Search the Community
Showing results for tags 'helios64'.
-
Hello, i have trouble with my Helios64 (possibly bricked), so I am interested to by a new one. And if i can fix mine, the second one could allow me to participate to armbian support for it. Anyone have one for sale ? Preferably in Europe. Thank you.
-
I found my Helis64 unresponsive after about a week or so. Even heartbeat LED is not blinking (permanently on). I see this repeating on the serial console [495778.879711] rcu: rcu_preempt kthread timer wakeup didn't happen for 5324533 jiffies! g9706925 f0x2 RCU_GP_WAIT_FQS(5) ->state=0x200 [495778.880747] rcu: Possible timer handling issue on cpu=3 timer-softirq=2513452 [495778.881383] rcu: rcu_preempt kthread starved for 5324534 jiffies! g9706925 f0x2 RCU_GP_WAIT_FQS(5) ->state=0x200 ->cpu=3 [495778.882336] rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. [495778.883137] rcu: RCU grace-period kthread stack dump: [495778.883584] task:rcu_preempt state:R stack:0 pid:16 tgid:16 ppid:2 flags:0x00000008 [495778.884404] Call trace: [495778.884627] __switch_to+0xe0/0x124 [495778.884946] __schedule+0x308/0xa8c [495778.885263] schedule+0x34/0xf8 [495778.885549] schedule_timeout+0x98/0x1bc [495778.885902] rcu_gp_fqs_loop+0x150/0x670 [495778.886256] rcu_gp_kthread+0x234/0x274 [495778.886603] kthread+0x114/0x118 [495778.886896] ret_from_fork+0x10/0x20 [495778.887219] rcu: Stack dump where RCU GP kthread last ran: [495778.887705] Sending NMI from CPU 4 to CPUs 3: Aside from usual NFS server (unused at the time) and syncthing, it was running duplicity backup at the time. I cannot rule out that it ran out of memory. Though it did run full backup successfully a couple of days ago. helios64-rcu-stall.txt
-
Hello Everyone, Unfortunately my helios64 is not glowing any power LED. As soon as I connect the power supply it only shows a blinking orange LED light, that is basically for the battery status. My power supply is perfectly fine and even I have tried using with the ATX power supply same result. Does anyone face this issue and please help me to get my board working again. Thanks!
-
A stable Armbian Bookworm configuration for your Helios64 is provided here (solved). ************************************************************************* Recently a new Armbian 23.08.1 Bookworm image with linux-6.1.50 was made available for Helios64 on its download page (see here) - which is as such great 😀. Everything starts up nicely, but unlike the previous Bookworm 23.05 image, the current one has an issue with accessing USB devices. In the boot process the following error occurs: # cat /var/log/syslog | grep error 2023-09-07T12:31:05.671598+02:00 helios64 kernel: [ 2.537009] dwc3 fe900000.usb: error -ETIMEDOUT: failed to initialize core 2023-09-07T12:31:05.671602+02:00 helios64 kernel: [ 2.537107] dwc3: probe of fe900000.usb failed with error -110 No USB device could be accessed. As this seems to be related to the realtek driver r8152, I compiled and installed the current version of that driver (see below) and after that the USB devices were accessible. # compile and install the current realtek driver git clone https://github.com/wget/realtek-r8152-linux.git cd realtek-r8152-linux... make sudo make install
-
Hey, Quick question, can I use HDDs that have the pin-3 SATA "power disable" feature with the Kobol NAS, or should I steer completely clear of them?
-
Hello everyone, I would like to sell my Helios64. The NAS is in excellent condition, and has been used with care. It is ready to be configured according to your needs. I did not make the fix to take advantage of 2.5Gb/s connectivity (2.5G Ethernet Issue at 1Gbps Link Speed). I bought it for $285.00 + $28.00 shipping + $45.00 customs clearance + $15.00 for a 2.5" adapter (KOB-H64-ADP-01) (SSD support for the system). Total = $373.00 (~€340) I can provide purchase invoices for these amounts. You can make me your offer proposals. Here are some photos : Best regards, Flolm
-
Hello everyone, I'm experiencing frequent network disconnections on my system running Armbian 24.5.3, both with Bookworm and Noble bases, which are both using Kernel 6.6.39. This issue becomes particularly frustrating when syncing files with Unison, as the interruptions disrupt the process frequently. To provide some background, I didn't encounter these network issues when I was using the last Focal version, which was running on Kernel 5.x. The current versions of Samba I'm using are 4.17.12-Debian on Bookworm and 4.19.5-Ubuntu on Noble. Unison is at version 2.52.1 on Bookworm and 2.53.3 on Noble. Both systems also have the latest updates for MDADM and OpenSSH from the standard package repositories. In the logs (journalctl -xe), I've noticed the following messages repeatedly: kernel: r8152 2-1.4:1.0 enx646266d00567: Tx timeout kernel: r8152 2-1.4:1.0 enx646266d00567: Tx status -2 These errors are accompanied by the following, occurring approximately 15 seconds earlier: kernel: xhci-hcd xhci-hcd.0.auto: WARN Event TRB for slot 3 ep 3 with no TDs queued? kernel: xhci-hcd xhci-hcd.0.auto: WARN Event TRB for slot 3 ep 3 with no TDs queued? kernel: xhci-hcd xhci-hcd.0.auto: WARN Event TRB for slot 3 ep 3 with no TDs queued? kernel: xhci-hcd xhci-hcd.0.auto: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1 kernel: xhci-hcd xhci-hcd.0.auto: Looking for event-dma 000000000908e050 trb-start 000000000908e020 trb-end 000000000908e020 seg-start 000000000908e000 seg-end 000000000908eff0 kernel: xhci-hcd xhci-hcd.0.auto: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1 kernel: xhci-hcd xhci-hcd.0.auto: Looking for event-dma 000000000908e060 trb-start 000000000908e020 trb-end 000000000908e020 seg-start 000000000908e000 seg-end 000000000908eff0 kernel: xhci-hcd xhci-hcd.0.auto: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1 kernel: xhci-hcd xhci-hcd.0.auto: Looking for event-dma 000000000908e070 trb-start 000000000908e020 trb-end 000000000908e020 seg-start 000000000908e000 seg-end 000000000908eff0 kernel: xhci-hcd xhci-hcd.0.auto: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1 kernel: xhci-hcd xhci-hcd.0.auto: Looking for event-dma 000000000908e080 trb-start 000000000908e020 trb-end 000000000908e020 seg-start 000000000908e000 seg-end 000000000908eff0 kernel: xhci-hcd xhci-hcd.0.auto: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1 kernel: xhci-hcd xhci-hcd.0.auto: Looking for event-dma 000000000908e090 trb-start 000000000908e020 trb-end 000000000908e020 seg-start 000000000908e000 seg-end 000000000908eff0 kernel: xhci-hcd xhci-hcd.0.auto: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1 kernel: xhci-hcd xhci-hcd.0.auto: Looking for event-dma 000000000908e0a0 trb-start 000000000908e020 trb-end 000000000908e020 seg-start 000000000908e000 seg-end 000000000908eff0 kernel: xhci-hcd xhci-hcd.0.auto: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1 kernel: xhci-hcd xhci-hcd.0.auto: Looking for event-dma 000000000908e0b0 trb-start 000000000908e020 trb-end 000000000908e020 seg-start 000000000908e000 seg-end 000000000908eff0 kernel: xhci-hcd xhci-hcd.0.auto: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1 kernel: xhci-hcd xhci-hcd.0.auto: Looking for event-dma 000000000908e0c0 trb-start 000000000908e020 trb-end 000000000908e020 seg-start 000000000908e000 seg-end 000000000908eff0 kernel: xhci-hcd xhci-hcd.0.auto: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1 kernel: xhci-hcd xhci-hcd.0.auto: Looking for event-dma 000000000908e110 trb-start 000000000908e020 trb-end 000000000908e020 seg-start 000000000908e000 seg-end 000000000908eff0 kernel: xhci-hcd xhci-hcd.0.auto: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 3 comp_code 1 kernel: xhci-hcd xhci-hcd.0.auto: Looking for event-dma 000000000908e120 trb-start 000000000908e020 trb-end 000000000908e020 seg-start 000000000908e000 seg-end 000000000908eff0 I've come across advice suggesting the installation of the correct driver, but that hasn't been very helpful so far. Has anyone else faced similar issues with network stability, particularly under heavy load (e.g., large file transfers)? If so, what steps did you take to resolve it? I would greatly appreciate any insights or recommendations on how to diagnose or fix this problem. Thank you in advance for your assistance! Best regards, mtlmarko189 edit: Please forgive if I should have overlooked the same topic, but unfortunately I have not found what I was looking for on the topic regarding Helios64.
-
Hello, After facing multiple instabilities during previous week, I decided to completely reinstall my helios64 to a fresh image (bookworm) from the download section. But before doing that, I need some help/have some questions: Currently, I’m using emmc to host the system, how can I completely backup and restore the system on an sd-card (you know, just in case...) Does the current image (https://dl.armbian.com/helios64/Bookworm_current_minimal) already contains usb drivers from:and this dtb file: Does the process to install the new image on emmc is the same as the one documented on Kobol site? At the moment, I’m a little bit lost on how to proceed… Thanks a lot for your help.
-
With the recent update of the kernel "edge" package (6.8.11-edge-rockchip64) when the system boots. interfaces get different names (they used to be "end0" and "eth1" before, and now they are "eth0" and "eth1"), but more importantly, they both show different MAC address (the old address returns when previous kernel is booted). It took some time to figure why it did not appear on its prescribed address... Anyone notice this, or has a clue why? Armbian 24.5.5 noble Linux kobol 6.8.11-edge-rockchip64 #1 SMP PREEMPT Sat May 25 14:28:41 UTC 2024 aarch64 aarch64 aarch64 GNU/Linux
-
Howdy. I m running a Helios64 on Armbian 21.02.1 Buster with Linux 5.10.63-rockchip64. I realise this is somewhat old, but it works for me. I have been using MergerFS to present a big "vritual" storage area on my server: jon@OXYGEN:~$ more /etc/fstab UUID=a79a14c0-3cf4-4fb9-a6c6-838571351371 / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro 0 1 tmpfs /tmp tmpfs defaults,nosuid 0 0 # "Disk 2" = /dev/sda3 = 8d360e1c-1908-4d8d-8289-2b1c83604950 UUID=8d360e1c-1908-4d8d-8289-2b1c83604950 /srv/mnt/disk2 btrfs defaults,noatime,nodiratime,nofail,subvol=@data 0 2 # "Disk 3" = /dev/sdb2 = eceee45f-5be5-48ba-a928-8f61686923b0 UUID=eceee45f-5be5-48ba-a928-8f61686923b0 /srv/mnt/disk3 btrfs defaults,noatime,nodiratime,nofail,subvol=@data 0 2 # "Disk 4" = /dev/sdc3 = 8ba04a0d-92eb-44e5-a4f0-99ebe2431b22 UUID=8ba04a0d-92eb-44e5-a4f0-99ebe2431b22 /srv/mnt/disk4 btrfs defaults,noatime,nodiratime,nofail,subvol=@data 0 2 # "Disk 5" = /dev/sdd3 = c3f0e61b-67af-4b35-acb8-e6698f8c9f64 UUID=c3f0e61b-67af-4b35-acb8-e6698f8c9f64 /srv/mnt/disk5 btrfs defaults,noatime,nodiratime,nofail,subvol=@data 0 2 # MergerFS - aggregate the mounted disks together /srv/mnt/disk2:/srv/mnt/disk3:/srv/mnt/disk4:/srv/mnt/disk5 /srv/mnt/virtual fuse.mergerfs defaults,allow_other,use_ino,fsname=/srv/mnt/virtual 0 0 I have recently begun exporting this virtual disk via nfs. Nice! It relly is easy to set up, and it does "just work": jon@OXYGEN:~$ more /etc/exports /srv/mnt/virtual/oxygen/media 192.168.2.0/24(rw,sync,insecure,no_root_squash,no_subtree_check,nohide,fsid=0) But, when my server is rebooted, the nfs-server.service fails to start: _ _ _ _ __ _ _ | | | | ___| (_) ___ ___ / /_ | || | | |_| |/ _ \ | |/ _ \/ __| '_ \| || |_ | _ | __/ | | (_) \__ \ (_) |__ _| |_| |_|\___|_|_|\___/|___/\___/ |_| Welcome to Armbian 21.02.1 Buster with Linux 5.10.63-rockchip64 No end-user support: work in progress System load: 3% Up time: 9 min Memory usage: 17% of 3.77G IP: 172.19.0.1 172.22.0.1 172.21.0.1 192.168.2.105 CPU temp: 43°C Usage of /: 41% of 15G [ General system configuration (beta): armbian-config ] Last login: Thu May 23 16:18:16 2024 from 1975:1976:1977:e00:dead:beef:0000:1111 jon@OXYGEN:~$ sudo service nfs-kernel-server status [sudo] password for jon: ● nfs-server.service - NFS server and services Loaded: loaded (/lib/systemd/system/nfs-server.service; enabled; vendor preset: enabled) Active: failed (Result: exit-code) since Sat 2024-05-25 15:36:31 NZST; 10min ago Process: 1210 ExecStartPre=/usr/sbin/exportfs -r (code=exited, status=1/FAILURE) Process: 1218 ExecStopPost=/usr/sbin/exportfs -au (code=exited, status=0/SUCCESS) Process: 1219 ExecStopPost=/usr/sbin/exportfs -f (code=exited, status=0/SUCCESS) May 25 15:36:31 OXYGEN systemd[1]: Starting NFS server and services... May 25 15:36:31 OXYGEN exportfs[1210]: exportfs: Failed to stat /srv/mnt/virtual/oxygen/media: No such file or directory May 25 15:36:31 OXYGEN systemd[1]: nfs-server.service: Control process exited, code=exited, status=1/FAILURE May 25 15:36:31 OXYGEN systemd[1]: nfs-server.service: Failed with result 'exit-code'. May 25 15:36:31 OXYGEN systemd[1]: Stopped NFS server and services. Running "$ sudo service nfs-kernel-server start" manually, however, gets it going: jon@OXYGEN:~$ sudo service nfs-kernel-server start jon@OXYGEN:~$ sudo service nfs-kernel-server status ● nfs-server.service - NFS server and services Loaded: loaded (/lib/systemd/system/nfs-server.service; enabled; vendor preset: enabled) Active: active (exited) since Sat 2024-05-25 16:03:04 NZST; 1s ago Process: 7428 ExecStartPre=/usr/sbin/exportfs -r (code=exited, status=0/SUCCESS) Process: 7429 ExecStart=/usr/sbin/rpc.nfsd $RPCNFSDARGS (code=exited, status=0/SUCCESS) Main PID: 7429 (code=exited, status=0/SUCCESS) May 25 16:03:03 OXYGEN systemd[1]: Starting NFS server and services... May 25 16:03:04 OXYGEN systemd[1]: Started NFS server and services. So, to me, it seems that the MergerFS-provided "virtual" filesystem at /srv/mnt/virtual is not ready at the time that the NFS service is starting up. Does anyone know: 1. whether I can modify the definition of the NFS Service, within systemd, so that it starts up later in the boot process? Am I able to define a dependency on some other filesystem service that has yet to be started? 2. whether I can define something else that gets kicked off late in the boot process, which simply attempts to restart the NFS Server service, in the hope that by this late stage in the boot process the MergerFS location is "ready"? Many thanks, Jon
-
Hi, Today i upgrade to 24.5.3 when apt full-upgrade proposed me to upgrade and return of crash 😞 Tuned rk3399-kobol-helios64.dtb L2 hs400 file seen to be update... i copy paste file used with 6.6.32... I replace rk3399-kobol-helios64.dtb.org (with 24.5.3) with my rk3399-kobol-helios64.dtb post in this forum sha256sum: e90ebceb4b2f213818f320dfc61c90e556e0470702afa4117b0302bffc3d2cce rk3399-kobol-helios64.dtb sha256sum: 0eb03b645ab8125a4460d4509df32050188a8bdf2b5065f4321748b4eb6f6b4d rk3399-kobol-helios64.dtb.org It's seem to be not crash now... Keep in touch. UPDATE: i confirm, after update to 24.5.3, copy rk3399-kobol-helios64.dtb with L2 and hs400 in place of rk3399-kobol-helios64.dtb original is mandatory UPDATE 2: Same if you build with framwork last 24.8 version, you need to remplace: sha256sum: 0eb03b645ab8125a4460d4509df32050188a8bdf2b5065f4321748b4eb6f6b4d rk3399-kobol-helios64.dtb with sha256sum: e90ebceb4b2f213818f320dfc61c90e556e0470702afa4117b0302bffc3d2cce rk3399-kobol-helios64.dtb-6.6.30-L2-hs400-opp rename to rk3399-kobol-helios64.dtb
-
Hello, I have a problem, when I enter "sudo apt install zfs-dkms" on my Helios64, I get this error message: "Module build for kernel 6.6.36-current-rockchip64 was skipped because the kernel headers for this kernel do not appear to be installed." I also made sure to install the kernel header in armbian-config and also rebooted. When I type "apt list --installed | grep linux-headers", I get this listing: WARNING: apt does not have a stable CLI interface. Use it with caution in scripts. linux-headers-current-rockchip64/bookworm,now 24.5.1 arm64 [installed] omv7 itself is installed and running. The image "Armbian_24.5.3_Helios64_bookworm_current_6.6.36_minimal.img.xz" has been installed. apt update and apt upgrade were run after installing the image The plan is to get OMV7 running with zfs on my Helios64 I hope someone can help me with this Regards Saam27
-
@prahal There are two versions of the bootloader in the repository (edge and current). I just tried the current u-boot from the repository. It works but dmesg outputs seven of the following messages: [ 9.674633] rockchip-i2s ff8a0000.i2s: Could not register PCM This note mentions that such error messages could mean that DMA and sound are missing in the linux kernel, could this be ignored ? P.S.: Those messages are not thrown if the recommended bootloader (linux-u-boot-edge-helios64_22.02.1_arm64) is flashed to emmc.
-
The mainline 5.11 patch "phy: rockchip: set pulldown for strobe line in dts" https://github.com/torvalds/linux/commit/8b5c2b45b8f0a11c9072da0f7baf9ee986d3151e (not backported to 5.10.y) seems to have broken most if not all rockchip board EMMC HS400 enhanced strobe support. This probably affects supported rockchip boards (at least rk3399 ones, but probably most). That is boards exhibit: [ 18.985162] mmc1: running CQE recovery [ 18.988056] ------------[ cut here ]------------ [ 18.988500] mmc1: cqhci: spurious TCN for tag 12 and the filesystem ends up corrupted on write attempt. Note that another bug about regulator core DEFERRED support (which might have produced the same issue hardware wise) was introduced in 5.10.43 (I had bisected it to https://github.com/torvalds/linux/commit/98e48cd9283dbac0e1445ee780889f10b3d1db6a "regulator: core: resolve supply for boot-on/always-on regulators"). But I was confident that it to be fixed in at least 6.1 by https://github.com/torvalds/linux/commit/8a866d527ac0441c0eb14a991fa11358b476b11d "regulator: core: Resolve supply name earlier to prevent double-init" (introduced in 6.1), still EMMC was still failing on me. Thanks to @RussianNeuroMancer telling me that not all rk339 boards had EMMC HS400es broken, I found that nanopc-t4 had https://github.com/torvalds/linux/commit/463be3cb357dab7d7e4d8dcc7c15c642e10c5bef arm64: dts: rockchip: add enable-strobe-pulldown to emmc phy on nanopi4 So the current way, from this nanopc-t4 commit, to fix EMMC HS400 on most rockchip is to add "rockchip,enable-strobe-pulldown;" to the "emmc_phy" node (at least this node alias for rk3399). &emmc_phy { + rockchip,enable-strobe-pulldown; status = "okay"; }; With this patch I can renable hs400es for rk3399 emmc on helios64 (it is already set for nanopc-t4 in mainline). Details in: I believe the https://github.com/torvalds/linux/commit/8b5c2b45b8f0a11c9072da0f7baf9ee986d3151e mainline commit was wrong in that it probably should have done the opposite (that is enable the pulldown) as most boards were hardwired so. As was done for rk3588 boards: "arm64: dts: rockchip: Fix eMMC Data Strobe PD on rk3588" https://github.com/torvalds/linux/commit/37f3d6108730713c411827ab4af764909f4dfc78 " JEDEC standard JESD84-B51 defines the eMMC Data Strobe line, which is currently used only in HS400 mode, as a device->host clock signal that "is used only in read operation. The Data Strobe is always High-Z (not driven by the device and pulled down by RDS) or Driven Low in write operation, except during CRC status response." RDS is a pull-down resistor specified in the 10K-100K ohm range. Thus per the standard, the Data Strobe is always pulled to ground (by the eMMC and/or RDS) during write operations. Evidently, the eMMC host controller in the RK3588 considers an active voltage on the eMMC-DS line during a write to be an error. The default (i.e. hardware reset, and Rockchip BSP) behavior for the RK3588 is to activate the eMMC-DS pin's builtin pull-down. As a result, many RK3588 board designers do not bother adding a dedicated RDS resistor, instead relying on the RK3588's internal bias. The current devicetree, however, disables this bias (`pcfg_pull_none`), breaking HS400-mode writes for boards without a dedicated RDS, but with an eMMC chip that chooses to High-Z (instead of drive-low) the eMMC-DS line. (The Turing RK1 is one such board.) Fix this by changing the bias in the (common) emmc_data_strobe case to reflect the expected hardware/BSP behavior. This is unlikely to cause regressions elsewhere: the pull-down is only relevant for High-Z eMMCs, and if this is redundant with a (dedicated) RDS resistor, the effective result is only a lower resistance to ground -- where the range of tolerance is quite high. If it does, it's better fixed in the specific devicetrees. Maybe one can confirm this is the case not only for rk5588 but for other rockchip boards? (about the default for hardware reset and rockchip BSP with regards to active that eMMC-DS pin's builtin pulldown if any, and board designers for other boards than rk5588 also not bothering to add a dedicated RDS resistor, instead relying on the rockchip internal bias, also if any on non rk5588) At least two other boards disabled hs400es in mainline probbaly due to this patch disabling the internal pulldown by default "phy: rockchip: set pulldown for strobe line in dts" https://github.com/torvalds/linux/commit/8b5c2b45b8f0a11c9072da0f7baf9ee986d3151e in 2023 in vanilla Linux: Rock 4C+ https://github.com/torvalds/linux/commit/2bd1d2dd808c60532283e9cf05110bf1bf2f9079 Rock Pi 4 https://github.com/torvalds/linux/commit/cee572756aa2cb46e959e9797ad4b730b78a050b
- 1 reply
-
- Helios 64
- ROCK Pi 4C
-
(and 2 more)
Tagged with:
-
Hi, In a bid to solve an issue with my NAS (which I now think was a dying HDD) I foolishly decided to upgrade from buster to bullseye and now most, if not all, of the services are failing to start - including network-manager, sshd and fancontrol so I only have access via the USB serial console. By setting a static IP I have been able to get it network access at least. When I try to start any of the dead services it hangs for a minute or so, then kicks me back to the login and the terminal is corrupted so I need to reboot before I'm able to do anything meaningful. (I am able to start fancontrol by just running `fancontrol` at which point the fans stop going at 100%, so I don't think there's a config issue there at least.) Please help! The upgrade was done with sudo sed -i 's#/debian-security bullseye/updates# bullseye-security#g' /etc/apt/sources.list sudo sed -i 's/buster/bullseye/g' /etc/apt/sources.list.d/*.list sudo sed -i 's/buster/bullseye/g' /etc/apt/sources.list sudo sed -i 's/buster/bullseye/g' /etc/apt/sources.list.d.save/*.list apt full-upgrade root@helios2:~# cat /etc/apt/sources.list deb http://deb.debian.org/debian bullseye main contrib non-free # deb-src http://deb.debian.org/debian bullseye main contrib non-free deb http://deb.debian.org/debian bullseye-updates main contrib non-free # deb-src http://deb.debian.org/debian bullseye-updates main contrib non-free deb http://deb.debian.org/debian bullseye-backports main contrib non-free # deb-src http://deb.debian.org/debian bullseye-backports main contrib non-free # deb http://security.debian.org/ bullseye/updates main contrib non-free deb http://security.debian.org/debian-security bullseye-security main contrib non-free # deb-src http://security.debian.org/ bullseye/updates main contrib non-free root@helios2:~# cat /etc/apt/sources.list.d/* deb http://apt.armbian.com bullseye main bullseye-utils bullseye-desktop deb [signed-by=/etc/apt/trusted.gpg.d/gluster.gpg] https://download.gluster.org/pub/gluster/glusterfs/LATEST/Debian/10/arm64/apt buster main deb [signed-by=/etc/apt/trusted.gpg.d/gluster.gpg] https://download.gluster.org/pub/gluster/glusterfs/LATEST/Debian/10/arm64/apt bullseye main deb http://ppa.launchpad.net/gluster/glusterfs-7/ubuntu oracular main # deb-src http://ppa.launchpad.net/gluster/glusterfs-7/ubuntu oracular main It looks like ix.io is down right now so I can't share `armbianmonitor -u` root@helios2:~# uname -a Linux helios2 5.15.93-rockchip64 #23.02.2 SMP PREEMPT Fri Feb 17 23:48:36 UTC 2023 aarch64 GNU/Linux root@helios2:~# systemctl status --all | grep dead -C 3 │ ├─1435 /sbin/sulogin │ ├─1436 bash │ ├─5144 systemctl status --all │ └─5145 grep dead -C 3 ├─dev-hugepages.mount └─system-getty.slice -- ● dev-disk-by\x2duuid-406e7e7d\x2d9517\x2d44af\x2dbcde\x2d4de3adbc6b80.device - /dev/disk/by-uuid/406e7e7d-9517-44af-bcde-4de3adbc6b80 Loaded: loaded Active: inactive (dead) ● dev-disk-by\x2duuid-9b0108f1\x2d5a11\x2d4f24\x2dabd0\x2daebb458ebbd7.device - ST4000DM004-2CV104 1 Follow: unit currently follows state of sys-devices-platform-f8000000.pcie-pci0000:00-0000:00:00.0-0000:01:00.0-ata2-host1-target1:0:0-1:0:0:0-block-sda-sda1.device -- ● data-glusterfs-sda1.mount - /data/glusterfs/sda1 Loaded: loaded (/etc/fstab; generated) Active: inactive (dead) Where: /data/glusterfs/sda1 What: /dev/disk/by-uuid/406e7e7d-9517-44af-bcde-4de3adbc6b80 Docs: man:fstab(5) -- ● proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System Loaded: loaded (/lib/systemd/system/proc-sys-fs-binfmt_misc.mount; static; vendor preset: enabled) Active: inactive (dead) Where: /proc/sys/fs/binfmt_misc What: binfmt_misc Docs: https://www.kernel.org/doc/html/latest/admin-guide/binfmt-misc.html -- ● bootsplash-ask-password-console.path - Dispatch Password Requests to Console Directory Watch when bootsplash is active Loaded: loaded (/lib/systemd/system/bootsplash-ask-password-console.path; enabled; vendor preset: enabled) Active: inactive (dead) Condition: start condition failed at Thu 2024-05-09 20:42:45 BST; 23min ago └─ ConditionPathExists=/sys/devices/platform/bootsplash.0/enabled was not met Unit apparmor.service could not be found. ● systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch Loaded: loaded (/lib/systemd/system/systemd-ask-password-console.path; static; vendor preset: enabled) Active: inactive (dead) Docs: man:systemd-ask-password-console.service(8) ● systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch Loaded: loaded (/lib/systemd/system/systemd-ask-password-wall.path; static; vendor preset: enabled) Active: inactive (dead) since Thu 2024-05-09 20:44:16 BST; 22min ago Docs: man:systemd-ask-password-console.service(8) Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable. -- ● apt-daily-upgrade.service - Daily apt upgrade and clean activities Loaded: loaded (/lib/systemd/system/apt-daily-upgrade.service; static; vendor preset: enabled) Active: inactive (dead) Docs: man:apt(8) ● apt-daily.service - Daily apt download activities Loaded: loaded (/lib/systemd/system/apt-daily.service; static; vendor preset: enabled) Active: inactive (dead) Docs: man:apt(8) ● armbian-firstrun-config.service - Armbian first run optional user configuration Loaded: loaded (/lib/systemd/system/armbian-firstrun-config.service; enabled; vendor preset: enabled) Active: inactive (dead) ● armbian-hardware-monitor.service - Armbian hardware monitoring Loaded: loaded (/lib/systemd/system/armbian-hardware-monitor.service; enabled; vendor preset: enabled) Unit auditd.service could not be found. Unit connman.service could not be found. Unit console-screen.service could not be found. -- ● bootsplash-ask-password-console.service - Dispatch Password Requests to Console when bootsplash is active Loaded: loaded (/lib/systemd/system/bootsplash-ask-password-console.service; static; vendor preset: enabled) Active: inactive (dead) ● bootsplash-hide-when-booted.service - Hide bootsplash after starting the system Loaded: loaded (/lib/systemd/system/bootsplash-hide-when-booted.service; enabled; vendor preset: enabled) Active: inactive (dead) Condition: start condition failed at Thu 2024-05-09 20:44:16 BST; 22min ago └─ ConditionPathExists=/sys/devices/platform/bootsplash.0/enabled was not met ● chrony.service - chrony, an NTP client/server Loaded: loaded (/lib/systemd/system/chrony.service; enabled; vendor preset: enabled) Active: inactive (dead) Docs: man:chronyd(8) man:chronyc(1) man:chrony.conf(5) -- ● cpufrequtils.service - LSB: set CPUFreq kernel parameters Loaded: loaded (/etc/init.d/cpufrequtils; generated) Active: inactive (dead) Docs: man:systemd-sysv-generator(8) ● cron.service - Regular background program processing daemon Unit display-manager.service could not be found. Loaded: loaded (/lib/systemd/system/cron.service; enabled; vendor preset: enabled) Active: inactive (dead) Docs: man:cron(8) ● dbus.service - D-Bus System Message Bus Loaded: loaded (/lib/systemd/system/dbus.service; static; vendor preset: enabled) Active: inactive (dead) Docs: man:dbus-daemon(1) ● e2scrub_all.service - Online ext4 Metadata Check for All Filesystems Loaded: loaded (/lib/systemd/system/e2scrub_all.service; static; vendor preset: enabled) Active: inactive (dead) Docs: man:e2scrub_all(8) ● e2scrub_reap.service - Remove Stale Online ext4 Metadata Check Snapshots Loaded: loaded (/lib/systemd/system/e2scrub_reap.service; enabled; vendor preset: enabled) Active: inactive (dead) Docs: man:e2scrub_all(8) ● emergency.service - Emergency Shell -- ├─1435 /sbin/sulogin ├─1436 bash ├─5144 systemctl status --all └─5145 grep dead -C 3 May 09 20:44:21 helios2 systemd[579]: emergency.service: Executable /bin/plymouth missing, skipping: No such file or directory May 09 20:48:11 helios2 sudo[1764]: root : TTY=ttyS2 ; PWD=/root ; USER=root ; COMMAND=/usr/bin/apt info armbian-bsp-cli-helios64 -- ● fake-hwclock.service Loaded: masked (Reason: Unit fake-hwclock.service is masked.) Active: inactive (dead) ● fancontrol.service - fan speed regulator Loaded: loaded (/lib/systemd/system/fancontrol.service; enabled; vendor preset: enabled) Drop-In: /etc/systemd/system/fancontrol.service.d └─pid.conf Active: inactive (dead) Docs: man:fancontrol(8) man:pwmconfig(8) ● getty-static.service - getty on tty2-tty6 if dbus and logind are not available Loaded: loaded (/lib/systemd/system/getty-static.service; static; vendor preset: enabled) Active: inactive (dead) ● getty@tty1.service - Getty on tty1 Loaded: loaded (/lib/systemd/system/getty@.service; enabled; vendor preset: enabled) Drop-In: /usr/lib/systemd/system/getty@tty1.service.d └─10-noclear.conf Active: inactive (dead) Docs: man:agetty(8) man:systemd-getty-generator(8) http://0pointer.de/blog/projects/serial-console.html ● glusterd.service - GlusterFS, a clustered file-system server Loaded: loaded (/lib/systemd/system/glusterd.service; enabled; vendor preset: enabled) Active: inactive (dead) Docs: man:glusterd(8) ● haveged.service - Entropy Daemon based on the HAVEGE algorithm Unit kbd.service could not be found. Unit lm-sensors.service could not be found. -- ● helios64-heartbeat-led.service - Enable heartbeat & network activity led on Helios64 Loaded: loaded (/etc/systemd/system/helios64-heartbeat-led.service; enabled; vendor preset: enabled) Active: inactive (dead) ● hostapd.service - LSB: Advanced IEEE 802.11 management daemon Loaded: loaded (/etc/init.d/hostapd; generated) Active: inactive (dead) Docs: man:systemd-sysv-generator(8) ● ifup@eth0.service - ifup for eth0 -- ● loadcpufreq.service - LSB: Load kernel modules needed to enable cpufreq scaling Loaded: loaded (/etc/init.d/loadcpufreq; generated) Active: inactive (dead) Docs: man:systemd-sysv-generator(8) ● logrotate.service - Rotate log files Loaded: loaded (/etc/systemd/system/logrotate.service; static; vendor preset: enabled) Active: inactive (dead) Docs: man:logrotate(8) man:logrotate.conf(5) ● man-db.service - Daily man-db regeneration Loaded: loaded (/lib/systemd/system/man-db.service; static; vendor preset: enabled) Active: inactive (dead) Docs: man:mandb(8) ● mountkernfs.service Unit ntp.service could not be found. Unit ntpsec.service could not be found. Unit openntpd.service could not be found. Unit plymouth-quit-wait.service could not be found. Unit plymouth-start.service could not be found. Loaded: masked (Reason: Unit mountkernfs.service is masked.) Active: inactive (dead) ● networkd-dispatcher.service - Dispatcher daemon for systemd-networkd Loaded: loaded (/lib/systemd/system/networkd-dispatcher.service; enabled; vendor preset: enabled) Active: inactive (dead) ● networking.service - Raise network interfaces Loaded: loaded (/lib/systemd/system/networking.service; enabled; vendor preset: enabled) -- ● NetworkManager.service - Network Manager Loaded: loaded (/lib/systemd/system/NetworkManager.service; enabled; vendor preset: enabled) Active: inactive (dead) Docs: man:NetworkManager(8) ● rc-local.service - /etc/rc.local Compatibility Loaded: loaded (/lib/systemd/system/rc-local.service; enabled-runtime; vendor preset: enabled) Drop-In: /usr/lib/systemd/system/rc-local.service.d └─debian.conf Active: inactive (dead) Docs: man:systemd-rc-local-generator(8) ● rescue.service - Rescue Shell Loaded: loaded (/lib/systemd/system/rescue.service; static; vendor preset: enabled) Active: inactive (dead) Docs: man:sulogin(8) ● resolvconf.service - Nameserver information manager -- ● rng-tools-debian.service - LSB: rng-tools (Debian variant) Loaded: loaded (/etc/init.d/rng-tools-debian; generated) Active: inactive (dead) Docs: man:systemd-sysv-generator(8) ● rpcbind.service - RPC bind portmap service -- ● rsync.service - fast remote file copy program daemon Loaded: loaded (/lib/systemd/system/rsync.service; enabled; vendor preset: enabled) Active: inactive (dead) Docs: man:rsync(1) man:rsyncd.conf(5) ● rsyslog.service - System Logging Service Loaded: loaded (/lib/systemd/system/rsyslog.service; enabled; vendor preset: enabled) Active: inactive (dead) Docs: man:rsyslogd(8) https://www.rsyslog.com/doc/ ● selinux-autorelabel-mark.service - Mark the need to relabel after reboot Loaded: loaded (/lib/systemd/system/selinux-autorelabel-mark.service; static; vendor preset: enabled) Active: inactive (dead) ● serial-getty@ttyS2.service - Serial Getty on ttyS2 Loaded: loaded (/lib/systemd/system/serial-getty@ttyS2.service; enabled; vendor preset: enabled) Drop-In: /usr/lib/systemd/system/serial-getty@.service.d └─10-term.conf Active: inactive (dead) Docs: man:agetty(8) man:systemd-getty-generator(8) http://0pointer.de/blog/projects/serial-console.html ● ssh.service - OpenBSD Secure Shell server Loaded: loaded (/lib/systemd/system/ssh.service; enabled; vendor preset: enabled) Active: inactive (dead) Docs: man:sshd(8) man:sshd_config(5) ● sysfsutils.service - LSB: Set sysfs variables from /etc/sysfs.conf Loaded: loaded (/etc/init.d/sysfsutils; generated) Active: inactive (dead) Docs: man:systemd-sysv-generator(8) ● systemd-ask-password-console.service - Dispatch Password Requests to Console Loaded: loaded (/lib/systemd/system/systemd-ask-password-console.service; static; vendor preset: enabled) Active: inactive (dead) Docs: man:systemd-ask-password-console.service(8) ● systemd-ask-password-wall.service - Forward Password Requests to Wall Loaded: loaded (/lib/systemd/system/systemd-ask-password-wall.service; static; vendor preset: enabled) Active: inactive (dead) Docs: man:systemd-ask-password-console.service(8) ● systemd-binfmt.service - Set Up Additional Binary Formats Loaded: loaded (/lib/systemd/system/systemd-binfmt.service; static; vendor preset: enabled) Active: inactive (dead) Condition: start condition failed at Thu 2024-05-09 20:42:46 BST; 23min ago ├─ ConditionDirectoryNotEmpty=|/lib/binfmt.d was not met ├─ ConditionDirectoryNotEmpty=|/usr/lib/binfmt.d was not met -- ● systemd-fsck-root.service - File System Check on Root Device Loaded: loaded (/lib/systemd/system/systemd-fsck-root.service; enabled-runtime; vendor preset: enabled) Active: inactive (dead) Condition: start condition failed at Thu 2024-05-09 20:42:46 BST; 23min ago └─ ConditionPathExists=!/run/initramfs/fsck-root was not met Docs: man:systemd-fsck-root.service(8) ● systemd-fsckd.service - File System Check Daemon to report status Loaded: loaded (/lib/systemd/system/systemd-fsckd.service; static; vendor preset: enabled) Active: inactive (dead) Docs: man:systemd-fsckd.service(8) ● systemd-hwdb-update.service - Rebuild Hardware Database Loaded: loaded (/lib/systemd/system/systemd-hwdb-update.service; static; vendor preset: enabled) Active: inactive (dead) Condition: start condition failed at Thu 2024-05-09 20:42:46 BST; 23min ago ├─ ConditionPathExists=|!/lib/udev/hwdb.bin was not met ├─ ConditionPathExists=|/etc/udev/hwdb.bin was not met -- ● systemd-initctl.service - initctl Compatibility Daemon Loaded: loaded (/lib/systemd/system/systemd-initctl.service; static; vendor preset: enabled) Active: inactive (dead) Docs: man:systemd-initctl.service(8) ● systemd-journal-flush.service - Flush Journal to Persistent Storage -- ● systemd-logind.service - Login Service Loaded: loaded (/lib/systemd/system/systemd-logind.service; static; vendor preset: enabled) Active: inactive (dead) Docs: man:systemd-logind.service(8) man:logind.conf(5) https://www.freedesktop.org/wiki/Software/systemd/logind -- ● systemd-machine-id-commit.service - Commit a transient machine-id on disk Loaded: loaded (/lib/systemd/system/systemd-machine-id-commit.service; static; vendor preset: enabled) Active: inactive (dead) Condition: start condition failed at Thu 2024-05-09 20:44:16 BST; 22min ago └─ ConditionPathIsMountPoint=/etc/machine-id was not met Docs: man:systemd-machine-id-commit.service(8) -- ● systemd-networkd.service - Network Service Loaded: loaded (/lib/systemd/system/systemd-networkd.service; disabled; vendor preset: enabled) Active: inactive (dead) Docs: man:systemd-networkd.service(8) ● systemd-random-seed.service - Load/Save Random Seed Unit systemd-update-done.service could not be found. -- Loaded: loaded (/lib/systemd/system/systemd-timesyncd.service; enabled; vendor preset: enabled) Drop-In: /usr/lib/systemd/system/systemd-timesyncd.service.d └─disable-with-time-daemon.conf Active: inactive (dead) Docs: man:systemd-timesyncd.service(8) ● systemd-tmpfiles-clean.service - Cleanup of Temporary Directories Loaded: loaded (/lib/systemd/system/systemd-tmpfiles-clean.service; static; vendor preset: enabled) Active: inactive (dead) Docs: man:tmpfiles.d(5) man:systemd-tmpfiles(8) -- ● systemd-update-utmp-runlevel.service - Update UTMP about System Runlevel Changes Loaded: loaded (/lib/systemd/system/systemd-update-utmp-runlevel.service; static; vendor preset: enabled) Active: inactive (dead) since Thu 2024-05-09 20:44:19 BST; 22min ago Docs: man:systemd-update-utmp.service(8) man:utmp(5) Process: 1357 ExecStart=/lib/systemd/systemd-update-utmp runlevel (code=exited, status=0/SUCCESS) Unit systemd-vconsole-setup.service could not be found. -- ● systemd-user-sessions.service - Permit User Sessions Loaded: loaded (/lib/systemd/system/systemd-user-sessions.service; static; vendor preset: enabled) Active: inactive (dead) Docs: man:systemd-user-sessions.service(8) ● unattended-upgrades.service - Unattended Upgrades Shutdown Loaded: loaded (/lib/systemd/system/unattended-upgrades.service; enabled; vendor preset: enabled) Active: inactive (dead) Docs: man:unattended-upgrade(8) ● wpa_supplicant.service - WPA supplicant Loaded: loaded (/lib/systemd/system/wpa_supplicant.service; enabled; vendor preset: enabled) Active: inactive (dead) ● -.slice - Root Slice Loaded: loaded -- │ ├─1435 /sbin/sulogin │ ├─1436 bash │ ├─5144 systemctl status --all │ └─5145 grep dead -C 3 ├─haveged.service │ └─1354 /usr/sbin/haveged --Foreground --verbose=1 ├─rpcbind.service -- │ ├─1435 /sbin/sulogin │ ├─1436 bash │ ├─5144 systemctl status --all │ └─5145 grep dead -C 3 ├─haveged.service │ └─1354 /usr/sbin/haveged --Foreground --verbose=1 ├─rpcbind.service -- ● dbus.socket - D-Bus System Message Bus Socket Loaded: loaded (/lib/systemd/system/dbus.socket; static; vendor preset: enabled) Active: inactive (dead) Listen: /run/dbus/system_bus_socket (Stream) ● rpcbind.socket - RPCbind Server Activation Socket -- ● syslog.socket - Syslog Socket Loaded: loaded (/lib/systemd/system/syslog.socket; static; vendor preset: disabled) Active: inactive (dead) since Thu 2024-05-09 20:44:16 BST; 22min ago Docs: man:systemd.special(7) https://www.freedesktop.org/wiki/Software/systemd/syslog Listen: /run/systemd/journal/syslog (Datagram) Unit armbian-hardware-monitor.target could not be found. Unit armbian-ramlog.target could not be found. -- ● basic.target - Basic System Loaded: loaded (/lib/systemd/system/basic.target; static; vendor preset: enabled) Active: inactive (dead) Docs: man:systemd.special(7) ● cryptsetup.target - Local Encrypted Volumes -- ● getty-pre.target - Login Prompts (Pre) Loaded: loaded (/lib/systemd/system/getty-pre.target; static; vendor preset: enabled) Active: inactive (dead) Docs: man:systemd.special(7) man:systemd-getty-generator(8) http://0pointer.de/blog/projects/serial-console.html -- ● graphical.target - Graphical Interface Loaded: loaded (/lib/systemd/system/graphical.target; static; vendor preset: enabled) Active: inactive (dead) Docs: man:systemd.special(7) ● local-fs-pre.target - Local File Systems (Pre) -- ● local-fs.target - Local File Systems Loaded: loaded (/lib/systemd/system/local-fs.target; static; vendor preset: enabled) Active: inactive (dead) Docs: man:systemd.special(7) ● multi-user.target - Multi-User System Loaded: loaded (/lib/systemd/system/multi-user.target; static; vendor preset: enabled) Active: inactive (dead) Docs: man:systemd.special(7) ● network-online.target - Network is Online -- ● nss-user-lookup.target - User and Group Name Lookups Loaded: loaded (/lib/systemd/system/nss-user-lookup.target; static; vendor preset: enabled) Active: inactive (dead) Docs: man:systemd.special(7) ● paths.target - Paths -- ● rescue.target - Rescue Mode Loaded: loaded (/lib/systemd/system/rescue.target; static; vendor preset: disabled) Active: inactive (dead) Docs: man:systemd.special(7) ● rpcbind.target - RPC Port Mapper -- ● shutdown.target - Shutdown Loaded: loaded (/lib/systemd/system/shutdown.target; static; vendor preset: enabled) Active: inactive (dead) Docs: man:systemd.special(7) Unit syslog.target could not be found. ● slices.target - Slices -- ● sysinit.target - System Initialization Loaded: loaded (/lib/systemd/system/sysinit.target; static; vendor preset: enabled) Active: inactive (dead) Docs: man:systemd.special(7) ● time-sync.target - System Time Synchronized -- ● umount.target - Unmount All Filesystems Loaded: loaded (/lib/systemd/system/umount.target; static; vendor preset: enabled) Active: inactive (dead) Docs: man:systemd.special(7) ● apt-daily-upgrade.timer - Daily apt upgrade and clean activities Loaded: loaded (/lib/systemd/system/apt-daily-upgrade.timer; enabled; vendor preset: enabled) Active: inactive (dead) Trigger: n/a ● apt-daily.timer - Daily apt download activities Loaded: loaded (/lib/systemd/system/apt-daily.timer; enabled; vendor preset: enabled) Active: inactive (dead) Trigger: n/a ● e2scrub_all.timer - Periodic ext4 Online Metadata Check for All Filesystems Loaded: loaded (/lib/systemd/system/e2scrub_all.timer; enabled; vendor preset: enabled) Active: inactive (dead) Trigger: n/a ● logrotate.timer - Daily rotation of log files Loaded: loaded (/lib/systemd/system/logrotate.timer; enabled; vendor preset: enabled) Active: inactive (dead) Trigger: n/a Docs: man:logrotate(8) man:logrotate.conf(5) ● man-db.timer - Daily man-db regeneration Loaded: loaded (/lib/systemd/system/man-db.timer; enabled; vendor preset: enabled) Active: inactive (dead) Trigger: n/a Docs: man:mandb(8) ● systemd-tmpfiles-clean.timer - Daily Cleanup of Temporary Directories Loaded: loaded (/lib/systemd/system/systemd-tmpfiles-clean.timer; static; vendor preset: enabled) Active: inactive (dead) Trigger: n/a Docs: man:tmpfiles.d(5) man:systemd-tmpfiles(8) root@helios2:~# dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.15.93-rockchip64 (root@cf2b4ed83279) (aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #23.02.2 SMP PREEMPT Fri Feb 17 23:48:36 UTC 2023 [ 0.000000] Machine model: Helios64 [ 0.000000] efi: UEFI not found. [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff] [ 0.000000] NUMA: NODE_DATA [mem 0xf77cc100-0xf77cdfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000200000-0x00000000f7ffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff] [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000] cma: Reserved 128 MiB at 0x00000000e9000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.0 [ 0.000000] percpu: Embedded 29 pages/cpu s80984 r8192 d29608 u118784 [ 0.000000] pcpu-alloc: s80984 r8192 d29608 u118784 alloc=29*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: root=UUID=d82ec6f7-ac67-4a80-a092-295ebfdbbd1d rootwait rootfstype=ext4 console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=1 ubootpart=306d94a6-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 [ 0.000000] Unknown kernel command line parameters "ubootpart=306d94a6-01 cgroup_enable=memory cgroup_memory=1", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 3807704K/4061184K available (16000K kernel code, 2692K rwdata, 6712K rodata, 4352K init, 593K bss, 122408K reserved, 131072K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000 [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff] [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @500000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x00000000004d0000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000004e0000 [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] } [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.002149] Console: colour dummy device 80x25 [ 0.002217] printk: console [tty1] enabled [ 0.002334] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.002357] pid_max: default: 32768 minimum: 301 [ 0.002492] LSM: Security Framework initializing [ 0.002532] Yama: becoming mindful. [ 0.002673] AppArmor: AppArmor initialized [ 0.002821] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.002859] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.006959] rcu: Hierarchical SRCU implementation. [ 0.008549] Platform MSI: interrupt-controller@fee20000 domain created [ 0.009124] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created [ 0.011444] EFI services will not be available. [ 0.012340] smp: Bringing up secondary CPUs ... [ 0.013479] Detected VIPT I-cache on CPU1 [ 0.013547] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000 [ 0.013571] GICv3: CPU1: using allocated LPI pending table @0x00000000004f0000 [ 0.013645] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.015135] Detected VIPT I-cache on CPU2 [ 0.015203] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000 [ 0.015226] GICv3: CPU2: using allocated LPI pending table @0x0000000000580000 [ 0.015297] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.016845] Detected VIPT I-cache on CPU3 [ 0.016912] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000 [ 0.016935] GICv3: CPU3: using allocated LPI pending table @0x0000000000590000 [ 0.017005] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.018500] CPU features: detected: Spectre-v2 [ 0.018513] CPU features: detected: Spectre-v3a [ 0.018520] CPU features: detected: Spectre-v4 [ 0.018525] CPU features: detected: Spectre-BHB [ 0.018534] CPU features: detected: ARM erratum 1742098 [ 0.018540] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.018546] Detected PIPT I-cache on CPU4 [ 0.018583] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000 [ 0.018601] GICv3: CPU4: using allocated LPI pending table @0x00000000005a0000 [ 0.018648] CPU4: Booted secondary processor 0x0000000100 [0x410fd082] [ 0.020015] Detected PIPT I-cache on CPU5 [ 0.020061] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000 [ 0.020081] GICv3: CPU5: using allocated LPI pending table @0x00000000005b0000 [ 0.020127] CPU5: Booted secondary processor 0x0000000101 [0x410fd082] [ 0.020300] smp: Brought up 1 node, 6 CPUs [ 0.020338] SMP: Total of 6 processors activated. [ 0.020348] CPU features: detected: 32-bit EL0 Support [ 0.020355] CPU features: detected: 32-bit EL1 Support [ 0.020365] CPU features: detected: CRC32 instructions [ 0.047134] CPU: All CPU(s) started at EL2 [ 0.047234] alternatives: patching kernel code [ 0.050385] devtmpfs: initialized [ 0.066010] Registered cp15_barrier emulation handler [ 0.066036] Registered setend emulation handler [ 0.066050] KASLR disabled due to lack of seed [ 0.066262] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.066340] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.069355] pinctrl core: initialized pinctrl subsystem [ 0.070018] DMI not present or invalid. [ 0.070887] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.075546] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.077236] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.080044] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.080138] audit: initializing netlink subsys (disabled) [ 0.080417] audit: type=2000 audit(0.080:1): state=initialized audit_enabled=0 res=1 [ 0.081677] thermal_sys: Registered thermal governor 'fair_share' [ 0.081686] thermal_sys: Registered thermal governor 'bang_bang' [ 0.081693] thermal_sys: Registered thermal governor 'step_wise' [ 0.081699] thermal_sys: Registered thermal governor 'user_space' [ 0.082180] cpuidle: using governor menu [ 0.082456] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.082689] ASID allocator initialised with 65536 entries [ 0.084016] Serial: AMBA PL011 UART driver [ 0.114072] platform ff770000.syscon:phy@f780: Fixing up cyclic dependency with fe330000.mmc [ 0.117339] platform ff8f0000.vop: Fixing up cyclic dependency with fec00000.dp [ 0.118666] platform ff900000.vop: Fixing up cyclic dependency with fec00000.dp [ 0.131544] rockchip-gpio ff720000.gpio0: probed /pinctrl/gpio0@ff720000 [ 0.132340] rockchip-gpio ff730000.gpio1: probed /pinctrl/gpio1@ff730000 [ 0.133048] rockchip-gpio ff780000.gpio2: probed /pinctrl/gpio2@ff780000 [ 0.133824] rockchip-gpio ff788000.gpio3: probed /pinctrl/gpio3@ff788000 [ 0.134539] rockchip-gpio ff790000.gpio4: probed /pinctrl/gpio4@ff790000 [ 0.159716] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.159732] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.159741] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.159750] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.165441] cryptd: max_cpu_qlen set to 1000 [ 0.244392] raid6: neonx8 gen() 1666 MB/s [ 0.312551] raid6: neonx8 xor() 1222 MB/s [ 0.380726] raid6: neonx4 gen() 1727 MB/s [ 0.448881] raid6: neonx4 xor() 1269 MB/s [ 0.517055] raid6: neonx2 gen() 1541 MB/s [ 0.585216] raid6: neonx2 xor() 1177 MB/s [ 0.653386] raid6: neonx1 gen() 1200 MB/s [ 0.721555] raid6: neonx1 xor() 932 MB/s [ 0.789715] raid6: int64x8 gen() 1001 MB/s [ 0.857912] raid6: int64x8 xor() 577 MB/s [ 0.926047] raid6: int64x4 gen() 1001 MB/s [ 0.994213] raid6: int64x4 xor() 591 MB/s [ 1.062378] raid6: int64x2 gen() 943 MB/s [ 1.130532] raid6: int64x2 xor() 524 MB/s [ 1.198710] raid6: int64x1 gen() 724 MB/s [ 1.266853] raid6: int64x1 xor() 391 MB/s [ 1.266861] raid6: using algorithm neonx4 gen() 1727 MB/s [ 1.266867] raid6: .... xor() 1269 MB/s, rmw enabled [ 1.266874] raid6: using neon recovery algorithm [ 1.268516] vcc12v_dcin_bkup: supplied by vcc12v_dcin [ 1.268899] vcc12v_hdd: supplied by vcc12v_dcin_bkup [ 1.269401] vcc5v0_perdev: supplied by vcc12v_dcin_bkup [ 1.269764] vcc5v0_hdd: supplied by vcc12v_dcin_bkup [ 1.270104] vcc5v0_sys: supplied by vcc12v_dcin_bkup [ 1.271505] iommu: Default domain type: Translated [ 1.271515] iommu: DMA domain TLB invalidation policy: strict mode [ 1.274682] vgaarb: loaded [ 1.275149] SCSI subsystem initialized [ 1.275658] libata version 3.00 loaded. [ 1.275919] usbcore: registered new interface driver usbfs [ 1.275965] usbcore: registered new interface driver hub [ 1.276009] usbcore: registered new device driver usb [ 1.276809] pps_core: LinuxPPS API ver. 1 registered [ 1.276817] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.276845] PTP clock support registered [ 1.277168] EDAC MC: Ver: 3.0.0 [ 1.278511] NetLabel: Initializing [ 1.278519] NetLabel: domain hash size = 128 [ 1.278526] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.278599] NetLabel: unlabeled traffic allowed by default [ 1.279111] clocksource: Switched to clocksource arch_sys_counter [ 1.329969] VFS: Disk quotas dquot_6.6.0 [ 1.330055] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.330890] AppArmor: AppArmor Filesystem Enabled [ 1.341530] NET: Registered PF_INET protocol family [ 1.341876] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.344975] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 1.345230] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.345353] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 1.345891] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 1.346560] TCP: Hash tables configured (established 32768 bind 32768) [ 1.346754] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.346924] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 1.347312] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.347347] NET: Registered PF_XDP protocol family [ 1.347361] PCI: CLS 0 bytes, default 64 [ 1.347999] Trying to unpack rootfs image as initramfs... [ 1.348651] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 1.349157] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 1.349963] kvm [1]: IPA Size Limit: 40 bits [ 1.351307] kvm [1]: vgic-v2@fff20000 [ 1.351343] kvm [1]: GIC system register CPU interface enabled [ 1.351639] kvm [1]: vgic interrupt IRQ18 [ 1.351971] kvm [1]: Hyp mode initialized successfully [ 1.364047] Initialise system trusted keyrings [ 1.364119] Key type blacklist registered [ 1.364436] workingset: timestamp_bits=44 max_order=20 bucket_order=0 [ 1.371163] zbud: loaded [ 1.372948] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.373856] fuse: init (API version 7.34) [ 1.376680] integrity: Platform Keyring initialized [ 1.441692] xor: measuring software checksum speed [ 1.445597] 8regs : 2541 MB/sec [ 1.448978] 32regs : 2933 MB/sec [ 1.453182] arm64_neon : 2353 MB/sec [ 1.453191] xor: using function: 32regs (2933 MB/sec) [ 1.453205] Key type asymmetric registered [ 1.453212] Asymmetric key parser 'x509' registered [ 1.453344] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.453571] io scheduler mq-deadline registered [ 1.453581] io scheduler kyber registered [ 1.453796] io scheduler bfq registered [ 1.480430] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.480452] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 [ 1.481898] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 1.481911] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ 1.487343] vdd_log: supplied by regulator-dummy [ 1.489024] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.492484] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 40, base_baud = 1500000) is a 16550A [ 1.493559] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 41, base_baud = 1500000) is a 16550A [ 1.493834] printk: console [ttyS2] enabled [ 1.495351] Serial: AMBA driver [ 1.497517] rockchip-vop ff8f0000.vop: Adding to iommu group 2 [ 1.498545] rockchip-vop ff900000.vop: Adding to iommu group 3 [ 1.505356] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.515416] loop: module loaded [ 1.524749] tun: Universal TUN/TAP device driver, 1.6 [ 1.525997] thunder_xcv, ver 1.0 [ 1.526042] thunder_bgx, ver 1.0 [ 1.526085] nicpf, ver 1.0 [ 1.527352] e1000e: Intel(R) PRO/1000 Network Driver [ 1.527359] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.527415] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.527422] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.527464] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 1.527470] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.527784] sky2: driver version 1.30 [ 1.528567] VFIO - User Level meta-driver version: 0.3 [ 1.540242] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.540272] ehci-pci: EHCI PCI platform driver [ 1.540319] ehci-platform: EHCI generic platform driver [ 1.540691] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.540710] ohci-pci: OHCI PCI platform driver [ 1.540750] ohci-platform: OHCI generic platform driver [ 1.541974] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.542004] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.542210] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x8000000002010010 [ 1.542286] xhci-hcd xhci-hcd.0.auto: irq 75, io mem 0xfe900000 [ 1.542507] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.542523] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.542539] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 1.542758] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.542775] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.542786] usb usb1: Product: xHCI Host Controller [ 1.542795] usb usb1: Manufacturer: Linux 5.15.93-rockchip64 xhci-hcd [ 1.542804] usb usb1: SerialNumber: xhci-hcd.0.auto [ 1.543424] hub 1-0:1.0: USB hub found [ 1.543466] hub 1-0:1.0: 1 port detected [ 1.543910] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.544070] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 1.544085] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.544096] usb usb2: Product: xHCI Host Controller [ 1.544105] usb usb2: Manufacturer: Linux 