tkaiser Posted April 11, 2016 Posted April 11, 2016 Hi, in addition to some research regarding a few quality SD cards I wanted to ask our users to contribute to some collective benchmarking. In case you bought Samsung, SanDisk, Toshiba or Transcend SD cards within the last few months, have a A20 device and are able to test the card in question, please use this A20 Armbian 5.07 image (vanilla kernel, performance governor, no user creation), burn the image on the card, connect board to network, start it and do the following at least twice iozone -e -I -a -s 100M -r 4k -r 16k -r 512k -r 1024k -r 16384k -i 0 -i 1 -i 2 Please be aware that some cards seem to need some time for auto calibration when being first used so please do the test at least two times and in case results improve repeat the test until results seem to be stable (please see the test linked above for my experiences with a few Samsung cards that needed 4 test runs and then some performance values were twice as good than before). When you're finished please execute 'armbianmonitor -u' to collect system information and post the support URL armbianmonitor provides, your test results and description of your board and the tested card in this thread. I'm especially interested in results of cards with different capacity so in case you've for example two SanDisk Extreme Plus (one with 8 and another with 32 GB) then results from both cards are interesting since performance might improve with higher capacity cards.
tkaiser Posted April 11, 2016 Author Posted April 11, 2016 BTW: Results for no-name cards or from manufacturers that only buy NAND dies and controllers from somewhere and put them together (Kingston, PNY, Sony and so on) aren't interesting since they take what they get at the spot markets and both quality and performance of cards that look identical might differ a lot. So collecting/publishing results for no-name cards or any other brand than the 4 listed above makes no sense (same applies also to buying these brands -- but that's another story )
zador.blood.stained Posted April 11, 2016 Posted April 11, 2016 Is there anything special about this image or I can use existing Armbian with similar settings (vanilla/performance)?
tkaiser Posted April 11, 2016 Author Posted April 11, 2016 You can use an existing image (vanilla, performance, cpufreq 960MHz). I created the test image only to ensure that inexperienced users are able to test with identical conditions (especially to ensure that no background jobs negatively influence performance).
Igor Posted April 11, 2016 Posted April 11, 2016 I prepared those , test board will be the same - Banana M1. I am getting few Samsung 32Mb EVO tomorrow and I have some more duplicates, some in use and no-names ... Test follows during evening. Most of cards are used.
Igor Posted April 11, 2016 Posted April 11, 2016 Transcend Premium 300x 16GB (almost new) http://sprunge.us/UcSD ext4: random random kB reclen write rewrite read reread read write 102400 4 2410 2501 6895 6892 6450 1553 102400 16 5530 5882 15385 15388 15056 2845 102400 512 11266 11187 22825 22825 22696 10355 102400 1024 12479 12674 22950 22952 22937 10549 102400 16384 12547 12928 22961 22962 22961 11600 102400 4 2369 2533 6837 6837 6713 1344 102400 16 5739 7179 15224 15254 14952 3906 102400 512 11598 12743 22810 22814 22698 9600 102400 1024 11270 11806 22924 22927 22819 9872 102400 16384 11796 11779 22966 22964 22937 11117 data: cid: 744a45555344553110458a05ea00eb79 csd: 400e00325b59000075cd7f800a4000c1 scr: 0235800300000000 date: 11/2014 name: USDU1 type: SD preferred_erase_size: 4194304 fwrev: 0x0 hwrev: 0x1 oemid: 0x4a45 manfid: 0x000074 serial: 0x458a05ea uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=USDU1 MODALIAS=mmc:block erase_size: 512 Sandisk Extreme Pro 8Gb (almost new) http://sprunge.us/aDJJ ext4: random random kB reclen write rewrite read reread read write 102400 4 2750 2872 8381 8380 8162 1241 102400 16 11780 12351 16092 16094 15059 3070 102400 512 20417 20061 22846 22844 22818 3025 102400 1024 19764 21301 23003 23004 22992 5912 102400 16384 19963 21291 22965 22962 22961 21269 102400 4 3000 3128 8375 8376 7938 1254 102400 16 11410 12340 16058 16062 15964 3202 102400 512 20292 20962 22710 22710 22690 3003 102400 1024 19709 21204 22888 22885 22879 5907 102400 16384 19959 21289 22959 22958 22960 21262 102400 4 2909 3042 8383 8386 8109 1251 102400 16 11399 12348 16081 16078 16039 3184 102400 512 20427 21082 22894 22891 22863 3004 102400 1024 19738 21260 22945 22947 22929 5910 102400 16384 19946 21283 22963 22969 22963 21272 data: cid: 0353445355303847800fa814ae00eb5f csd: 400e00325b5900003b377f800a4040af scr: 0235800300000000 date: 11/2014 name: SU08G type: SD preferred_erase_size: 4194304 fwrev: 0x0 hwrev: 0x8 oemid: 0x5344 manfid: 0x000003 serial: 0x0fa814ae uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SU08G MODALIAS=mmc:block erase_size: 512 Hardkernel eMMC 8G via SD reader (brand new) http://sprunge.us/SHXF ext4: random random kB reclen write rewrite read reread read write 102400 4 11485 12921 7044 7060 7010 11957 102400 16 17668 19117 17584 17579 17467 16706 102400 512 22711 22641 22962 22967 22942 21219 102400 1024 22800 22871 23056 23054 23041 22737 102400 16384 22803 22852 22990 22989 22989 22764 102400 4 11412 13181 7072 7085 7026 12612 102400 16 17577 17969 17587 17616 17482 18382 102400 512 22683 22809 22959 22956 22933 22360 102400 1024 21974 22807 22975 22979 22945 22645 102400 16384 22815 22832 22983 22984 22982 22800 102400 4 11367 13001 7073 7090 7033 12933 102400 16 17841 17579 17486 17522 17387 18909 102400 512 22635 22716 22875 22875 22848 22509 102400 1024 22602 22713 22967 22964 22946 22657 102400 16384 22762 22766 22986 22985 22984 22763 data: cid: 15010038474e44335201b5c3406d13c7 csd: d02701320f5903fff6dbffef8e40400d prv: 0x1 date: 01/2016 name: 8GND3R type: MMC rel_sectors: 0x1 preferred_erase_size: 524288 fwrev: 0x0100000000000000 hwrev: 0x0 oemid: 0x0100 enhanced_area_offset: 18446744073709551594 ffu_capable: 1 raw_rpmb_size_mult: 0x4 manfid: 0x000015 serial: 0xb5c3406d uevent: DRIVER=mmcblk MMC_TYPE=MMC MMC_NAME=8GND3R MODALIAS=mmc:block erase_size: 524288 enhanced_area_size: 4294967274 Sandisk Ultra 8Gb (old and very used) http://sprunge.us/OWZf ext4: random random kB reclen write rewrite read reread read write 102400 4 1353 1378 7139 7139 7127 687 102400 16 7825 7565 14797 14815 13876 54 102400 512 12511 14238 22759 22760 22691 1717 102400 1024 12623 14502 22917 22918 22878 3474 102400 16384 14251 13622 22925 22927 22923 14273 data: cid: 03534453553038478004add48400cc2b csd: 400e00325b5900003b377f800a4040af scr: 0235800100000000 date: 12/2012 name: SU08G type: SD preferred_erase_size: 4194304 fwrev: 0x0 hwrev: 0x8 oemid: 0x5344 manfid: 0x000003 serial: 0x04add484 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SU08G MODALIAS=mmc:block erase_size: 512 Sandisk 8GB (almost new) http://sprunge.us/iViT ext4: kB reclen write rewrite read reread read write 102400 4 2230 2207 7700 7700 7697 784 102400 16 6793 7338 15329 15352 14718 107 102400 512 8931 10596 22591 22595 22588 2741 102400 1024 9541 11083 22799 22796 22797 4491 102400 16384 9944 10954 22926 22929 22861 11421 102400 4 2356 2232 7793 7795 7773 750 102400 16 7570 7320 15445 15458 15445 109 102400 512 9057 10621 22734 22736 22688 2802 102400 1024 8573 10944 22827 22827 22789 5271 102400 16384 9400 11379 22922 22925 22923 10981 102400 4 2335 2375 7774 7773 7766 764 102400 16 7314 7066 15413 15431 15377 108 102400 512 8610 11666 22744 22742 22736 2718 102400 1024 8684 11466 22934 22934 22929 5547 102400 16384 9369 11400 22931 22934 22930 10761 data: cid: 035344534c303847804376351700f7db csd: 400e00325b5900003b377f800a4040af scr: 0235800100000000 date: 07/2015 name: SL08G type: SD preferred_erase_size: 4194304 fwrev: 0x0 hwrev: 0x8 oemid: 0x5344 manfid: 0x000003 serial: 0x43763517 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SL08G MODALIAS=mmc:block erase_size: 512 Transcend 8Gb (used) http://sprunge.us/NTRT ext4: kB reclen write rewrite read reread read write 102400 4 2190 2201 7646 7678 7279 780 102400 16 3705 5449 15554 15558 15410 1786 102400 512 6653 7261 20779 20847 20833 4779 102400 1024 7172 7548 20954 20951 20944 5887 102400 16384 7242 7138 20800 20937 20937 6983 102400 4 2259 2372 7645 7651 7529 841 102400 16 5418 6149 15722 15718 15509 2907 102400 512 6742 7474 20737 20812 20801 4822 102400 1024 7115 7074 20816 20881 20869 5988 102400 16384 6808 7155 20925 20953 20947 7255 data: cid: 744a45555344202002c9409e2f00ec63 csd: 400e00325b5900003bcd7f800a400041 scr: 0235800100000000 date: 12/2014 name: USD type: SD preferred_erase_size: 4194304 fwrev: 0x2 hwrev: 0x0 oemid: 0x4a45 manfid: 0x000074 serial: 0xc9409e2f uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=USD MODALIAS=mmc:block erase_size: 512 Sandisk 8G (new) http://sprunge.us/XHjj ext4: random random kB reclen write rewrite read reread read write 102400 4 1790 1849 8530 8527 8354 876 102400 16 7343 7431 16423 16456 15852 52 102400 512 12041 13073 22596 22596 22552 1652 102400 1024 12172 13216 22805 22807 22791 3319 102400 16384 13069 13276 22943 22943 22941 12862 102400 4 1954 2007 8586 8587 7975 876 102400 16 7331 7569 16417 16440 16364 52 102400 512 12179 13225 22738 22737 22726 1666 102400 1024 12312 13423 22949 22948 22943 3348 102400 16384 13184 13435 22952 22952 22952 13050 102400 4 1857 1914 8577 8579 8539 886 102400 16 7387 7649 16497 16526 16446 52 102400 512 