1 1
linda

Can't install PINE A64-LTS to eMMC

Recommended Posts

Is there a way to boot the Pine-A64 LTS with Armbian via eMMC?

I can use the SD card to boot the armian-Sopine image, but the eMMC memory is not recognized.

With the Ayufan image (jessie-minimal) on SD card (https://github.com/ayufan-pine64/linux-build/releases), I can at least recognize the eMMC memory and using
          sudo dd bs = 30M if = Image / jessie-minimal-sopine-0.7.19-118.img of =/dev/ mmcblk1
copy to the eMMC memory. I removed the SD card and booted with eMMC.

 

I did the same steps with the Armbian image and write the Armbian image on the eMMC (with the Ayufan image on SD card)

        sudo dd bs=30M if=Image/Armbian_5.38_Pine64so_Ubuntu_xenial_default_3.10.107.img of=/dev/mmcblk1

and nothings happens after the reboot.

 

There are further steps that I have to carry out?

Share this post


Link to post
Share on other sites

Hello,
unfortunately, I do not have a solution yet to install Arbmian on an eMMC and boot from eMMC.

The problem is very important to me because I need the PineLTS in a project.

Is it planned that the detection of the eMMC will be built into a current SoPine image. It would help me a lot.
 

Thanks a lot you in advance!

Share this post


Link to post
Share on other sites
10 hours ago, Matthew Harding said:

and this is why Armbian will never stay in the market


Armbian is 99.5% sponsored from our own pockets so its pretty irrelevant what you or market thinks about.

 

10 hours ago, Matthew Harding said:

support is useless!


Check the contract you have with "us". Support is "as is".

Perhaps your hardware, which you actually paid for, is total junk? And you only waste our precious time?

 

If you demand that some problem gets fixed, things changes for 360. Than better start here:
https://www.debian.org/consultants/

https://www.indeed.com/q-Kernel-Hacker-jobs.html

Share this post


Link to post
Share on other sites

To be fair Matthew, there don't seem to be any images for this board that can boot from eMMC that are actually being maintained. It's sad, but unfortunately it seems like it's a pretty normal problem for all these boards. There are often problems with one bit of hardware or another. Sometimes the manufacturer supplied image is working, but then you're probably stuck on an old kernel or the image comes with tons of stuff that you don't need. Still searching for the holy grail of a board that is cheap, well built and can boot from eMMC. I really wanted it to be Pine, but so far the closest is the NanoPC-T3+ although you can only run the Armbian image for the T3 and you lose half the RAM :-( Still half the RAM is better than not booting at all.

Share this post


Link to post
Share on other sites

@crazystick Yeah, my hardware i bought that Armbian so proudly advertise does not function properly,  this is a huge problem for the SBC industry, and this is why another OS will come along that will be better supported,. I ask a question on here, and i only get replied to when i state something is useless, not what i asked for. This is the problem with community based OS's. 

 

Anyway let me take my useless hardware and use something else, Ayufan and Longsleep still have some images around. 

Share this post


Link to post
Share on other sites

@Matthew Harding I think I tried those already. I think one of them also can't boot from eMMC and the other was on a 3.x kernel and some other peripheral didn't work for me. Please post an update here if one of those images does work for you. In the meantime fingers crossed someone can figure out how to make this work in Armbian, it's unfortunately beyond my skills.

Share this post


Link to post
Share on other sites
16 hours ago, Matthew Harding said:

Anyway let me take my useless hardware and use something else, Ayufan and Longsleep still have some images around. 


I will notify them you are coming so both will be prepared to stop what they are doing and focus to satisfy your needs. But wait ... I think Longsleep is long gone from supporting this board (with kernel 3.10.y only) and Ayufan is busy with RK3399 since some time. You will need to find someone else.


Now read https://forum.armbian.com/topic/7783-cant-install-pine-a64-lts-to-emmc/?do=findComment&comment=82174 once again and try to understand how things are ...

 

 

16 hours ago, Matthew Harding said:

this is a huge problem for the SBC industry


Now imagine what would look like if would not waste our time to do what we do?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
1 1