5.15.93-rockchip64 xhci-hcd [ 1.544114] usb usb2: SerialNumber: xhci-hcd.0.auto [ 1.544633] hub 2-0:1.0: USB hub found [ 1.544687] hub 2-0:1.0: 1 port detected [ 1.545171] usbcore: registered new interface driver usb-storage [ 1.548123] mousedev: PS/2 mouse device common for all mice [ 1.549661] i2c_dev: i2c /dev entries driver [ 1.556095] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! [ 1.556601] vdd_cpu_b: supplied by vcc5v0_sys [ 1.559325] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! [ 1.559818] vdd_gpu: supplied by vcc5v0_sys [ 1.568997] dw_wdt ff848000.watchdog: No valid TOPs array specified [ 1.571319] sdhci: Secure Digital Host Controller Interface driver [ 1.571330] sdhci: Copyright(c) Pierre Ossman [ 1.571358] Synopsys Designware Multimedia Card Interface Driver [ 1.572746] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.577292] ledtrig-cpu: registered to indicate activity on CPUs [ 1.578834] hid: raw HID events driver (C) Jiri Kosina [ 1.578965] usbcore: registered new interface driver usbhid [ 1.578974] usbhid: USB HID core driver [ 1.584210] drop_monitor: Initializing network drop monitor service [ 1.584982] NET: Registered PF_INET6 protocol family [ 1.803152] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 1.947662] Freeing initrd memory: 13060K [ 1.953250] usb 1-1: New USB device found, idVendor=2109, idProduct=2815, bcdDevice= 7.04 [ 1.953270] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.953282] usb 1-1: Product: USB2.0 Hub [ 1.953292] usb 1-1: Manufacturer: VIA Labs, Inc. [ 1.991056] hub 1-1:1.0: USB hub found [ 1.991312] hub 1-1:1.0: 4 ports detected [ 2.005042] Segment Routing with IPv6 [ 2.005165] In-situ OAM (IOAM) with IPv6 [ 2.005310] NET: Registered PF_PACKET protocol family [ 2.005542] 8021q: 802.1Q VLAN Support v1.8 [ 2.005630] Key type dns_resolver registered [ 2.008334] registered taskstats version 1 [ 2.008361] Loading compiled-in X.509 certificates [ 2.014287] Loaded X.509 cert 'Build time autogenerated kernel key: 1fb701576c47097ebe5805564f004ecdeffa983a' [ 2.021345] zswap: loaded using pool zstd/z3fold [ 2.022740] Key type .fscrypt registered [ 2.022754] Key type fscrypt-provisioning registered [ 2.025971] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes [ 2.053304] Key type encrypted registered [ 2.053339] AppArmor: AppArmor sha1 policy hashing enabled [ 2.085691] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.117051] pcie_power: supplied by vcc5v0_perdev [ 2.128044] vcc3v3_sys_s3: supplied by vcc5v0_sys [ 2.128666] vcc3v0_sd: supplied by vcc3v3_sys_s3 [ 2.129612] vcc5v0_usb: supplied by vcc5v0_perdev [ 2.130592] vcc5v0_typec: supplied by vcc5v0_usb [ 2.131168] usblan_power: supplied by vcc5v0_usb [ 2.135297] pca953x 2-0020: using no AI [ 2.138195] rk808 0-001b: chip id: 0x0 [ 2.143667] rk808-regulator rk808-regulator: there is no dvs0 gpio [ 2.143725] rk808-regulator rk808-regulator: there is no dvs1 gpio [ 2.143741] rk808-regulator rk808-regulator: max buck steps per change: 4 [ 2.144508] vdd_center: supplied by vcc5v0_sys [ 2.145467] vdd_cpu_l: supplied by vcc5v0_sys [ 2.145951] vcc_ddr_s3: supplied by vcc5v0_sys [ 2.146703] vcc1v8_sys_s3: supplied by vcc5v0_sys [ 2.147763] vcc1v8_dvp: supplied by vcc5v0_sys [ 2.148360] vcc3v0_touch: supplied by vcc5v0_sys [ 2.149048] vcc1v8_s3: supplied by vcc5v0_sys [ 2.150234] vcc_sdio_s0: Bringing 3300000uV into 3000000-3000000uV [ 2.150676] vcc_sdio_s0: supplied by vcc5v0_sys [ 2.152048] vcca3v0_codec: supplied by vcc5v0_sys [ 2.152588] vcc1v5_s3: supplied by vcc5v0_sys [ 2.154043] vcca1v8_codec: supplied by vcc5v0_sys [ 2.154591] vcc3v0_s3: supplied by vcc5v0_sys [ 2.155600] vcc3v3_sys_s0: failed to get the current voltage: -EPROBE_DEFER [ 2.155638] vcc3v3_sys_s0: supplied by vcc3v3_sys_s3 [ 2.156340] vcc3v3_s0: supplied by vcc3v3_sys_s3 [ 2.160655] rk808-rtc rk808-rtc: registered as rtc0 [ 2.161254] rk808-rtc rk808-rtc: setting system clock to 2024-05-09T19:41:41 UTC (1715283701) [ 2.164638] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode. [ 2.164678] dwmmc_rockchip fe320000.mmc: Using internal DMA controller. [ 2.164695] dwmmc_rockchip fe320000.mmc: Version ID is 270a [ 2.164761] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo [ 2.165413] dwmmc_rockchip fe320000.mmc: Got CD GPIO [ 2.166716] vcc1v8_sys_s0: supplied by vcc1v8_sys_s3 [ 2.167466] vcc0v9_s3: supplied by vcc3v3_sys_s3 [ 2.168097] avdd_0v9_s0: supplied by vcc1v8_sys_s3 [ 2.168709] avdd_1v8_s0: supplied by vcc3v3_sys_s3 [ 2.169896] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges: [ 2.169964] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000 [ 2.170000] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000 [ 2.170879] rockchip-pcie f8000000.pcie: no bus scan delay, default to 0 ms [ 2.178315] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 2.200296] rockchip-pcie f8000000.pcie: wait 0 ms (from device tree) before bus scan [ 2.200782] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00 [ 2.200802] pci_bus 0000:00: root bus resource [bus 00-1f] [ 2.200818] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff] [ 2.200837] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff]) [ 2.200908] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400 [ 2.201094] pci 0000:00:00.0: supports D1 [ 2.201108] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 2.209023] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 2.209468] pci 0000:01:00.0: [197b:0585] type 00 class 0x010601 [ 2.209554] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 2.209568] pci 0000:01:00.0: reg 0x10: [io size 0x0080] [ 2.209641] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid [ 2.209656] pci 0000:01:00.0: reg 0x14: [io size 0x0080] [ 2.209698] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid [ 2.209711] pci 0000:01:00.0: reg 0x18: [io size 0x0080] [ 2.209753] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid [ 2.209766] pci 0000:01:00.0: reg 0x1c: [io size 0x0080] [ 2.209835] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid [ 2.209839] usb 2-1: New USB device found, idVendor=2109, idProduct=0815, bcdDevice= 7.04 [ 2.209850] pci 0000:01:00.0: reg 0x20: [io size 0x0080] [ 2.209859] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.209871] usb 2-1: Product: USB3.0 Hub [ 2.209881] usb 2-1: Manufacturer: VIA Labs, Inc. [ 2.209894] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x00001fff] [ 2.209939] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.209987] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512) [ 2.210366] pci 0000:01:00.0: PME# supported from D3hot [ 2.210638] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link) [ 2.218200] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01 [ 2.218258] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff] [ 2.218286] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pref] [ 2.218306] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa011fff] [ 2.218334] pci 0000:01:00.0: BAR 0: no space for [io size 0x0080] [ 2.218349] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0080] [ 2.218362] pci 0000:01:00.0: BAR 1: no space for [io size 0x0080] [ 2.218376] pci 0000:01:00.0: BAR 1: failed to assign [io size 0x0080] [ 2.218390] pci 0000:01:00.0: BAR 2: no space for [io size 0x0080] [ 2.218403] pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0080] [ 2.218418] pci 0000:01:00.0: BAR 3: no space for [io size 0x0080] [ 2.218431] pci 0000:01:00.0: BAR 3: failed to assign [io size 0x0080] [ 2.218445] pci 0000:01:00.0: BAR 4: no space for [io size 0x0080] [ 2.218458] pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0080] [ 2.218476] pci 0000:00:00.0: PCI bridge to [bus 01] [ 2.218495] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff] [ 2.218829] pcieport 0000:00:00.0: enabling device (0000 -> 0002) [ 2.219338] pcieport 0000:00:00.0: PME: Signaling with IRQ 89 [ 2.219959] pcieport 0000:00:00.0: AER: enabled with IRQ 89 [ 2.220410] ahci 0000:01:00.0: version 3.0 [ 2.220453] ahci 0000:01:00.0: enabling device (0000 -> 0002) [ 2.221275] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled [ 2.221392] ahci 0000:01:00.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x1f impl SATA mode [ 2.221415] ahci 0000:01:00.0: flags: 64bit ncq sntf stag pm led clo pmp fbs pio slum part ccc apst boh [ 2.229604] scsi host0: ahci [ 2.230577] scsi host1: ahci [ 2.230929] hub 2-1:1.0: USB hub found [ 2.231059] hub 2-1:1.0: 4 ports detected [ 2.231566] scsi host2: ahci [ 2.232443] scsi host3: ahci [ 2.233267] scsi host4: ahci [ 2.233587] ata1: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010100 irq 90 [ 2.233604] ata2: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010180 irq 91 [ 2.233618] ata3: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010200 irq 92 [ 2.233631] ata4: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010280 irq 93 [ 2.233643] ata5: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010300 irq 94 [ 2.242754] mmc1: CQHCI version 5.10 [ 2.243204] WCN: marlin_init entry! [ 2.244730] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.245360] of_cfs_init [ 2.245407] of_cfs_init: OK [ 2.268943] mmc1: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA [ 2.340044] mmc1: Command Queue Engine enabled [ 2.340077] mmc1: new HS200 MMC card at address 0001 [ 2.341189] mmcblk1: mmc1:0001 AJTD4R 14.6 GiB [ 2.344236] mmcblk1: p1 [ 2.344942] mmcblk1boot0: mmc1:0001 AJTD4R 4.00 MiB [ 2.347428] mmcblk1boot1: mmc1:0001 AJTD4R 4.00 MiB [ 2.349698] mmcblk1rpmb: mmc1:0001 AJTD4R 4.00 MiB, chardev (241:0) [ 2.871217] usb 2-1.4: new SuperSpeed USB device number 3 using xhci-hcd [ 2.892193] usb 2-1.4: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00 [ 2.892210] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 2.892222] usb 2-1.4: Product: USB 10/100/1G/2.5G LAN [ 2.892232] usb 2-1.4: Manufacturer: Realtek [ 2.892240] usb 2-1.4: SerialNumber: 000000001 [ 12.231936] ata1: softreset failed (1st FIS failed) [ 22.232089] ata1: softreset failed (1st FIS failed) [ 33.759210] vcc3v0_sd: disabling [ 57.231598] ata1: softreset failed (1st FIS failed) [ 57.231616] ata1: limiting SATA link speed to 3.0 Gbps [ 62.443153] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 62.443174] ata1: link online but 1 devices misclassified, device detection might fail [ 62.919153] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 62.947839] ata2.00: ATA-10: ST4000DM004-2CV104, 0001, max UDMA/133 [ 62.956929] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 63.017151] ata2.00: configured for UDMA/133 [ 63.017799] scsi 1:0:0:0: Direct-Access ATA ST4000DM004-2CV1 0001 PQ: 0 ANSI: 5 [ 63.019201] sd 1:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 63.019223] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 63.019318] sd 1:0:0:0: [sda] Write Protect is off [ 63.019339] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 63.019507] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 63.110763] sda: sda1 [ 63.127476] sd 1:0:0:0: [sda] Attached SCSI disk [ 63.495157] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 63.497569] ata3.00: ATA-10: ST4000DM004-2CV104, 0001, max UDMA/133 [ 63.497814] ata3.