12067 13103 22839 22846 22838 1650 102400 1024 12155 13263 22982 22985 22979 3315 102400 16384 13067 13240 22952 22954 22954 12874 data: cid: 035344534c3038478043a20b9a0103d7 csd: 400e00325b5900003b377f800a4040af scr: 0235800100000000 date: 03/2016 name: SL08G type: SD preferred_erase_size: 4194304 fwrev: 0x0 hwrev: 0x8 oemid: 0x5344 manfid: 0x000003 serial: 0x43a20b9a uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SL08G MODALIAS=mmc:block erase_size: 512 Samsung EVO 32Gb (brand new) http://sprunge.us/bTQh ext4: random random kB reclen write rewrite read reread read write 102400 4 2886 3256 7620 7627 7625 3419 102400 16 9870 10306 14685 14672 14687 9314 102400 512 21362 21398 22755 22758 22752 21462 102400 1024 21631 21666 22829 22832 22832 21719 102400 16384 21746 21789 22942 22944 22942 21768 102400 4 2675 3354 7636 7640 7641 3219 102400 16 11198 12135 14696 14688 14703 12177 102400 512 21368 21399 22773 22773 22766 21478 102400 1024 21639 21647 22852 22853 22853 21752 102400 16384 21665 21718 22902 22900 22900 21725 102400 4 3308 3373 7629 7639 7590 3433 102400 16 10232 12149 14696 14687 14700 12176 102400 512 21427 21458 22846 22850 22845 21565 102400 1024 21638 21727 22857 22857 22856 21726 102400 16384 21773 21742 22955 22952 22953 21729 data: cid: 1b534d3030303030107d4655c801022d csd: 400e00325b590000ee7f7f800a404055 scr: 02b5800200000000 date: 02/2016 name: 00000 type: SD preferred_erase_size: 4194304 fwrev: 0x0 hwrev: 0x1 oemid: 0x534d manfid: 0x00001b serial: 0x7d4655c8 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=00000 MODALIAS=mmc:block erase_size: 512 1
tkaiser Posted April 12, 2016 Author Posted April 12, 2016 Interesting. All the 'normal' SanDisk show the same ultra slow 16K random writes. And regarding this (random I/O writes) still the rather cheap Samsung EVOs seem to outperform the others. But the eMMC's random I/O performance is impressive (but it's still quite expensive, isn't it?) 1
Igor Posted April 12, 2016 Posted April 12, 2016 I just got EVO 32G and I'll add one <4 USD value no name which I bought in a bulk and most of cards are still operational. This eMMC absolutely rocks, its 18 USD @hardkernel store, but shipping is another 16 USD. Two more tests and then I am out of SD media
zador.blood.stained Posted April 12, 2016 Posted April 12, 2016 All 4 cards are not new, and since this took quite some time, I collected armbianmonitor link only from 1st run: http://sprunge.us/AQDT Filesystem is ext4 with default settings. Toshiba, class 4, 16GB random random kB reclen write rewrite read reread read write 102400 4 971 1100 7221 7221 5791 192 102400 16 3559 3659 11037 11037 10292 20 102400 512 4687 4382 21442 21449 21355 655 102400 1024 4709 4350 22101 22096 22048 1205 102400 16384 4728 4306 22277 22278 22276 3894 Transcend, class 10 UHS-I, 16GB random random kB reclen write rewrite read reread read write 102400 4 2226 2250 7267 7266 6742 1489 102400 16 4659 4886 14884 14876 14547 2088 102400 512 6788 8549 22407 22501 22473 3839 102400 1024 11504 11465 22723 22728 22613 7427 102400 16384 11528 11622 22776 22777 22734 10306 Transcend, class 10, 16GB random random kB reclen write rewrite read reread read write 102400 4 1920 2005 6793 6792 6390 9 102400 16 6091 6756 13037 14044 13913 39 102400 512 13613 16835 21565 21560 21550 984 102400 1024 13805 12534 21629 21630 21626 1840 102400 16384 15177 15171 21812 21814 21815 7579 Toshiba, class 10, 8 GB random random kB reclen write rewrite read reread read write 102400 4 1087 1095 2701 2739 2765 409 102400 16 5138 5274 8050 8029 8140 859 102400 512 10531 10347 21435 21246 21386 1335 102400 1024 10881 11036 22027 22097 22019 2714 102400 16384 10935 11036 21992 21988 22200 9003 1
lampra Posted April 17, 2016 Posted April 17, 2016 I tried the image on three different cards, written by dd on ubuntu and Win32diskimager on win10. Boot on cubietruck always hangs at: Waiting for root device /dev/mmcblk0p1... sunxi-mmc 1c12000.mmc: fatal err update clk timeout sunxi-mmc 1c12000.mmc: fatal err update clk timeout sunxi-mmc 1c12000.mmc: fatal err update clk timeout
tkaiser Posted April 17, 2016 Author Posted April 17, 2016 Thx for the feedback, might work if you can mount the card on another linux host and then replace the contents of /boot/dts/bananapipro.dtb with the cubietruck's.
rufik Posted April 18, 2016 Posted April 18, 2016 (edited) Samsung EVO 8GB, brand new (product code is MB-MP08DA/EU). Tested on Orange PI 2 with Armbian 5.05, result is third pass.HW info from armbianmonitor uploaded to http://sprunge.us/ZSAe random random kB reclen write rewrite read reread read write 102400 4 2553 2408 6655 6401 6536 869 102400 16 5178 6408 13537 14702 14471 2973 102400 512 10057 12545 21488 21479 21379 4620 102400 1024 10786 12381 22039 22048 21920 4870 102400 16384 10554 13053 22876 22882 22784 11635 Random write is slow, so I've made another 3 passes: random random kB reclen write rewrite read reread read write 102400 4 2511 2541 6667 6560 5515 825 102400 16 5574 6371 14359 14722 14431 3080 102400 512 7799 11571 21462 21362 20589 5318 102400 1024 9855 13432 21212 19704 21072 4263 102400 16384 12434 13181 22876 22876 22879 8501 random random kB reclen write rewrite read reread read write 102400 4 2260 1630 6388 6638 6233 951 102400 16 5950 6688 14327 14740 14318 3285 102400 512 9311 10406 19849 20909 20022 3888 102400 1024 12890 12057 22053 22053 21955 4407 102400 16384 9177 12686 22868 22876 22824 11339 random random kB reclen write rewrite read reread read write 102400 4 2200 1566 6410 6683 6164 904 102400 16 6012 7033 14437 14704 14169 2649 102400 512 7962 9815 21489 21360 20575 4009 102400 1024 9289 13453 22043 22037 21919 6692 102400 16384 11469 11671 22836 22869 22823 11764 More information about sd card: mmc0:59b4 info: cid: 1b534d3030303030105587061f00f283 csd: 400e00325b5900003bcd7f800a400041 scr: 0235800300000000 date: 02/2015 name: 00000 type: SD preferred_erase_size: 4194304 fwrev: 0x0 hwrev: 0x1 oemid: 0x534d manfid: 0x00001b serial: 0x5587061f uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=00000 MODALIAS=mmc:block erase_size: 512 Edited May 7, 2016 by wildcat_paris added spoiler tags
tkaiser Posted April 18, 2016 Author Posted April 18, 2016 Samsung EVO 8GB Thanks, can you please provide the output from 'sudo armbianmonitor -u' as well (that shows the card's metadata) and in case this card was brand new, try to repeat the test to see whether 4K writes get faster (at least that was the case with all new EVOs I tested with)
rufik Posted April 18, 2016 Posted April 18, 2016 Thanks, can you please provide the output from 'sudo armbianmonitor -u' as well (that shows the card's metadata) and in case this card was brand new, try to repeat the test to see whether 4K writes get faster (at least that was the case with all new EVOs I tested with) I've edited my post and it includes hwinfo now. I'll try to make another 3 passes of iozone and let you know about result...
tkaiser Posted April 18, 2016 Author Posted April 18, 2016 I'll try to make another 3 passes of iozone and let you know about result... Great! Unfortunately you use an older Armbian image, so please use the following script to extract SD card information and add it to the post. #!/bin/bash get_flash_information() { find /sys -name oemid | while read Device ; do DeviceNode="${Device%/*}" DeviceName="${DeviceNode##*/}" echo -e "${DeviceName} info:\n" find "${DeviceNode}" -maxdepth 1 -type f | while read ; do NodeName="${REPLY##*/}" echo -e "$(printf "%20s" ${NodeName}): $(cat "${DeviceNode}/${NodeName}" | tr '\n' " ")" done done } # get_flash_information get_flash_information
rufik Posted April 18, 2016 Posted April 18, 2016 Great! Unfortunately you use an older Armbian image, so please use the following script to extract SD card information and add it to the post. The result is: mmc0:59b4 info: cid: 1b534d3030303030105587061f00f283 csd: 400e00325b5900003bcd7f800a400041 scr: 0235800300000000 date: 02/2015 name: 00000 type: SD preferred_erase_size: 4194304 fwrev: 0x0 hwrev: 0x1 oemid: 0x534d manfid: 0x00001b serial: 0x5587061f uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=00000 MODALIAS=mmc:block erase_size: 512 Btw, there is no v5.06 for OPI 2 yet, right?
tkaiser Posted April 18, 2016 Author Posted April 18, 2016 Btw, there is no v5.06 for OPI 2 yet, right? Nope, but there will be a new release for all boards soon: http://forum.armbian.com/index.php/topic/881-prepare-v51-v201604/ BTW: If the EVO shows better values after more tests it would be good if you update the results. I'm still trying to figure out the capacity 'borders' for different storage media (smaller capacity is often associated with lower speeds but this is only true up to a specific capacity. For example the 32GB and 64GB EVO perform identical while those with smaller size show lower write speeds)
rufik Posted April 18, 2016 Posted April 18, 2016 BTW: If the EVO shows better values after more tests it would be good if you update the results. I'm still trying to figure out the capacity 'borders' for different storage media (smaller capacity is often associated with lower speeds but this is only true up to a specific capacity. For example the 32GB and 64GB EVO perform identical while those with smaller size show lower write speeds) Updated. Still the same. I've ordered Samsung EVO 16GB, so I will check it in next few days. You will have quite complete info through different capacities (8, 16, 32, 64GB).
