Jump to content

Recommended Posts

Posted

Hello, I'm new to the Pi computers and all that, and I'm planning on doing a project, so I was wondering if the Opi One H3 would support packet injection and monitor mode on Armbian with the onboard wifi? Thanks in advance.

Posted

 

7 hours ago, Vuckovic Milos said:

with the onboard wifi


Onboard wifi chips are mainly on the low end which means their drivers are on the baseline functionality.  I am not aware of any board that would support monitor mode.

 

You will probably need to go with something on USB: 8811AU, 8812AU ... that will work.

Posted

I suggest you to buy one of the mentioned 8812AU USB dongles or, if you want to use the embedded WiFi,  a Zero Plus2 H3 w/ Nexmon.

RTL8189FTV should support monitor mode (it's mostly a matter of drivers), but I never tested it so I can't guarantee.

 

Posted

It said onboard network as for ethernet, not for wifi, haha i'm stupid... Will get the zero plus 2 h3 after doing some more research about monitor mode on that, thanks guys, I don't want to open another thread, so I'll ask here, does it support monitor mode (Opi zero plus2)???

Posted

Hi, so I asked a question about monitor mode for a board that doesn't even have wifi onboard, what a pity... 
I've looked into it more, and I was wondering if these boards will support it (they have onboard wifi)
Orange pi zero h2
Orange pi zero plus h5
Or do I have to opt for the more expensive Opi zero plus2?
Sorry for bothering, I'm quite a noob, haha.

Posted
10 hours ago, Vuckovic Milos said:

Orange pi zero h2
Orange pi zero plus h5
Or do I have to opt for the more expensive Opi zero plus2?


1. No monitor mode, most shitty wifi chip ever seen on those boards. Stay away.

2. Possible, but not OOB. You will need to patch/hack drivers.

3. Possible, probably not OOB. You will need to patch/hack drivers. This chip is similar that the one on RPi3 for which IIRC I saw some patches for this function.

 

10 hours ago, Vuckovic Milos said:

I'm quite a noob


In this case its highly recommended to buy 8811AU/8812AU based USB wifi, where this will work plug and play.

Posted
10 hours ago, Vuckovic Milos said:

Hi, so I asked a question about monitor mode for a board that doesn't even have wifi onboard, what a pity... 
I've looked into it more, and I was wondering if these boards will support it (they have onboard wifi)
Orange pi zero h2
Orange pi zero plus h5
Or do I have to opt for the more expensive Opi zero plus2?
Sorry for bothering, I'm quite a noob, haha.

 

Although I suggest you to buy one of that dongles if you really want to go with Zero Plus2 be sure to buy the H3 version, since Nexmon doesn't come with aarch64 support

Posted

Alright, thanks, looks like I'll buy the opi one+ a usb wifi dongle, May you guys suggest me one that will work and possibly fit in the plastic casing? Also, as cheap as possible (Doesn't have to fit, but It'd be good)

Posted
10 hours ago, Vuckovic Milos said:

Alright, thanks, looks like I'll buy the opi one+ a usb wifi dongle, May you guys suggest me one that will work and possibly fit in the plastic casing? Also, as cheap as possible (Doesn't have to fit, but It'd be good)

 

https://www.armbian.com/orange-pi-one/

If you live in EU and Amazon.de is in your reach you only need to click to the red zone and you get best option. In case amazon.de is not the best for you, search around Aliexpress, Gearbest, ... for exact this one. 

 

Spoiler

8811-ac.png

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines