RaptorSDS

i done this with new image but no luck its maybe like this problem https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/267891 i have also "ifup wlan0" like 20 time dhcp discovery 255.255.255.255 and than close you mean find gpio pins ?

also thank you for add led but i use the dtb for my running rom but still no led trigger at sys/class/leds , did i need a modul or something more ?

no lsmod show 8723bs is the modul for my wlan i change ( nano /etc/modules) from dhd to 8723bs and change (nano /etc/modprobe.d/blacklist.conf) insert blacklist dhd than my wifi work

i have use m8s.dtb , n200_2gb.dtb and the one from the my backup .all with same result . my steps i have flash sdcard change modules to 8723bs and blacklist in modprobe.d dhd change interfaces set lan to static and wlan to hotlpug and dhcp than iwlist for wlan ( find my one ) check ntp is running iwconfig setup my ssid and key iwconfig ( check of wlan connection) and than dhclient (but dont do anything , have to ctrl+c ) test with wpa_supplicant but same result . do you have a changelog of the new image 3.10.99

i test today but i have problems to optain a ip addr from dhclient , i connect to my wlan ( iwconfig told me all fine) than i start dhclient and nothing ( i start and restart ntp deamon but this time no effect) .

Led dts for the 3.10.99 ,that would be nice thanks

i test your kernel , m8s.dtb , work i can log in start time about 2-3min but 2 error first at usb only my printer show not the canon scanner at the other usb port , second at shutdown the blue led still on dont switch to red Kernel test 4.11 from 15.05 m8s.dtb .log

i add this lines to my dts file pwmleds { compatible = "pwm-leds"; power { label = "m8s:blue:power"; pwms = <pwm_ef 1 7812500 0>; max-brightness = <255>; active-low; linux,default-trigger = "default-on"; }; }; pwm_ef { status = "okay"; pinctrl-0 = <pwm_e_pins>, <pwm_f_ao_pins>; pinctrl-names = "default"; clocks = <clkc CLKID_FCLK_DIV3>, <clkc CLKID_FCLK_DIV4>; clock-names = "clkin0", "clkin1"; }; but i got still sytax error in the DTC please can you add the led funktion to the meason8s2 n200.dtb for me ? m8s.dtb m8s.dts

But is the m8s+ a S9xx chip ? Or still a S8xx ( maybe 805 but than he has the wrong image S802 /812 )

i found leds at /sys/class and backlight but there are no parameters or triggers i am still on 3.xx kernel , but i am new to linux

like i wrote befor my box Akimso M8s S812 ( label as m812+) 2GB RAM 8GB ROM RTL8723BS WIFI/Bluetooth HDMI SPdif AV(4pin) IR-Remote i know its a clone ( only 19€ at amazon)

Also i notice that your m8s dtb had only 12kb the old n200dtb 22kb

can you please descripte how to controll LED ?

i take a new SD Card i got follow error random stop at PWM Blue LED some SD Card read error or maybe image problem GPIO 32 error log file att. "your MEGA.co Link is password protectt" kernel test 4.11 m8s dtb 2 .log kernel test 4.11 m8s dtb.log

yandex have only 43kb/s , i download file during night , i will test tomorrow evening

ok another reflash of sd card and dhcp client work , this time NTP start befor dhclient and run fine , now wlan internet work.!!!!

thank you , after a long day and complet new flash of sdcard i got bcm unload and realtek load ( problem was a misspelling blacklist.conf) , now i stuck at next problem dhcp (dhclient) dont work. dhcp run 5 min than stop without any ip .

thank you ubuntu works how i can disable download ? , i could set up eth0 and ssh , i have a wlan0 adapter but it dont find any signal ( maybe its possible to integrate the RTL8723BS driver from the S9xx (mini M8s) rom to the S812 rom )

i make some UART log files for my rom problems https://drive.google.com/drive/folders/0B_XvIiyAvIIlcHEwY19PZjIwVDA?usp=sharing

hello @balbes150 thanks for your work my box Akimso M8s S812+ 2GB RAM 8GB ROM RTL8723BS WIFI my problem the multiboot script run fine i boot from USB and SD card fine i have UART USB adapter i have android 4.4 root i have try many dtb and S8x jessy xfc and server rom and s9x jessy server rom all boot all boot the rom but than i got stuck with some dtb i got till hdmitx cec: wait for cec not ready or i got till GPIO 32 error irq in used and than a loop of starting and closing the CPU1 and 2 and the GPIO 32 and the IRQ please help i am windows user and only the beginning of linux