Jump to content

Recommended Posts

Posted

this is somewhat 'off-topic' but still relevant to 'orange pi zero 3'

 

If Orange Pi Zero 3 is operated in warm climates (e.g. room temperature 30 deg C etc) , it can at times run up to like 60 deg C.
this is in open still air 

chart.thumb.png.cdcd1054f44282a0edf7be7ee67a48ee.png

 

adding a fan blowing at it reduce that by some 20 deg C to 40 deg C !

And this is my ghetto fan setup, no fancy case, no heatsink nothing, just a single long machine screw that lifts it up :)

 

checking temperatures is easy

> armbianmonitor -m
Stop monitoring using [ctrl]-[c]
Time        CPU    load %cpu %sys %usr %nice %io %irq   Tcpu  C.St.

18:03:39   480 MHz  0.00   0%   0%   0%   0%   0%   0%  40.8 °C  0/7^C


strictly speaking, 60 deg C is 'nothing to scream about' , I've a Rpi 4 hitting up 80 deg C and it throttles.
similarly use a fan blowing at it + a heat sink over the cpu, drastically reduce running temperatures.

for 'occasional' use, I don't think it is necessary to have a fan blowing at the Orange Pi Zero 3.

I think it is feasible to run at lower temperatures if I disable and unclock the GPU and HDMI, but for now I'm not sure how to go about doing that.
Initially, I'm thinking maybe the wifi is causing it, but now I don't think so, it is moderately likely the gpu is heating it up a bit.
And still air don't seem to dissipate heat very well.




 

fan.jpg

Posted

just like to say that the recent images

works just well

    _             _    _                                         _ _        
   /_\  _ _ _ __ | |__(_)__ _ _ _    __ ___ _ __  _ __ _  _ _ _ (_) |_ _  _ 
  / _ \| '_| '  \| '_ \ / _` | ' \  / _/ _ \ '  \| '  \ || | ' \| |  _| || |
 /_/ \_\_| |_|_|_|_.__/_\__,_|_||_|_\__\___/_|_|_|_|_|_\_,_|_||_|_|\__|\_, |
                                 |___|                                 |__/ 
 v25.8 rolling for Orange Pi Zero3 running Armbian Linux 6.12.35-current-sunxi64

 Packages:     Debian stable (bookworm)
 Support:      for advanced users (rolling release)
 IPv4:         (LAN) xxx.xxx.xxx.xxx (WAN) yyy.yyy.yyy.yyy
 IPv6:         fd00:xxxx:xxxx::xxxx:xxxx (WAN) xxxx:xxxx::yyyy:yyyy
 WiFi AP:      SSID: (ssid), 

 Performance:  

 Load:         2%                Uptime:       3:50
 Memory usage: 4% of 3.83G  
 CPU temp:     41°C              Usage of /:   3% of 58G    
 RX today:     7 MiB        
 Commands: 

 Configuration : armbian-config
 Monitoring    : htop


 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines