Search the Community

Here's the results from dmesg: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.14.14-cubox-i (root@kitchen) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #8 SMP Sun Jul 12 19:03:09 CEST 2015 [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: SolidRun HummingBoard Dual/Quad [ 0.000000] cma: CMA: reserved 256 MiB at 40000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat 80a68280, node_mem_map af779000 [ 0.000000] DMA zone: 2048 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 262144 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 8 pages/cpu @af758000 s9664 r8192 d14912 u32768 [ 0.000000] pcpu-alloc: s9664 r8192 d14912 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 [ 0.000000] Kernel command line: root=/dev/mmcblk0p1 rootfstype=ext4 rootwait console=tty1 video=mxcfb0:dev=hdmi,1280x720M@60,if=RGB24,bpp=32 rd.dm=0 rd.luks=0 rd.lvm=0 raid=noautodetect pci=nomsi ahci_imx.hotplug=1 consoleblank=0 vt.global_cursor_default=0 loglevel=9 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] allocated 2097152 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 763540K/1048576K available (7306K kernel code, 352K rwdata, 2632K rodata, 337K init, 518K bss, 285036K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xc0800000 - 0xff000000 (1000 MB) [ 0.000000] lowmem : 0x80000000 - 0xc0000000 (1024 MB) [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB) [ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB) [ 0.000000] .text : 0x80008000 - 0x809bcd9c (9940 kB) [ 0.000000] .init : 0x809bd000 - 0x80a115c0 ( 338 kB) [ 0.000000] .data : 0x80a12000 - 0x80a6a0e0 ( 353 kB) [ 0.000000] .bss : 0x80a6a0e8 - 0x80aebaa0 ( 519 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] L2C-310 erratum 769419 enabled [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9 [ 0.000000] L2C-310 ID prefetch enabled, offset 4 lines [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76070001 [ 0.000010] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns [ 0.000580] Console: colour dummy device 80x30 [ 0.001037] console [tty1] enabled [ 0.001063] Calibrating delay loop... 1570.81 BogoMIPS (lpj=785408) [ 0.007310] pid_max: default: 32768 minimum: 301 [ 0.007438] Security Framework initialized [ 0.007512] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.007532] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.012527] Initializing cgroup subsys memory [ 0.012559] Initializing cgroup subsys devices [ 0.012574] Initializing cgroup subsys freezer [ 0.012589] Initializing cgroup subsys net_cls [ 0.012602] Initializing cgroup subsys blkio [ 0.012615] Initializing cgroup subsys bfqio [ 0.012628] Initializing cgroup subsys perf_event [ 0.012701] CPU: Testing write buffer coherency: ok [ 0.012940] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.013006] Setting up static identity map for 0x106f1890 - 0x106f18e8 [ 0.014656] CPU1: Booted secondary processor [ 0.021304] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.021421] Brought up 2 CPUs [ 0.021457] SMP: Total of 2 processors activated. [ 0.021470] CPU: All CPU(s) started in SVC mode. [ 0.022040] devtmpfs: initialized [ 0.025545] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.039790] atomic64 test passed [ 0.039829] pinctrl core: initialized pinctrl subsystem [ 0.040197] regulator-dummy: no parameters [ 0.040559] NET: Registered protocol family 16 [ 0.048382] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.048899] cpuidle: using governor ladder [ 0.048916] cpuidle: using governor menu [ 0.049189] CPU identified as i.MX6Q, silicon rev 1.2 [ 0.049287] Use WDOG1 as reset source [ 0.057197] syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered [ 0.057473] vdd1p1: 800 <--> 1375 mV at 1125 mV [ 0.057810] vdd3p0: 2800 <--> 3150 mV at 3000 mV [ 0.058098] vdd2p5: 2000 <--> 2750 mV at 2425 mV [ 0.060329] vddarm: 725 <--> 1450 mV at 1150 mV [ 0.060627] vddpu: 725 <--> 1450 mV at 1150 mV [ 0.061323] vddsoc: 725 <--> 1450 mV at 1200 mV [ 0.062901] syscon 20e0000.iomuxc-gpr: regmap [mem 0x020e0000-0x020e0037] registered [ 0.065294] syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered [ 0.068974] No ATAGs? [ 0.069004] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.069030] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.069615] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver [ 0.083571] bio: create slab <bio-0> at 0 [ 0.085735] mxs-dma 110000.dma-apbh: initialized [ 0.086401] brcm_osc_reg: 3300 mV [ 0.086652] brcm_reg: 3300 mV [ 0.086853] 3P3V: 3300 mV [ 0.087118] usb_h1_vbus: 5000 mV [ 0.087372] usb_otg_vbus: 5000 mV [ 0.087662] vgaarb: loaded [ 0.088369] SCSI subsystem initialized [ 0.088552] libata version 3.00 loaded. [ 0.088818] usbcore: registered new interface driver usbfs [ 0.088896] usbcore: registered new interface driver hub [ 0.089000] usbcore: registered new device driver usb [ 0.089134] usbphy_nop1.11 supply vcc not found, using dummy regulator [ 0.089232] usbphy_nop2.12 supply vcc not found, using dummy regulator [ 0.090687] i2c i2c-0: IMX I2C adapter registered [ 0.091254] i2c i2c-1: IMX I2C adapter registered [ 0.091514] i2c i2c-2: IMX I2C adapter registered [ 0.091628] media: Linux media interface: v0.10 [ 0.091693] Linux video capture interface: v2.00 [ 0.091771] pps_core: LinuxPPS API ver. 1 registered [ 0.091785] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.091818] PTP clock support registered [ 0.094376] imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7) [ 0.096372] imx-ipuv3 2800000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7) [ 0.097067] MIPI CSI2 driver module loaded [ 0.097154] Advanced Linux Sound Architecture Driver Initialized. [ 0.098069] NetLabel: Initializing [ 0.098085] NetLabel: domain hash size = 128 [ 0.098098] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.098158] NetLabel: unlabeled traffic allowed by default [ 0.098514] Switched to clocksource mxc_timer1 [ 0.223148] PCI host bridge to bus 0000:00 [ 0.223176] pci_bus 0000:00: root bus resource [io 0x1000-0x10000] [ 0.223195] pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff] [ 0.223216] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.223265] pci 0000:00:00.0: [16c3:abcd] type 01 class 0x060400 [ 0.223299] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 0.223328] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref] [ 0.223391] pci 0000:00:00.0: supports D1 [ 0.223410] pci 0000:00:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.223689] PCI: bus0: Fast back to back transfers disabled [ 0.223891] pci 0000:01:00.0: [11c1:5901] type 00 class 0x0c0010 [ 0.223966] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 0.224254] pci 0000:01:00.0: supports D1 D2 [ 0.224273] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.226583] PCI: bus1: Fast back to back transfers disabled [ 0.226609] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 0.226635] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01 [ 0.226697] pci 0000:00:00.0: BAR 0: assigned [mem 0x01000000-0x010fffff] [ 0.226722] pci 0000:00:00.0: BAR 14: assigned [mem 0x01100000-0x011fffff] [ 0.226742] pci 0000:00:00.0: BAR 6: assigned [mem 0x01200000-0x0120ffff pref] [ 0.226766] pci 0000:01:00.0: BAR 0: assigned [mem 0x01100000-0x01100fff 64bit] [ 0.226819] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.226839] pci 0000:00:00.0: bridge window [mem 0x01100000-0x011fffff] [ 0.226867] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.226885] pci 0000:00:00.0: bridge window [mem 0x01100000-0x011fffff] [ 0.226909] pci_bus 0000:00: resource 4 [io 0x1000-0x10000] [ 0.226926] pci_bus 0000:00: resource 5 [mem 0x01000000-0x01efffff] [ 0.226943] pci_bus 0000:01: resource 1 [mem 0x01100000-0x011fffff] [ 0.237007] NET: Registered protocol family 2 [ 0.237680] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.237771] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.237901] TCP: Hash tables configured (established 8192 bind 8192) [ 0.237976] TCP: reno registered [ 0.237996] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.238047] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.238340] NET: Registered protocol family 1 [ 0.238676] RPC: Registered named UNIX socket transport module. [ 0.238695] RPC: Registered udp transport module. [ 0.238707] RPC: Registered tcp transport module. [ 0.238719] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.238755] PCI: CLS 64 bytes, default 64 [ 0.239373] hw perfevents: enabled with ARMv7_Cortex_A9 PMU driver, 7 counters available [ 0.240768] pureg-dummy: no parameters [ 0.241734] imx6_busfreq busfreq.14: DDR medium rate not supported. [ 0.242272] Bus freq driver module loaded [ 0.242998] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.243213] audit: initializing netlink subsys (disabled) [ 0.243262] audit: type=2000 audit(0.242:1): initialized [ 0.412809] zbud: loaded [ 0.413351] VFS: Disk quotas dquot_6.5.2 [ 0.413643] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.415752] NFS: Registering the id_resolver key type [ 0.415795] Key type id_resolver registered [ 0.415810] Key type id_legacy registered [ 0.415833] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.416052] fuse init (API version 7.22) [ 0.416477] msgmni has been set to 2003 [ 0.416780] Key type big_key registered [ 0.427272] alg: No test for stdrng (krng) [ 0.427489] NET: Registered protocol family 38 [ 0.427595] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.427730] io scheduler noop registered [ 0.427747] io scheduler deadline registered [ 0.427930] io scheduler cfq registered [ 0.427975] io scheduler bfq registered (default) [ 0.427989] BFQ I/O-scheduler version: v7r5 [ 0.429279] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt [ 0.429308] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 0.429331] pcie_pme 0000:00:00.0:pcie01: service driver pcie_pme loaded [ 0.430574] mxc_sdc_fb fb.27: register mxc display driver hdmi [ 0.430751] mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller 0x13:0xa:0xa0:0xc1 [ 0.430784] fbcvt: 1280x720@60: CVT Name - .921M9 [ 0.450583] imx-ipuv3 2400000.ipu: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7) [ 0.506087] Console: switching to colour frame buffer device 160x45 [ 0.541278] imx-sdma 20ec000.sdma: no iram assigned, using external mem [ 0.542058] imx-sdma 20ec000.sdma: loaded firmware 1.1 [ 0.544752] imx-sdma 20ec000.sdma: initialized [ 0.545238] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.546578] Serial: IMX driver [ 0.546928] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58, base_baud = 5000000) is a IMX [ 