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 63.500666] ata3.00: configured for UDMA/133 [ 63.501214] scsi 2:0:0:0: Direct-Access ATA ST4000DM004-2CV1 0001 PQ: 0 ANSI: 5 [ 63.502517] sd 2:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 63.502533] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 63.502585] sd 2:0:0:0: [sdb] Write Protect is off [ 63.502597] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 63.502682] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 63.588633] sdb: sdb1 [ 63.603350] sd 2:0:0:0: [sdb] Attached SCSI disk [ 63.817781] ata4: SATA link down (SStatus 0 SControl 300) [ 64.129791] ata5: SATA link down (SStatus 0 SControl 300) [ 64.132579] Freeing unused kernel memory: 4352K [ 64.132703] Run /init as init process [ 64.132711] with arguments: [ 64.132719] /init [ 64.132726] with environment: [ 64.132732] HOME=/ [ 64.132739] TERM=linux [ 64.132745] ubootpart=306d94a6-01 [ 64.132751] cgroup_enable=memory [ 64.132757] cgroup_memory=1 [ 64.786426] input: adc-keys as /devices/platform/adc-keys/input/input1 [ 65.003675] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found [ 65.003698] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found [ 65.003856] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock [ 65.004323] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input). [ 65.004340] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28). [ 65.004353] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20). [ 65.004371] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no). [ 65.004456] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed [ 65.004465] rk_gmac-dwmac fe300000.ethernet: clock input from PHY [ 65.011874] rk_gmac-dwmac fe300000.ethernet: init for RGMII [ 65.015423] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35 [ 65.015447] rk_gmac-dwmac fe300000.ethernet: DWMAC1000 [ 65.015458] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported [ 65.015467] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported [ 65.015475] rk_gmac-dwmac fe300000.ethernet: COE Type 2 [ 65.015484] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported [ 65.015492] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported [ 65.015602] rk_gmac-dwmac fe300000.ethernet: Normal descriptors [ 65.015612] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled [ 65.015619] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 65.146278] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL) [ 65.146305] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL) [ 65.350024] async_tx: api initialized (async) [ 65.668181] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 66.088777] systemd[1]: Inserted module 'autofs4' [ 66.142611] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 66.143545] systemd[1]: Detected architecture arm64. [ 66.204214] systemd[1]: Set hostname to <helios2>. [ 66.310253] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console [ 66.625803] random: systemd: uninitialized urandom read (16 bytes read) [ 66.629970] systemd[1]: /lib/systemd/system/haveged.service:19: Unknown lvalue 'ProtectHostname' in section 'Service', ignoring [ 66.630017] systemd[1]: /lib/systemd/system/haveged.service:20: Unknown lvalue 'ProtectKernelLogs' in section 'Service', ignoring [ 66.636333] random: systemd: uninitialized urandom read (16 bytes read) [ 66.637122] systemd[1]: Listening on udev Control Socket. [ 66.637656] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped. [ 66.637714] random: systemd: uninitialized urandom read (16 bytes read) [ 66.638215] systemd[1]: Listening on fsck to fsckd communication Socket. [ 66.638739] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 66.639021] systemd[1]: Reached target Swap. [ 66.753097] lm75 2-004c: supply vs not found, using dummy regulator [ 66.753894] hwmon hwmon2: temp1_input not attached to any thermal zone [ 66.753913] lm75 2-004c: hwmon2: sensor 'lm75' [ 66.759941] EXT4-fs (mmcblk1p1): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none. [ 67.683595] mc: Linux media interface: v0.10 [ 67.720321] random: systemd: uninitialized urandom read (16 bytes read) [ 67.720429] random: systemd: uninitialized urandom read (16 bytes read) [ 67.720469] random: systemd: uninitialized urandom read (16 bytes read) [ 67.732347] videodev: Linux video capture interface: v2.00 [ 67.750408] input: beeper as /devices/platform/beeper/input/input2 [ 67.804206] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 67.818956] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 67.914746] rockchip-iep ff670000.iep: Device rockchip-iep registered as /dev/video0 [ 67.928725] rockchip_vdec: module is from the staging directory, the quality is unknown, you have been warned. [ 67.935676] rockchip-rga ff680000.rga: HW Version: 0x03.02 [ 67.950103] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned. [ 67.981471] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video1 [ 67.984266] rkvdec ff660000.video-codec: Adding to iommu group 1 [ 68.010586] OF: graph: no port node found in /i2c@ff3d0000/typec-portc@22 [ 68.019663] hantro-vpu ff650000.video-codec: Adding to iommu group 0 [ 68.021040] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video3 [ 68.032817] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video4 [ 68.131515] panfrost ff9a0000.gpu: clock rate = 500000000 [ 68.194795] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops) [ 68.194969] [drm] unsupported AFBC format[3231564e] [ 68.196796] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops) [ 68.197418] rockchip-drm display-subsystem: bound fec00000.dp (ops cdn_dp_component_ops) [ 68.201673] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn [ 68.203396] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes [ 68.215852] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 1 [ 68.271185] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller [ 68.272400] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 3 [ 68.272531] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x8000000002010010 [ 68.272552] xhci-hcd xhci-hcd.3.auto: irq 74, io mem 0xfe800000 [ 68.272656] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller [ 68.272664] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 4 [ 68.272670] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed [ 68.272770] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 68.272775] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 68.272779] usb usb3: Product: xHCI Host Controller [ 68.272783] usb usb3: Manufacturer: Linux 5.15.93-rockchip64 xhci-hcd [ 68.272786] usb usb3: SerialNumber: xhci-hcd.3.auto [ 68.273197] ehci-platform fe380000.usb: EHCI Host Controller [ 68.281431] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0 [ 68.281458] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400 [ 68.281467] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 [ 68.281478] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1 [ 68.291991] hub 3-0:1.0: USB hub found [ 68.292019] hub 3-0:1.0: 1 port detected [ 68.292299] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 68.292369] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 68.292374] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 68.292379] usb usb4: Product: xHCI Host Controller [ 68.292382] usb usb4: Manufacturer: Linux 5.15.93-rockchip64 xhci-hcd [ 68.292385] usb usb4: SerialNumber: xhci-hcd.3.auto [ 68.303795] hub 4-0:1.0: USB hub found [ 68.303849] hub 4-0:1.0: 1 port detected [ 68.306660] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn [ 68.312297] [drm] Initialized panfrost 1.2.0 20180908 for ff9a0000.gpu on minor 0 [ 68.357318] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5 [ 68.357688] ehci-platform fe380000.usb: irq 34, io mem 0xfe380000 [ 68.371190] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00 [ 68.373813] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 68.373839] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 68.373846] usb usb5: Product: EHCI Host Controller [ 68.373852] usb usb5: Manufacturer: Linux 5.15.93-rockchip64 ehci_hcd [ 68.373857] usb usb5: SerialNumber: fe380000.usb [ 68.455792] hub 5-0:1.0: USB hub found [ 68.455834] hub 5-0:1.0: 1 port detected [ 68.562994] ohci-platform fe3a0000.usb: Generic Platform OHCI controller [ 68.564446] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6 [ 68.564739] ohci-platform fe3a0000.usb: irq 35, io mem 0xfe3a0000 [ 68.621598] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn [ 68.627303] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 68.627315] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 68.627320] usb usb6: Product: Generic Platform OHCI controller [ 68.627324] usb usb6: Manufacturer: Linux 5.15.93-rockchip64 ohci_hcd [ 68.627327] usb usb6: SerialNumber: fe3a0000.usb [ 68.627873] hub 6-0:1.0: USB hub found [ 68.627900] hub 6-0:1.0: 1 port detected [ 68.680671] EXT4-fs (sdb1): recovery complete [ 68.680697] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 68.807792] usb 2-1.4: reset SuperSpeed USB device number 3 using xhci-hcd [ 68.829899] EXT4-fs (sda1): recovery complete [ 68.829913] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 68.846117] r8152 2-1.4:1.0: Direct firmware load for rtl_nic/rtl8156a-2.fw failed with error -2 [ 68.846155] r8152 2-1.4:1.0: unable to load firmware patch rtl_nic/rtl8156a-2.fw (-2) [ 68.887755] r8152 2-1.4:1.0 (unnamed net_device) (uninitialized): netif_napi_add() called with weight 256 [ 68.903489] r8152 2-1.4:1.0 eth1: v1.12.13 [ 68.903688] usbcore: registered new interface driver r8152 [ 69.000196] random: systemd: uninitialized urandom read (16 bytes read) [ 69.000248] random: systemd: uninitialized urandom read (16 bytes read) [ 69.588914] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn [ 72.831526] random: crng init done [ 72.831543] random: 99 urandom warning(s) missed due to ratelimiting [ 156.715598] systemd[1]: dev-disk-by\x2duuid-406e7e7d\x2d9517\x2d44af\x2dbcde\x2d4de3adbc6b80.device: Job dev-disk-by\x2duuid-406e7e7d\x2d9517\x2d44af\x2dbcde\x2d4de3adbc6b80.device/start timed out. [ 156.715646] systemd[1]: Timed out waiting for device /dev/disk/by-uuid/406e7e7d-9517-44af-bcde-4de3adbc6b80. [ 156.716005] systemd[1]: Dependency failed for /data/glusterfs/sda1. [ 156.716313] systemd[1]: Dependency failed for Local File Systems. [ 156.716609] systemd[1]: Dependency failed for Mark the need to relabel after reboot. [ 156.716924] systemd[1]: selinux-autorelabel-mark.service: Job selinux-autorelabel-mark.service/start failed with result 'dependency'. [ 156.716977] systemd[1]: local-fs.target: Job local-fs.target/start failed with result 'dependency'. [ 156.717002] systemd[1]: local-fs.target: Triggering OnFailure= dependencies. [ 156.718933] systemd[1]: data-glusterfs-sda1.mount: Job data-glusterfs-sda1.mount/start failed with result 'dependency'. [ 156.718982] systemd[1]: dev-disk-by\x2duuid-406e7e7d\x2d9517\x2d44af\x2dbcde\x2d4de3adbc6b80.device: Job dev-disk-by\x2duuid-406e7e7d\x2d9517\x2d44af\x2dbcde\x2d4de3adbc6b80.device/start failed with result 'timeout'. [ 156.900586] zram: Added device: zram0 [ 156.901201] zram: Added device: zram1 [ 156.901843] zram: Added device: zram2 [ 156.915238] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=POLL) [ 156.918923] rk_gmac-dwmac fe300000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 156.927175] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found [ 156.927210] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW [ 156.927768] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode [ 156.956618] zram0: detected capacity change from 0 to 3956192 [ 157.006138] Adding 1978092k swap on /dev/zram0. Priority:5 extents:1 across:1978092k SSFS [ 157.170458] zram1: detected capacity change from 0 to 102400 [ 157.268107] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard. Quota mode: none. [ 157.268158] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff) [ 159.706322] systemd-journald[1325]: Received request to flush runtime journal from PID 1 [ 161.056445] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 161.056494] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready root@helios2:~# journalctl | cat -- Logs begin at Thu 2024-05-09 20:44:18 BST, end at Thu 2024-05-09 20:50:27 BST. -- May 09 20:44:18 helios2 kernel: Booting Linux on physical CPU 0x0000000000 [0x410fd034] May 09 20:44:18 helios2 kernel: Linux version 5.15.93-rockchip64 (root@cf2b4ed83279) (aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #23.02.2 SMP PREEMPT Fri Feb 17 23:48:36 UTC 2023 May 09 20:44:18 helios2 kernel: Machine model: Helios64 May 09 20:44:18 helios2 kernel: efi: UEFI not found. May 09 20:44:18 helios2 kernel: NUMA: No NUMA configuration found May 