SBC News

Karl here and I will keep this short for you. First I will share my experience installing an upgrade module for the Lasermaster 2 Pro, the Ortur LU2-10A. The LM2Pro came with a 5.5w laser module and this upgrade brings the power up to approximately 10w optical power. Spoiler, I am not happy with the kit. The Ortur LU2-10A kit comes with a very simple adapter board that appears to do two tasks. 1 is to adapt wiring, and 2, inject additional power for the higher power laser module. It looks like the board will adapt to a lot of different connection types. I followed the instructions and the first time I plugged everything in the laser came on full power for about a second. …

Elephants Robotics myBuddy 280, aka myBuddy 280 Pi, is a dual-arm collaborative robot for education with a 7-inch display powered by Raspberry Pi 4 SBC, and also features three ESP32-based M5Stack core modules that help with the internal communication between the motors and the Raspberry Pi board. It builds upon the earlier myCobot 280 Pi robot with a single arm, with the same 280mm working range, but the new robot offers two arms, and a total of 13 degrees of freedom (DoF). The robot is also equipped with two 2MP HD cameras for computer vision, a standard 3.3V expansion I/O interface, a LEGO expansion interface, and can be fitted with a variety of adapters such as sucti…

We’ve seen plenty of ESP32 LoRa boards with the traditional 433 MHz, 868 MHz, or 915MHz frequencies, but I think LilyGO LoRa V1.8 (aka T3 V1.8) is the first ESP32 board that integrates a Semtech SX1280 transceiver for the 2.4GHz LoRa standard used for global coverage, notably maritime applications, and ranging. The ESP32 & SX1280 board also offers 26 pins for expansion, a microSD card for data storage, a 2-pin connector for batteries, a 0.96-inch OLED for information display, and comes with a 3D antenna and u.FL connector for WiFi and Bluetooth, and an SMA antenna for LoRa connectivity. LilyGO LoRa/T3 V1.8 specifications: SoC – Espressif ESP32 dual-core Xtensa LX6 pro…

Description Add upstream megous patches & adapt to v5.19.8 Checklist: [ ] Test build sunxi [ ] Test build sunxi64 View the full article

Beelink SEi12 mini PC is powered by an Intel Core i5-1235W Alder Lake U-Series 10-core hybrid processor with a 15W processor base power (PBP), making it one of the first 12th generation Alder Lake-U mini PCs. The computer ships with 16GB or 32GB dual-channel RAM, a 500GB PCIe 4.0 M.2 NVMe SSD, and provides two HDMI 2.0 ports, Gigabit Ethernet, WiFi 6 & Bluetooth 5.2 connectivity, as well as five USB ports for expansion. Beelink SEi12 i5-1235U specifications: SoC – Intel Core i5-1235U 10-core/12-thread hybrid Alder Lake U-Series processor with 2x Performance cores @ 1.3/4.4GHz, 8x Efficient cores @ 0.9/3.3GHz, 12 MB Intel Smart Cache, 80EU Iris Xe Graphics @ 800 MHz; B…

Description Slim down the dmc driver for rk322x for 5.15 and 6.1 kernels: the patch was carrying also the rk3328 driver, but was unnecessary. Also fixes various code misunderstandings that may cause crashes at startup and now uses managed driver resources with devm_* calls in place of doing everything manually. How Has This Been Tested? [x] deb kernel packages compile without errors Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x…

ASUS Tinker Board S R2.0 is a revision of the original Tinker Board S board launched in 2018 with a 16GB eMMC flash. The R2.0 model relies on Rockchip RK3288-CG W quad-core Cortex-A17 processor and gets an upgrade to Bluetooth 4.2 from Bluetooth 4.0. The rest of the specifications remain the same with 2GB DDR3, HDMI 2.0 and MIPI DSI video interface, a MIPI CSI camera interface, a 3.5mm audio jack, Gigabit Ethernet, a WiFi 4 and Bluetooth 4.x module, four USB 2.0 host ports, and a 40-pin color-coded Raspberry Pi compatible header. Tinker Board S R2.0 specifications: SoC – Rockchip RK3288-CG.W quad-core ARM Cortex A17 processor up to 1.8 GHz with Mali-T764 GPU @ up to 600 M…

RFC: introduce armbian-base-files artifact, which downloads & repacks base-files from upstream distro This was raised by Igor during upgrade testing. base-files upgrade coming from upstream distro causes many problems during upgrade, including losing the Armbian identity in /etc/os-release and /etc/issue. bsp-cli: now depends on base-files (>= ${REVISION}), this way upgrading the bsp-cli causes our base-files to be installed - bsp-cli no longer does gymnastics with /etc/os-release et al, all done in armbian-base-files now general/apt-utils.sh: introduce apt_find_upstream_package_version_and_download_url() base-files: add release to version, in order to comply…

Description As per tittle. How Has This Been Tested? [x] Build test Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings View the full article

