banana pi pro image build

[Cancer]

Hi All

 I've made for my sbc image, however found during this process  messages including 1 marked as error :

 

```

Error response from registry: failed to fetch the content of "ghcr.io/armbian/os/armbian-bsp-cli-bananapipro-current:1-PCc91e-V4b00-H9299-B1e5d-Rf36a": ghcr.io/armbian/os/armbian-bsp-cli-bananapipro-current:1-PCc91e-V4b00-H9299-B1e5d-Rf36a: not found

```

some repeatible during the process:

```

gpg: WARNING: unsafe ownership on homedir '/home/bask/.gnupg'

/usr/bin/deb-systemd-helper was not called from dpkg. Exiting.
/usr/bin/deb-systemd-helper was not called from dpkg. Exiting.
invoke-rc.d: unknown initscript, /etc/init.d/iperf3 not found.

```

and finally filtered from log:

```

filtered from log  @output/logs/log-build-322ed1c8-a4db-4873-85ac-be8e6a87fbd6.log.ans
Error 3 occurred in main shell /home/bask/Dokumenty/build/lib/functions/configuration/menu.sh:38
  dialog_if_terminal_set_vars() --> lib/functions/configuration/menu.sh:38
  interactive_config_ask_board_list() --> lib/functions/configuration/interactive.sh:149
  config_possibly_interactive_kernel_board() --> lib/functions/main/config-interactive.sh:16
  prep_conf_main_build_single() --> lib/functions/main/config-prepare.sh:21
  cli_standard_build_run() --> lib/functions/cli/cli-build.sh:22
  armbian_cli_run_command() --> lib/functions/cli/utils-cli.sh:136
  cli_entrypoint() --> lib/functions/cli/entrypoint.sh:176
  main() --> compile.sh:50

```

Not sure if I should worry or it is handled somehow?

I'll try an expert mode as there was not too much to configure and verify

Second thing: 90 mins for this process is normal? I was doing it on newly installed Ubuntu (directly on the disk in dual mode so whole HW available for it)

 

[Werner]

Excerpts are often useless. Provide full logs using the curl command from the end of each run.

5 minutes ago, Cancer said:

g: 90 mins for this process is normal?

If the used hardware isn't very powerful, yes, can be.

[Cancer]

HP Pavilion8 core processor, 32Gig RAM  laptop.

I wanted to limit information to limit time for digging into it, but here they are:

 

log-build-322ed1c8-a4db-4873-85ac-be8e6a87fbd6.log.ans summary-build-322ed1c8-a4db-4873-85ac-be8e6a87fbd6.md