lampra Posted April 19, 2016 Posted April 19, 2016 Thx for the feedback, might work if you can mount the card on another linux host and then replace the contents of /boot/dts/bananapipro.dtb with the cubietruck's. Well, i did the change and cubietruck booted but iozone hangs at the first random read. I will wait for the next release and i will report back here.
zador.blood.stained Posted April 19, 2016 Posted April 19, 2016 Well, i did the change and cubietruck booted but iozone hangs at the first random read. I will wait for the next release and i will report back here. If disk activity LED (green on cubietruck) is lit or it flashes, it didn't hang, it's testing. It may take more than an hour (or even 2 hours) to complete first set of tests.
tkaiser Posted April 19, 2016 Author Posted April 19, 2016 Well, i did the change and cubietruck booted but iozone hangs at the first random read. Well, iozone gives no feedback while doing a single test. I do always in another terminal an 'iostat 5' in parallel since this gives some feedback what really happens (requires an 'apt-get install sysstat' before). And as Zador pointed out. There are cards with very low random I/O performance where this test can take ages (but looking at iostat output you can estimate the duration already)
lampra Posted April 19, 2016 Posted April 19, 2016 If disk activity LED (green on cubietruck) is lit or it flashes, it didn't hang, it's testing. It may take more than an hour (or even 2 hours) to complete first set of tests. Well, iozone gives no feedback while doing a single test. I do always in another terminal an 'iostat 5' in parallel since this gives some feedback what really happens (requires an 'apt-get install sysstat' before). And as Zador pointed out. There are cards with very low random I/O performance where this test can take ages (but looking at iostat output you can estimate the duration already) Thank you for your patience and for the info. Here are the results for Samsung EVO 16GB, brand new (product code is MB-MP16DA/EU). Tested on Cubietruck with Armbian_5.07_Bananapipro_Debian_jessie_4.4.6 from the first post (adapted for cubietruck). Results from pass No 5, 6 & 7. random random kB reclen write rewrite read reread read write 102400 4 2284 1901 6650 6649 6529 1301 102400 16 6049 7126 15109 15155 14847 3901 102400 512 11508 11631 22368 22363 22225 10099 102400 1024 12100 12146 22732 22744 22633 10032 102400 16384 12230 12110 22785 22775 22776 11547 random random kB reclen write rewrite read reread read write 102400 4 2321 2261 6672 6669 6555 1305 102400 16 5903 6747 14956 15072 14742 3880 102400 512 11417 12308 22531 22533 22393 9858 102400 1024 11751 12030 22664 22663 22477 10231 102400 16384 12237 12145 22720 22717 22710 11300 random random kB reclen write rewrite read reread read write 102400 4 2310 2299 6679 6674 6562 1310 102400 16 6313 6716 15062 15140 14668 3962 102400 512 9232 11316 22431 22425 22291 9952 102400 1024 10457 12193 22704 22703 22568 9447 102400 16384 10818 12223 22712 22713 22662 11409 ### mmc0:59b4 info: cid: 1b534d3030303030106cc553f300fa8d csd: 400e00325b590000775d7f800a4000a3 scr: 0235800300000000 date: 10/2015 name: 00000 type: SD preferred_erase_size: 4194304 fwrev: 0x0 hwrev: 0x1 oemid: 0x534d manfid: 0x00001b serial: 0x6cc553f3 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=00000 MODALIAS=mmc:block erase_size: 512 HW info from armbianmonitor below (due to sprunge overquota) root@cubietruck:~# cat /var/log/armhwinfo.log Tue Apr 5 11:46:17 CEST 2016 sun7i armv7l Cubietech Cubietruck Cubietruck Linux version 4.4.6-sunxi (root@armbian) (gcc version 5.3.1 20160205 (Ubuntu/Linaro 5.3.1-8ubuntu2) ) #1 SMP Tue Apr 5 11:40:03 CEST 2016 ### dmesg: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.6-sunxi (root@armbian) (gcc version 5.3.1 20160205 (Ubuntu/Linaro 5.3.1-8ubuntu2) ) #1 SMP Tue Apr 5 11:40:03 CEST 2016 [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Cubietech Cubietruck [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 522263 [ 0.000000] free_area_init_node: node 0, pgdat c0c3b440, node_mem_map eee01000 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 325655 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] PERCPU: Embedded 13 pages/cpu @eedc5000 s23116 r8192 d21940 u53248 [ 0.000000] pcpu-alloc: s23116 r8192 d21940 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520535 [ 0.000000] Kernel command line: console=tty1 root=/dev/mmcblk0p1 rootwait rootfstype=ext4 cgroup_enable=memory swapaccount=1 sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_no_mali_mem_reserve sunxi_fb_mem_reserve=16 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2040328K/2089052K available (9165K kernel code, 634K rwdata, 2124K rodata, 604K init, 305K bss, 32340K reserved, 16384K cma-reserved, 1286236K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc0b0e764 (11290 kB) .init : 0xc0b0f000 - 0xc0ba6000 ( 604 kB) .data : 0xc0ba6000 - 0xc0c44860 ( 635 kB) .bss : 0xc0c47000 - 0xc0c93620 ( 306 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000022] Switching to timer-based delay loop, resolution 41ns [ 0.000542] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000798] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 12741736309 ns [ 0.001028] Console: colour dummy device 80x30 [ 0.001876] console [tty1] enabled [ 0.001923] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.001974] pid_max: default: 32768 minimum: 301 [ 0.002180] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002218] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003075] Initializing cgroup subsys io [ 0.003138] Initializing cgroup subsys memory [ 0.003194] Initializing cgroup subsys devices [ 0.003228] Initializing cgroup subsys freezer [ 0.003270] Initializing cgroup subsys net_cls [ 0.003303] Initializing cgroup subsys perf_event [ 0.003336] Initializing cgroup subsys net_prio [ 0.003427] CPU: Testing write buffer coherency: ok [ 0.003504] ftrace: allocating 28707 entries in 85 pages [ 0.053971] /cpus/cpu@0 missing clock-frequency property [ 0.054039] /cpus/cpu@1 missing clock-frequency property [ 0.054069] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.054191] Setting up static identity map for 0x400082c0 - 0x40008318 [ 0.056649] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.056764] Brought up 2 CPUs [ 0.056828] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.056851] CPU: All CPU(s) started in HYP mode. [ 0.056870] CPU: Virtualization extensions available. [ 0.057865] devtmpfs: initialized [ 0.067693] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 [ 0.068170] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.069384] xor: measuring software checksum speed [ 0.163656] arm4regs : 1130.000 MB/sec [ 0.263735] 8regs : 787.200 MB/sec [ 0.363807] 32regs : 764.400 MB/sec [ 0.463881] neon : 1139.600 MB/sec [ 0.463905] xor: using function: neon (1139.600 MB/sec) [ 0.464093] pinctrl core: initialized pinctrl subsystem [ 0.465500] NET: Registered protocol family 16 [ 0.466976] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.493967] cpuidle: using governor ladder [ 0.523994] cpuidle: using governor menu [ 0.532765] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.532822] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.714371] raid6: int32x1 gen() 159 MB/s [ 0.884623] raid6: int32x1 xor() 146 MB/s [ 1.054704] raid6: int32x2 gen() 192 MB/s [ 1.224919] raid6: int32x2 xor() 156 MB/s [ 1.395135] raid6: int32x4 gen() 198 MB/s [ 1.565276] raid6: int32x4 xor() 155 MB/s [ 1.735400] raid6: int32x8 gen() 185 MB/s [ 1.905556] raid6: int32x8 xor() 127 MB/s [ 2.075631] raid6: neonx1 gen() 447 MB/s [ 2.245800] raid6: neonx1 xor() 328 MB/s [ 2.416041] raid6: neonx2 gen() 587 MB/s [ 2.586163] raid6: neonx2 xor() 426 MB/s [ 2.756340] raid6: neonx4 gen() 651 MB/s [ 2.926492] raid6: neonx4 xor() 450 MB/s [ 3.096709] raid6: neonx8 gen() 616 MB/s [ 3.266865] raid6: neonx8 xor() 435 MB/s [ 3.266888] raid6: using algorithm neonx4 gen() 651 MB/s [ 3.266909] raid6: .... xor() 450 MB/s, rmw enabled [ 3.266929] raid6: using intx1 recovery algorithm [ 3.267381] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@1, deferring probe [ 3.267476] reg-fixed-voltage usb0-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_vbus_pin@0, deferring probe [ 3.267542] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 3.267607] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 3.269642] SCSI subsystem initialized [ 3.270049] libata version 3.00 loaded. [ 3.270424] usbcore: registered new interface driver usbfs [ 3.270526] usbcore: registered new interface driver hub [ 3.270631] usbcore: registered new device driver usb [ 3.270983] media: Linux media interface: v0.10 [ 3.271084] Linux video capture interface: v2.00 [ 3.271227] pps_core: LinuxPPS API ver. 1 registered [ 3.271253] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 3.271312] PTP clock support registered [ 3.273239] clocksource: Switched to clocksource arch_sys_counter [ 3.335052] simple-framebuffer bf817000.framebuffer: framebuffer at 0xbf817000, 0x7e9000 bytes, mapped to 0xf0900000 [ 3.335123] simple-framebuffer bf817000.framebuffer: format=x8r8g8b8, mode=1920x1080x32, linelength=7680 [ 3.372065] Console: switching to colour frame buffer device 240x67 [ 3.408004] simple-framebuffer bf817000.framebuffer: fb0: simplefb registered! [ 3.419425] NET: Registered protocol family 2 [ 3.420411] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 3.420729] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 3.421052] TCP: Hash tables configured (established 8192 bind 8192) [ 3.421354] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 3.421598] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 3.422121] NET: Registered protocol family 1 [ 3.422885] RPC: Registered named UNIX socket transport module. [ 3.423088] RPC: Registered udp transport module. [ 3.423296] RPC: Registered tcp transport module. [ 3.423442] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.424645] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 3.426354] futex hash table entries: 512 (order: 3, 32768 bytes) [ 3.427150] Initialise system trusted keyring [ 3.437007] zbud: loaded [ 3.440905] NFS: Registering the id_resolver key type [ 3.441162] Key type id_resolver registered [ 3.441293] Key type id_legacy registered [ 3.441440] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.441641] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 3.443682] JFS: nTxBlock = 8192, nTxLock = 65536 [ 3.455734] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 3.465034] bounce: pool size: 64 pages [ 3.465548] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 3.466004] io scheduler noop registered [ 3.466149] io scheduler deadline registered [ 3.466345] io scheduler cfq registered (default) [ 3.467022] sun4i-usb-phy 1c13400.phy: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_id_detect_pin@0, deferring probe [ 3.470564] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 3.548128] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 3.572073] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 44, base_baud = 1500000) is a U6_16550A [ 3.594057] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 45, base_baud = 1500000) is a U6_16550A [ 3.599979] brd: module loaded [ 3.608570] loop: module loaded [ 3.611238] sun7i-dwmac 1c50000.ethernet: no regulator found [ 3.611523] sun7i-dwmac 1c50000.ethernet: no reset control found [ 3.620858] Ring mode enabled [ 3.630070] No HW DMA feature register supported [ 3.630217] Normal descriptors [ 3.648589] TX Checksum insertion supported [ 3.662702] libphy: stmmac: probed [ 3.672087] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active [ 3.681391] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01) [ 3.690945] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.700131] ehci-platform: EHCI generic platform driver [ 3.709706] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.718822] ohci-platform: OHCI generic platform driver [ 3.728351] usbcore: registered new interface driver usb-storage [ 3.739172] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0 [ 3.748210] sunxi-rtc 1c20d00.rtc: RTC enabled [ 3.757209] i2c /dev entries driver [ 3.767377] axp20x 0-0034: AXP20x variant AXP209 found [ 3.789992] input: axp20x-pek as /devices/platform/soc@01c00000/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0 [ 3.806633] axp20x 0-0034: Battery detection is disabled, enabling [ 3.816749] axp20x 0-0034: Backup (RTC) battery charging is enabled [ 3.826233] axp20x 0-0034: AXP20X driver loaded [ 3.838735] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 3.849213] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found [ 3.859328] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 3.903519] sunxi-mmc 1c0f000.mmc: base:0xf08d6000 irq:26 [ 3.913499] sunxi-mmc 1c12000.mmc: No vqmmc regulator found [ 3.923404] sunxi-mmc 1c12000.mmc: allocated mmc-pwrseq [ 3.940655] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.952351] mmc0: new high speed SDHC card at address 59b4 [ 3.962286] mmcblk0: mmc0:59b4 00000 14.9 GiB [ 3.963324] sunxi-mmc 1c12000.mmc: base:0xf08da000 irq:27 [ 3.965180] ledtrig-cpu: registered to indicate activity on CPUs [ 3.965311] hidraw: raw HID events driver (C) Jiri Kosina [ 3.965530] usbcore: registered new interface driver usbhid [ 3.965533] usbhid: USB HID core driver [ 3.966923] Initializing XFRM netlink socket [ 3.968169] NET: Registered protocol family 10 [ 3.969673] NET: Registered protocol family 17 [ 3.969748] NET: Registered protocol family 15 [ 3.969820] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 3.969908] 8021q: 802.1Q VLAN Support v1.8 [ 3.969993] Key type dns_resolver registered [ 3.970742] Registering SWP/SWPB emulation handler [ 3.972111] registered taskstats version 1 [ 3.972133] Loading compiled-in X.509 certificates [ 3.972300] zswap: loaded using pool lzo/zbud [ 3.975989] Btrfs loaded [ 3.978010] Key type encrypted registered [ 4.043325] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 4.043396] ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan disabled [ 4.043435] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 4.043449] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc [ 4.044973] scsi host0: ahci-sunxi [ 4.045417] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 32 [ 4.045996] ehci-platform 1c14000.usb: EHCI Host Controller [ 4.046042] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 4.046347] ehci-platform 1c14000.usb: irq 29, io mem 0x01c14000 [ 4.063277] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 4.063639] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.063647] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.063654] usb usb1: Product: EHCI Host Controller [ 4.063661] usb usb1: Manufacturer: Linux 4.4.6-sunxi ehci_hcd [ 4.063666] usb usb1: SerialNumber: 1c14000.usb [ 4.064710] hub 1-0:1.0: USB hub found [ 4.064780] hub 1-0:1.0: 1 port detected [ 4.065807] ehci-platform 1c1c000.usb: EHCI Host Controller [ 4.065848] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 4.066217] ehci-platform 1c1c000.usb: irq 33, io mem 0x01c1c000 [ 4.083286] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 4.083598] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.083606] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.083612] usb usb2: Product: EHCI Host Controller [ 4.083619] usb usb2: Manufacturer: Linux 4.4.6-sunxi ehci_hcd [ 4.083626] usb usb2: SerialNumber: 1c1c000.usb [ 4.084630] hub 2-0:1.0: USB hub found [ 4.084692] hub 2-0:1.0: 1 port detected [ 4.085746] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 4.085803] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 4.086106] ohci-platform 1c14400.usb: irq 30, io mem 0x01c14400 [ 4.147582] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.147591] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.147597] usb usb3: Product: Generic Platform OHCI controller [ 4.147603] usb usb3: Manufacturer: Linux 4.4.6-sunxi ohci_hcd [ 4.147609] usb usb3: SerialNumber: 1c14400.usb [ 4.148618] hub 3-0:1.0: USB hub found [ 4.148685] hub 3-0:1.0: 1 port detected [ 4.149697] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 4.149739] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 4.150042] ohci-platform 1c1c400.usb: irq 34, io mem 0x01c1c400 [ 4.207504] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.207513] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.207519] usb usb4: Product: Generic Platform OHCI controller [ 4.207526] usb usb4: Manufacturer: Linux 4.4.6-sunxi ohci_hcd [ 4.207531] usb usb4: SerialNumber: 1c1c400.usb [ 4.208645] hub 4-0:1.0: USB hub found [ 4.208729] hub 4-0:1.0: 1 port detected [ 4.209832] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 4.210370] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 4.210378] musb-hdrc: MHDRC RTL version 0.0 [ 4.210395] musb-hdrc: 11/11 max ep, 5184/8192 memory [ 4.210554] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 4.210568] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5 [ 4.210953] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.210961] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.210968] usb usb5: Product: MUSB HDRC host driver [ 4.210974] usb usb5: Manufacturer: Linux 4.4.6-sunxi musb-hcd [ 4.210980] usb usb5: SerialNumber: musb-hdrc.1.auto [ 4.211961] hub 5-0:1.0: USB hub found [ 4.212026] hub 5-0:1.0: 1 port detected [ 4.393295] ata1: SATA link down (SStatus 0 SControl 300) [ 4.620214] mmcblk0: p1 [ 4.634951] sunxi-mmc 1c12000.mmc: smc 1 err, cmd 8, RTO !! [ 4.652348] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 4.661810] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.670310] vcc3v0: disabling [ 4.671529] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 4.674316] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 4.689924] mmc1: new high speed SDIO card at address 0001 [ 4.701721] vcc5v0: disabling [ 4.709895] usb0-vbus: disabling [ 4.730410] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.738480] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 4.749713] devtmpfs: mounted [ 4.758206] Freeing unused kernel memory: 604K (c0b0f000 - c0ba6000) [ 4.993319] usb 3-1: new low-speed USB device number 2 using ohci-platform [ 5.091385] random: systemd urandom read with 10 bits of entropy available [ 5.105553] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 5.114747] systemd[1]: Detected architecture 'arm'. [ 5.161843] systemd[1]: Set hostname to <bananapipro>. [ 5.217184] usb 3-1: New USB device found, idVendor=046d, idProduct=c315 [ 5.225642] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.233983] usb 3-1: Product: Logitech USB Keyboard [ 5.242231] usb 3-1: Manufacturer: Logitech [ 5.265153] input: Logitech Logitech USB Keyboard as /devices/platform/soc@01c00000/1c14400.usb/usb3/3-1/3-1:1.0/0003:046D:C315.0001/input/input1 [ 5.333737] hid-generic 0003:046D:C315.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-1c14400.usb-1/input0 [ 5.658075] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. [ 5.670679] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 5.680640] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.690029] systemd[1]: Expecting device dev-ttyS0.device... [ 5.709611] systemd[1]: Starting Remote File Systems (Pre). [ 5.729190] systemd[1]: Reached target Remote File Systems (Pre). [ 5.738835] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 5.748685] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.758293] systemd[1]: Starting Paths. [ 5.777937] systemd[1]: Reached target Paths. [ 5.787545] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 5.808454] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.818447] systemd[1]: Starting Encrypted Volumes. [ 5.839031] systemd[1]: Reached target Encrypted Volumes. [ 5.848998] systemd[1]: Starting Swap. [ 5.869457] systemd[1]: Reached target Swap. [ 5.879298] systemd[1]: Starting Root Slice. [ 5.899645] systemd[1]: Created slice Root Slice. [ 5.909472] systemd[1]: Starting User and Session Slice. [ 5.930196] systemd[1]: Created slice User and Session Slice. [ 5.940162] systemd[1]: Starting Delayed Shutdown Socket. [ 5.960786] systemd[1]: Listening on Delayed Shutdown Socket. [ 5.970666] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 5.991491] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 6.001518] systemd[1]: Starting Journal Socket (/dev/log). [ 6.022529] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.032769] systemd[1]: Starting udev Control Socket. [ 6.054021] systemd[1]: Listening on udev Control Socket. [ 6.064282] systemd[1]: Starting udev Kernel Socket. [ 6.085427] systemd[1]: Listening on udev Kernel Socket. [ 6.095756] systemd[1]: Starting Journal Socket. [ 6.117334] systemd[1]: Listening on Journal Socket. [ 6.127825] systemd[1]: Starting System Slice. [ 6.149655] systemd[1]: Created slice System Slice. [ 6.160071] systemd[1]: Starting File System Check on Root Device... [ 6.224189] systemd[1]: Starting system-serial\x2dgetty.slice. [ 6.247026] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 6.257677] systemd[1]: Starting system-getty.slice. [ 6.279321] systemd[1]: Created slice system-getty.slice. [ 6.289568] systemd[1]: Starting Increase datagram queue length... [ 6.314854] systemd[1]: Starting Restore / save the current clock... [ 6.345838] systemd[1]: Mounting Debug File System... [ 6.376443] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 6.412168] systemd[1]: Started Set Up Additional Binary Formats. [ 6.423035] systemd[1]: Starting udev Coldplug all Devices... [ 6.452245] systemd[1]: Mounting POSIX Message Queue File System... [ 6.558170] systemd[1]: Starting Load Kernel Modules... [ 6.624594] systemd[1]: Mounted Huge Pages File System. [ 6.634864] systemd[1]: Starting LSB: Set keymap... [ 6.658412] systemd[1]: Starting Slices. [ 6.679647] systemd[1]: Reached target Slices. [ 6.680017] fuse init (API version 7.23) [ 6.711787] systemd[1]: Mounted POSIX Message Queue File System. [ 6.731798] systemd[1]: Mounted Debug File System. [ 6.753629] systemd[1]: Started File System Check on Root Device. [ 6.781383] systemd[1]: Started Increase datagram queue length. [ 6.804941] systemd[1]: Started Restore / save the current clock. [ 6.817744] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 6.839172] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 6.898528] systemd[1]: Started Load Kernel Modules. [ 6.921531] systemd[1]: Started LSB: Set keymap. [ 6.937909] systemd[1]: Time has been changed [ 7.072445] systemd[1]: Started udev Coldplug all Devices. [ 7.115492] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d [ 7.149196] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code [ 7.197624] systemd[1]: Mounting FUSE Control File System... [ 7.254259] systemd[1]: Mounted Configuration File System. [ 7.264820] systemd[1]: Starting Apply Kernel Variables... [ 7.289454] systemd[1]: Starting Create Static Device Nodes in /dev... [ 7.314984] systemd[1]: Starting Syslog Socket. [ 7.337102] systemd[1]: Listening on Syslog Socket. [ 7.347074] systemd[1]: Starting Journal Service... [ 7.383571] systemd[1]: Started Journal Service. [ 7.543518] systemd-udevd[172]: starting version 215 [ 8.150913] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code [ 8.160238] cfg80211: World regulatory domain updated: [ 8.160250] cfg80211: DFS Master region: unset [ 8.160251] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 8.160270] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 8.160276] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 8.160282] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 8.160290] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 8.160297] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 8.160302] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 8.160307] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 8.160313] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 8.341986] sun4i-ss 1c15000.crypto-engine: no reset control found [ 8.352559] sun4i-ss 1c15000.crypto-engine: Die ID 0 [ 8.593539] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok [ 14.925629] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro [ 15.457441] systemd-journald[170]: Received request to flush runtime journal from PID 1 [ 16.094156] RX IPC Checksum Offload disabled [ 16.102336] No MAC Management Counters available [ 21.073670] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off ### lsusb: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 4.04 iManufacturer 3 Linux 4.4.6-sunxi ohci_hcd iProduct 2 Generic Platform OHCI controller iSerial 1 1c1c400.usb bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 1 wHubCharacteristic 0x0012 No power switching (usb 1.0) No overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Device Status: 0x0001 Self Powered Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 4.04 iManufacturer 3 Linux 4.4.6-sunxi ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 1c1c000.usb bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 1 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Device Status: 0x0001 Self Powered Bus 003 Device 002: ID 046d:c315 Logitech, Inc. Classic Keyboard 200 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x046d Logitech, Inc. idProduct 0xc315 Classic Keyboard 200 bcdDevice 28.00 iManufacturer 1 Logitech iProduct 2 Logitech USB Keyboard iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 64 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 4.04 iManufacturer 3 Linux 4.4.6-sunxi ohci_hcd iProduct 2 Generic Platform OHCI controller iSerial 1 1c14400.usb bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 1 wHubCharacteristic 0x0012 No power switching (usb 1.0) No overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0303 lowspeed power enable connect Device Status: 0x0001 Self Powered Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 4.04 iManufacturer 3 Linux 4.4.6-sunxi ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 1c14000.usb bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 1 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Device Status: 0x0001 Self Powered Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 4.04 iManufacturer 3 Linux 4.4.6-sunxi musb-hcd iProduct 2 MUSB HDRC host driver iSerial 1 musb-hdrc.1.auto bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 1 wHubCharacteristic 0x0011 Per-port power switching No overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 5 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x02 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0104 power suspend Device Status: 0x0001 Self Powered ### lscpu: Architecture: armv7l Byte Order: Little Endian CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 Model name: ARMv7 Processor rev 4 (v7l) CPU max MHz: 960.0000 CPU min MHz: 144.0000 ### cpuinfo: processor : 0 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 50.52 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 4 processor : 1 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 50.52 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 4 Hardware : Allwinner sun7i (A20) Family Revision : 0000 Serial : 1651660407c15e08 ### meminfo: MemTotal: 2057316 kB MemFree: 1969620 kB MemAvailable: 1995104 kB Buffers: 6724 kB Cached: 37284 kB SwapCached: 0 kB Active: 33780 kB Inactive: 23932 kB Active(anon): 13884 kB Inactive(anon): 9484 kB Active(file): 19896 kB Inactive(file): 14448 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1302620 kB HighFree: 1257272 kB LowTotal: 754696 kB LowFree: 712348 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 196 kB Writeback: 0 kB AnonPages: 13744 kB Mapped: 10632 kB Shmem: 9668 kB Slab: 16172 kB SReclaimable: 8180 kB SUnreclaim: 7992 kB KernelStack: 776 kB PageTables: 400 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1028656 kB Committed_AS: 57968 kB VmallocTotal: 245760 kB VmallocUsed: 0 kB VmallocChunk: 0 kB CmaTotal: 16384 kB CmaFree: 14960 kB ### interrupts: CPU0 CPU1 17: 0 0 GIC 29 Edge arch_timer 18: 2232 2118 GIC 30 Edge arch_timer 21: 0 0 GIC 54 Level sun4i_timer0 22: 0 0 GIC 113 Level sun5i_timer0 25: 0 0 GIC 59 Level 1c02000.dma-controller 26: 2094 0 GIC 64 Level sunxi-mmc 27: 5347 0 GIC 67 Level sunxi-mmc 28: 0 0 GIC 70 Level musb-hdrc.1.auto 29: 2 0 GIC 71 Level ehci_hcd:usb1 30: 40 0 GIC 96 Level ohci_hcd:usb3 32: 0 0 GIC 88 Level 1c18000.sata 33: 0 0 GIC 72 Level ehci_hcd:usb2 34: 0 0 GIC 97 Level ohci_hcd:usb4 37: 0 0 GIC 56 Level 1c20d00.rtc 43: 8 0 GIC 61 Level sun4i-ts 46: 282 0 GIC 39 Level mv64xxx_i2c 47: 0 0 GIC 40 Level mv64xxx_i2c 48: 0 0 GIC 41 Level mv64xxx_i2c 49: 0 1 GIC 117 Level eth0 55: 0 0 sunxi_pio_edge 1 Edge 1c0f000.mmc cd 64: 44 0 sunxi_pio_level 10 Level brcmf_oob_intr 73: 1 0 sunxi_pio_edge 19 Edge usb0-id-det 86: 0 0 sunxi-nmi 0 Level axp20x_irq_chip 120: 0 0 axp20x_irq_chip 33 Edge axp20x-pek-dbr 121: 0 0 axp20x_irq_chip 34 Edge axp20x-pek-dbf IPI0: 0 0 CPU wakeup interrupts IPI1: 0 0 Timer broadcast interrupts IPI2: 1703 7348 Rescheduling interrupts IPI3: 0 0 Function call interrupts IPI4: 3 11 Single function call interrupts IPI5: 0 0 CPU stop interrupts IPI6: 0 0 IRQ work interrupts IPI7: 0 0 completion interrupts Err: 0 ### ifconfig: eth0 Link encap:Ethernet HWaddr 02:04:07:c1:5e:08 inet6 addr: fe80::4:7ff:fec1:5e08/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:60 (60.0 TX bytes:920 (920.0 Interrupt:49 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:0 (0.0 TX bytes:0 (0.0 ### df: Filesystem Size Used Avail Use% Mounted on /dev/root 1.3G 918M 234M 80% / devtmpfs 997M 0 997M 0% /dev tmpfs 1005M 0 1005M 0% /dev/shm tmpfs 1005M 9.5M 996M 1% /run tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 1005M 0 1005M 0% /sys/fs/cgroup tmpfs 1005M 28K 1005M 1% /tmp ### mmc0:59b4 info: cid: 1b534d3030303030106cc553f300fa8d csd: 400e00325b590000775d7f800a4000a3 scr: 0235800300000000 date: 10/2015 name: 00000 type: SD preferred_erase_size: 4194304 fwrev: 0x0 hwrev: 0x1 oemid: 0x534d manfid: 0x00001b serial: 0x6cc553f3 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=00000 MODALIAS=mmc:block erase_size: 512 Wed Apr 20 00:17:25 CEST 2016 sun7i armv7l Cubietech Cubietruck Cubietruck Linux version 4.4.6-sunxi (root@armbian) (gcc version 5.3.1 20160205 (Ubuntu/Linaro 5.3.1-8ubuntu2) ) #1 SMP Tue Apr 5 11:40:03 CEST 2016 ### dmesg: [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.6-sunxi (root@armbian) (gcc version 5.3.1 20160205 (Ubuntu/Linaro 5.3.1-8ubuntu2) ) #1 SMP Tue Apr 5 11:40:03 CEST 2016 [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Cubietech Cubietruck [ 0.000000] cma: Reserved 16 MiB at 0xbe800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 522263 [ 0.000000] free_area_init_node: node 0, pgdat c0c3b440, node_mem_map eee01000 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 196608 pages, LIFO batch:31 [ 0.000000] HighMem zone: 325655 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT [ 0.000000] PERCPU: Embedded 13 pages/cpu @eedc5000 s23116 r8192 d21940 u53248 [ 0.000000] pcpu-alloc: s23116 r8192 d21940 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520535 [ 0.000000] Kernel command line: console=tty1 root=/dev/mmcblk0p1 rootwait rootfstype=ext4 cgroup_enable=memory swapaccount=1 sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_no_mali_mem_reserve sunxi_fb_mem_reserve=16 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 enforcing=0 loglevel=1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 2040328K/2089052K available (9165K kernel code, 634K rwdata, 2124K rodata, 604K init, 305K bss, 32340K reserved, 16384K cma-reserved, 1286236K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc0b0e764 (11290 kB) .init : 0xc0b0f000 - 0xc0ba6000 ( 604 kB) .data : 0xc0ba6000 - 0xc0c44860 ( 635 kB) .bss : 0xc0c47000 - 0xc0c93620 ( 306 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000021] Switching to timer-based delay loop, resolution 41ns [ 0.000544] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000795] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 12741736309 ns [ 0.001027] Console: colour dummy device 80x30 [ 0.001193] console [tty1] enabled [ 0.001225] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.001241] pid_max: default: 32768 minimum: 301 [ 0.001432] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001447] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002289] Initializing cgroup subsys io [ 0.002326] Initializing cgroup subsys memory [ 0.002363] Initializing cgroup subsys devices [ 0.002381] Initializing cgroup subsys freezer [ 0.002409] Initializing cgroup subsys net_cls [ 0.002425] Initializing cgroup subsys perf_event [ 0.002440] Initializing cgroup subsys net_prio [ 0.002509] CPU: Testing write buffer coherency: ok [ 0.002566] ftrace: allocating 28707 entries in 85 pages [ 0.052943] /cpus/cpu@0 missing clock-frequency property [ 0.052982] /cpus/cpu@1 missing clock-frequency property [ 0.052997] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.053101] Setting up static identity map for 0x400082c0 - 0x40008318 [ 0.055515] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.055632] Brought up 2 CPUs [ 0.055658] SMP: Total of 2 processors activated (96.00 BogoMIPS). [ 0.055666] CPU: All CPU(s) started in HYP mode. [ 0.055671] CPU: Virtualization extensions available. [ 0.056665] devtmpfs: initialized [ 0.066476] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 [ 0.066916] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.068067] xor: measuring software checksum speed [ 0.162608] arm4regs : 1130.400 MB/sec [ 0.262686] 8regs : 787.600 MB/sec [ 0.362764] 32regs : 764.800 MB/sec [ 0.462841] neon : 1142.000 MB/sec [ 0.462850] xor: using function: neon (1142.000 MB/sec) [ 0.463028] pinctrl core: initialized pinctrl subsystem [ 0.464468] NET: Registered protocol family 16 [ 0.466033] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.495897] cpuidle: using governor ladder [ 0.522948] cpuidle: using governor menu [ 0.531660] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.531680] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.703310] raid6: int32x1 gen() 159 MB/s [ 0.873560] raid6: int32x1 xor() 146 MB/s [ 1.043636] raid6: int32x2 gen() 192 MB/s [ 1.213829] raid6: int32x2 xor() 156 MB/s [ 1.384070] raid6: int32x4 gen() 198 MB/s [ 1.554236] raid6: int32x4 xor() 155 MB/s [ 1.724334] raid6: int32x8 gen() 185 MB/s [ 1.894508] raid6: int32x8 xor() 127 MB/s [ 2.064559] raid6: neonx1 gen() 447 MB/s [ 2.234780] raid6: neonx1 xor() 328 MB/s [ 2.404954] raid6: neonx2 gen() 587 MB/s [ 2.575092] raid6: neonx2 xor() 426 MB/s [ 2.745258] raid6: neonx4 gen() 651 MB/s [ 2.915437] raid6: neonx4 xor() 450 MB/s [ 3.085619] raid6: neonx8 gen() 616 MB/s [ 3.255775] raid6: neonx8 xor() 435 MB/s [ 3.255783] raid6: using algorithm neonx4 gen() 651 MB/s [ 3.255790] raid6: .... xor() 450 MB/s, rmw enabled [ 3.255797] raid6: using intx1 recovery algorithm [ 3.256212] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@1, deferring probe [ 3.256271] reg-fixed-voltage usb0-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_vbus_pin@0, deferring probe [ 3.256307] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 3.256340] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 3.258277] SCSI subsystem initialized [ 3.258648] libata version 3.00 loaded. [ 3.259032] usbcore: registered new interface driver usbfs [ 3.259118] usbcore: registered new interface driver hub [ 3.259214] usbcore: registered new device driver usb [ 3.259568] media: Linux media interface: v0.10 [ 3.259646] Linux video capture interface: v2.00 [ 3.259754] pps_core: LinuxPPS API ver. 1 registered [ 3.259765] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 3.259795] PTP clock support registered [ 3.261715] clocksource: Switched to clocksource arch_sys_counter [ 3.323535] simple-framebuffer bf817000.framebuffer: framebuffer at 0xbf817000, 0x7e9000 bytes, mapped to 0xf0900000 [ 3.323562] simple-framebuffer bf817000.framebuffer: format=x8r8g8b8, mode=1920x1080x32, linelength=7680 [ 3.360439] Console: switching to colour frame buffer device 240x67 [ 3.396207] simple-framebuffer bf817000.framebuffer: fb0: simplefb registered! [ 3.407533] NET: Registered protocol family 2 [ 3.408364] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 3.408468] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 3.408595] TCP: Hash tables configured (established 8192 bind 8192) [ 3.408712] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 3.408783] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 3.409111] NET: Registered protocol family 1 [ 3.409731] RPC: Registered named UNIX socket transport module. [ 3.409749] RPC: Registered udp transport module. [ 3.409755] RPC: Registered tcp transport module. [ 3.409762] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.410803] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 3.412441] futex hash table entries: 512 (order: 3, 32768 bytes) [ 3.413053] Initialise system trusted keyring [ 3.422681] zbud: loaded [ 3.426527] NFS: Registering the id_resolver key type [ 3.426607] Key type id_resolver registered [ 3.426615] Key type id_legacy registered [ 3.426645] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 3.426659] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 3.428386] JFS: nTxBlock = 8192, nTxLock = 65536 [ 3.440134] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 3.449108] bounce: pool size: 64 pages [ 3.449473] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 3.449689] io scheduler noop registered [ 3.449709] io scheduler deadline registered [ 3.449776] io scheduler cfq registered (default) [ 3.450327] sun4i-usb-phy 1c13400.phy: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_id_detect_pin@0, deferring probe [ 3.453717] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 3.530911] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 3.554814] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 44, base_baud = 1500000) is a U6_16550A [ 3.576478] 1c28800.serial: ttyS2 at MMIO 0x1c28800 (irq = 45, base_baud = 1500000) is a U6_16550A [ 3.582085] brd: module loaded [ 3.590276] loop: module loaded [ 3.593122] sun7i-dwmac 1c50000.ethernet: no regulator found [ 3.593226] sun7i-dwmac 1c50000.ethernet: no reset control found [ 3.593240] Ring mode enabled [ 3.593250] No HW DMA feature register supported [ 3.593257] Normal descriptors [ 3.593263] TX Checksum insertion supported [ 3.598026] libphy: stmmac: probed [ 3.598048] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active [ 3.598058] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01) [ 3.598469] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.598489] ehci-platform: EHCI generic platform driver [ 3.598949] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.598997] ohci-platform: OHCI generic platform driver [ 3.599429] usbcore: registered new interface driver usb-storage [ 3.601078] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0 [ 3.601098] sunxi-rtc 1c20d00.rtc: RTC enabled [ 3.601259] i2c /dev entries driver [ 3.602620] axp20x 0-0034: AXP20x variant AXP209 found [ 3.616173] input: axp20x-pek as /devices/platform/soc@01c00000/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0 [ 3.623679] axp20x 0-0034: Backup (RTC) battery charging is enabled [ 3.623913] axp20x 0-0034: AXP20X driver loaded [ 3.627095] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 3.627949] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found [ 3.628644] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 3.661975] sunxi-mmc 1c0f000.mmc: base:0xf08d6000 irq:26 [ 3.662596] sunxi-mmc 1c12000.mmc: No vqmmc regulator found [ 3.663277] sunxi-mmc 1c12000.mmc: allocated mmc-pwrseq [ 3.698961] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.701392] mmc0: new high speed SDHC card at address 59b4 [ 3.701786] sunxi-mmc 1c12000.mmc: base:0xf08da000 irq:27 [ 3.702523] mmcblk0: mmc0:59b4 00000 14.9 GiB [ 3.703632] ledtrig-cpu: registered to indicate activity on CPUs [ 3.703775] hidraw: raw HID events driver (C) Jiri Kosina [ 3.703975] usbcore: registered new interface driver usbhid [ 3.703983] usbhid: USB HID core driver [ 3.704374] mmcblk0: p1 [ 3.705484] Initializing XFRM netlink socket [ 3.706815] NET: Registered protocol family 10 [ 3.708220] NET: Registered protocol family 17 [ 3.708276] NET: Registered protocol family 15 [ 3.708389] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 3.708499] 8021q: 802.1Q VLAN Support v1.8 [ 3.708580] Key type dns_resolver registered [ 3.709276] Registering SWP/SWPB emulation handler [ 3.710360] registered taskstats version 1 [ 3.710392] Loading compiled-in X.509 certificates [ 3.710551] zswap: loaded using pool lzo/zbud [ 3.711260] sunxi-mmc 1c12000.mmc: smc 1 err, cmd 8, RTO !! [ 3.714244] Btrfs loaded [ 3.716136] Key type encrypted registered [ 3.721337] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 3.722973] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 3.724475] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 3.727163] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 3.742604] mmc1: new high speed SDIO card at address 0001 [ 3.781772] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP [ 3.781832] ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan disabled [ 3.781867] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 3.781884] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc [ 3.783202] scsi host0: ahci-sunxi [ 