Description Update ddr and bl31 blobs for opi5 and nanopi r6s Jira reference number [AR-9999] How Has This Been Tested? [x] Built and booted R6S fine [x] Orange Pi 5 was already working fine with https://github.com/armbian/build/commit/084fba8524937298a05fea55076ced540924cd22 Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

khadas-vim4/khadas-vim1s: very early wip; meson-s4t7/legacy 5.4 Amlogic kernel initrd: fix undeclared variable update_initramfs_cmd u-boot-menu: allow skipping U_BOOT_FDT even with BOOT_FDT_FILE set, by specifying EXTLINUX_SPECIFIC_FDT=no khadas-vim4/khadas-vim1s: very early wip; meson-s4t7/legacy 5.4 Amlogic kernel only "boot from SD" supported right now building uboot with xPack riscv-none-embed-gcc external toolchain setup in hooks kvim4: very high kernel logging + systemd debug logging to console kvim4/kvim1s: add uEnv.txt and ROOT_FS_LABEL="ROOTFS" and Khadas-esque extlinux meson-s4t7: unify khadas-vim1s and khadas-vim4 u-boot building kernel .config: s4t7: origin…

Description As per title + attach sources to commit ID How Has This Been Tested? [ ] Build test Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description You can get the event details directly from the github action environment and also just pass the secret directly into the step. Removed excess steps/processing to simplify the action. https://docs.github.com/en/actions/learn-github-actions/contexts#github-context How Has This Been Tested? I have tested and used this in my repo here Checklist: I can add additional comments if needed but I don't believe they are. [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings View the full article

mekotronics: rk3588: u-boot: borrow patch to fix build on newer gcc mekotronics: rk3588: u-boot: rewrite u-boot patches, no changes rewritten against 609a77ef6e99c56aacd4b8d8f9c3056378f9c761 - a specific commit in radxa's next-dev mekotronics: rk3588: u-boot: borrow patch to fix build on newer gcc View the full article

Description Use same uboot for current and edge builds, so that we can remove redundant lines. Add sata spi image to current, edge uboot builds. It is a bit hacky, but it works. Also add selection for SPI images like https://github.com/armbian/build/pull/8123 GitHub issue reference: Jira reference number [AR-9999] Documentation summary for feature / change Please delete this section if entry to main documentation is not needed. If documentation entry is predicted, please provide key elements for further implementation into main documentation and set label to "Needs Documentation". You are welcome to open a PR to documentation or you can leave following information for…

Description If 1st job is not run, no other will. We need to move IF to the step. Jira reference number AR-1244 How Has This Been Tested? [x] Manual run Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

A few weeks ago, in the final days leading up to Christmas, Linus Torvalds released Linux Kernel 4.20. Collaborans were once again active during this development cycle, contributing 22 patches, 112 reviews & 55 sign-offs. Here's a look at their contributions. View the full article

We’ve already seen ESP32 WiFI & Bluetooth SoC combined with a cellular modem several times already, and a couple of days ago, I wrote about LILYGO T-A7068X ESP23 board with a 4G LTE modem. Iconic Devices team has made another cellular ESP32 product with the NORVI GSM industrial controller. The DIN-Rail mountable USB programmable controller is offered with a choice of SIMCOM SIM800L 2G-only modem or QUECTEL EC21-G modem adding 3G UMTS/HSPDA+ and 4G LTE cellular connectivity. It also offers Ethernet connectivity, digital and analog inputs, relay outputs, and a small 0.96-inch OLED information display with options varying depending on the exact model. NORVI GSM specifica…

synchronization of source code and patches View the full article

Description Cleaning deprecated options from installer. Jira reference number AR-1355 How Has This Been Tested? [x] Manual run Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description I have changed label for pull request that is more telling what it means. This action depends on label change, so we need to adjust it. How Has This Been Tested? None. Parameter name change only. Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description I have a number of other single board computers that are connected to a kubernetes cluster running Longhorn for storage. I want to be able to add my new Rock 5B to the same cluster. I quickly found that the kernel doesn't have support for ISCSI_TCP. This support was added for all other boards in https://github.com/armbian/build/pull/2300. How Has This Been Tested? I built a custom kernel with this configuation using ``` ./compile.sh RELEASE=bullseye BOARD=rock-5b BRANCH=legacy BUILD_MINIMAL=no BUILD_DESKTOP=no KERNEL_ONLY=yes KERNEL_CONFIGURE=no I then installed the image and headers packages sudo dpkg -i linux-image-legacy-rockchip-rk3588_23.02.0-trunk_a…

Description Realtek rtl8723cs driver is spread among various families (sunxi64, rockchip64, rk322x) all carrying around a driver for the same realtek chip. This PR removes the single drivers from each family and consolidate them into a single patchset that is used for all the families around for kernels >= 6.1 What has been done in this PR: main source for driver and patches are sunxi64 megous patches move into patch/misc/wireless-rtl8723cs directory integrate with minor patches from rk322x/rockchip64 families update drivers_network.sh and drivers-harness.sh to apply patches in same order as before remove references from patches.megous and series.conf in sunxi64 rem…

rootfs: partially revert f26a41ff, so all repo components (all -utils -desktop) are included in rootfs cache View the full article

