Dennboy Posted May 25, 2022 Share Posted May 25, 2022 Dear maintainers, Guess some device tree issues with neo3 got me into this mess, since rk3328-nanopi-neo3-rev02.dtb is missnig. Scanning mmc 1:1... Found U-Boot script /boot/boot.scr 3185 bytes read in 7 ms (444.3 KiB/s) ## Executing script at 00500000 Boot script loaded from mmc 1 428 bytes read in 6 ms (69.3 KiB/s) 12514638 bytes read in 556 ms (21.5 MiB/s) 30083584 bytes read in 1326 ms (21.6 MiB/s) Failed to load '/boot/dtb/rockchip/rk3328-nanopi-neo3-rev02.dtb' libfdt fdt_check_header(): FDT_ERR_BADMAGIC No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! Kind regards, Dennis 0 Quote Link to comment Share on other sites More sharing options...
Dennboy Posted May 25, 2022 Author Share Posted May 25, 2022 As a work-around, I managed to reuse dtb-5.10.63-rockchip64/rockchip/rk3328-nanopi-neo3-rev02.dtb from Armbian-21.08 so that I could boot the image again. Just learned that the board is no longer supported, that's probably why the devicetree file got removed. 0 Quote Link to comment Share on other sites More sharing options...
Igor Posted May 25, 2022 Share Posted May 25, 2022 3 hours ago, Dennboy said: Just learned that the board is no longer supported It doesn't have someone https://forum.armbian.com/staffapplications/application/8-single-board-computer-maintainer/ to take care of issues in order to get a better status: https://docs.armbian.com/User-Guide_Board-Support-Rules/ 0 Quote Link to comment Share on other sites More sharing options...
Werner Posted May 25, 2022 Share Posted May 25, 2022 moved to unsupported 0 Quote Link to comment Share on other sites More sharing options...
TonyMac32 Posted July 10, 2022 Share Posted July 10, 2022 https://github.com/armbian/build/pull/3979 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.