0.547865] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 61, base_baud = 5000000) is a IMX [ 0.548387] serial: Freescale lpuart driver [ 0.549659] [drm] Initialized drm 1.1.0 20060810 [ 0.550095] [drm] Initialized vivante 1.0.0 20120216 on minor 0 [ 0.560970] brd: module loaded [ 0.565619] loop: module loaded [ 0.570933] ahci-imx 2200000.sata: fsl,transmit-level-mV value 1104, using 00000044 [ 0.575591] ahci-imx 2200000.sata: fsl,transmit-boost-mdB value 0, using 00000000 [ 0.580169] ahci-imx 2200000.sata: fsl,transmit-atten-16ths value 9, using 00002000 [ 0.584734] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000 [ 0.592111] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled [ 0.596706] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 0.601323] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst [ 0.607302] scsi0 : ahci_platform [ 0.612244] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 71 [ 0.618786] spi_imx 200c000.ecspi: probed [ 0.624258] libphy: Fixed MDIO Bus: probed [ 0.629748] 2188000.ethernet supply phy not found, using dummy regulator [ 0.641286] libphy: fec_enet_mii_bus: probed [ 0.646596] fec 2188000.ethernet eth0: registered PHC device 0 [ 0.651910] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.656936] ehci-pci: EHCI PCI platform driver [ 0.662056] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.667194] ohci-pci: OHCI PCI platform driver [ 0.672297] uhci_hcd: USB Universal Host Controller Interface driver [ 0.677604] usbcore: registered new interface driver usb-storage [ 0.682748] usbcore: registered new interface driver ums-usbat [ 0.687847] usbcore: registered new interface driver usbserial [ 0.692763] usbcore: registered new interface driver usbserial_generic [ 0.697553] usbserial: USB Serial support registered for generic [ 0.702824] 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator [ 0.711833] ci_hdrc ci_hdrc.0: EHCI Host Controller [ 0.716785] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1 [ 0.727546] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00 [ 0.732374] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.737149] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.741971] usb usb1: Product: EHCI Host Controller [ 0.746738] usb usb1: Manufacturer: Linux 3.14.14-cubox-i ehci_hcd [ 0.751536] usb usb1: SerialNumber: ci_hdrc.0 [ 0.756831] hub 1-0:1.0: USB hub found [ 0.761609] hub 1-0:1.0: 1 port detected [ 0.769863] ci_hdrc ci_hdrc.1: doesn't support gadget [ 0.774521] ci_hdrc ci_hdrc.1: EHCI Host Controller [ 0.779307] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2 [ 0.789543] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00 [ 0.794352] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.799033] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.803742] usb usb2: Product: EHCI Host Controller [ 0.808443] usb usb2: Manufacturer: Linux 3.14.14-cubox-i ehci_hcd [ 0.813204] usb usb2: SerialNumber: ci_hdrc.1 [ 0.818404] hub 2-0:1.0: USB hub found [ 0.823084] hub 2-0:1.0: 1 port detected [ 0.828318] mousedev: PS/2 mouse device common for all mice [ 0.838015] rtc-pcf8523 0-0068: rtc core: registered rtc-pcf8523 as rtc0 [ 0.842979] snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc1 [ 0.847635] i2c /dev entries driver [ 0.853164] imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0) [ 0.858217] device-mapper: uevent: version 1.0.3 [ 0.863122] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 0.868160] sdhci: Secure Digital Host Controller Interface driver [ 0.872913] sdhci: Copyright© Pierre Ossman [ 0.877597] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.883038] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 0.889106] mmc0: no vqmmc regulator found [ 0.923551] ata1: SATA link down (SStatus 0 SControl 300) [ 1.129573] usb 2-1: new high-speed USB device number 2 using ci_hdrc [ 1.166545] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 1.175190] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.180676] mmc1: no vqmmc regulator found [ 1.188533] 2194000.usdhc supply card-external-vcc not found, using dummy regulator [ 1.250383] usb 2-1: New USB device found, idVendor=04b4, idProduct=6570 [ 1.255722] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.261055] usb 2-1: Product: USB2.0 Hub [ 1.267171] hub 2-1:1.0: USB hub found [ 1.267541] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.278146] hub 2-1:1.0: 4 ports detected [ 1.555562] usb 2-1.1: new full-speed USB device number 3 using ci_hdrc [ 1.657858] Galcore version 4.6.9.9754 [ 1.663546] usb 2-1.1: New USB device found, idVendor=413c, idProduct=1002 [ 1.671307] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.686256] usb 2-1.1: Product: Dell USB Keyboard Hub [ 1.692142] usb 2-1.1: Manufacturer: Dell [ 1.698306] mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed [ 1.704488] mxc_asrc 2034000.asrc: mxc_asrc registered [ 1.707370] hub 2-1.1:1.0: USB hub found [ 1.707527] hub 2-1.1:1.0: 3 ports detected [ 1.717508] mxc_hdmi 20e0000.hdmi_video: mxc_hdmi_read_edid HDMI in DVI mode [ 1.727352] mxc_vpu 2040000.vpu: VPU initialized [ 1.727942] mxc_hdmi_cec hdmi_cec.16: HDMI CEC initialized [ 1.728328] hidraw: raw HID events driver © Jiri Kosina [ 1.728640] usbcore: registered new interface driver usbhid [ 1.728642] usbhid: USB HID core driver [ 1.731317] sgtl5000 0-000a: sgtl5000 revision 0x11 [ 1.784455] 0-000a: 1200 mV normal [ 1.784529] sgtl5000 0-000a: Using internal LDO instead of VDDD [ 1.786597] sgtl5000 0-000a: ldo_regulator_enable(): enabled 0 [ 1.804695] imx-sgtl5000 sound-sgtl5000.24: sgtl5000 <-> 2028000.ssi mapping ok [ 1.809700] imx-spdif sound-spdif.25: snd-soc-dummy-dai <-> 2004000.spdif mapping ok [ 1.827726] mmc1: host does not support reading read-only switch. assuming write-enable. [ 1.828094] imx-audio-hdmi sound-hdmi.26: hdmi-hifi <-> hdmi_audio.15 mapping ok [ 1.829805] ip_tables: © 2000-2006 Netfilter Core Team [ 1.829836] TCP: cubic registered [ 1.829840] Initializing XFRM netlink socket [ 1.830377] NET: Registered protocol family 10 [ 1.835765] mip6: Mobile IPv6 [ 1.835772] NET: Registered protocol family 17 [ 1.835838] Bridge firewalling registered [ 1.835881] 8021q: 802.1Q VLAN Support v1.8 [ 1.835927] Key type dns_resolver registered [ 1.837688] registered taskstats version 1 [ 1.837911] regulator-dummy: disabling [ 1.839666] mmc1: new high speed SDHC card at address aaaa [ 1.840818] rtc-pcf8523 0-0068: setting system clock to 2095-08-14 13:22:44 UTC (3964166564) [ 1.849442] ALSA device list: [ 1.849449] #0: On-board Codec [ 1.849452] #1: imx-spdif [ 1.849454] #2: imx-hdmi-soc [ 1.853587] mmcblk0: mmc1:aaaa SL16G 14.8 GiB [ 1.854973] mmcblk0: p1 [ 1.993739] imx-ipuv3 2400000.ipu: WARNING: adapt panel end blank lines [ 2.035769] usb 2-1.1.1: new full-speed USB device number 4 using ci_hdrc [ 2.094836] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) [ 2.111990] usb 2-1.1.1: New USB device found, idVendor=413c, idProduct=2002 [ 2.112146] usb 2-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.112305] usb 2-1.1.1: Product: Dell USB Keyboard Hub [ 2.112417] usb 2-1.1.1: Manufacturer: Dell [ 2.116049] input: Dell Dell USB Keyboard Hub as /devices/soc0/soc.1/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/0003:413C:2002.0001/input/input0 [ 2.116700] hid-generic 0003:413C:2002.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-ci_hdrc.1-1.1.1/input0 [ 2.117985] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) [ 2.118191] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 2.121065] input: Dell Dell USB Keyboard Hub as /devices/soc0/soc.1/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.1/0003:413C:2002.0002/input/input1 [ 2.121684] hid-generic 0003:413C:2002.0002: input,hidraw1: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-ci_hdrc.1-1.1.1/input1 [ 2.126008] devtmpfs: mounted [ 2.126284] Freeing unused kernel memory: 336K (809bd000 - 80a11000) [ 2.670972] random: nonblocking pool is initialized [ 3.046334] init: mounted-proc main process (132) terminated with status 1 [ 3.810697] systemd-udevd[232]: starting version 204 [ 3.967803] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 4.045017] lp: driver loaded but no devices found [ 4.061793] ppdev: user-space parallel port driver [ 4.659752] IR keymap rc-rc6-mce not found [ 4.659856] Registered IR keymap rc-empty [ 4.660471] input: gpio_ir_recv as /devices/soc0/ir-receiver.23/rc/rc0/input2 [ 4.660810] rc0: gpio_ir_recv as /devices/soc0/ir-receiver.23/rc/rc0 [ 4.675180] IR NEC protocol handler initialized [ 4.676724] IR RC5(x) protocol handler initialized [ 4.721156] IR RC6 protocol handler initialized [ 4.722215] IR Sony protocol handler initialized [ 4.722984] IR SANYO protocol handler initialized [ 4.724006] IR MCE Keyboard/mouse protocol handler initialized [ 4.724805] IR JVC protocol handler initialized [ 4.729617] lirc_dev: IR Remote Control driver registered, major 240 [ 4.730339] input: MCE IR Keyboard/Mouse (gpio-rc-recv) as /devices/virtual/input/input3 [ 4.730763] PCI: enabling device 0000:01:00.0 (0140 -> 0142) [ 4.732673] rc rc0: lirc_dev: driver ir-lirc-codec (gpio-rc-recv) registered at minor = 0 [ 4.732684] IR LIRC bridge handler initialized [ 4.785935] firewire_ohci 0000:01:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0, physUB [ 5.224634] EXT4-fs (mmcblk0p1): re-mounted. Opts: data=writeback,commit=600,errors=remount-ro [ 5.277473] mxc_hdmi 20e0000.hdmi_video: mxc_hdmi_read_edid HDMI in DVI mode [ 5.277489] mxc_hdmi 20e0000.hdmi_video: same edid [ 5.303177] firewire_core 0000:01:00.0: created device fw0: GUID 1111110000000521, S800 [ 5.880134] Adding 262140k swap on /var/swap. Priority:-1 extents:2 across:286716k SSFS [ 6.325379] mxc_hdmi 20e0000.hdmi_video: mxc_hdmi_read_edid HDMI in DVI mode [ 6.325395] mxc_hdmi 20e0000.hdmi_video: same edid [ 7.497435] init: cups main process (564) killed by HUP signal [ 7.497485] init: cups main process ended, respawning [ 7.595405] Bluetooth: Core ver 2.18 [ 7.595489] NET: Registered protocol family 31 [ 7.595497] Bluetooth: HCI device and connection manager initialized [ 7.595572] Bluetooth: HCI socket layer initialized [ 7.595976] Bluetooth: L2CAP socket layer initialized [ 7.596023] Bluetooth: SCO socket layer initialized [ 7.614717] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.614729] Bluetooth: BNEP filters: protocol multicast [ 7.614756] Bluetooth: BNEP socket layer initialized [ 7.708141] Bluetooth: RFCOMM TTY layer initialized [ 7.708185] Bluetooth: RFCOMM socket layer initialized [ 7.708207] Bluetooth: RFCOMM ver 1.11 [ 127.798001] init: alsa-restore main process (938) terminated with status 99

