Bananapi-R1 (lamobo-r1) Images

[dravida]

Hey there since i got a Bananapi-R1 recently ive started to notice that there are no up to Date Images out there.
Official support is over since 2016 and none of the Images later than Ubuntu 16.04 i found started booting or even have a working Download Link!

So i had to figure out how i could get a later Version installed on my Board by myself! 

I have compiled a Bullseye Image that works fine, the only things ive noticed are missing OTG and WirringPi Support!
Maybe someone knows a way how to get it working??

As i wrote before i couldnt find any recent Images out there, so i compiled some with this well documented Compiler by Armbian.

 

SSH is enabled by default, only Bullseye and Buster are tested!

______________________________
Login: root

Password: 1234

______________________________

Armbian Sid: Download

Armbian Bullseye: Download

Armbian Buster: Download

______________________________

Ubuntu Jammy: Download

Ubuntu Impish: Download

Ubuntu Focal: Download

______________________________
Kernel: Linux 5.15.32
Build date: 04.04.2022

Edited April 5, 2022 by dravida

[Werner]

Moved to P2P help.

As with all 3rd party images they should be used with the necessary care.

[dravida]

Thank you for moving,

you`re right @Werner!

Keep in mind that you have to figure out many things by yourself to get the Board working properly besides just booting and tinkering around with Linux! 

[Sven Werberger]

wan work very good portman and cockpit-webconsole ! now perfekt  for net work monitoring example /uptime-kuma

thank for create image i'm missing switch config tool is missing how i can config the switch port for mini net work?

best regards sven

Edited April 27, 2022 by Sven Werberger

[dravida]

Am 27.4.2022 um 19:45 schrieb Sven Werberger:

wan work very good portman and cockpit-webconsole ! now perfekt  for net work monitoring example /uptime-kuma

thank for create image i'm missing switch config tool is missing how i can config the switch port for mini net work?

best regards sven

Hey there, im sorry for not answering to my Thread since ive started it!

 

Currently im working on a Image with some more Network capabilitys so you can use it as a Switch, and im building a GUI on XFCE base (i dont use it very often but sometimes its useful!).
Do you know Software for configuring an Linux Device as a Switch?
 

For now im still facing Issues with OTG and GPIO support, they still dont Work. 😕

Actual Screenshot of the GUI with 1080p Output and usage of Ressources while running the GUI and a small Serial Client for Duino-Coin Mining:
 

[bianse]

Hi. 

I get recent Standard Images for this Board Lamobo R1 with the A20 Sunxi from here:

https://sd-card-images.johang.se/

 

works great.

 

Cheers

 

[laibsch]

I am always happy to see people keeping old hardware running.  But I think it would be best to make the necessary changes in Armbian itself.  I am happy to help out where I can be useful.