3.783616] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 32 [ 3.784137] ehci-platform 1c14000.usb: EHCI Host Controller [ 3.784210] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1 [ 3.784507] ehci-platform 1c14000.usb: irq 29, io mem 0x01c14000 [ 3.801734] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 3.802137] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.802153] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.802163] usb usb1: Product: EHCI Host Controller [ 3.802173] usb usb1: Manufacturer: Linux 4.4.6-sunxi ehci_hcd [ 3.802182] usb usb1: SerialNumber: 1c14000.usb [ 3.803197] hub 1-0:1.0: USB hub found [ 3.803296] hub 1-0:1.0: 1 port detected [ 3.804255] ehci-platform 1c1c000.usb: EHCI Host Controller [ 3.804308] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 3.804590] ehci-platform 1c1c000.usb: irq 33, io mem 0x01c1c000 [ 3.821734] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 3.822073] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.822088] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.822098] usb usb2: Product: EHCI Host Controller [ 3.822108] usb usb2: Manufacturer: Linux 4.4.6-sunxi ehci_hcd [ 3.822118] usb usb2: SerialNumber: 1c1c000.usb [ 3.823011] hub 2-0:1.0: USB hub found [ 3.823091] hub 2-0:1.0: 1 port detected [ 3.824026] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 3.824089] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 3.824349] ohci-platform 1c14400.usb: irq 30, io mem 0x01c14400 [ 3.886058] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.886075] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.886085] usb usb3: Product: Generic Platform OHCI controller [ 3.886095] usb usb3: Manufacturer: Linux 4.4.6-sunxi ohci_hcd [ 3.886104] usb usb3: SerialNumber: 1c14400.usb [ 3.886993] hub 3-0:1.0: USB hub found [ 3.887079] hub 3-0:1.0: 1 port detected [ 3.888076] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 3.888124] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 3.888372] ohci-platform 1c1c400.usb: irq 34, io mem 0x01c1c400 [ 3.946041] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.946059] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.946069] usb usb4: Product: Generic Platform OHCI controller [ 3.946080] usb usb4: Manufacturer: Linux 4.4.6-sunxi ohci_hcd [ 3.946089] usb usb4: SerialNumber: 1c1c400.usb [ 3.947026] hub 4-0:1.0: USB hub found [ 3.947114] hub 4-0:1.0: 1 port detected [ 3.948175] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 3.948602] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 3.948619] musb-hdrc: MHDRC RTL version 0.0 [ 3.948639] musb-hdrc: 11/11 max ep, 5184/8192 memory [ 3.948800] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 3.948818] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5 [ 3.949247] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.949264] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.949274] usb usb5: Product: MUSB HDRC host driver [ 3.949284] usb usb5: Manufacturer: Linux 4.4.6-sunxi musb-hcd [ 3.949294] usb usb5: SerialNumber: musb-hdrc.1.auto [ 3.950140] hub 5-0:1.0: USB hub found [ 3.950228] hub 5-0:1.0: 1 port detected [ 3.978013] vcc3v0: disabling [ 3.978051] vcc5v0: disabling [ 3.978594] usb0-vbus: disabling [ 4.131731] ata1: SATA link down (SStatus 0 SControl 300) [ 4.177545] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.177636] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 4.182216] devtmpfs: mounted [ 4.182957] Freeing unused kernel memory: 604K (c0b0f000 - c0ba6000) [ 4.401818] usb 3-1: new low-speed USB device number 2 using ohci-platform [ 4.556833] random: systemd urandom read with 10 bits of entropy available [ 4.562950] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 4.563413] systemd[1]: Detected architecture 'arm'. [ 4.577282] systemd[1]: Set hostname to <cubietruck>. [ 4.624825] usb 3-1: New USB device found, idVendor=046d, idProduct=c315 [ 4.624851] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.624862] usb 3-1: Product: Logitech USB Keyboard [ 4.624873] usb 3-1: Manufacturer: Logitech [ 4.635317] input: Logitech Logitech USB Keyboard as /devices/platform/soc@01c00000/1c14400.usb/usb3/3-1/3-1:1.0/0003:046D:C315.0001/input/input1 [ 4.692213] hid-generic 0003:046D:C315.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-1c14400.usb-1/input0 [ 5.037059] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. [ 5.040288] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 5.040809] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 5.040928] systemd[1]: Expecting device dev-ttyS0.device... [ 5.041823] systemd[1]: Starting Remote File Systems (Pre). [ 5.042417] systemd[1]: Reached target Remote File Systems (Pre). [ 5.042627] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. [ 5.042952] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 5.043036] systemd[1]: Starting Paths. [ 5.043532] systemd[1]: Reached target Paths. [ 5.043737] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 5.045082] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 5.045218] systemd[1]: Starting Encrypted Volumes. [ 5.045736] systemd[1]: Reached target Encrypted Volumes. [ 5.045846] systemd[1]: Starting Root Slice. [ 5.046435] systemd[1]: Created slice Root Slice. [ 5.046527] systemd[1]: Starting User and Session Slice. [ 5.047274] systemd[1]: Created slice User and Session Slice. [ 5.047370] systemd[1]: Starting Delayed Shutdown Socket. [ 5.048073] systemd[1]: Listening on Delayed Shutdown Socket. [ 5.048172] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 5.048916] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 5.049008] systemd[1]: Starting Journal Socket (/dev/log). [ 5.049710] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.049857] systemd[1]: Starting udev Control Socket. [ 5.050548] systemd[1]: Listening on udev Control Socket. [ 5.050678] systemd[1]: Starting udev Kernel Socket. [ 5.051253] systemd[1]: Listening on udev Kernel Socket. [ 5.051386] systemd[1]: Starting Journal Socket. [ 5.052200] systemd[1]: Listening on Journal Socket. [ 5.052426] systemd[1]: Starting System Slice. [ 5.053279] systemd[1]: Created slice System Slice. [ 5.053496] systemd[1]: Starting File System Check on Root Device... [ 5.092658] systemd[1]: Starting system-serial\x2dgetty.slice. [ 5.093960] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 5.094164] systemd[1]: Starting system-getty.slice. [ 5.095278] systemd[1]: Created slice system-getty.slice. [ 5.095673] systemd[1]: Starting Increase datagram queue length... [ 5.100182] systemd[1]: Starting Restore / save the current clock... [ 5.111290] systemd[1]: Mounting Debug File System... [ 5.116822] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 5.142650] systemd[1]: Started Set Up Additional Binary Formats. [ 5.142947] systemd[1]: Starting udev Coldplug all Devices... [ 5.148513] systemd[1]: Mounting POSIX Message Queue File System... [ 5.204065] systemd[1]: Starting Load Kernel Modules... [ 5.208418] systemd[1]: Mounted Huge Pages File System. [ 5.208654] systemd[1]: Starting LSB: Set keymap... [ 5.222131] systemd[1]: Starting Slices. [ 5.222783] systemd[1]: Reached target Slices. [ 5.226818] systemd[1]: Mounted POSIX Message Queue File System. [ 5.227651] systemd[1]: Mounted Debug File System. [ 5.230192] systemd[1]: Started Increase datagram queue length. [ 5.250924] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 5.277272] systemd[1]: Started LSB: Set keymap. [ 5.292529] fuse init (API version 7.23) [ 5.307472] systemd[1]: Started File System Check on Root Device. [ 5.376956] systemd[1]: Started Restore / save the current clock. [ 5.387572] systemd[1]: Time has been changed [ 5.446548] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 5.459221] systemd[1]: Started Load Kernel Modules. [ 5.485982] systemd[1]: Started udev Coldplug all Devices. [ 5.526030] systemd[1]: Mounting FUSE Control File System... [ 5.552797] systemd[1]: Mounted Configuration File System. [ 5.553089] systemd[1]: Starting Apply Kernel Variables... [ 5.558039] systemd[1]: Starting Create Static Device Nodes in /dev... [ 5.563560] systemd[1]: Starting Syslog Socket. [ 5.564710] systemd[1]: Listening on Syslog Socket. [ 5.564947] systemd[1]: Starting Journal Service... [ 5.570598] systemd[1]: Started Journal Service. [ 5.717308] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d [ 5.739093] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code [ 5.784353] systemd-udevd[172]: starting version 215 [ 6.288807] sun4i-ss 1c15000.crypto-engine: no reset control found [ 6.290382] sun4i-ss 1c15000.crypto-engine: Die ID 0 [ 6.367248] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code [ 6.367290] cfg80211: World regulatory domain updated: [ 6.367300] cfg80211: DFS Master region: unset [ 6.367310] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 6.367322] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6.367331] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 6.367341] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 6.367352] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 6.367363] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 6.367373] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 6.367382] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 6.367391] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 6.598254] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok [ 6.844694] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro [ 7.244200] Adding 131068k swap on /var/swap. Priority:-1 extents:2 across:139260k SSFS [ 7.277889] random: nonblocking pool is initialized [ 7.370951] systemd-journald[168]: Received request to flush runtime journal from PID 1 [ 9.282753] RX IPC Checksum Offload disabled [ 9.282784] No MAC Management Counters available [ 15.272160] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off ### lsusb: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 046d:c315 Logitech, Inc. Classic Keyboard 200 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ### lscpu: Architecture: armv7l Byte Order: Little Endian CPU(s): 2 On-line CPU(s) list: 0,1 Thread(s) per core: 1 Core(s) per socket: 2 Socket(s): 1 Model name: ARMv7 Processor rev 4 (v7l) CPU max MHz: 960.0000 CPU min MHz: 144.0000 ### cpuinfo: processor : 0 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 50.52 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 4 