I used the default driver implementation - check what an how it works: http://linux-sunxi.org/Cedrus It's not user friendly but hacker friendly Playing of video is normal. In window or full screen. HDMI audio is possible to achieve. http://linux-sunxi.org/Audio_Codec

Here is a thread regarding VoIP clients on Banana Pi and this is the output of "apt-cache show linphone-nogtk" running Armbian Wheezy: Package: linphone-nogtk Source: linphone Version: 3.5.2-10 Installed-Size: 125 Maintainer: Debian VoIP Team <pkg-voip-maintainers@lists.alioth.debian.org> Architecture: armhf Depends: libc6 (>= 2.13-28), liblinphone4 (>= 3.5.2), libmediastreamer1 (>= 3.5.2), libncurses5 (>= 5.5-5~), libortp8 (>= 3.5.2), libosip2-7, libreadline6 (>= 6.0), libspeex1 (>= 1.2~beta3-1), libtinfo5, libx11-6, linphone-common (= 3.5.2-10), host Description-en: SIP softphone - console-only client Linphone is an audio and video internet phone using the SIP protocol. It has a GTK+ and console interface, includes a large variety of audio and video codecs, and provides IM features. . This package contains the console version of linphone, which saves space as it doesn't link to the gtk libraries. It does however still link to libx11 for video support. . Console Tools: . . linphonec is a command line interface that can use readline on Linux to get completion, history, such as bash. . linphonecsh is another command line tool to remotely control a linphonec daemon. Unlike linphonec, linphonecsh immediately exits once the command is executed. Homepage: http://www.linphone.org/ Description-md5: ea9dc85daac50c5af653e397210d4f6b Tag: uitoolkit::ncurses Section: sound Priority: optional Filename: pool/main/l/linphone/linphone-nogtk_3.5.2-10_armhf.deb Size: 50982 MD5sum: 968a6c149225e059c406aa0dd82f8beb SHA1: 86e3fa464b6e820b877f996789a6e5c755b72d9c SHA256: 44ee11f2fb6a3ced5d8cb103a1da05575e9a1b5228107efc5efbbdb518e4e938

Dear Igor, please, can You explain me step-by-step (because I'm a noob) how can I make usable with Orange Pi mini your Desktop Trusty image (Kernel 3.4.108 with HW accelerated video playback)? When I just boot image, I have dead USB, even OTG, when I try to do according your recommendation (maybe I do it wrong), I have nothing.

Ubuntu because I haven't build others yet. If this is working Debian will work too. ... and latest changes around video within kernel has nothing to do with this. If you don't get a picture at boot time, this is the problem of u-boot or something that we don't know yet. BTW. Do you have something plugged into USB? Unplug and boot.

Hello, sorry for my very bad english. I have installd the desktopimage for the bananapi m1. It works. But same programms does work because the autmatic login user is root. So exaile, chromium-browser does start. Synatipc starts from the gui after starting the AT-bus programm (see menu starting programms) Tunar needs to install the gvfs-backend, then you can see the computers in the network. To change the language in the gui you need to install the language-pack-de (for german). I have also a cubitruck and thin this problems also in the image for the cubietruck. The first problems can solved when the automic user is not root. The other when the packeges are in the images. Also the is the near the best images for the bananpi. Mr. Pecovnik, you made a very good job. greetings Milo PS: I have no Creditcard and no Paypal, how can i otherwise donate?

Hi papasmurfster, on my system I could see the usb devices in lsusb and dmesg command outputs (lsusb found the stick as "ID 2013:025f PCTV Systems"). If you can't see the USB stick there, i'm afraid i cannot help you. If the stick shows up there, dmesg should output something like: usb 2-1: New USB device found, idVendor=2013, idProduct=025f usb 2-1: Product: PCTV 292e usb 2-1: Manufacturer PCTV usb 2-1: SerialNumber *somenumber* this is standard USB device output and also showed up with no working driver. It shows the USB stick is recognized even if no driver is present. In the compile.sh script i changed the line KERNEL_CONFIGURE="no" to KERNEL_CONFIGURE="yes". According to your answer you already did this, i just mention it to reproduce all the needed steps After starting the script, at some point the kernel menuconfig will pop up. Here I selected the following options: Device Drivers --> I2C-Support --> I2C bus multiplexing support <*> Device Drivers --> I2C-Support --> Multiplexer I2C Chip Support: All 3 options to <*> Device Drivers --> Multimedia Support --> Analog TV support [*] Device Drivers --> Multimedia Support --> Digital TV support [*] Device Drivers --> Multimedia Support --> AM/FM radio receivers/transmitters support [*] Device Drivers --> Multimedia Support --> DVB Network support [*] Device Drivers --> Multimedia Support --> Media USB Adapters [*] Device Drivers --> Multimedia Support --> Media USB Adapters --> Support for various USB DVB devices v2 <*>, all sub options as module <m> except DVBSky USB support <*> Device Drivers --> Multimedia Support --> Media USB Adapters --> Empia EM28xx USB devices support <*> Device Drivers --> Multimedia Support --> Media USB Adapters --> Empia EM28xx analog TV, Video capture and/or webcam support <*> Device Drivers --> Multimedia Support --> Media USB Adapters --> Empia EM28xx ALSA audio module <M> Device Drivers --> Multimedia Support --> Media USB Adapters --> DVB/ATSC Support for em28xx based TV cards <*> Device Drivers --> Multimedia Support --> Media USB Adapters --> Autoselect ancillary drivers (tubers, sensors, i2c, frontends) [*] I think these options are be everything I changed. After that, the dmesg output shows additional lines when plugging in the stick: [ 4.577201] em28178 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x8f0cf804 [ 4.577222] em28178 #0: EEPROM info: [ 4.577230] em28178 #0: microcode start address = 0x0004, boot configuration = 0x01 [ 4.585684] em28178 #0: AC97 audio (5 sample rates) [ 4.585711] em28178 #0: 500mA max power [ 4.585721] em28178 #0: Table at offset 0x27, strings=0x146a, 0x1888, 0x0a7e [ 4.586268] em28178 #0: Identified as PCTV tripleStick (292e) (card=94) [ 4.586291] em28178 #0: dvb set to isoc mode. [ 4.586614] em28178 #0: Binding DVB extension [ 4.643405] i2c i2c-4: Added multiplexed i2c bus 5 [ 4.643434] si2168 4-0064: Silicon Labs Si2168 successfully attached [ 4.658171] si2157 5-0060: Silicon Labs Si2147/2148/2157/2158 successfully attached [ 4.658246] DVB: registering new adapter (em28178 #0) [ 4.658270] usb 2-1: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)... [ 4.660198] em28178 #0: DVB extension successfully initialized and after downloading the firmware like mentioned in the starting thread, dmesg also shows: [ 23.848889] si2168 4-0064: found a 'Silicon Labs Si2168-B40' [ 23.849973] si2168 4-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' [ 24.142642] si2168 4-0064: firmware version: 4.0.4 [ 24.148767] si2157 5-0060: found a 'Silicon Labs Si2157-A30' [ 24.198515] si2157 5-0060: firmware version: 3.0.5 and now it should work. Another problem with the stick: It does not start correctly on system boot, i have to unplug and replug it after booting to get it to work. I hope to find a script to "unplug" and "replug" it via console. Regards Markus

Just a small follow-up: To get an idea what's going on inside enclosures I added one DS1820 externally to get ambient temperature and one DHT11 inside the server's enclosure close to the PSU (took me some time to patch the programm to read out the DHT11 without a pull-up resistor and to realize that it's not enough to add w1-gpio and w1_therm to /etc/modules when w1_sunxi is missing to be able to talk to the DS1820). Since the device is some sort of a surveillance server (feeds 5 RPi B+ with camera module via PoE and both records their video streams and 'transcodes' to be accessible in realtime via VLC) I also added the ability to record the internal temperature of all 5 PiSpy cams: RPi-Monitor is really great to realize obvious relationships otherwise invisible :-)

the A20 video features are only working good via sunxi-vdpau and mplayer or vdr with softhd-device VDR can play streams with the iptv-plugin

it worked for no reason, i unplugged it many times, restarted cubietruck and suddenly it worked. Now i have many other problems like no hdmi sound, impossible video play and so on, but thats another topic^^ this can be closed

Sorry Igor, but I get almost the same error if I try v3.19.8 as if I try v3.19 (without the trailing zero) I tried to delete the lib folder as well, but it not helps. root@avlaptop:~# ./compile.sh Already up-to-date. [ ok ] Building Bananapi Ubuntu 3.2 trusty next [ ok ] Syncing clock [ ok ] Downloading u-boot Already up-to-date. [ ok ] Downloading linux-mainline Already up-to-date. [ ok ] Downloading sunxi-tools Already up-to-date. [ ok ] Downloading rt8192cu Already up-to-date. [ ok ] Downloading sunxi-display-changer Already up-to-date. [ ok ] Compiling sunxi tools [ ok ] Patching kernel v3.19.8 patching file arch/arm/boot/dts/sun7i-a20-cubietruck.dts Hunk #1 FAILED at 71. 1 out of 1 hunk FAILED -- saving rejects to file arch/arm/boot/dts/sun7i-a20-cubietruck.dts.rej can't find file to patch at input line 31 Perhaps you used the wrong -p or --strip option? The text leading up to this was: -------------------------- |--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts |+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts -------------------------- File to patch: If you have a little time for this, could you check it please? Here is the used compile.sh. I'd like to say thank you again, for taking the time to make these images, and helping for beginners like me. #!/bin/bash # # Edit and execute this script - Ubuntu 14.04 x86/64 recommended # # Check https://github.com/igorpecovnik/lib for possible updates # # method KERNEL_ONLY="no" # build kernel only SOURCE_COMPILE="yes" # force source compilation KERNEL_CONFIGURE="yes" # change default configuration KERNEL_CLEAN="yes" # MAKE clean before compilation USEALLCORES="yes" # Use all CPU cores BUILD_DESKTOP="no" # desktop with hw acceleration for some boards # user DEST_LANG="en_US.UTF-8" # sl_SI.UTF-8, en_US.UTF-8 CONSOLE_CHAR="UTF-8" # console charset TZDATA="Europe/Budapest" # time zone ROOTPWD="1234" # forced to change @first login SDSIZE="3000" # SD image size in MB AFTERINSTALL="" # command before closing image MAINTAINER="Igor Pecovnik" # deb signature MAINTAINERMAIL="igor.pecovnik@****l.com" # deb signature GPG_PASS="" # set GPG password for non-interactive packing # advanced KERNELTAG="v3.19.8" # kernel TAG - valid only for mainline UBOOTTAG="v2015.07" # kernel TAG - valid for all sunxi FBTFT="yes" # https://github.com/notro/fbtft EXTERNAL="yes" # compile extra drivers FORCE="yes" # ignore manual changes to source # source is where we start the script SRC=$(pwd) # destination DEST=$(pwd)/output # get updates of the main build libraries if [ -d "$SRC/lib" ]; then cd $SRC/lib git pull else # download SDK apt-get -y -qq install git git clone https://github.com/igorpecovnik/lib fi source $SRC/lib/main.sh

Hi After reading this: "No audio driver, IR, NAND, BT, HW video, I2C and SPI untested on 4.0 or higher​" i'm not sure which kernel version should i choose. Is that "no audio driver" means that there is no HDMI audio, or no any audio including jack audio? Both kernels support the "Allwinner Security System cryptographic accelerator"? As i'm using CB2 as a headless java application server, samba fileserver, dlna server and music player daemon server, i need only jack audio from these, and of course the hw cryptographic support.

Hello Imagox, Did you succeed in creating a build with Toshiba driver? I want to do the same as you, so as I can capture HDMI video with a HummingBoard. Please, let me know if you had any progress. Regards,

I think the problem is kernel loading address. Check this (working) boot script: setenv bootargs root=/dev/mmcblk0p1 rootfstype=ext4 rootwait console=tty1 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=32 rd.dm=0 rd.luks=0 rd.lvm=0 raid=noautodetect pci=nomsi ahci_imx.hotplug=1 consoleblank=0 vt.global_cursor_default=0 quiet ext2load mmc 0 0x18000000 /boot/dtb/${fdt_file} ext2load mmc 0 0x12000000 /boot/zImage bootz 0x12000000 - 0x18000000 Forget about converting. I think it needs to be zImage.

Thank you so much Igor! This solved my problems! Originally I was following the instructions here to get my image using another Linux machine. So I compiled the kernel and uboot image, then followed the instructions at the bottom to flash them into my SD card. However, the instructions seem to work only for uImage, but I got a zImage from compiling the 3.14 kernel, so I changed the first line of uEnv.txt to "bootfile=/boot/zImage", but that gave me a "Wrong Image Format for bootm command" when I tried it on hummingboard. I then did the following in uboot: setenv bootargs 'console=ttymxc0,115200 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=32' ext2load mmc 0:1 0x10800000 /boot/zImage bootz 0x10800000 But my screen just went black after the bootz command. I then tried converting the zImage to uImage by typing the following: mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 -n "Linux kernel" -d arch/arm/boot/zImage uImage I tried to boot off that uImage and it gave me a black screen again. What am I doing wrong here? PS: From the instructions I followed, I did not do anything for following line because I wasn't sure what to do: <copy the root filesystem and do any other modifications on the mounted partition> ,but I doubt that's the reason?

And remember to add this boot script: /boot/boot.cmd setenv bootargs root=/dev/mmcblk0p1 rootfstype=ext4 rootwait console=tty1 video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24,bpp=3 2 ahci_imx.hotplug=1 quiet ext2load mmc 0 0x18000000 /boot/dtb/imx6q-udoo.dtb ext2load mmc 0 0x12000000 /boot/zImage bootz 0x12000000 - 0x18000000 And convert it to the uboot format: mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr And of course adjust according to your conditions. This is for one partition SD card. If you have first FAT than some extra work is needed.

Hi Igor! I am sorry for so many questions, but I just can't seem to find the solution for my question. I need to activate (install) the Philips SAA7111/3/4/5 video decoders module, that is located in Device Drivers -> Multimedia Support -> Encoders, decoders, sensors and other helper chips . (when running menuconfig) Usually, this is done by downloading a new kernel, then running the menuconfig and going to Drivers/Multimedia Support and unselect "Autoselect ancillary drivers (tuners, sensors, i2c, frontends)" and a new list of "Encoders, decoders, sensors and other helper chips ." appears. And there i select Philips SAA7111/3/4/5 video decoders module by pressing Y. After this I save the .config and compile the kernel and install it and reboot. I tried this on banana pi and it compiled without errors but I could not boot it. The image of the kernel, in /boot folder somehow needed to be linked to the zImage, which I could not do (I have read about the u-boot and could not figure out how to use it) and ultimately I decided to install the new Debian Wheezy 4.1.2 from your website. In a previous post you told me that in order to upgrade kernel, I need to follow the instructions from https://github.com/igorpecovnik/lib/blob/next/documentation/general-faq.md#how-to-update-kernel I did that, and tried to install the same kernel, 4.1.2 but it offered me no way of configuring it. Because the whole point of compiling new kernel is to add the Philips SAA7111/3/4/5 video decoders module, that is present by default in the kernel but it is not included/activated by default. So how can I do this? How can activate the Philips SAA7111/3/4/5 video decoders module ? Thank you very much in advance and sorry for so many questions.