Description Hello all, This PR adds support for the Texas Instruments SK-AM64B. Features, schematics, and purchase links can be found on the board page[0]. We work to ensure our silicon/boards have "Upstream First" Linux support, so this board makes use of stock upstream U-Boot and Linux, no patching needed to utilize the full set of feature. The only odd part here is our first-stage bootloader, which is built from fetched sources separately (see compile_k3_bootgen() in k3.conf). If a pre-built binary for this is preferred just let me know. Thanks! [0] https://www.ti.com/tool/SK-AM64B How Has This Been Tested? [x] Build/Boot tested Bookworm CLI/Minimal on Current(v6…

Description A lot of people has been asking on the forums for host mode not working on the otg port in 6.1+ kernel. It seems to be caused by patches.megous/usb-musb-sunxi-Avoid-enabling-host-side-code-on-SoCs-where-it-s.patch. The patch claims to solve sleep issue (rtcwake not working) on pinephone. As we don't support pinephone, I don't see any issue disabling the same. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Tested host mode works on otg port on Orange Pi Zero (H3) and NanoPi Duo2 (H3) [X] Tested rtcwake continues to work on NanoPi Duo2 (H3), Orange…

Description This PR makes two changes for the bcm2711 family: Use FS UUID for mounting the root filesystem instead of the FS label, bringing this family in line with most other boards. Write config.txt and cmdline.txt earlier, allowing it to be modified from customize-image-host.sh or customize-image.sh. These two changes are conceptually independent, but touch the same area of code, so I put them in a single PR instead of splitting them. Documentation summary for feature / change No documentation needed. How Has This Been Tested? Built for rpi4b, with customizations to cmdline.txt and config.txt in customize-image-host.sh. Tested on rpi3b+ board. I do not have a rp…

Description While the NanoPi R6C can in theory also use an Armbian image built for the NanoPi R6S like described on the Armbian website, it was not a user-friendly solution at all. Add the R6C as separate board with support for the latest mainline U-Boot. The R6S is a solid little machine with one M.2 slot for a NVMe SSD as well as two Ethernet ports (1x 1G, 1x 2.5G), two USB-A (USB2 and USB3) ports and even an integrated chip for UART debugging, so you only need to connect a USB-C cable for debugging instead of the three cables with a separate UART-USB adapter. Wiki link: https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R6C Hardware specs: SoC: Rockchip RK3588…

git: git_ensure_safe_directory(): use env vars instead of changing config git: git_ensure_safe_directory(): use env vars instead of changing config View the full article

Description Default packages change in minimal images. Checklist: [x] My code follows the style guidelines of this project View the full article

Description As asked in #7127, removed the hook in board config that changed which dts file is used on edge kernel branch and changed symlink patches to actual files. GitHub issue reference: Jira reference number [AR-9999] How Has This Been Tested? [x] build for bigtreetech cb1 and boot Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Collabora is headed to Amsterdam. Meet us at Booth A63 in Hall 14 as we showcase GStreamer Analytics combined with ML, hardware-accelerated video decoding in Dante Studio using GStreamer, remote rendering for standalone XR, and more! View the full article

Description Closing https://github.com/armbian/build/issues/3862 View the full article

Panfrost, a project that delivers an open source implementation of a driver for the newest versions of the Mali family of GPUs, now includes support for running Wayland compositors and zero-copy GPU-accelerated clients. View the full article

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number AR-1268 AR-1269 AR-1270 The fixMACaddress udev rules are generic enough to be used on all boards where random MAC addresses are a problem. However, for now, the feature is only enabled as part of the RockPi S BSP. Other BSPs could also copy the directory package/bsp/fixMACaddress to the $destination if desired. How Has This Been Tested? Generated new images, verified that WiFi address is now fixed across reboots. Verified that applying SDIO clock speed DT overlay …

Translation of Jetson Nano to use a startup with efi\grub (this model does not require an installation procedure on eMMC, so it can be immediately transferred to this startup option). A separate grub-arm extension allows not to break the current state of the grub extension.sh and will allow to smoothly switch to a two-level scheme in the future. All common data for x86 and arm are placed in the upper level (in a common file extension grub.sh ), and specific additions are distributed at the third level (files grub-x86.sh and grub-arm.sh ). View the full article

ADLINK “AI Camera Dev Kit” is a pocket-sized NVIDIA Jetson Nano devkit with an 8MP image sensor, industrial digital inputs & outputs, and designed for rapid AI vision prototyping. The kit also features a Gigabit Ethernet port, a USB-C port for power, data, and video output up to 1080p30, a microSD card with Linux (Ubuntu 18.04), and a micro USB port to flash the firmware. As we’ll see further below it also comes with drivers and software to quickly get started with AI-accelerated computer vision applications. AI Camera Dev Kit specifications: System-on-Module – NVIDIA Jetson Nano with CPU – Quad-core Arm Cortex-A57 processor GPU – NVIDIA Maxwell architecture with 128…

