jumbo125 Posted October 10, 2023 Share Posted October 10, 2023 Hello Today i have a problem, which i had sometimes randomly. But today i'm at home, so i can connect the odroid via hdmi port. The error message is: kernel panic..... sorry, but i only can make a picture from the monitor. This is the picture: thank you a lot 0 Quote Link to comment Share on other sites More sharing options...
Werner Posted October 10, 2023 Share Posted October 10, 2023 Tried current kernel? Edge can break anytime... 0 Quote Link to comment Share on other sites More sharing options...
jumbo125 Posted October 10, 2023 Author Share Posted October 10, 2023 how can i change the kernel? i change to edge, because i have reboot problems. but i fixed it with another sd card. So, how i can go back to the "current" kernel? 0 Quote Link to comment Share on other sites More sharing options...
SteeMan Posted October 10, 2023 Share Posted October 10, 2023 50 minutes ago, jumbo125 said: So, how i can go back to the "current" kernel? armbian-config lets you switch kernels 0 Quote Link to comment Share on other sites More sharing options...
jumbo125 Posted October 10, 2023 Author Share Posted October 10, 2023 okay. thank you whats to correct full syntax for the terminal? 0 Quote Link to comment Share on other sites More sharing options...
jumbo125 Posted October 10, 2023 Author Share Posted October 10, 2023 @Werner which is the current/default kernel? i have this choices i see there is a new armbian avaible for my odroid c2. is it important to change from jammy to Armbian 23.8 Bookworm??? can i upgrade without loose all my datas? 0 Quote Link to comment Share on other sites More sharing options...
jumbo125 Posted October 11, 2023 Author Share Posted October 11, 2023 i tried to find out, the install-date of each kernel version.... all my log files are empty.... i tried to open all files in var/log/apt... they are all empty 0 Quote Link to comment Share on other sites More sharing options...
Werner Posted October 11, 2023 Share Posted October 11, 2023 I don't know. Neither do I have such a device nor I am a developer. I can give generic advice only. Overall you can try any kernel from this list. 18 hours ago, jumbo125 said: is it important to change from jammy to Armbian 23.8 Bookworm?? Not sure that exactly you mean by this question. However here are two ansers that might be right: - You cannot "upgrade" from a Ubuntu-based userspace to a Debian-based one since they are incompatible. - Any userspace (Bookworm, Bullseye, Jammy...) for a board are shipped with the very same kernel package. So hardware-supporting-wise does this not make any difference. 0 Quote Link to comment Share on other sites More sharing options...
SteeMan Posted October 11, 2023 Share Posted October 11, 2023 19 hours ago, jumbo125 said: which is the current/default kernel? Armbian comes with three levels of linux kernels in general (not all boards support all types). edge = "bleeding edge" or development kernels, not supported, meant for testing only; current = the currently supported stable kernels; legacy = either a vendor supplied kernel (often not maintained) or an older stable mainline kernel, generally not supported but provided for testing/compatibility reasons. As @Werner stated above you want to install a 'current' kernel. In the list you showed, you are only showing 'edge' kernels. You need to select one that uses the word 'current' where you are seeing 'edge' in the listing. 0 Quote Link to comment Share on other sites More sharing options...
jumbo125 Posted October 11, 2023 Author Share Posted October 11, 2023 Okay How can I get a current kernel. All kernels in the list have edge 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.