Here is my dmesg user1@bananapi:~$ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.3-bananapi (root@kitchen) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #2 SMP Tue Jul 28 10:03:20 CEST 2015 [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: LeMaker Banana Pi [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c09e9d00, node_mem_map eeef8000 [ 0.000000] Normal zone: 1710 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 194560 pages, LIFO batch:31 [ 0.000000] HighMem zone: 67584 pages, LIFO batch:15 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] PERCPU: Embedded 12 pages/cpu @eeec7000 s17472 r8192 d23488 u49152 [ 0.000000] pcpu-alloc: s17472 r8192 d23488 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260434 [ 0.000000] Kernel command line: console=tty1 root=/dev/mmcblk0p1 rootwait rootfstype=ext4 sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_no_mali_mem_reserve sunxi_fb_mem_reserve=16 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 1027888K/1048576K available (7582K kernel code, 290K rwdata, 1932K rodata, 316K init, 288K bss, 20688K reserved, 0K cma-reserved, 270336K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0952e34 (9516 kB) [ 0.000000] .init : 0xc0953000 - 0xc09a2000 ( 316 kB) [ 0.000000] .data : 0xc09a2000 - 0xc09eaa60 ( 291 kB) [ 0.000000] .bss : 0xc09ed000 - 0xc0a35094 ( 289 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000018] Switching to timer-based delay loop, resolution 41ns [ 0.000347] clocksource timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000510] clocksource hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 12741736309 ns [ 0.000705] Console: colour dummy device 80x30 [ 0.000842] console [tty1] enabled [ 0.000866] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.000881] pid_max: default: 32768 minimum: 301 [ 0.001006] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001018] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001726] Initializing cgroup subsys blkio [ 0.001754] Initializing cgroup subsys memory [ 0.001792] Initializing cgroup subsys devices [ 0.001806] Initializing cgroup subsys freezer [ 0.001821] Initializing cgroup subsys net_cls [ 0.001833] Initializing cgroup subsys perf_event [ 0.001858] CPU: Testing write buffer coherency: ok [ 0.002197] /cpus/cpu@0 missing clock-frequency property [ 0.002215] /cpus/cpu@1 missing clock-frequency property [ 0.002227] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.002289] Setting up static identity map for 0x400082c0 - 0x40008318 [ 0.004074] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.004162] Brought up 2 CPUs [ 0.004182] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.004190] CPU: All CPU(s) started in HYP mode. [ 0.004194] CPU: Virtualization extensions available. [ 0.004917] devtmpfs: initialized [ 0.012311] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 [ 0.012682] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.012987] xor: measuring software checksum speed [ 0.109981] arm4regs : 1261.600 MB/sec [ 0.210039] 8regs : 778.400 MB/sec [ 0.310101] 32regs : 799.200 MB/sec [ 0.310109] xor: using function: arm4regs (1261.600 MB/sec) [ 0.310246] pinctrl core: initialized pinctrl subsystem [ 0.311379] NET: Registered protocol family 16 [ 0.311971] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.340171] cpuidle: using governor ladder [ 0.364237] cpuidle: using governor menu [ 0.370344] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.370359] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.540480] raid6: int32x1 gen() 138 MB/s [ 0.710692] raid6: int32x1 xor() 111 MB/s [ 0.880863] raid6: int32x2 gen() 185 MB/s [ 1.051040] raid6: int32x2 xor() 120 MB/s [ 1.221161] raid6: int32x4 gen() 197 MB/s [ 1.391137] raid6: int32x4 xor() 122 MB/s [ 1.561410] raid6: int32x8 gen() 179 MB/s [ 1.731538] raid6: int32x8 xor() 116 MB/s [ 1.731546] raid6: using algorithm int32x4 gen() 197 MB/s [ 1.731553] raid6: .... xor() 122 MB/s, rmw enabled [ 1.731559] raid6: using intx1 recovery algorithm [ 1.731860] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 1.731908] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 1.732649] reg-fixed-voltage gmac-3v3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/gmac_power_pin@0, deferring probe [ 1.733176] SCSI subsystem initialized [ 1.733491] libata version 3.00 loaded. [ 1.733834] usbcore: registered new interface driver usbfs [ 1.733901] usbcore: registered new interface driver hub [ 1.733974] usbcore: registered new device driver usb [ 1.734108] Linux video capture interface: v2.00 [ 1.734193] pps_core: LinuxPPS API ver. 1 registered [ 1.734201] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.734228] PTP clock support registered [ 1.735811] cfg80211: Calling CRDA to update world regulatory domain [ 1.736383] Switched to clocksource arch_sys_counter [ 1.746866] NET: Registered protocol family 2 [ 1.747621] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.747713] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 1.747840] TCP: Hash tables configured (established 8192 bind 8192) [ 1.747930] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.747993] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.748309] NET: Registered protocol family 1 [ 1.748738] RPC: Registered named UNIX socket transport module. [ 1.748752] RPC: Registered udp transport module. [ 1.748759] RPC: Registered tcp transport module. [ 1.748765] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.749630] CPU PMU: Failed to parse /pmu/interrupt-affinity[0] [ 1.749686] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.750915] futex hash table entries: 512 (order: 3, 32768 bytes) [ 1.762151] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.763839] NFS: Registering the id_resolver key type [ 1.763909] Key type id_resolver registered [ 1.763916] Key type id_legacy registered [ 1.764664] Key type cifs.idmap registered [ 1.764963] fuse init (API version 7.23) [ 1.765828] JFS: nTxBlock = 8030, nTxLock = 64243 [ 1.775929] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 1.780116] bounce: pool size: 64 pages [ 1.780227] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.780391] io scheduler noop registered [ 1.780407] io scheduler deadline registered [ 1.780463] io scheduler cfq registered (default) [ 1.783521] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 1.842044] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.865413] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 41, base_baud = 1500000) is a U6_16550A [ 1.888841] 1c28c00.serial: ttyS1 at MMIO 0x1c28c00 (irq = 42, base_baud = 1500000) is a U6_16550A [ 1.912148] 1c29c00.serial: ttyS2 at MMIO 0x1c29c00 (irq = 43, base_baud = 1500000) is a U6_16550A [ 1.919406] loop: module loaded [ 1.920072] Loading iSCSI transport class v2.0-870. [ 1.986453] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 1.986506] ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan disabled [ 1.986539] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.986557] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc [ 1.987617] scsi host0: ahci-sunxi [ 1.988012] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 30 [ 1.989326] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 1.992001] tun: Universal TUN/TAP device driver, 1.6 [ 1.992016] tun: © 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 1.993216] PPP generic driver version 2.4.2 [ 1.993484] PPP BSD Compression module registered [ 1.993501] PPP Deflate Compression module registered [ 1.993528] PPP MPPE Compression module registered [ 1.993550] NET: Registered protocol family 24 [ 1.993601] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.993617] ehci-platform: EHCI generic platform driver [ 1.993969] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.994007] ohci-platform: OHCI generic platform driver [ 1.994373] usbcore: registered new interface driver usb-storage [ 1.994393] ftdi_elan: driver ftdi-elan [ 1.994858] usbcore: registered new interface driver ftdi-elan [ 1.995882] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0 [ 1.995899] sunxi-rtc 1c20d00.rtc: RTC enabled [ 1.996008] i2c /dev entries driver [ 1.997042] axp20x 0-0034: AXP20x variant AXP209 found [ 2.004592] input: axp20x-pek as /devices/platform/soc@01c00000/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0 [ 2.004768] axp20x-regulator axp20x-regulator: regulators node not found [ 2.007303] axp20x 0-0034: AXP20X driver loaded [ 2.008390] usbcore: registered new interface driver dvb_usb_dvbsky [ 