nikolas22t Posted December 5, 2020 Posted December 5, 2020 Can someone post the printenv for a NEO PLUS2 because i think i f*** up my device and doesn't boot from SD or USB .... the only i get is the boot menu. Or any ideas to help me to fix this ?
TRS-80 Posted December 5, 2020 Posted December 5, 2020 5 minutes ago, nikolas22t said: any ideas to help me to fix this ? Recovery section of docs have been recently updated.
nikolas22t Posted December 5, 2020 Author Posted December 5, 2020 => ext4load mmc 0 0x49000000 /boot/dtb/${fdtfile} Failed to mount ext2 filesystem... ** Unrecognized filesystem type **
TRS-80 Posted December 6, 2020 Posted December 6, 2020 You have to replace the variable ${fdtfile} with the actual name of your... something. I did not write those instructions (only edited them) but I think it is supposed to be... dtb file (maybe)?
Igor Posted December 6, 2020 Posted December 6, 2020 8 hours ago, nikolas22t said: Failed to mount ext2 filesystem... Is your SD card readable on some Linux? Is it clean Armbian with ext4 filesystem? Some other OS-es might have FAT as boot partition.
nicholas22t Posted December 6, 2020 Posted December 6, 2020 Sorry for the late response but i am only allowed to post only 2 post per day! Really? .. I made some progress , i can boot any image from SD that is openwrt but any linux image doesn't boot , i found about eflasher but i cannot find a single img file (all the eflasher downloads are 6 files and there is no tutorial how to burn to an sd )
Igor Posted December 6, 2020 Posted December 6, 2020 4 hours ago, nicholas22t said: Sorry for the late response but i am only allowed to post only 2 post per day! Really? .. Limit is here to limit the pressure on us. There is a lot more people that seeks for help, than its possible to give. It's a luxury - we are paying for you from our own pockets - if your problem gets addressed and you should know that right away. It's also a reminder that this is forum, a community support, not a professional technical support channel that will accept and deal with random people's random problems. It also prevents spammers and prevents excited newcomers to flood forum with many doubled/tripled/stupid/unrelated questions. Limit is gone: automatically in 7 days automatically if you receive "like" to your post with added value (asking for individual help on unsupported hardware is clearly not) get a forum subscription and cover a small part of the support costs you are adding by asking questions. Not to mention R&D costs. Once you become a part of the community and find a way to contribute, you get a lot more, lot quicker. 4 hours ago, nicholas22t said: made some progress , i can boot any image from SD that is openwrt but any linux image doesn't boot , i found about eflasher but i cannot find a single img file (all the eflasher downloads are 6 files and there is no tutorial how to burn to an sd ) We don't officially support https://www.armbian.com/nanopi-neo-plus2/ because we don't have this board and there was not enough support interest around community to cover that. I can't check, but perhaps someone else can. First make sure to check this: https://docs.armbian.com/User-Guide_Getting-Started/ (we have no proprietary eflasher) https://forum.armbian.com/topic/5699-how-to-provide-and-interpret-debug-output/ Then report with some logs - if there are any.
nicholas22t Posted December 6, 2020 Posted December 6, 2020 My Question now is how i can compact to one img file all the files below so i can burn to SD
Igor Posted December 6, 2020 Posted December 6, 2020 22 minutes ago, nicholas22t said: My Question now is how i can compact to one img file all the files below so i can burn to SD We don't provide free support for 3rd party proprietary solutions. Support here is dedicated only for official Armbian images. Which are also in way better shape than things you want to use.
Recommended Posts