockchip U-boot Legacy 4.19 DTS: https://github.com/hqnicolas/u-boot/blob/next-dev-v2024.03/arch/arm/dts/rk3566-h96.dts edit Rockchip U-boot Legacy 4.19 DEFCONFIG: https://github.com/hqnicolas/u-boot/blob/next-dev-v2024.03/configs/h96-rk3566_defconfig dmesg after wifi install: glmark2-es2-wayland RK3566-H96-MAX-LEGACY-51-V6.zip

find a board with u-boot 2024 and rebase your board config file I use OrangePi3B as a base config

to use RK3568 DTS on RK3566 chip you will need to add these lines on the botom of dts &gpu_opp_table { /delete-node/ opp-800000000; }; &dmc_opp_table { opp-324000000 { opp-hz = /bits/ 64 <324000000>; opp-microvolt = <875000>; }; opp-528000000 { opp-hz = /bits/ 64 <528000000>; opp-microvolt = <875000>; }; }; &cpu0_opp_table { /delete-node/ opp-1992000000; opp-216000000 { opp-hz = /bits/ 64 <216000000>; opp-microvolt = <825000 825000 1150000>; clock-latency-ns = <40000>; }; opp-312000000 { opp-hz = /bits/ 64 <312000000>; opp-microvolt = <825000 825000 1150000>; clock-latency-ns = <40000>; }; }; /delete-node/ &combphy0_us; /delete-node/ &gmac0_clkin; /delete-node/ &gmac0_xpcsclk; /delete-node/ &gmac0; /delete-node/ &gmac_uio0; /delete-node/ &pcie30_phy_grf; /delete-node/ &pcie30phy; /delete-node/ &pcie3x1; /delete-node/ &pcie3x2; /delete-node/ &qos_pcie3x1; /delete-node/ &qos_pcie3x2; /delete-node/ &qos_sata0; /delete-node/ &sata0;

https://gprivate.com/6b9kg 1 - Follow the Build Armbian instructions if it doesnt Build your image as espected rm -rf build git clone --depth 1 --branch v24.05 https://github.com/armbian/build try again and again and again and again gh pr checkout 6618

@gen ha it's happnd because you're using a RK3568 DTS to build an RK3566 DTS and it will mess with Mdio this is your solution: &mdio1 { rgmii_phy1: phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x0>; }; }; &gmac1 { phy-mode = "rgmii"; clock_in_out = "input"; snps,reset-gpio = <&gpio2 RK_PD1 GPIO_ACTIVE_LOW>; snps,reset-active-low; /* Reset time is 20ms, 100ms for rtl8211f */ snps,reset-delays-us = <0 20000 100000>; assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>; pinctrl-names = "default"; pinctrl-0 = <&gmac1m1_miim &gmac1m1_tx_bus2 &gmac1m1_rx_bus2 &gmac1m1_rgmii_clk &gmac1m1_rgmii_bus &gmac1m1_clkinout>; tx_delay = <0x4f>; rx_delay = <0x26>; phy-handle = <&rgmii_phy1>; status = "okay"; };

Find the USB port list and change 1 port USB from OTG to HOST &usbdrd_dwc3 { dr_mode = "otg"; extcon = <&usb2phy0>; status = "okay"; }; &usbdrd_dwc3 { dr_mode = "host"; extcon = <&usb2phy0>; status = "okay"; };

@maka too late I already wasted my time too hahaha Kernel 610: sudo nano /var/log/dmesg

@Deoptim I'm releasing kernel 6.1 updated Test Image today.... Updated K610 test image: https://drive.google.com/file/d/1rKzJ2RbxEBgSdqUy2O0-qhIipBakyt9t/view?usp=drive_link Build your own image: RK3566-H96-MAX-VENDOR-61-V12: https://drive.google.com/file/d/1E0GBU3vog_6Y72V3EUMjgQhwi6WX3v6w/view?usp=sharing

@Energokom to build your DDR_1056mhz ADD This lines to the botom of the file Armbian: build/config/board/yourboardname.conf # Newer blobs. Tested to work with 1056MHz DDR_BLOB="rk35/rk3566_ddr_1056MHz_v1.18.bin" BL31_BLOB="rk35/rk3568_bl31_v1.43.elf" # NOT a typo, bl31 is shared across 68 and 66 ROCKUSB_BLOB="rk35/rk3566_spl_loader_1.14.bin" # For `EXT=rkdevflash` flashing

@Deoptim you will need to focus on U-boot config. Kernel from vendor have differences from mainline, the first thing you need to do is REBASE your DTS to 6.1. Download the armbian 6.1 kernel and compare with vscode your DTS with vendor DTS. I'm looking at Uboot for Kernel vendor 6.1 and it was injecting incompatible drivers before boot

@Deoptim You have UART debug TTL and SD Card reader? lets see what you have I think you will find better support when found people with the same board

@maka you gave me an idea, using the rebased DTS with firefly U-Boot @gen ha fix Kernel Panic for WIFI! Things that have been fixed: sudo nano /var/log/dmesg the loop is caused by kernel: Modules linked in: sprdwl_ng(+) sprdbt_tty uwe5622_bsp_sdio it's trying to input this driver from uboot to fix this kernel panic, just change this lines on board config file MODULES="sprdbt_tty sprdwl_ng" MODULES_BLACKLIST_LEGACY="bcmdhd" to this MODULES_BLACKLIST_LEGACY="sprdbt_tty sprdwl_ng" Thanks @maka

This forum topic is our documentation

me and @pocosparc have soldered a SD Card reader to boot from external SD soldered just the socket works out of the box

Compiled and tested with kernel 6.1 vendor Kernel Panic at startup Today I'm Working on Kernel 5.1 legacy wifi..... Have Rebased the entire 5.1 DTS to Firefly DTS and it keep's PANIC "Failed with result 'signal'." rk3566-h96-tvbox-REBASED-FIREFLY-K51.dts