RK3588 - Setting Up Mali & Hardware Acceleration

[David N]

I recently bought an orange pi plus and am using the armbian 6.12 server (https://dl.armbian.com/orangepi5-plus/Noble_current_server)

 

I'm wanting to setup hardware acceleration for jellyfin but having trouble with the right steps. I'm using jellyfin inside docker on the orange pi inside armbian. I've found various tutorials but it seems like some of them reference things that no longer exist (like panfork seems to no longer be needed for latest mesa if I'm understanding correctly?), so wanting to see what I need to do to set this up.

 

So it seems like I need to disable panthor and use mali instead, but I can't find in the armbian config menu the option to do that, and not sure if I know how to get the right mali. Any help would be greatly appreciated.

 

armbianmonitor is at https://paste.armbian.com/nurazajipu

 

I've seen these tutorials/posts for reference:

 

* https://akashrajpurohit.com/blog/setup-jellyfin-with-hardware-acceleration-on-orange-pi-5-rockchip-rk3558/

* https://github.com/andyshrk/mesa/blob/panthor-v4/Panfrost-build-howto.md

* https://forum.jellyfin.org/t-solved-hw-transcoding-rk3588-arch-not-working?pid=54084

* `https://forum.armbian.com/topic/49115-how-to-install-opencl-on-orangepi-5-plus/`

* https://forum.jellyfin.org/t-rockchip-transcode-missing-dev-mali0

Edited 11 hours ago by David N

[David N]

I did not realize there was a forum for orange pi plus, might be better there? https://forum.armbian.com/forum/250-orange-pi-5-plus/

[Werner]

moved

 

You are using the wrong kernel branch. You need vendor 6.1.y kernel. This is also mentioned in the official documentation of Jellyfin.