2.009483] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 2.010180] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found [ 2.010629] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 2.046626] sunxi-mmc 1c0f000.mmc: base:0xf057a000 irq:27 [ 2.047424] ledtrig-cpu: registered to indicate activity on CPUs [ 2.047722] usbcore: registered new interface driver usbhid [ 2.047731] usbhid: USB HID core driver [ 2.048649] ipip: IPv4 over IPv4 tunneling driver [ 2.049520] Initializing XFRM netlink socket [ 2.050448] NET: Registered protocol family 10 [ 2.051923] NET: Registered protocol family 17 [ 2.051986] NET: Registered protocol family 15 [ 2.052078] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 2.052159] 8021q: 802.1Q VLAN Support v1.8 [ 2.052224] Key type dns_resolver registered [ 2.062870] cpu cpu0: running cpufreq without cooling device: -38 [ 2.062937] Registering SWP/SWPB emulation handler [ 2.066161] Btrfs loaded [ 2.067825] Key type encrypted registered [ 2.093607] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.096033] mmc0: new high speed SDHC card at address 1234 [ 2.096614] mmcblk0: mmc0:1234 SA08G 7.21 GiB [ 2.098176] mmcblk0: p1 [ 2.176517] stmmaceth 1c50000.ethernet: no reset control found [ 2.176535] Ring mode enabled [ 2.176543] No HW DMA feature register supported [ 2.176550] Normal descriptors [ 2.176555] TX Checksum insertion supported [ 2.181212] libphy: stmmac: probed [ 2.181232] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active [ 2.181240] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01) [ 2.181653] ehci-platform 1c14000.usb: EHCI Host Controller [ 2.181694] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 2.181869] ehci-platform 1c14000.usb: irq 28, io mem 0x01c14000 [ 2.196396] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 2.196693] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.196705] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.196715] usb usb1: Product: EHCI Host Controller [ 2.196724] usb usb1: Manufacturer: Linux 4.1.3-bananapi ehci_hcd [ 2.196733] usb usb1: SerialNumber: 1c14000.usb [ 2.197511] hub 1-0:1.0: USB hub found [ 2.197576] hub 1-0:1.0: 1 port detected [ 2.198359] ehci-platform 1c1c000.usb: EHCI Host Controller [ 2.198399] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 2.198540] ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000 [ 2.216421] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 2.216708] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.216721] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.216730] usb usb2: Product: EHCI Host Controller [ 2.216739] usb usb2: Manufacturer: Linux 4.1.3-bananapi ehci_hcd [ 2.216748] usb usb2: SerialNumber: 1c1c000.usb [ 2.217437] hub 2-0:1.0: USB hub found [ 2.217501] hub 2-0:1.0: 1 port detected [ 2.218212] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 2.218249] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 2.218396] ohci-platform 1c14400.usb: irq 29, io mem 0x01c14400 [ 2.280650] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.280665] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.280675] usb usb3: Product: Generic Platform OHCI controller [ 2.280684] usb usb3: Manufacturer: Linux 4.1.3-bananapi ohci_hcd [ 2.280693] usb usb3: SerialNumber: 1c14400.usb [ 2.281386] hub 3-0:1.0: USB hub found [ 2.281453] hub 3-0:1.0: 1 port detected [ 2.282172] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 2.282211] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 2.282357] ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400 [ 2.336496] ata1: SATA link down (SStatus 0 SControl 300) [ 2.341108] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.341146] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.341174] usb usb4: Product: Generic Platform OHCI controller [ 2.341201] usb usb4: Manufacturer: Linux 4.1.3-bananapi ohci_hcd [ 2.341227] usb usb4: SerialNumber: 1c1c400.usb [ 2.343052] hub 4-0:1.0: USB hub found [ 2.343214] hub 4-0:1.0: 1 port detected [ 2.344507] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 2.355846] vcc5v0: disabling [ 2.355890] vcc3v0: disabling [ 2.379803] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) [ 2.379939] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 2.381211] devtmpfs: mounted [ 2.382229] Freeing unused kernel memory: 316K (c0953000 - c09a2000) [ 2.876665] usb 4-1: new full-speed USB device number 2 using ohci-platform [ 3.056571] usb 4-1: device descriptor read/64, error -62 [ 3.346618] usb 4-1: device descriptor read/64, error -62 [ 3.454102] udevd[206]: starting version 175 [ 3.636615] usb 4-1: new full-speed USB device number 3 using ohci-platform [ 3.816636] usb 4-1: device descriptor read/64, error -62 [ 4.004741] evbug: Connected device: input0 (axp20x-pek at m1kbd/input2) [ 4.109899] usb 4-1: device descriptor read/64, error -62 [ 4.396691] usb 4-1: new full-speed USB device number 4 using ohci-platform [ 4.816438] usb 4-1: device not accepting address 4, error -62 [ 4.896420] cfg80211: Calling CRDA to update world regulatory domain [ 4.996534] usb 4-1: new full-speed USB device number 5 using ohci-platform [ 5.059729] cfg80211: World regulatory domain updated: [ 5.059779] cfg80211: DFS Master region: unset [ 5.059797] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 5.059828] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 5.059855] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 5.059880] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 5.059906] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A) [ 5.059933] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 5.059959] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 5.059985] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 5.060010] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 5.416493] usb 4-1: device not accepting address 5, error -62 [ 5.416725] usb usb4-port1: unable to enumerate USB device [ 6.828176] EXT4-fs (mmcblk0p1): re-mounted. Opts: data=writeback,commit=600,errors=remount-ro [ 9.206139] Adding 262140k swap on /var/swap. Priority:-1 extents:3 across:360444k SS [ 11.484197] random: dd urandom read with 21 bits of entropy available [ 12.957609] RX IPC Checksum Offload disabled [ 12.957641] No MAC Management Counters available [ 17.946838] stmmaceth 1c50000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 25.244896] Bluetooth: Core ver 2.20 [ 25.245022] NET: Registered protocol family 31 [ 25.245031] Bluetooth: HCI device and connection manager initialized [ 25.245058] Bluetooth: HCI socket layer initialized [ 25.245073] Bluetooth: L2CAP socket layer initialized [ 25.245110] Bluetooth: SCO socket layer initialized [ 25.297026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 25.297046] Bluetooth: BNEP filters: protocol multicast [ 25.297070] Bluetooth: BNEP socket layer initialized [ 25.311362] Bluetooth: RFCOMM TTY layer initialized [ 25.311414] Bluetooth: RFCOMM socket layer initialized [ 25.311447] Bluetooth: RFCOMM ver 1.11 [ 37.177263] usb 4-1: new full-speed USB device number 6 using ohci-platform [ 37.357290] usb 4-1: device descriptor read/64, error -62 [ 37.647281] usb 4-1: device descriptor read/64, error -62 [ 37.937306] usb 4-1: new full-speed USB device number 7 using ohci-platform [ 38.117317] usb 4-1: device descriptor read/64, error -62 [ 38.407346] usb 4-1: device descriptor read/64, error -62 [ 38.697361] usb 4-1: new full-speed USB device number 8 using ohci-platform [ 39.117348] usb 4-1: device not accepting address 8, error -62 [ 39.297461] usb 4-1: new full-speed USB device number 9 using ohci-platform [ 39.717386] usb 4-1: device not accepting address 9, error -62 [ 39.717494] usb usb4-port1: unable to enumerate USB device [ 40.007465] usb 4-1: new full-speed USB device number 10 using ohci-platform [ 40.187473] usb 4-1: device descriptor read/64, error -62 [ 40.477501] usb 4-1: device descriptor read/64, error -62 [ 40.767510] usb 4-1: new full-speed USB device number 11 using ohci-platform [ 40.947525] usb 4-1: device descriptor read/64, error -62 [ 41.237570] usb 4-1: device descriptor read/64, error -62 [ 41.527567] usb 4-1: new full-speed USB device number 12 using ohci-platform [ 41.947558] usb 4-1: device not accepting address 12, error -62 [ 42.127614] usb 4-1: new full-speed USB device number 13 using ohci-platform [ 42.547625] usb 4-1: device not accepting address 13, error -62 [ 42.547750] usb usb4-port1: unable to enumerate USB device [ 46.942386] random: nonblocking pool is initialized user1@bananapi:~$

