RaptorSDS
-
Posts
270 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by RaptorSDS
-
-
On 22.5.2017 at 4:43 PM, balbes150 said:
Added dtb m8s
also thank you for add led but i use the dtb for my running rom but still no led trigger at sys/class/leds , did i need a modul or something more ?
-
24 minutes ago, balbes150 said:
What does "change module" ? You copy the system other files ?
no
lsmod show 8723bs is the modul for my wlan
i change ( nano /etc/modules) from dhd to 8723bs and change (nano /etc/modprobe.d/blacklist.conf) insert blacklist dhd
than my wifi work
-
46 minutes ago, balbes150 said:
I can't check for WiFi in s812. You should try to use other dtb and see how to work with them.
i have use m8s.dtb , n200_2gb.dtb and the one from the my backup .all with same result .
my steps
i have flash sdcard
change modules to 8723bs and blacklist in modprobe.d dhd
change interfaces set lan to static and wlan to hotlpug and dhcp
than iwlist for wlan ( find my one )
check ntp is running
iwconfig setup my ssid and key
iwconfig ( check of wlan connection) and than dhclient (but dont do anything , have to ctrl+c )
test with wpa_supplicant but same result .
do you have a changelog of the new image 3.10.99
-
On 22.5.2017 at 4:43 PM, balbes150 said:
Updated image Mate and server kernel 3.10 (20170522). Added dtb m8s.
i test today but i have problems to optain a ip addr from dhclient ,
i connect to my wlan ( iwconfig told me all fine) than i start dhclient and nothing ( i start and restart ntp deamon but this time no effect) .
-
Led dts for the 3.10.99 ,that would be nice thanks
-
3 hours ago, balbes150 said:
Update test image kernel 4.11 and deb packages from it (yandex and Mega). This way I have a start on Tronsmart MXIII Plus with SD card (when using the dtb file miii-plus). Is only works through the console UART. Network is not working.
i test your kernel , m8s.dtb , work i can log in
start time about 2-3min
but 2 error
first at usb only my printer show not the canon scanner at the other usb port ,
second at shutdown the blue led still on dont switch to red
-
i add this lines to my dts file
pwmleds {
compatible = "pwm-leds";power {
label = "m8s:blue:power";
pwms = <pwm_ef 1 7812500 0>;
max-brightness = <255>;
active-low;
linux,default-trigger = "default-on";
};};
pwm_ef {
status = "okay";
pinctrl-0 = <pwm_e_pins>, <pwm_f_ao_pins>;
pinctrl-names = "default";
clocks = <clkc CLKID_FCLK_DIV3>, <clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0", "clkin1";};
but i got still sytax error in the DTC
please can you add the led funktion to the meason8s2 n200.dtb for me ?
-
But is the m8s+ a S9xx chip ? Or still a S8xx ( maybe 805 but than he has the wrong image S802 /812 )
-
i found leds at /sys/class and backlight but there are no parameters or triggers i am still on 3.xx kernel , but i am new to linux
-
like i wrote befor
my box
Akimso M8s S812 ( label as m812+) 2GB RAM 8GB ROM RTL8723BS WIFI/Bluetooth HDMI SPdif AV(4pin) IR-Remote
i know its a clone ( only 19€ at amazon)
-
Also i notice that your m8s dtb had only 12kb the old n200dtb 22kb
-
can you please descripte how to controll LED ?
-
i take a new SD Card
i got follow error
random stop at PWM Blue LED
some SD Card read error or maybe image problem
GPIO 32 error
log file att.
"your MEGA.co Link is password protectt"
-
yandex have only 43kb/s , i download file during night , i will test tomorrow evening
-
ok another reflash of sd card and dhcp client work , this time NTP start befor dhclient and run fine , now wlan internet work.!!!!
-
Quote
In the file /etc/modules describes what to load at startup.
thank you , after a long day and complet new flash of sdcard i got bcm unload and realtek load ( problem was a misspelling blacklist.conf) , now i stuck at next problem dhcp (dhclient) dont work.
dhcp run 5 min than stop without any ip .
-
Quote
1. Try using the image Ubuntu.
2. Disable the download of WiFi module in Debian and try with dtb n200.
thank you ubuntu works
how i can disable download ? , i could set up eth0 and ssh , i have a wlan0 adapter but it dont find any signal ( maybe its possible to integrate the RTL8723BS driver from the S9xx (mini M8s) rom to the S812 rom )
-
i make some UART log files for my rom problems
https://drive.google.com/drive/folders/0B_XvIiyAvIIlcHEwY19PZjIwVDA?usp=sharing
-
hello
thanks for your work
my box
Akimso M8s S812+ 2GB RAM 8GB ROM RTL8723BS WIFI
my problem
the multiboot script run fine
i boot from USB and SD card fine
i have UART USB adapter
i have android 4.4 root
i have try many dtb and S8x jessy xfc and server rom and s9x jessy server rom all boot
all boot the rom but than i got stuck
with some dtb i got till hdmitx cec: wait for cec not ready
or
i got till GPIO 32 error irq in used and than a loop of starting and closing the CPU1 and 2 and the GPIO 32 and the IRQ
please help
i am windows user and only the beginning of linux
Armbian for Amlogic S805 and S802/S812
in Amlogic CPU Boxes
Posted
i done this with new image but no luck
its maybe like this problem https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/267891
i have also "ifup wlan0" like 20 time dhcp discovery 255.255.255.255 and than close
you mean find gpio pins ?