Jump to content

NanoPi Neo Last Official Build


dave3
Go to solution Solved by Werner,

Recommended Posts

Back in March I ran into problems with the community builds for the NanoPi Neo, for Debian Bookworm.  It would boot up initially, but within 30 minutes or so, it would crash.  So I did a fresh install from the last official build I had saved from June 2023:


Armbian_23.5.2_Nanopineo_bookworm_current_6.1.30


And then I froze these packages to keep the working firmware and kernel:


armbian-firmware/bookworm,bookworm 24.2.1 all [upgradable from: 23.05.1--1-SAfece-B6ae3]
linux-dtb-current-sunxi/bookworm 24.2.1 armhf [upgradable from: 23.05.1--6.1.30-Sa343-D8bc9-P73a0-C162eHfe66-HK01ba-V014b-B9c18]
linux-image-current-sunxi/bookworm 24.2.1 armhf [upgradable from: 23.05.1--6.1.30-Sa343-D8bc9-P73a0-C162eHfe66-HK01ba-V014b-B9c18]
linux-u-boot-nanopineo-current/bookworm 24.2.1 armhf [upgradable from: 23.05.1--2022.04-Se4b6-P6b27-H0429-Ve2df-B91a8]

 

I know there are newer official builds from when it was still supported, but I can't find them available for download anymore.  Do you know if there's an archive somewhere that would have it?  Thanks.

Link to comment
Share on other sites

Thank you!  It looks like what I had was pretty close, anyway.  The last one was:

 

Armbian_23.8.1_Nanopineo_bookworm_current_6.1.47

 

from August 2023.

Link to comment
Share on other sites

dear dave3, 
Have you encountered the problem that when recording Armiban to an SD card, the nano pi neo air does not appear on the PC as a com port? If I install the old version of Armbian 5.73 and connect it via USB to the PC, it sees it as a com port.

Link to comment
Share on other sites

I don't think I've ever tried to connect the NanoPi to the PC to access the SD card.  I didn't know there was such a thing.  I just use a usb SD card adapater.

Link to comment
Share on other sites

> Back in March I ran into problems with the community builds for the NanoPi Neo, for Debian Bookworm.  It would boot up initially, > but within 30 minutes or so, it would crash.  So I did a fresh install from the last official build I had saved from June 2023:

> Armbian_23.5.2_Nanopineo_bookworm_current_6.1.30

Dear @dave3
I had the same problem with my three NanoPi Neo2 (the H5 version of the Neo) :(
I went for the (latest) 6.1.36 image and did also the freeze kernel/firmware (now they are running cool/stabe:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines