wildcat_paris Posted December 19, 2015 Share Posted December 19, 2015 Hello, I am using for the first time a cable Neuftech PL2303HX I was looking @ lamobo-r1.fex file and cannot figure out which pins are the default uart for boot-up (not skilled enough yet) both links mention P13 as default, but I cannot get any messages from USB-uart cable (double checked UART RX & TX + ground) http://linux-sunxi.org/Lamobo_R1 http://www.bananapi.com/index.php/component/content/article?layout=edit&id=59 Thanks! Link to comment Share on other sites More sharing options...
Tido Posted December 20, 2015 Share Posted December 20, 2015 Hi, If I remember correctly wanted TK look at the boot up from R1 (couple months ago) - shortly after he returned, complaining there is no UART Link to comment Share on other sites More sharing options...
Igor Posted December 20, 2015 Share Posted December 20, 2015 Link to comment Share on other sites More sharing options...
wildcat_paris Posted December 20, 2015 Author Share Posted December 20, 2015 ok, thanks @tkaiser @Igor @Tido Reading http://linux-sunxi.org/LeMaker_Banana_Pi on the lamobo-r1 with "Armbian 5.00 mainline kernel 4.3.3" sudo /sbin/agetty --keep-baud 115200 38400 9600 ttyS0 vt220 using putty on my Trusty-based PC with Prolific cable serial /dev/ttyUSB0 115200 now creating my /etc/init/ttyS0.conf Et voilà merci à tous. Link to comment Share on other sites More sharing options...
Recommended Posts