Bangliang Shen Posted November 28, 2018 Posted November 28, 2018 Hellow there, I installed Armbian_5.67_Aml-s9xxx_Ubuntu_bionic_default_4.19.0-rc7_desktop_20181117 to my Phicomm N1 box and found that the WIFI/Bluetooth is not available. Anyone can help me install the drivers? ____ ___ / ___|/ _ \__ ____ ____ __ \___ \ (_) \ \/ /\ \/ /\ \/ / ___) \__, |> < > < > < |____/ /_//_/\_\/_/\_\/_/\_\ Welcome to ARMBIAN 5.67 user-built Ubuntu 18.04.1 LTS 4.19.0-rc7-aml-s9xxx System load: 2.45 1.19 0.57 Up time: 9 min Memory usage: 16 % of 1844MB IP: 192.168.9.46 CPU temp: 49°C Usage of /: 9% of 29G storage/: 51% of 128M [ General system configuration (beta): armbian-config ] Last login: Wed Nov 28 12:14:46 2018 hardware info: CPU: Amlogic S905D RAM: 2G DDR3 8G eMMC Ethernet: RTL8211F Gigabit Ethernet WIFI/Bluetooth: CYW43455 ( same as Raspberry Pi 3B+ ) 5G WiFi IEEE 802.11n/ac with Integrated Bluetooth 4.1 Datasheet http://www.cypress.com/documentation/datasheets/cyw43455-single-chip-5g-wifi-ieee-80211nac-macbaseband-radio-integrated 1
guidol Posted December 10, 2018 Posted December 10, 2018 Maybe @balbes150 could you help with informations about to integrate the Cypress w43455 - if you do ask in this thread: The case of the Phicomm N1 looks - for me - very nice A Bit like a NeXT-device in white Where did you get your device and whats the normal price? Phicomm N1:http://www.phicomm.com/vn/index.php/Products/personal_show/cateid/15/id/72.html Specifications: Spoiler CPU： Amlogic S905 Cortex-A53 Quad Core 1.5Ghz Dimension： 110 x 110 x 40 mm Weight： 248g Wi-Fi： 2.4G/5G BT： BLE 4.1 Remote Access： Y RAM+ROM： 2GB+8GB HDMI Port： 1 USB Port： USB2.0 x 2 Maximum Hard disk su： 4 Write/Read Speed： 60MB/s Resolution： 4K 60fps Screen Projection： Y Screen Shot： Y TV Remote： Y Digital Currency： DayDay Win Other page for armbian-reference: https://www.mivm.cn/phicomm-n1-linux/
Bangliang Shen Posted December 15, 2018 Author Posted December 15, 2018 @guidol I am trying to upload Phicomm N1 to my eBay shop. But its postage is higher than the device itself. I can say it is bloody cheap. Just 30usd/set plus shipping charges from China to worldwide. 7*7*3 Inch in size, less than 2 lb. I think the shipping charges will be 40usd by FedEx to the USA. Hardware: CPU: Amlogic S905D, ARM Cortex-A53, Quad Core 2GHz GPU: ARM Mali™-450, 4K@60fps Hardware acceleration support, HDMI 2.0 RAM: K4B4G1646E, DDR3-1866MHz 512MB*4=2GB ROM: KLM8G1GEME, 8GB eMMC Port: 1*HDMI 2.0; 2*USB2.0; 1*Gigabit Ethernet Power Adapter: Input 110-240V～50/60Hz AC; Output 12V/2A DC Ethernet(LAN): RTL8211F Gigabit Ethernet WIFI/Bluetooth: CYW43455 (same as Raspberry Pi 3B+) 2.4G/5G WiFi IEEE 802.11n/ac with Integrated Bluetooth 4.1 Wireless Datasheet: http://www.cypress.com/documentation/datasheets/cyw43455-single-chip-5g-wifi-ieee-80211nac-macbaseband-radio-integrated
Tido Posted December 15, 2018 Posted December 15, 2018 17 minutes ago, Bangliang Shen said: Output 12V/2A awesome 24W.. @Bangliang Shen can you confirm this?
Bangliang Shen Posted December 15, 2018 Author Posted December 15, 2018 Yes I read this on the power adaptor it says Output 12V/2A and the adaptor size is even smaller than those of Netgear routers. This is a really cool device! 1
cnxsoft Posted March 11, 2019 Posted March 11, 2019 Interesting box, especially with all the Linux distributions provided by the Chinese community. But I can't find it for sale anywhere, even in China. I could see it in JD (for 1099 RMB!), but it's now been removed.
guidol Posted March 11, 2019 Posted March 11, 2019 3 hours ago, cnxsoft said: Interesting box, especially with all the Linux distributions provided by the Chinese community. https://www.cnx-software.com/2019/03/11/phicomm-n1-tv-box-linux-distributions/
balbes150 Posted March 14, 2019 Posted March 14, 2019 On 11/28/2018 at 3:37 PM, Bangliang Shen said: Phicomm N1 box and found that the WIFI/Bluetooth is not available. Anyone can help me install the drivers? Have you tried the latest version of the image with the kernel 5 ?
Zhaoxin Zhong Posted March 7, 2020 Posted March 7, 2020 Quote Phicomm N1 box and found that the WIFI/Bluetooth is not available. Anyone can help me install the drivers? there is an article about using dtd&dtc to replace the current wifi/bluetooth module as Raspberry Pi 3B+ but i am not tried yet. wish it helps https://www.raspberrypi.org/documentation/configuration/device-tree.md
Recommended Posts