tuxd3v Posted July 23, 2018 Posted July 23, 2018 Hi Guys, I wanted a debian stretch based OS, and I followed Olimex consideration on Armbian. The I visited the Page of Lime2( not nand or emmc): https://www.armbian.com/olimex-lime-2/ The stretch Image that is there...is configured to boot from emmc :( I want a debian stretch based version. I checked sha256 checksums OK. Serial Debug Output: U-Boot SPL 2017.11-armbian (Jan 25 2018 - 01:01:01) DRAM: 1024 MiB CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 Trying to boot from MMC1 mmc_init: -110, time 37 spl: mmc init failed with error: -110 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### How can I solve this situation? can I write a new uboot version? how to do it on Armbian_5.38_Lime2_Debian_stretch_next_4.14.14.img image? thanks in advance. Best Regards tux
Igor Posted July 23, 2018 Posted July 23, 2018 49 minutes ago, tuxd3v said: The stretch Image that is there...is configured to boot from emmc I want a debian stretch based version. I checked sha256 checksums OK. This must be something else. I own Lime2 without eMMC and it used to work with such configuration. Board has NAND but that should be irrelevant. Since I am out of office, I can't assist very well. Can you try booting this image: https://dl.armbian.com/lime2/Ubuntu_bionic_next_nightly.7z (we only create one test image which is Ubuntu. To hunt many possible userspace bugs at the same time) Manual u-boot compile and install: http://linux-sunxi.org/Mainline_U-Boot (you still might need to add "some" patches)
Recommended Posts