Hqnicolas

Bullseye 22.04 My image H96 MAX V12 RK3318 4gb EMMC 64gb Tested ☑️ Armbian-unofficial_24.5.0-trunk_Rk3318-box_bullseye_current_6.6.23_minimal (SERVER)

This Chinese box It's always a surprise. sometimes it works, sometimes it doesn't Kernel V6.6 was the new standart if you build any image let me know @Antonio Cahuana About the hardware acceleration, i think you can install Video drivers: https://developer.arm.com/downloads/-/mali-drivers/bifrost-kernel https://docs.mesa3d.org/download.html https://docs.mesa3d.org/drivers/panfrost.html

persistence beats talent tastefull this is better.... ################################### my suggestion, use my methods to extract DTB # 1 method # 2 method # 3 method ################################### With the DTB you can use the @hzdm method to build image ###################################

This is explained on 4gb device topic.

this error happened to other users If you follow the tutorial You you find the 8GB devices Fix If you're hoping to run a graphical user interface, stick to Android. the original video driver came from android (kernel 4.2)

It looks a lot like a soldering problem in the connector, these Chinese connectors are difficult to work and boxy

Welcome to Chinese TV box Nightmare Here on this side of Linux, the manufacturer modifies the hardware without notifying anyone. The only creativity that comes from China is changing adapters on consolidated boards, otherwise everything is a copy. you will need to inject the driver for your LAN device. This device Looks like RTL8211C Use wifi to connect to the web. sudo apt-get install hwinfo hwinfo Thats the device that originally work on my device. ... ... P: /devices/platform/fe010000.ethernet/mdio_bus/stmmac-0/stmmac-0:00 M: stmmac-0:00 R: 00 U: mdio_bus T: PHY V: RTL8211F Gigabit Ethernet E: DEVPATH=/devices/platform/fe010000.ethernet/mdio_bus/stmmac-0/stmmac-0:00 E: SUBSYSTEM=mdio_bus E: DEVTYPE=PHY E: DRIVER=RTL8211F Gigabit Ethernet E: OF_NAME=ethernet-phy E: OF_FULLNAME=/ethernet@fe010000/mdio/ethernet-phy@0 E: OF_COMPATIBLE_0=ethernet-phy-ieee802.3-c22 E: OF_COMPATIBLE_N=1 E: MODALIAS=of:Nethernet-phyT(null)Cethernet-phy-ieee802.3-c22 If you identify that the device is the same as the original driver, then there are physical problems with your device or the cable, check if everything works fine on Android. rewrite the android to the device and test the LAN sd: /devices/platform/fd000000.usb/xhci-hcd.7.auto/usb3/3-1/3-1:1.0/host0/target0:0:0/0:0:0:0 RTL8226B_RTL8221B 2.5Gbps PHY: module = realtek RTL8221B-VM-CG 2.5Gbps PHY: module = realtek RTL8208 Fast Ethernet: module = realtek RTL8221B-VB-CG 2.5Gbps PHY: module = realtek RTL8201CP Ethernet: module = realtek RTL8366RB Gigabit Ethernet: module = realtek RTL8211F Gigabit Ethernet: /devices/platform/fe010000.ethernet/mdio_bus/stmmac-0/stmmac-0:00 RTL8211F Gigabit Ethernet: module = realtek RTL8211B Gigabit Ethernet: module = realtek RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY: module = realtek RTL8211DN Gigabit Ethernet: module = realtek RTL8211 Gigabit Ethernet: module = realtek RTL8226-CG 2.5Gbps PHY: module = realtek RTL8226 2.5Gbps PHY: module = realtek Generic FE-GE Realtek PHY: module = realtek RTL8211F-VD Gigabit Ethernet: module = realtek RTL8365MB-VC Gigabit Ethernet: module = realtek RTL8211E Gigabit Ethernet: module = realtek RTL8201F Fast Ethernet: module = realtek RTL8211C Gigabit Ethernet: module = realtek RTL9000AA_RTL9000AN Ethernet: module = realtek If your device is not in the above list then you need to install the correct driver "ip a" Command: 1: lo: <LOOPBACK,UP,LOWER_UP> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether ff:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff altname end0 inet ff:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff scope global dynamic noprefixroute eth0 valid_lft 2467sec preferred_lft 2467sec inet6 ff:ff:ff:ff:ff:ff scope global dynamic noprefixroute valid_lft 2712sec preferred_lft 2712sec inet6 ff:ff:ff:ff:ff:ff scope link noprefixroute valid_lft forever preferred_lft forever 3: docker0: 85: veth5f87d43@if84: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP group default link/ether brd ff:ff:ff:ff:ff:ff link-netnsid 0 inet6 ff:ff:ff:ff:ff:ff scope link valid_lft forever preferred_lft forever