It's much simpler and faster to add this functionality than teach you step by step how to do it ... even if it's written clearly enough for average Linux user. But problems might occur and this bring more questions. Read forum / FAQ and you'll get much needed info. It's simple but you need to invest some time. Download this image and burn to SD (wait until it's uploaded) http://mirror.igorpecovnik.com/Bananapi_Debian_3.3_wheezy_4.1.3.zip I added support for Philips SAA7111/3/4/5 video decoders You need to use my image for easy update. For rest read FAQ. Some manual work is needed. I never try to compile kernel on device because it's way to slow. I don't know if my tool works without any fixes but in any case you need to download a proper Linux source. And I hope you know limitations of kernels 3.4 vs 4.x ? BTW: most important things are documented on my blog, sunxi wiki, ...

Hi! Can someone please explain how can I activate the "Encoders, decoders, sensors and other helper chips\VIDEO_SAA711X" option in menuconfig from Device Drivers -> Multimedia support ? I have banana pi and it is running debian wheezy kernel 3.19.3 from this link: http://mirror.igorpecovnik.com/Bananapi_Debian_2.5_wheezy_3.19.3.zip I also have a easycap somagic usb video capture card and in order to install it's drivers, I need to activate all of it's dependencies from kernel otherwise when compiling the module, I get many warnings and when I try to do modprobe to the generated .ko file, it also gives me error. I contacted the developers of the driver for the easycap somagic smi2021 usb card and they said that those errors are probably because dependencies upon which the driver is depending are not installed/activated. Here is the full conversation (it is short): https://github.com/Manouchehri/smi2021/issues/11 In the folder where I downloaded and extracted debian wheezy 3.19.3 when I run make menuconfig, I need to go to "Device Drivers -> Multimedia support ->Encoders, decoders, sensors and other helper chips -> Philips SAA7111/3/4/5 video decoders" but when I go to "Multimedia Support" there is no "Encoders, decoders, sensors and other helper chips" to activate or to choose. How can I get the "Encoders, decoders, sensors and other helper chips" to be in "Multimedia Support" when I run make menuconfig? Thanks

Hi Igor! Thank you for your quick reply. I have looked up into https://github.com/igorpecovnik/liband it is a really big library. I will continue to study it. But in the meantime, if I download the 4.1.3 kernel from you, how can I install it without changing my current desktop environment? I have created some files there, installed some programs, etc. If I install the new kernel, will that delete all of that data? Also, when I compiled the kernel with the method I wrote earlier, in the boot folder, it created 3 new files: vmlinuz-3.19.3 and 2 more files. There was also a vmlinuz-3.19.3-bananapi and the zImage was a link to it. So I thought that if I change link of the zImage to the newly created vmlinuz-3.19.3, I will be able to use the new kernel, but I was wrong. Now the Linux does not even boot. I have placed my sd card in my windows pc and copied back the old zImage which is pointing to vmlinuz-3.19.3-bananapi but it still does not boot. Do you know how can I make my linux boot again? And if it is possible, can I boot it from vmlinuz-3.19.3 as when I compiled it, in menuconfig I added extra options which were needed when installing the standalone smi2021 module. Basically, I need a kernel that will have the options of Philips SAA7111/3/4/5 video decoders from menuconfig installed or tuned on, by default.

Here is what I did but i think the module ( Philips SAA7111/3/4/5 video decoders ) has not been installed. 1. Download http://mirror.igorpecovnik.com/Bananapi_Debian_2.5_wheezy_3.19.3.zip 2. Extract in folder linux-3.19.3 3. cd to folder linux-3.19.9 4. run make menuconfig 5. Go to Device Drivers/Multimedia Support and unselect "Autoselect ancillary drivers (tuners, sensors, i2c, frontends)" and a new list appears 6. I go to the Encoders, decoders, sensors and other helper chips and press "Y" key to sellect the needed modules, in my case: Philips SAA7111/3/4/5 video decoders and a few others. 7. I save the configuration as .config in the same folder linux-3.19.3 and exit 8. I run make and it is compiling for about 2 hours 9. I run make modules 10. I run make modules_install 11. I run make install 12. I run reboot And fter the rebopot it seems that the Philips SAA7111/3/4/5 video decoders are still not installed as the program smi2021 which requires the modules is still giving the same errors like there is no Philips SAA7111/3/4/5 video decoder installed. Is there a way to check for sure on my kernel is the Philips SAA7111/3/4/5 video decoder is installed? Also, am I compiling the kernel correctly? Thanks!

Hi is it possible to add the csc patch to the kernel at the next image ? https://github.com/rellla/linux-sunxi/commit/c92d32e1adc7ee2fcf014a9abf35039b59478bf3 drivers/video/sunxi/disp/de_fe.c @@ -1382,10 +1382,10 @@ __s32 DE_SCAL_Set_CSC_Coef_Enhance(__u8 sel, __u8 in_csc_mode, __u32 i; __s32 sinv, cosv; /* sin_tab: 7 bit fractional */ - bright = bright * 64 / 100; - bright = saturation * 64 / 100; - bright = contrast * 64 / 100; - bright = hue * 64 / 100; + bright = DIV_ROUND_CLOSEST((clamp(bright, 0, 100) * 63), 100); + saturation = DIV_ROUND_CLOSEST((clamp(saturation, 0, 100) * 63), 100); + contrast = DIV_ROUND_CLOSEST((clamp(contrast, 0, 100) * 63), 100); + hue = DIV_ROUND_CLOSEST((clamp(hue, 0, 100) * 63), 100); sinv = image_enhance_tab[8 * 12 + (hue & 0x3f)]; cosv = image_enhance_tab[8 * 12 + 8 * 8 + (hue & 0x3f)]; it's required for the newer sunxi-vdpau revisions to fix the mostly dark image.

2) Lime A10 image with kernel 3.4.108 and HW accelerated MATE desktop It starts boot, but it hangs. Output from serial console is below: U-Boot SPL 2015.04-dirty (Jul 14 2015 - 19:32:48) DRAM: 512 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 U-Boot 2015.04-dirty (Jul 14 2015 - 19:32:48) Allwinner Technology CPU: Allwinner A10 (SUN4I) I2C: ready DRAM: 512 MiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment HDMI connected: EDID: invalid EDID data Setting up a 1024x768 dvi console Error: no valid bmp image at 66000000 In: serial Out: vga Err: vga SCSI: SUNXI SCSI INIT SATA link 0 timeout. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode flags: ncq stag pm led clo only pmp pio slum part ccc apst Net: emac starting USB... USB0: USB EHCI 1.00 scanning bus 0 for devices... cannot reset port 1!? 1 USB Device(s) found USB1: USB EHCI 1.00 scanning bus 1 for devices... cannot reset port 1!? 1 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found Hit any key to stop autoboot: 0 6944 bytes read in 192 ms (35.2 KiB/s) switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 1548 bytes read in 181 ms (7.8 KiB/s) ## Executing script at 43100000 ** File not found /boot/.next ** 43508 bytes read in 458 ms (91.8 KiB/s) 5605360 bytes read in 657 ms (8.1 MiB/s) Kernel image @ 0x48000000 [ 0x000000 - 0x5587f0 ] Starting kernel ... <6>Booting Linux on physical CPU 0 <6>Initializing cgroup subsys cpuset <6>Initializing cgroup subsys cpu <5>Linux version 3.4.108-lime (root@kitchen) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #14 SMP PREEMPT Sun Jul 12 16:43:47 CEST 2015 CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: sun4i <6>Memory Reserved: <6> SYS : 0x43000000 - 0x4300ffff ( 64 kB) <6> LCD : 0x44000000 - 0x44ffffff ( 16 MB) Memory policy: ECC disabled, Data cache writeback <6>sunxi: Allwinner A10 revision C (AW1623/sun4i) detected. <7>On node 0 totalpages: 131072 <7>free_area_init_node: node 0, pgdat c0a7bb40, node_mem_map d0000000 <7> DMA zone: 512 pages used for memmap <7> DMA zone: 0 pages reserved <7> DMA zone: 65024 pages, LIFO batch:15 <7> Normal zone: 512 pages used for memmap <7> Normal zone: 65024 pages, LIFO batch:15 <6>PERCPU: Embedded 8 pages/cpu @d0405000 s8256 r8192 d16320 u32768 <7>pcpu-alloc: s8256 r8192 d16320 u32768 alloc=8*4096<c> <7>pcpu-alloc: <c>[0] <c>0 <c> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048 <5>Kernel command line: console=tty1 root=/dev/mmcblk0p1 rootwait rootfstype=ext4 sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_no_mali_mem_reserve sunxi_fb_mem_reserve=16 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=1 <6>PID hash table entries: 2048 (order: 1, 8192 bytes) <6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) <6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) <6>allocated 1048576 bytes of page_cgroup <6>please try 'cgroup_disable=memory' option if you don't want memory cgroups <6>Memory: 512MB = 512MB total <5>Memory: 489616k/489616k available, 34672k reserved, 0K highmem <5>Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc09d1b00 (10023 kB) .init : 0xc09d2000 - 0xc0a0b040 ( 229 kB) .data : 0xc0a0c000 - 0xc0a842b8 ( 481 kB) .bss : 0xc0a842dc - 0xc0c596b8 (1877 kB) <6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 <6>Preemptible hierarchical RCU implementation. <6> RCU dyntick-idle grace-period acceleration is enabled. <6> Additional per-CPU info printed with stalls. <6>NR_IRQS:192 <6>sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms <6>Console: colour dummy device 80x30 <6>console [tty1] enabled <6>Calibrating delay loop... And A10 CPU was very hot. And to you previous question: no, I don't check kernel 3.4.x before.

sr, user/pass is: root/0987654321 hwa is hardware accelerator (for video).