m][sko

when windows dev boot from acpi
https://github.com/shawnguo2/linux/commits/wdk2023-acpi-6.2
 
display is working over efifb
build in ethernet is working
build in wifi use ath11k and armbian firmware is missing all of this https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/log/ath11k/WCN6855/hw2.0/
all usb ports working
cpufreq don't

@Igor
 
my PR 
https://github.com/armbian/build/pull/1909

I mount this one on Hikey970
I can only recommend!
 

I mount this one on Hikey970
I can only recommend!
 

I mount this one on Hikey970
I can only recommend!
 

I think that this is faster way
sudo apt-get install software-properties-common -y
sudo add-apt-repository ppa:oibaf/graphics-drivers 
sudo apt-get update
sudo apt-get upgrade
but oibaf provide only arm64 packages!
 

I think that this is faster way
sudo apt-get install software-properties-common -y
sudo add-apt-repository ppa:oibaf/graphics-drivers 
sudo apt-get update
sudo apt-get upgrade
but oibaf provide only arm64 packages!
 

this fix my problem
https://github.com/mripard/sunxi-mali/blob/master/patches/0018-mali-support-building-against-4.20.patch

It looks like they fixed the bug.
As I was able to build the image and all work fine 
except It only work on ubuntu 18.04
so run NO_HOST_RELEASE_CHECK=yes ./compile.sh
 
It freeze on ubuntu 16.04 in regenerating man pages
 
I am looking that all work is done in development branch and I want to make pull request
 
some changes with ubuntu 18.04
ntpdate is not instaled by default and they changed ntp daemon so ntpdate return error
missing package rcconf  but armbian-conf depend on that
 
so temporary workaround just add 
PACKAGE_LIST_ADDITIONAL="${PACKAGE_LIST_ADDITIONAL/armbian-firmware/}"
PACKAGE_LIST="${PACKAGE_LIST/rcconf/}"
 

It looks like they fixed the bug.
As I was able to build the image and all work fine 
except It only work on ubuntu 18.04
so run NO_HOST_RELEASE_CHECK=yes ./compile.sh
 
It freeze on ubuntu 16.04 in regenerating man pages
 
I am looking that all work is done in development branch and I want to make pull request
 
some changes with ubuntu 18.04
ntpdate is not instaled by default and they changed ntp daemon so ntpdate return error
missing package rcconf  but armbian-conf depend on that
 
so temporary workaround just add 
PACKAGE_LIST_ADDITIONAL="${PACKAGE_LIST_ADDITIONAL/armbian-firmware/}"
PACKAGE_LIST="${PACKAGE_LIST/rcconf/}"
 

It looks like they fixed the bug.
As I was able to build the image and all work fine 
except It only work on ubuntu 18.04
so run NO_HOST_RELEASE_CHECK=yes ./compile.sh
 
It freeze on ubuntu 16.04 in regenerating man pages
 
I am looking that all work is done in development branch and I want to make pull request
 
some changes with ubuntu 18.04
ntpdate is not instaled by default and they changed ntp daemon so ntpdate return error
missing package rcconf  but armbian-conf depend on that
 
so temporary workaround just add 
PACKAGE_LIST_ADDITIONAL="${PACKAGE_LIST_ADDITIONAL/armbian-firmware/}"
PACKAGE_LIST="${PACKAGE_LIST/rcconf/}"
 

I want tou share with you my experience with weston with mali wayland drivers
https://forum.odroid.com/viewtopic.php?f=138&t=28426&start=50#p213474
 
Wish list:
Can you guys add 
/lib/udev/rules.d/99-mali.rules
KERNEL=="mali",SUBSYSTEM=="misc",MODE=="0777"
to for all board with mali GPU
 
And also set up directory and library cache for mali userspace drivers 
so all application will use mali  version istead of mesa
 
We still have problem with v-sync with amlogic DRM driver
 

this is list of patch set that I use on odroid c2
desktop is working, hdmi too, ethernet too,
mali driver loaded fine
I didn't check audio
 
0001-ARM64-dts-meson-gxm-Add-support-for-Khadas-VIM2.patch
0002-ARM64-dts-meson-gxbb-allow-child-devices-on-the-USB-.patch
0003-ARM64-dts-meson-gxbb-odroidc2-take-USB-hub-out-of-re.patch
0004-phy-meson-add-USB3-PHY-support-for-Meson-GXL.patch
0005-usb-host-add-a-generic-platform-USB-roothub-driver.patch
0006-usb-host-xhci-plat-integrate-the-platform-roothub.patch
0007-ARM64-dts-meson-gxl-add-USB-host-support.patch
0008-ARM64-dts-meson-gxm-add-GXM-specific-USB-host-config.patch
0009-ARM64-dts-meson-gx-Enable-USB-on-GXL-and-GXM-boards.patch
0014-clk-meson-gxbb-Add-VPU-and-VAPB-clockids.patch
0015-clk-meson-gxbb-Add-VPU-and-VAPB-clocks-data.patch
0016-drm-meson-dw_hdmi-Add-support-for-an-optional-extern.patch
0017-drm-meson-Add-missing-VPU-init.patch
0018-reset-meson-add-level-reset-support-for-GX-SoC-famil.patch
0019-soc-amlogic-add-Meson-GX-VPU-Domains-driver.patch
0020-soc-amlogic-meson-gx-pwrc-vpu-fix-power-off-when-pow.patch
0021-ASoC-meson-add-meson-audio-core-driver.patch
0022-ASoC-meson-add-register-definitions.patch
0023-ASoC-meson-add-aiu-i2s-dma-support.patch
0024-ASoC-meson-add-initial-i2s-dai-support.patch
0025-snd-meson-activate-HDMI-audio-path.patch
0026-drm-meson-select-dw-hdmi-i2s-audio-for-meson-hdmi.patch
0028-ARM64-dts-meson-gx-add-audio-controller-nodes.patch
0029-ARM64-dts-meson-gxl-add-sound-dai-cells-to-HDMI-node.patch
0031-ARM64-dts-meson-gxl-Take-eMMC-data-strobe-out-of-eMM.patch
0032-ARM64-dts-meson-gx-add-VPU-power-domain.patch
0033-ARM64-dts-meson-gx-Add-HDMI_5V-regulator-on-selected.patch
0034-ARM64-dts-meson-gx-grow-reset-controller-memory-zone.patch
0035-ARM64-dts-odroid-c2-Add-HDMI-and-CEC-Nodes.patch
0036-ARM64-dts-meson-activate-hdmi-audio-HDMI-enabled-boa.patch
1010_GXBB_NanoPi_K2_DTS_HDMI.patch
1020_GXBB_memory_allocation_meson_GX.patch
1030_GXBB_NanoPi_K2_DTS_HDMI_sound.patch
90-01-add_8812au_8821au_with_monitor_mode_and_frame_injection.patch
90-01-add_8812au_8821au_with_monitor_mode_and_frame_injection_update.patch
90-02-add_8814au_with_monitor_mode_and_frame_injection.patch
90-02-add_8814au_with_monitor_mode_and_frame_injection_update.patch
arm64_increasing_DMA_block_memory_allocation_to_2048.patch
arm64-set-default-target-to-Image.patch
aufs.4.14.patch1
bash_to_afterinstall.patch
odroidc2-enable-scpi-dvfs.patch
packaging-4.x-NEXT-with-postinstall-scripts.patch
patch-4.13.10-rt3.patch.disabled