Fix the amlogic tvbox build's extlinux.conf to use uImage for the kernel image file instead of Image as some of the included uboot files do not support the Image format and require the uImage. Changes to be committed: modified: packages/bsp/aml-s9xx-box/boot/extlinux/extlinux.conf Description How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Local build and install on multiple amlogic tv boxes [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, partic…

CHIPSEA CST85F01 is an Arm Cortex-M4F microcontroller clocked at up to 480 MHz and designed for IoT applications with dual-band (2.4/5.0 GHz) WiFi 6 with TWT (Target Wake Time) support, Bluetooth 5.0 LE, and a range of I/Os. Following the recent availability of 2.4 GHz WiFi 6 IoT chips such as Espressif Systems ESP32-C6 and Bouffalo Lab BL616, CHIPSEA CST85F01 offers an alternative with dual-band WiFi 6 connectivity while we are waiting for the launch of the ESP32-C5 RISC-V microcontroller. CST85F01 specifications: CPU core – Arm Cortex-M4F CPU with MPU and FPU @ up to 480 MHz Memory – 992 KB SRAM, SDR/DDR PSRAM interfaces Storage – 752 KB ROM, 8 Mbit to 128 Mbit flash Wi…

The Raspberry Pi Debug Probe is a USB serial adapter based on the Raspberry Pi RP2040 microcontroller and designed to debug the Raspberry Pi Pico, third-party RP2040 boards, and pretty much any Arm board through SWD and/or UART interfaces. The main advantage over a typical USB-to-serial adapter is the presence of a Serial Wire Debug (SWD) bridge used for bare metal code development and debugging through tools such as OpenOCD. The Raspberry Pi Debug Probe specifications: MCU – Raspberry Pi RP2040 dual-core Cortex-M0+ microcontroller @ 133 MHz with 264KB SRAM Storage – 2MB SPI flash (W25Q16JVUXIQ) Debug interfaces 3.3V Serial Wire Debug (SWD) 3-pin JST connector conforming …

Radxa ROCK 3C, also called ROCK 3 Model C, is a Rockchip RK3566 Arm SBC with up to 8GB RAM and WiFi 5. It mostly follows the Raspberry Pi 3 Model B form factor, but also adds an M.2 PCIe socket for NVMe SSDs. The single board computer also comes with a MicroSD card slot and eMMC flash module socket to boot the OS, a 4Kp60 capable HDMI 2.0 port, a MIPI DSI connector, a MIPI CSI camera connector, a 3.5mm jack with microphone, four USB ports, Gigabit Ethernet, and a 40-pin color-coded GPIO header. ROCK 3C specifications: SoC – Rockchip RK3566 quad-core Cortex-A55 processor @ 1.6 GHz with Arm Mali-G52 GPU, 0.8 TOPS NPU (AI accelerator) System Memory – 1GB, 2GB, 4GB, or 8GB LP…

Description As per the discovery made by @brentr , the current kernel for rockchip64 become hugely bigger than usual (13M vs. 18M, gzipped). After some checks, it turns out that what happened before with the appearance of useless and unwanted cruft (PATA, ACPI, SCSI :roll_eyes: , whatever... see linked PR) happened again. This PR restores the a sane kernel config for current 6.6 and edge 6.7, rebasing over kernel 6.1. I double checked against latest sane 6.6 I could find, which is 6.6-rc4 and differences are minor. I attach a "patch" file with the differences from sane 6.6-rc4 and 6.6.13 in this PR (use less -R to see with colors) in case someone wants to check it out…

Description There is a 6.6 kernel available from hardkernel: https://forum.odroid.com/viewforum.php?f=226. Start migrating from 6.1to it. How Has This Been Tested? Reboot of my Odroid HC1 Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description The family consists of 4 boards, but hasn't seen any activity in years, is unmaintained, stuck on EOL Linux 4.14 and the bootloader does not build. Thus remove the kernel, the family and the boards which have been unmaintained for some years unfortunately. See https://github.com/armbian/build/issues/6821#issuecomment-2200664955 If you have any objections for this removal or would like to maintain these boards, please tell :) If at some point in the future someone wants to bring back one of those boards, they can find this PR/commit through a GitHub search. But there wasn't too much information removed, to support new kernels >=6.6, work would likely have …

Description Continuing from https://github.com/armbian/build/pull/6229 RK repo is dead, moving to pure mainline bump EDGE to 6.10.y disable broken patches update kernel config AR-2015 How Has This Been Tested? [x] Boot device with kernel 6.10.3 [x] Boot device with kernel 6.6.44 Checklist: [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Moved patch from uboot 35xx to uboot 3588 In order to patch. At before, the patch has not been patched. How Has This Been Tested? [x] ./compile.sh build ARTIFACT_IGNORE_CACHE=yes BOARD=firefly-itx-3588j BRANCH=vendor BUILD_DESKTOP=yes BUILD_MINIMAL=no DESKTOP_ENVIRONMENT=gnome DESKTOP_ENVIRONMENT_CONFIG_NAME=config_base KERNEL_CONFIGURE=no RELEASE=bookworm [x] observed successful patch to uboot w/o error [x] u-boot said Starting Kernel ... Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] My changes generate no new …

PanVK has reached another milestone and will be officially supporting Vulkan 1.4 on V10! We're up-to-date with the latest version and are well caught up for this release. View the full article

Collabora is proud to share that we've partnered with Flipper Devices to work together on building an open Linux platform for hardware hackers. The long-awaited Flipper One will be built on the Rockchip RK3576! View the full article

Description Enable Security Scorecards - Security health metrics for Open Source projects Jira reference number AR-1229 How Has This Been Tested? Tested on user repository. Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

As one year ends and another begins, Collabora is proud to be once again an Includer sponsor for the latest round (#17) of Outreachy internships, which began earlier this month! More specifically, Collabora is sponsoring the Linux kernel projects for the December 2018 – March 2019 semester. View the full article

The NVIDIA Jetpack 5.0.2 production release is out with Ubuntu 20.04, the Jetson Linux 35.1 BSP 1 with Linux Kernel 5.10, an UEFI-based bootloader, support for Jetson AGX Orin module and developer kit, as new as updated packages such as CUDA 11.4, TensorRT 8.4.1, cuDNN 8.4.1. NVIDIA Jetson modules and developer kits are nice little pieces of hardware for AI workloads, but the associated NVIDIA Jetpack SDK was based on the older Ubuntu 18.04 which was not suitable for some projects. But the good news is that Ubuntu 20.04 was being worked on and initially available through the Jetpack 5.0.0/5.0.1 developer previews, and NVIDIA Jetpack 5.0.2 SDK is the first production relea…

Description As per subject: esp8089 is a low-end 802.11n wifi chip that has been found on several tv boxes. Add proper driver to mainline kernels (both current 5.15 and edge 5.19) to properly support it. Also does minor tweaks to overlays/config scripts to bring per-board hardware configuration into board/led-conf overlays. How Has This Been Tested? [x] Compiled deb packages for current kernel and tested on live installation [x] Compiled deb packages for edge kernel and tested on live installation Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-u…

Description Removing deprecated build configuration from the system. We don't need to have nor build this crap anymore. There are two other potential to be removed without too much thinking Removed: odroidxu 4.14.y meson64 legacy 4.9.y meson64 current was replaced with 5.19.y Also useful: meson legacy 5.10 @hzyitc mvebu legacy 4.19.y @Heisath mvebu64 4.14 @ManoftheSea What do you think? Jira reference number AR-1372 How Has This Been Tested? Its just cleaning out, build test was conducted on meson64 switch from CURRENT to 5.19.y View the full article

Fix the builddeb script so linux-image upgrades work correctly on fat /boot partitions. Currently the postinst file that is created has the following contents: ... ln -sf vmlinuz-6.0.10-meson64 /boot/Image 2> /dev/null || mv /boot/vmlinuz-6.0.10-meson64 /boot/Image touch /boot/.next mkimage -A arm64 -O linux -T kernel -C none -a 0x1080000 -e 0x1080000 -n "Linux" -d /boot/vmlinuz-6.0.10-meson64 /boot/uImage > /dev/null 2>&1 exit 0 ... In the first line on a fat filesystem the mv command leaves the system without a file named 'vmlinuz...'. The following mkimage command is looking for the vmlinuz... file that is no longer there and fails. This fix changes t…

Variscite VAR-SOM-MX93 is a 200-pin SO-DIMM system-on-module based on NXP i.MX 93 dual-core Cortex-A55/M33 AI processor with up to 2 GB LPDDR4 RAM, 64GB eMMC flash, and onboard WiFi & Bluetooth module and audio driver. The Variscite module follows the announcement of two other NXP i.MX 93 system-on-modules, namely the Forlinx FET-MX9352-C with board-to-board connectors and the iWave Systems iW-RainboW-G50M LGA module compliant with OSM Size L form factor to be soldered directly on the carrier board. VAR-SOM-MX93 specifications: SoC – NXP i.MX 93 with up to 2x Cortex-A55 cores @ 1.7GHz, 1x Cortex-M33 real-time co-processor @ 250 MHz, 0.5 TOPS NPU, 2D PxP graphics engin…

The “Auspicious Machine” may look like a Blackberry phone, but it’s actually a handheld Linux PC with a built-in QWERTY keyboard and a 3.5-inch display that can be powered by a range of system-on-modules (SoM). The computer, whose name can also be translated as the “Auspicious Phone”, can be used as a Linux terminal with GPIO control, and for gaming with Linux distributions such as Batotera or RetroBat with the D-Pad and ABXY buttons found on the device. Auspicious Machine specifications: Supported SoMs Bigtreetech CB1 with Allwinner H616 quad-core Cortex-A53 processor and 1GB DDR4 Raspberry Pi CM4 with Broadcom BCM2711 quad-core Cortex-A73 processor, up to 8GB LPDDR4, …

export-logs: add GHA output for logs_url (when SHARE_LOG=yes) View the full article

initrd: cache: add /etc/modprobe.d to cache key (eg for MODULES_BLACKLIST) initrd: cache: add /etc/modprobe.d to cache key (eg for MODULES_BLACKLIST) View the full article