Try this:

good Job! you was working hard for so long. rk3566-jianpian.dts

This is the 4gb topic! did you have a ubuntu 22.04 x86-64 computer? You can build it by your self: 1. Copy the h96-max-v56 directory to build/packages/blobs/ directory 2. Copy the h96-max-v56.conf file to the build/config/boards/ directory 3. Run the image build https://docs.armbian.com/Developer-Guide_Build-Preparation/ https://drive.google.com/file/d/1oYK4EhbfcThfBs3F1Ri582jf6PYYp5x2/view?usp=drive_link https://drive.google.com/file/d/1G5KBVq1oR-QrIKG3FoHmUTwh8OSAG018/view https://forum.armbian.com/topic/28895-efforts-to-develop-firmware-for-h96-max-v56-rk3566-8g64g/?do=findComment&comment=175357 You can also try the Gnome Wayland Armbian 23.11.0 Desktop Gnome V1.0 The Latest unofficial Debian 12 BookWorm Desktop Gnome v1.0 The Latest unofficial

did you archive it? if your wayland dispay acceleration works, you will need a patched chromium with WebRTC enabled

ok, share with us how did you archive this acceleration. How I kwnew it: https://forum.armbian.com/topic/22476-video-playback/?do=findComment&comment=154884 https://forum.armbian.com/topic/22476-video-playback/?do=findComment&comment=154951 https://forum.armbian.com/topic/22476-video-playback/?do=findComment&comment=154967 @maka bring it to your chromium! https://forum.armbian.com/topic/22476-video-playback/?do=findComment&comment=155372

I don't put bluetooth drivers there you need to figure out and bring this to our forum here your patch to follow: https://github.com/gouwa/hwpacks/blob/master/wifibt/bluetooth-ap6335.conf https://datasheetspdf.com/datasheet/AP6335.html https://download.kamami.pl/p562297-AP6335 datasheet_V1.3_02102014.pdf @Martynas SkapasBring that to us!

You can try to apply things from Manjaro Arc Linux. the build something with hardware acceleration for RK3566 and I test it on Rock3A device. To build graphic responsive distro: Follow the path: Rk3566 ----> ARK -----> Manjaro ----> Wayland ------> Chromium

the image was build from trunk, by default it doesn´t update. You can use it to upgrade images build from trunk

You can try something, open the TV box plastic case, and take a shot from wifi module. By the number you can download the driver and copy via thumb flash drive to Linux. Sent from my 22021211RC using Tapatalk

@Andriy is talking aboud a Volumio OS distro, Transform your Raspberry Pi, or PC with Volumio's innovative software. First things first, Here is Armbian Distro, We talk about Debian and Arm things, So, for better support i think you can take the Volumio Forum as Base to Build your image, https://community.volumio.com/t/sound-quality-running-volumio-3-on-different-hw-devices/61059 By the Armbian Side, Volumio is debian based, You can bring the Root image from Volumio distro and apply the BootLoader from @hzdm v0.8 method. Follow this Guide it's based on original guide

From my experience with TV boxes, If you keep USB3.0 on max speed for a time longer the 30 seconds, probably you will experience a data loss somewhere.

https://youtu.be/1vpepaQ-VQQ?si=zDM2XXD7xPOaP-JK

I bought 4, and have 4, never have any trouble with this Chinese crap, it's very powerful, but I recognize trash when I see trash, don't let your files on emmc without backup, and don't trust a full time service on that RAM, also don't trust external SSD devices on that power supply Sent from my 22021211RC using Tapatalk

You can throw it on trash easyer than a umbrel device or raspiblitz.

Stop saying the truth. [emoji28] Sent from my 22021211RC using Tapatalk

F

send the device to armbian, they will use it to something.

Please, dont, some children have worked on it. Step 1: You Just need to short the clk and gnd from MMC while connect the device on USB - Male to Male use linux! flash the loader with rkdeveloptool