Twosky2000 Posted January 16, 2017 Share Posted January 16, 2017 Hi there, I want to use my NanoPi in a Walloutlet to controll my Sonos system. My Problem at the moment is that the Nano PI gets really hot (65° Celsius). At the moment i only got a Raspberry Pi Cooling set(http://www.conrad.ch/ce/de/product/1267831/Kuehlungs-Kit-Raspberry-Pi-A-B-B-Cubieboard-Banana-Pi). Is there a way to get the Board to get to 45° Celsius with no fan? Thanks for the Project, good to see that someone works on these devices to keep them Supported with the newest stuff. Greetings from Switzerland Twosky2000 Link to comment Share on other sites More sharing options...
Igor Posted January 16, 2017 Share Posted January 16, 2017 H3 get's little hooter so don't worry about. 45° should be possible to achieve with a decent heat sink and low load. ... but you can still do some more fine tuning. read documentation to see how to optimise:https://forum.armbian.com/index.php/topic/1614-running-h3-boards-with-minimal-consumption/https://docs.armbian.com/Hardware_Allwinner-H3/ get a proper heat sink contribute to the project. Thanks. Link to comment Share on other sites More sharing options...
jerryc Posted January 17, 2017 Share Posted January 17, 2017 you should get the heat sink from them. they stick to the back and i get like 40 to 50 C Link to comment Share on other sites More sharing options...
firman Posted January 18, 2017 Share Posted January 18, 2017 Check out your board hw revision with schematics on fa wiki page. Bad luck if you have no dc-dc U7 ic. Link to comment Share on other sites More sharing options...
Recommended Posts