Description See title. This fixes kernel compilation for 6.8.2 How Has This Been Tested? [x] Apply wireless patches to rockchip64-edge (which is 6.8) Checklist: [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

This skips all git checkout, patching, configuring and cleaning when USE_EXISTING_KERNEL_TREE=yes is passed. This can be useful when doing kernel development by making changes directly to the kernel sourcetree in cache/sources, while still allowing to use the compile.sh to use the same compilation commands, deb package building, ccache, etc. It is also useful when bisecting a kernel issue. Can be used something like this: USE_EXISTING_KERNEL_TREE=yes ./compile.sh default kernel To produce a kernel deb in a few minutes ready to be installed on a device. This is mostly a proof of concept to explore the usecase. In particular: I am not happy with the USE_EXISTING_KERN…

With VirGL, Venus, and vDRM, virglrenderer offers three different approaches to obtain access to accelerated GFX in a virtual machine. Here are the latest updates around each of these approaches. View the full article

Description The dts for vendor kernel has been merged . Add vendor branch support for Cool Pi Genbook And use mainline u-boot for vendor branch。 How Has This Been Tested? Compiled with command： ./compile.sh build BOARD=coolpi-genbook BRANCH=vendor BUILD_DESKTOP=yes BUILD_MINIMAL=no DESKTOP_APPGROUPS_SELECTED='browsers chat desktop_tools editors email internet multimedia office programming remote_desktop' DESKTOP_ENVIRONMENT=gnome DESKTOP_ENVIRONMENT_CONFIG_NAME=config_base DOWNLOAD_MIRROR=bfsu EXPERT=yes EXTRAWIFI=no KERNEL_CONFIGURE=no RELEASE=noble flash the img to sdcard， insert the sdcard to a usb disk， insert usb disk to genbook，the Armbian system can boot from usb…

Wireless Tag WT99P461-S1 is an ESP32-P4X and ESP32-C61 board based on the same WT01P461-S1 module as found on the ESP32P4C61-TINY board introduced last June. The main differences are that the WT99P461-S1 is a full-featured development board, adding features such as Fast Ethernet, RS-485, CAN bus, an on-board microphone, and a speaker connector. It still comes with a microSD card slot, MIPI DSI/CSI connectors, and other features, making it suitable for industrial HMIs, gateways, and control applications. WT99P461-S1 specifications: Wireless Module – Wireless-Tag WT01P461-S1 (25 x 25mm) Microcontroller – ESP32-P4X (ESP32-P4 v3.2) MCU Dual-core RISC-V microcontroller @ 360/4…

Released a few months ago, the Google Pixel 3 is the first Android phone running with the mainline graphics stack. A feat that was deemed impossible 10 years ago is now a reality thanks to a lot of hard work from the entire community. View the full article

The new "Hello World" module should help people understand the minimum requirements. Note that these requirements will still change over time, given that the architecture is still in alpha stage. That said, having an overview module should help attracting developers more quickly than a lengthy documentation. On the docker side, the dependencies have been slightly improved, but that's actually a part of the architecture I'll have to revise, since one "DEPS" file is not enough for all the various ubuntu and debian versions. I still wonder if I'm going to mimic the 'config/...' folder architecture used for the installer, or if I'll try to shorten it with things like DEPS…

Jira reference number AR-1287 View the full article

Description As per subject, IPX code has been commented out in the rtl8723cs to avoid inclusion of ipx.h header file which has been removed in recent kernels How Has This Been Tested? [x] Compilation of current 5.15 kernel works Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Small tweak How Has This Been Tested? [X] Build, burn and run Checklist: [ ] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Minor fixes. Jira reference number [AR-9999] How Has This Been Tested? [x] Boot and reboot test Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Collabora's contributions include ongoing upstreaming of the RockChip RK3588 and MediaTek Helio X10 (MT6795) SoCs, numerous bug fixes and improvements for Cedrus and Hantro IPs, and memory shrinker support for the VirtIO-GPU driver. View the full article

Description If experimental support was added, lets generate nightly images. View the full article

Google has just released the first developer preview of Android 14 with productivity improvements for developers, as well as enhancements to performance, privacy, security, and user customization. Android 14 aims to work better across devices and form factors with improved support for tablets and foldables and adds window size classes, sliding pane layout, Activity embedding, and box with constraints, etc… To help developers, the company also published “Get started with large screens” documentation and released a Cross-device SDK preview. The new version of the mobile operating systems also further streamlines background work to optimize system health and battery life and…

Description All boards are without maintainers so not a problem if features are disabled. Jira reference number [AR-9999] How Has This Been Tested? [x] Kernel build Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

The Armbian project is nearing its 10-year anniversary, and we’re excited to announce that our upcoming release Armbian 23.05, codename “Suni”, will be the biggest one yet! It’s a significant milestone as it marks the first release based on our completely refactored build framework! The new framework has been in development for around 3 years, during which we combined our decades long experience with Linux and embedded systems with the latest technologies that have emerged in recent years. We’ve taken all that knowledge and expertise to create something truly exceptional for our users and Linux community at large. Continue reading to learn more about the project and …

