mycnc Posted September 22, 2017 Share Posted September 22, 2017 Hi, do you plan to add Desktop images for Rock64 ? Anyway thanks for your great job. Armbian is wonderful! Link to comment Share on other sites More sharing options...
Igor Posted September 22, 2017 Share Posted September 22, 2017 Board is the development / bring up phase. There will be desktop image ASAP. Thanks. Link to comment Share on other sites More sharing options...
mycnc Posted December 1, 2017 Author Share Posted December 1, 2017 Hi, do you have any progress on Rock64? Link to comment Share on other sites More sharing options...
Igor Posted December 1, 2017 Share Posted December 1, 2017 Just check project Github if there was any progress on this. In case of major progress, we mention that in a release log. It can take months, sometimes a year(s) before board is labeled stable. I only have RK3328 based TV box and have to get Rock64 first I'll check what can be done but in any case, this will still be a testing build. Link to comment Share on other sites More sharing options...
zador.blood.stained Posted December 1, 2017 Share Posted December 1, 2017 And I only have a pre-production board, and while it can be used to debug some general issues, USB3 and Ethernet have some differences compared to the commercially available boards. AFAIK desktop should work in general but without HW acceleration and with limited number of supported resolutions. Link to comment Share on other sites More sharing options...
matteobp Posted December 1, 2017 Share Posted December 1, 2017 Hi. I'm currently using the armbian image (Debian Jessie) on an Orange Pi Plus board as NAS, and I bought the Rock64 one because it should have better performance in copying to and from NAS (the current average for the Orange Pi Plus is about 28-30MB/s), although so far the performance are lower than Orange Pi Plus, but it is another story. I want to use the Armbian also on Rock64, and the only available image is the server one (https://dl.armbian.com/rock64/Ubuntu_xenial_default_nightly.7z), but I was not able to use it I have already created this post Can you help me? Sorry for duplication post. Thanks in advance. Matteo Link to comment Share on other sites More sharing options...
Recommended Posts