masteripper Posted February 18, 2018 Share Posted February 18, 2018 Hello ...i have a probably "stupid" question but exactly is this pressure switch located on the back PCB of Beelink X2 i know its not the best angle but i guess that everyone that have dissasembled Beelink X2 has saw it...if you have issue recorgnize it i will take a photo (the one here is from a photo i found here) I tried to pull the Beelink out of the box and it wouldn't start....i guess it should be always pressed.... Link to comment Share on other sites More sharing options...
manuti Posted February 19, 2018 Share Posted February 19, 2018 This picture is mine, but published by @tkaiser http://linux-sunxi.org/File:Beelink_X2_3.1.1_RTL8189ES.jpg Is a pogo pin or sprig loaded, not a switch, it can be used to connect with a flat antenna in the cover of the box like the showed in the picture from this link: http://dreamlayers.blogspot.com.es/2014/11/craig-cvd601-android-stick.html Link to comment Share on other sites More sharing options...
masteripper Posted February 19, 2018 Author Share Posted February 19, 2018 Thanks man...i need to examine what went wrong and when i removed the pcb from the case it wouldn't start...maybe i am missing something. Link to comment Share on other sites More sharing options...
Recommended Posts