How Has This Been Tested? [*] Turn this option off: sata hard drives are not recognized [*] Enable this option: Correctly identify sata drives Everything else is exactly the same Checklist: [*] I have performed a self-review of my own code [*] My changes generate no new warnings View the full article

armbian-resize-filesystem wants to align partitions on 16 MB boundaries, however due to an off-by-one error it would make the last sector of the partition start at a 16 MB boundary instead of ending at a 16 MB boundary. View the full article

Description This commit adds Khadas MCU support to edge kernel. It can be used for fan control and some device configurations. Fan state can be set from /sys/class/thermal/cooling_device3. Jira reference number AR-2085 How Has This Been Tested? [x] Tested fan control. Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

RFC: DO NOT MERGE: patching: rewrite: try to stabilize patch index stanzas as well as From lines RFC: DO NOT MERGE: patching: rewrite: try to stabilize patch index stanzas as well as From lines git format-patch --zero-commit doesn't affect index xxx...yyy lines, only From: so use the classy "use a regex with a callback" solution as git format-patch doesn't offer one this will make all patches change when rewritten, but hopefully for the last time ! not sure what other impacts this might have though - git am might not work any more? we need to preserve index 000000000000..xxx as zeros, which indicate new file creation, thus: new file creations are rewritten as index…

Join us at Augmented World Expo for a first-hand look at our recent XR work including ElectricMaple remote rendering, and xrdesktop showcasing a fully open-source 3-window desktop configuration with gaze-driven window selection. View the full article

Description Pull request #3838 add spi boot support for rock-3a. It can build successfully on my local machine, but build will fail in github workflow environment: https://github.com/amazingfate/armbian-rock3a-images/runs/6648716251?check_suite_focus=true#step:3. After this fix build is ok now: https://github.com/amazingfate/armbian-rock3a-images/runs/6649318129?check_suite_focus=true How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Build sucessfully in github workflowwnvironment. Checklist: [x] My code follows the style guidelines of this project [x] I have…

Description Jira reference number AR-1245 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Build and boot Cinnamon Sid image for Odroid N2 [x] Build and boot Budgie Sid image for Odroid N2 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View t…

This week, Collaborans will be taking part, and speaking, in this year's ESE Kongress, Germany's largest congress for professional embedded software engineering. View the full article

Bumps actions/checkout from 2 to 3. Release notes Sourced from actions/checkout's releases. v3.0.0 Updated to the node16 runtime by default This requires a minimum Actions Runner version of v2.285.0 to run, which is by default available in GHES 3.4 or later. v2.4.2 What's Changed Add set-safe-directory input to allow customers to take control. (#770) by @​TingluoHuang in actions/checkout#776 Prepare changelog for v2.4.2. by @​TingluoHuang in actions/checkout#778 Full Changelog: https://github.com/actions/checkout/compare/v2...v2.4.2 v2.4.1 Fixed an issue where checkout failed to run in container jobs due to the new git setting safe.directory v2.4.0 Convert …

While the Rockchip RK3588 processor is advertised as reaching 2.4 GHz, not all RK3588 chips may achieve this frequency. The keyword is PVTM (Process-Voltage-Temperature Monitor), and we’ll try to explain why it does, and why some of the RK3588 processors may only be clocked at about 2.3 GHz, while others will run fine at 2.4 GHz. This all started with Rock 5B SBC debug party, where we noticed our boards did not reach the same frequency. Willy Tarreau noted the “pvtm” value was different between our boards: Willy’s board: (Cortex-A76 cluster 1 @ 2,304 MHz, cluster 2 @ 2,352 MHz) [crayon-62d3b98029e47968049721/] CNXSoft board (Cortex-A76 cluster 1 @ 2,304 MHz, cluster 2 @ 2…

Description Closing https://github.com/armbian/build/issues/3531 Jira reference number AR-1276 View the full article

Description Quick copy from Focal. Doesn't work properly yet ... Jira reference number AR-1364 How Has This Been Tested? [ ] Made x86 and arm64 image Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Collabora's contributions include mainlining the HEVC uAPI, adding VIRTIO documentation, upstreaming MediaTek smartphones, and adding support for two new Chromebooks and for the Mali-G57 GPU in the Panfrost kernel driver. View the full article

Forlinx FET3588-C is a relatively compact Rockchip RK3588 system-on-module measuring 68x50mm and exposing many of the processor’s I/Os through four 100-pin high-density connectors. The module ships with up to 8GB LPDDR4x and 64GB eMMC flash, and the company also provides the OK3588-C development board for evaluation with HDMI output and input, two MIPI DSI interfaces, five camera connectors, dual Gigabit Ethernet, M.2 sockets for WiFi and 4G/5G cellular connectivity, and more. Forlinx FET3588-C RK3588 system-on-module Specifications: SoC – Rockchip RK3588 octa-core processor with 4x Arm Cortex-A76 cores @ up to 2.4 GHz, 4x Arm Cortex-A55 cores, Arm Mali-G610 MP4 GPU with …