processor : 1 model name : ARMv7 Processor rev 4 (v7l) BogoMIPS : 50.52 Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 4 Hardware : Allwinner sun7i (A20) Family Revision : 0000 Serial : 1651660407c15e08 ### meminfo: MemTotal: 2057316 kB MemFree: 1972140 kB MemAvailable: 1995108 kB Buffers: 5796 kB Cached: 35504 kB SwapCached: 0 kB Active: 31376 kB Inactive: 23412 kB Active(anon): 13676 kB Inactive(anon): 9472 kB Active(file): 17700 kB Inactive(file): 13940 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1302620 kB HighFree: 1260760 kB LowTotal: 754696 kB LowFree: 711380 kB SwapTotal: 131068 kB SwapFree: 131068 kB Dirty: 148 kB Writeback: 0 kB AnonPages: 13456 kB Mapped: 9596 kB Shmem: 9664 kB Slab: 16772 kB SReclaimable: 8560 kB SUnreclaim: 8212 kB KernelStack: 760 kB PageTables: 280 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1159724 kB Committed_AS: 56020 kB VmallocTotal: 245760 kB VmallocUsed: 0 kB VmallocChunk: 0 kB CmaTotal: 16384 kB CmaFree: 14960 kB ### interrupts: CPU0 CPU1 17: 0 0 GIC 29 Edge arch_timer 18: 1742 1499 GIC 30 Edge arch_timer 21: 0 0 GIC 54 Level sun4i_timer0 22: 0 0 GIC 113 Level sun5i_timer0 25: 0 0 GIC 59 Level 1c02000.dma-controller 26: 14093 0 GIC 64 Level sunxi-mmc 27: 5684 0 GIC 67 Level sunxi-mmc 28: 0 0 GIC 70 Level musb-hdrc.1.auto 29: 2 0 GIC 71 Level ehci_hcd:usb1 30: 28 0 GIC 96 Level ohci_hcd:usb3 32: 0 0 GIC 88 Level 1c18000.sata 33: 0 0 GIC 72 Level ehci_hcd:usb2 34: 0 0 GIC 97 Level ohci_hcd:usb4 37: 0 0 GIC 56 Level 1c20d00.rtc 43: 11 0 GIC 61 Level sun4i-ts 46: 278 0 GIC 39 Level mv64xxx_i2c 47: 0 0 GIC 40 Level mv64xxx_i2c 48: 0 0 GIC 41 Level mv64xxx_i2c 49: 25 0 GIC 117 Level eth0 55: 0 0 sunxi_pio_edge 1 Edge 1c0f000.mmc cd 64: 43 0 sunxi_pio_level 10 Level brcmf_oob_intr 73: 1 0 sunxi_pio_edge 19 Edge usb0-id-det 86: 0 0 sunxi-nmi 0 Level axp20x_irq_chip 120: 0 0 axp20x_irq_chip 33 Edge axp20x-pek-dbr 121: 0 0 axp20x_irq_chip 34 Edge axp20x-pek-dbf IPI0: 0 0 CPU wakeup interrupts IPI1: 0 0 Timer broadcast interrupts IPI2: 1959 7864 Rescheduling interrupts IPI3: 0 0 Function call interrupts IPI4: 5 5 Single function call interrupts IPI5: 0 0 CPU stop interrupts IPI6: 0 0 IRQ work interrupts IPI7: 0 0 completion interrupts Err: 0 ### ifconfig: eth0 Link encap:Ethernet HWaddr 02:04:07:c1:5e:08 inet addr:192.168.10.7 Bcast:192.168.10.255 Mask:255.255.255.0 inet6 addr: fe80::4:7ff:fec1:5e08/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:25 errors:0 dropped:0 overruns:0 frame:0 TX packets:18 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2184 (2.1 KiB) TX bytes:2012 (1.9 KiB) Interrupt:49 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1 RX bytes:0 (0.0 TX bytes:0 (0.0 ### df: Filesystem Size Used Avail Use% Mounted on /dev/root 7.4G 1.1G 6.0G 15% / devtmpfs 997M 0 997M 0% /dev tmpfs 1005M 0 1005M 0% /dev/shm tmpfs 1005M 9.5M 996M 1% /run tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 1005M 0 1005M 0% /sys/fs/cgroup tmpfs 1005M 28K 1005M 1% /tmp ### mmc0:59b4 info: cid: 1b534d3030303030106cc553f300fa8d csd: 400e00325b590000775d7f800a4000a3 scr: 0235800300000000 date: 10/2015 name: 00000 type: SD preferred_erase_size: 4194304 fwrev: 0x0 hwrev: 0x1 oemid: 0x534d manfid: 0x00001b serial: 0x6cc553f3 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=00000 MODALIAS=mmc:block erase_size: 512 I will post results for a couple more cards later this week 1
Igor Posted April 20, 2016 Posted April 20, 2016 Another interesting device - Opi+ internal eMMC with 3.4.111-sun8i KB reclen write rewrite read reread read write 102400 4 2905 2939 10041 10077 6646 2508 102400 16 13683 14321 27919 27794 20558 13883 102400 512 33513 34057 41190 41458 40939 31822 102400 1024 33748 34100 43155 43369 42638 33539 102400 16384 35693 36086 46106 46458 46170 36327 102400 4 2916 2938 10044 10064 6665 2507 102400 16 13691 14445 28092 27806 20594 13868 102400 512 33323 33560 41054 40773 40572 32233 102400 1024 34774 34449 42817 42775 42359 33125 102400 16384 36028 36516 46010 45785 45749 36585
tkaiser Posted April 20, 2016 Author Posted April 20, 2016 Another interesting device - Opi+ internal eMMC with 3.4.111-sun8i Indeed. Sequential speeds not that impressive but random I/O especially with 16K record size pretty fast
tkaiser Posted April 20, 2016 Author Posted April 20, 2016 Another eMMC result: random random KB reclen write rewrite read reread read write 102400 4 3836 3989 13389 13370 10816 3727 102400 16 14491 14452 28656 27941 25246 13844 102400 512 30696 30482 50109 50102 49613 30575 102400 1024 30844 30666 51191 51202 50959 30466 102400 16384 32673 33962 55222 55213 55158 33856 This is the 8GB eMMC of the soon available RK3288 (Cortex-A17) based MiQi Development Board (made by Benn Huang, one of Cubietech's founders). Both single threaded CPU and GbE network performance are impressive but prices irritating low (especially for the smaller variant with 1GB RAM and 8GB eMMC)
rufik Posted April 22, 2016 Posted April 22, 2016 One more brand new Samsung EVO 16GB (MB-MP16DA/EU) result on OPI 2 + Armbian 5.05 random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 102400 4 2388 2172 6462 6658 6543 1195 102400 16 5634 6580 14451 14747 14232 3749 102400 512 11254 10524 21463 21467 21317 8986 102400 1024 11650 11604 22049 22044 21947 9091 102400 16384 11874 11383 22860 22877 22848 10566 random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 102400 4 2236 2346 6664 6483 6547 1220 102400 16 5664 6571 14427 14712 14413 3677 102400 512 11227 10935 21470 21463 21318 9073 102400 1024 11596 11621 22055 22068 21961 8974 102400 16384 11893 11916 22886 22885 22830 10923 Card info: mmc0:59b4 info: cid: 1b534d303030303010f06d55a000f887 csd: 400e00325b590000775d7f800a4000a3 scr: 0235800300000000 date: 08/2015 name: 00000 type: SD preferred_erase_size: 4194304 fwrev: 0x0 hwrev: 0x1 oemid: 0x534d manfid: 0x00001b serial: 0xf06d55a0 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=00000 MODALIAS=mmc:block erase_size: 512
Eng-Shien Wu Posted April 24, 2016 Posted April 24, 2016 Orange Pi Plus2 (3.4.110-sun8i) Internal 16GB eMMC (ext4 default) random random kB reclen write rewrite read reread read write 102400 4 8492 10095 8338 8664 8445 10208 102400 16 23447 25116 26746 26757 26200 24697 102400 512 43090 43578 63193 63137 62919 43216 102400 1024 43879 44221 68323 68414 68306 43544 102400 16384 47075 47792 77034 77155 77226 47549 102400 4 9438 10336 8274 8624 8602 10222 102400 16 23473 25063 26765 26775 26248 24851 102400 512 43084 43813 63765 63687 63607 43213 102400 1024 43892 44595 68199 68395 68288 43945 102400 16384 47481 47817 77016 77196 77068 47634 Samsung EVO+ 32GB random random kB reclen write rewrite read reread read write 102400 4 1915 3314 7246 7373 7036 3392 102400 16 8721 9930 14333 14211 14337 11827 102400 512 20023 20107 21360 21338 21336 19805 102400 1024 20209 20244 21991 21994 21978 20300 102400 16384 20882 20838 22791 22796 22842 20952 102400 4 3231 3324 7378 7364 7391 3402 102400 16 11296 11957 14358 14351 14376 11858 102400 512 14713 16865 21356 21337 21337 19770 102400 1024 16534 18337 21970 21970 21974 19856 102400 16384 17611 18955 22816 22801 22793 19766 The 16GB eMMC on the OPI Plus2 appears to be a step up from the 8GB eMMC on the OPI Plus and the 32GB EVO+.
rufik Posted April 26, 2016 Posted April 26, 2016 1 year old Sandisk 32GB SD Card (model SE32G, so it's Extreme Plus AFAIK) used in DSLR camera. Test on OPI 2 + Armbian 5.05, 2nd and 3rd pass: random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 102400 4 3168 3093 8178 8355 7134 2833 102400 16 6661 7139 15621 15832 15794 7021 102400 512 17313 18136 21632 21643 21655 20083 102400 1024 20643 20714 22152 22176 22160 20491 102400 16384 21284 21342 22944 22944 22942 21334 random random bkwd record stride kB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 102400 4 3169 3158 8242 8322 7017 2842 102400 16 6664 7133 15748 16077 16029 7055 102400 512 15479 20580 21659 21652 21658 20145 102400 1024 20600 20669 22155 22163 22163 20521 102400 16384 21165 21300 22933 22934 22931 21267 Card info: mmc0:aaaa info: cid: 035344534533324780242e28a200e27b csd: 400e00325b590000edc87f800a4040c3 scr: 0235800300000000 date: 02/2014 name: SE32G type: SD preferred_erase_size: 4194304 fwrev: 0x0 hwrev: 0x8 oemid: 0x5344 manfid: 0x000003 serial: 0x242e28a2 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SE32G MODALIAS=mmc:block erase_size: 512
tkaiser Posted April 26, 2016 Author Posted April 26, 2016 Since Igor added support for ODROID C1+ to Armbian I tested the C1+ with the well known Samsung Pro (64 GB): random random kB reclen write rewrite read reread read write 102400 4 3109 2919 7462 7449 7432 2384 102400 16 6320 6613 11577 11582 11530 6077 102400 512 14734 14784 16159 16161 16162 14825 102400 1024 14834 14857 16272 16284 16275 14870 102400 16384 15286 15282 16542 16539 16544 15309 tk@odroidc1:~$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor performance tk@odroidc1:~$ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq 1536000 Results do not differ with 1.7GHz instead and funnily the Samsung Pro card was slow as hell when I started the tests (the above is the 6th test run -- especially 4K writes were below 1000 in the beginning so it seems the card's controller always needs some time when the card is used again). It seems on ODROID C1+ sequential transfer speeds are limited to 16.5 MB/s so choosing eMMC with this board is an even better idea compared with other boards that show higher sequential speeds. Also Hardkernel's eMMC modules are known to be blazing fast especially when it's about random I/O.
lampra Posted May 2, 2016 Posted May 2, 2016 Here is a used Transcend 8GB class 10 card HW info from armbianmonitor uploaded to http://sprunge.us/hDGd Photo random random kB reclen write rewrite read reread read write 102400 4 1506 1540 7531 7517 7081 511 102400 16 3870 6134 14746 14733 14493 2098 102400 512 5469 8974 20892 20890 20836 3263 102400 1024 6799 9709 20886 21001 20989 3740 102400 16384 7141 9234 21170 21189 21184 7222 ### mmc0:b368 info: cid: 744a45555344202010cb607a5200dc0f csd: 400e00325b5900003bad7f800a4000c5 scr: 0235800000000000 date: 12/2013 name: USD type: SD preferred_erase_size: 4194304 fwrev: 0x0 hwrev: 0x1 oemid: 0x4a45 manfid: 0x000074 serial: 0xcb607a52 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=USD MODALIAS=mmc:block erase_size: 512
Recommended Posts