Pimoroni Badger 2040 W wireless programmable e-Paper badge comes with a 2.9-inch black & white E-Ink display and a Raspberry Pi Pico W board for WiFi (and Bluetooth) connectivity. It is an update to the Pimoroni Badger 2040 with the exact same display, but instead of using a Raspberry Pi RP2040 microcontroller, Pimoroni fitted a Raspberry Pi Pico W on the back of the board, probably to avoid going through FCC and CE certifications. Badger 2040 W specifications: MCU board – Raspberry Pi Pico W board with: Raspberry Pi RP2040 dual-core Arm Cortex M0+ running at up to 133Mhz with 264kB of SRAM Storage – 2MB QSPI flash Wireless – 802.11b/g/n WiFi 4 and Bluetooth Classic+…

by passing the WT_SESSION environment variable to the docker container View the full article

Description Jira reference number AR-1443 How Has This Been Tested? [x] Build and boot test image https://paste.armbian.com/cozadamazi Checklist: [x] My code follows the style guidelines of this project [x] My changes generate no new warnings View the full article

mekotronics: post_family_config() hook is too late to change DDR_BLOB and BL31_BLOB, move to board-scope variables mekotronics: post_family_config() hook is too late to change DDR_BLOB and BL31_BLOB, move to board-scope variables thanks @efectn for spotting this; I had tested the blobs in other ways, before deciding to refactor their change into a hook, which never worked. View the full article

Description I'm rewriting patches with command PREFER_DOCKER=no ./compile.sh rewrite-kernel-patches BOARD=rock-5b BRANCH=edge on armbian jammy, but I get all commit index length changed from 12 to 13. Maybe that's because envirmonts are different between docker and bare metal. So add --abbrev=12 to always get commit index length 12. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] PREFER_DOCKER=no ./compile.sh rewrite-kernel-patches BOARD=rock-5b BRANCH=edge Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-revie…

Description Fix regression caused by my previous PR #6248 that broke compilation for clearfog uboot. This PR refactors the patching logic to a separate function thereby making it easy to use outside uboot.sh. During the process I also noticed that uboot_prepatch_version variable being initialized as part of that logic was not really being used anywhere. Hence removed the same. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Test build for meson-s4t7 [X] Test build for clearfog Checklist: [ ] My code follows the style guidelines of this project [ ] I have p…

Description Converted to markdown and bash simulating nasting array.Proof of consept Jira reference number [AR-9999] Documentation summary for feature / change Please delete this section if entry to main documentation is not needed. If documentation entry is predicted, please provide key elements for further implementation into main documentation and set label to "Needs Documentation". You are welcome to open a PR to documentation or you can leave following information for technical writer: [x] A simple converter complexly [x] Will Turn your Json to a Bash simulated array and provide a table of features. [x] ./build/doc/doc.sh How Has This Been Tested? [x] (https:/…

Description As per the title. Allows using emmc for boot partition and nvme or usb for root partition when installing via armbian-install. How Has This Been Tested? [X] Created and booted image on VIM1S with emmc+USB combo Checklist: Please delete options that are not relevant. [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [X] My changes generate no new warnings [X] Any dependent changes have been merged and published in downstream modules View the full article

Description Improve fan curve from rockchip default via device-tree overlay Better operating temperatures No discernible noise during standard workloads Low always-on rotation (make sure it's not too low to buzz) Credits: incognito Source: Radxa Forum How Has This Been Tested? [x] Built and enabled on Radxa Rock 5B ${BRANCH}="current" Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] My changes generate no new warnings View the full article

We’ve recently written about ESP32-C3-0.42LCD board with ESP32-C3 wireless microcontroller, a 0.42-inch display, and a Qwicc connector for expansion. But it turns out the developer, 01Space, has also launched an almost identical board, RP2040-0.42LCD, with Raspberry Pi RP2040 MCU replacing the ESP32-C3 WiFi and Bluetooth MCU. RP2040-0.42LCD board specifications: SoC – Raspberry Pi RP2040 dual-core Cortex-M0+ microcontroller at up to 125 MHz, with 264KB SRAM Storage – 2 MB SPI flash Display – 0.42-inch LCD USB – 1x USB Type-C port for power and programming Expansion Qwiic I2C connector 7-pin and 8-pin headers with up to 11x GPIOs, 2x SPI, 2x I2C, 4x ADC, 1x UART, 5V, 3.3V,…

This should help with keeping the GitHub actions updated on new releases. This will also help with keeping it secure. Dependabot helps in keeping the supply chain secure https://docs.github.com/en/code-security/dependabot GitHub actions up to date https://docs.github.com/en/code-security/dependabot/working-with-dependabot/keeping-your-actions-up-to-date-with-dependabot https://github.com/ossf/scorecard/blob/main/docs/checks.md#dependency-update-tool Signed-off-by: naveen 172697+naveensrinivasan@users.noreply.github.com View the full article

Description Maintenance. Jira reference number [AR-9999] How Has This Been Tested? [ ] Tested build at MR View the full article