09 20:44:18 helios2 kernel: NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff] May 09 20:44:18 helios2 kernel: NUMA: NODE_DATA [mem 0xf77cc100-0xf77cdfff] May 09 20:44:18 helios2 kernel: Zone ranges: May 09 20:44:18 helios2 kernel: DMA [mem 0x0000000000200000-0x00000000f7ffffff] May 09 20:44:18 helios2 kernel: DMA32 empty May 09 20:44:18 helios2 kernel: Normal empty May 09 20:44:18 helios2 kernel: Movable zone start for each node May 09 20:44:18 helios2 kernel: Early memory node ranges May 09 20:44:18 helios2 kernel: node 0: [mem 0x0000000000200000-0x00000000f7ffffff] May 09 20:44:18 helios2 kernel: Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff] May 09 20:44:18 helios2 kernel: On node 0, zone DMA: 512 pages in unavailable ranges May 09 20:44:18 helios2 kernel: cma: Reserved 128 MiB at 0x00000000e9000000 May 09 20:44:18 helios2 kernel: psci: probing for conduit method from DT. May 09 20:44:18 helios2 kernel: psci: PSCIv1.0 detected in firmware. May 09 20:44:18 helios2 kernel: psci: Using standard PSCI v0.2 function IDs May 09 20:44:18 helios2 kernel: psci: MIGRATE_INFO_TYPE not supported. May 09 20:44:18 helios2 kernel: psci: SMC Calling Convention v1.0 May 09 20:44:18 helios2 kernel: percpu: Embedded 29 pages/cpu s80984 r8192 d29608 u118784 May 09 20:44:18 helios2 kernel: pcpu-alloc: s80984 r8192 d29608 u118784 alloc=29*4096 May 09 20:44:18 helios2 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 May 09 20:44:18 helios2 kernel: Detected VIPT I-cache on CPU0 May 09 20:44:18 helios2 kernel: CPU features: detected: GIC system register CPU interface May 09 20:44:18 helios2 kernel: CPU features: detected: ARM erratum 845719 May 09 20:44:18 helios2 kernel: Built 1 zonelists, mobility grouping on. Total pages: 999432 May 09 20:44:18 helios2 kernel: Policy zone: DMA May 09 20:44:18 helios2 kernel: Kernel command line: root=UUID=d82ec6f7-ac67-4a80-a092-295ebfdbbd1d rootwait rootfstype=ext4 console=ttyS2,1500000 console=tty1 consoleblank=0 loglevel=1 ubootpart=306d94a6-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 May 09 20:44:18 helios2 kernel: Unknown kernel command line parameters "ubootpart=306d94a6-01 cgroup_enable=memory cgroup_memory=1", will be passed to user space. May 09 20:44:18 helios2 kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) May 09 20:44:18 helios2 kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) May 09 20:44:18 helios2 kernel: mem auto-init: stack:off, heap alloc:on, heap free:off May 09 20:44:18 helios2 kernel: Memory: 3807704K/4061184K available (16000K kernel code, 2692K rwdata, 6712K rodata, 4352K init, 593K bss, 122408K reserved, 131072K cma-reserved) May 09 20:44:18 helios2 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1 May 09 20:44:18 helios2 kernel: trace event string verifier disabled May 09 20:44:18 helios2 kernel: rcu: Preemptible hierarchical RCU implementation. May 09 20:44:18 helios2 kernel: rcu: RCU event tracing is enabled. May 09 20:44:18 helios2 kernel: rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6. May 09 20:44:18 helios2 kernel: Trampoline variant of Tasks RCU enabled. May 09 20:44:18 helios2 kernel: Rude variant of Tasks RCU enabled. May 09 20:44:18 helios2 kernel: Tracing variant of Tasks RCU enabled. May 09 20:44:18 helios2 kernel: rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. May 09 20:44:18 helios2 kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6 May 09 20:44:18 helios2 kernel: NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 May 09 20:44:18 helios2 kernel: GICv3: GIC: Using split EOI/Deactivate mode May 09 20:44:18 helios2 kernel: GICv3: 256 SPIs implemented May 09 20:44:18 helios2 kernel: GICv3: 0 Extended SPIs implemented May 09 20:44:18 helios2 kernel: GICv3: Distributor has no Range Selector support May 09 20:44:18 helios2 kernel: Root IRQ handler: gic_handle_irq May 09 20:44:18 helios2 kernel: GICv3: 16 PPIs implemented May 09 20:44:18 helios2 kernel: GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000 May 09 20:44:18 helios2 kernel: ITS [mem 0xfee20000-0xfee3ffff] May 09 20:44:18 helios2 kernel: ITS@0x00000000fee20000: allocated 65536 Devices @500000 (flat, esz 8, psz 64K, shr 0) May 09 20:44:18 helios2 kernel: ITS: using cache flushing for cmd queue May 09 20:44:18 helios2 kernel: GICv3: using LPI property table @0x00000000004d0000 May 09 20:44:18 helios2 kernel: GIC: using cache flushing for LPI property table May 09 20:44:18 helios2 kernel: GICv3: CPU0: using allocated LPI pending table @0x00000000004e0000 May 09 20:44:18 helios2 kernel: GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] } May 09 20:44:18 helios2 kernel: GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] } May 09 20:44:18 helios2 kernel: arch_timer: cp15 timer(s) running at 24.00MHz (phys). May 09 20:44:18 helios2 kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns May 09 20:44:18 helios2 kernel: sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns May 09 20:44:18 helios2 kernel: Console: colour dummy device 80x25 May 09 20:44:18 helios2 kernel: printk: console [tty1] enabled May 09 20:44:18 helios2 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) May 09 20:44:18 helios2 kernel: pid_max: default: 32768 minimum: 301 May 09 20:44:18 helios2 kernel: LSM: Security Framework initializing May 09 20:44:18 helios2 kernel: Yama: becoming mindful. May 09 20:44:18 helios2 kernel: AppArmor: AppArmor initialized May 09 20:44:18 helios2 kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) May 09 20:44:18 helios2 kernel: Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) May 09 20:44:18 helios2 kernel: rcu: Hierarchical SRCU implementation. May 09 20:44:18 helios2 kernel: Platform MSI: interrupt-controller@fee20000 domain created May 09 20:44:18 helios2 kernel: PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created May 09 20:44:18 helios2 kernel: EFI services will not be available. May 09 20:44:18 helios2 kernel: smp: Bringing up secondary CPUs ... May 09 20:44:18 helios2 kernel: Detected VIPT I-cache on CPU1 May 09 20:44:18 helios2 kernel: GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000 May 09 20:44:18 helios2 kernel: GICv3: CPU1: using allocated LPI pending table @0x00000000004f0000 May 09 20:44:18 helios2 kernel: CPU1: Booted secondary processor 0x0000000001 [0x410fd034] May 09 20:44:18 helios2 kernel: Detected VIPT I-cache on CPU2 May 09 20:44:18 helios2 kernel: GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000 May 09 20:44:18 helios2 kernel: GICv3: CPU2: using allocated LPI pending table @0x0000000000580000 May 09 20:44:18 helios2 kernel: CPU2: Booted secondary processor 0x0000000002 [0x410fd034] May 09 20:44:18 helios2 kernel: Detected VIPT I-cache on CPU3 May 09 20:44:18 helios2 kernel: GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000 May 09 20:44:18 helios2 kernel: GICv3: CPU3: using allocated LPI pending table @0x0000000000590000 May 09 20:44:18 helios2 kernel: CPU3: Booted secondary processor 0x0000000003 [0x410fd034] May 09 20:44:18 helios2 kernel: CPU features: detected: Spectre-v2 May 09 20:44:18 helios2 kernel: CPU features: detected: Spectre-v3a May 09 20:44:18 helios2 kernel: CPU features: detected: Spectre-v4 May 09 20:44:18 helios2 kernel: CPU features: detected: Spectre-BHB May 09 20:44:18 helios2 kernel: CPU features: detected: ARM erratum 1742098 May 09 20:44:18 helios2 kernel: CPU features: detected: ARM errata 1165522, 1319367, or 1530923 May 09 20:44:18 helios2 kernel: Detected PIPT I-cache on CPU4 May 09 20:44:18 helios2 kernel: GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000 May 09 20:44:18 helios2 kernel: GICv3: CPU4: using allocated LPI pending table @0x00000000005a0000 May 09 20:44:18 helios2 kernel: CPU4: Booted secondary processor 0x0000000100 [0x410fd082] May 09 20:44:18 helios2 kernel: Detected PIPT I-cache on CPU5 May 09 20:44:18 helios2 kernel: GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000 May 09 20:44:18 helios2 kernel: GICv3: CPU5: using allocated LPI pending table @0x00000000005b0000 May 09 20:44:18 helios2 kernel: CPU5: Booted secondary processor 0x0000000101 [0x410fd082] May 09 20:44:18 helios2 kernel: smp: Brought up 1 node, 6 CPUs May 09 20:44:18 helios2 kernel: SMP: Total of 6 processors activated. May 09 20:44:18 helios2 kernel: CPU features: detected: 32-bit EL0 Support May 09 20:44:18 helios2 kernel: CPU features: detected: 32-bit EL1 Support May 09 20:44:18 helios2 kernel: CPU features: detected: CRC32 instructions May 09 20:44:18 helios2 kernel: CPU: All CPU(s) started at EL2 May 09 20:44:18 helios2 kernel: alternatives: patching kernel code May 09 20:44:18 helios2 kernel: devtmpfs: initialized May 09 20:44:18 helios2 kernel: Registered cp15_barrier emulation handler May 09 20:44:18 helios2 kernel: Registered setend emulation handler May 09 20:44:18 helios2 kernel: KASLR disabled due to lack of seed May 09 20:44:18 helios2 kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns May 09 20:44:18 helios2 kernel: futex hash table entries: 2048 (order: 5, 131072 bytes, linear) May 09 20:44:18 helios2 kernel: pinctrl core: initialized pinctrl subsystem May 09 20:44:18 helios2 kernel: DMI not present or invalid. May 09 20:44:18 helios2 kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family May 09 20:44:18 helios2 kernel: DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations May 09 20:44:18 helios2 kernel: DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations May 09 20:44:18 helios2 kernel: DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations May 09 20:44:18 helios2 kernel: audit: initializing netlink subsys (disabled) May 09 20:44:18 helios2 kernel: audit: type=2000 audit(0.080:1): state=initialized audit_enabled=0 res=1 May 09 20:44:18 helios2 kernel: thermal_sys: Registered thermal governor 'fair_share' May 09 20:44:18 helios2 kernel: thermal_sys: Registered thermal governor 'bang_bang' May 09 20:44:18 helios2 kernel: thermal_sys: Registered thermal governor 'step_wise' May 09 20:44:18 helios2 kernel: thermal_sys: Registered thermal governor 'user_space' May 09 20:44:18 helios2 kernel: cpuidle: using governor menu May 09 20:44:18 helios2 kernel: hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. May 09 20:44:18 helios2 kernel: ASID allocator initialised with 65536 entries May 09 20:44:18 helios2 kernel: Serial: AMBA PL011 UART driver May 09 20:44:18 helios2 kernel: platform ff770000.syscon:phy@f780: Fixing up cyclic dependency with fe330000.mmc May 09 20:44:18 helios2 kernel: platform ff8f0000.vop: Fixing up cyclic dependency with fec00000.dp May 09 20:44:18 helios2 kernel: platform ff900000.vop: Fixing up cyclic dependency with fec00000.dp May 09 20:44:18 helios2 kernel: rockchip-gpio ff720000.gpio0: probed /pinctrl/gpio0@ff720000 May 09 20:44:18 helios2 kernel: rockchip-gpio ff730000.gpio1: probed /pinctrl/gpio1@ff730000 May 09 20:44:18 helios2 kernel: rockchip-gpio ff780000.gpio2: probed /pinctrl/gpio2@ff780000 May 09 20:44:18 helios2 kernel: rockchip-gpio ff788000.gpio3: probed /pinctrl/gpio3@ff788000 May 09 20:44:18 helios2 kernel: rockchip-gpio ff790000.gpio4: probed /pinctrl/gpio4@ff790000 May 09 20:44:18 helios2 kernel: HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages May 09 20:44:18 helios2 kernel: HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages May 09 20:44:18 helios2 kernel: HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages May 09 20:44:18 helios2 kernel: HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages May 09 20:44:18 helios2 kernel: cryptd: max_cpu_qlen set to 1000 May 09 20:44:18 helios2 kernel: raid6: neonx8 gen() 1666 MB/s May 09 20:44:18 helios2 kernel: raid6: neonx8 xor() 1222 MB/s May 09 20:44:18 helios2 kernel: raid6: neonx4 gen() 1727 MB/s May 09 20:44:18 helios2 kernel: raid6: neonx4 xor() 1269 MB/s May 09 20:44:18 helios2 kernel: raid6: neonx2 gen() 1541 MB/s May 09 20:44:18 helios2 kernel: raid6: neonx2 xor() 1177 MB/s May 09 20:44:18 helios2 kernel: raid6: neonx1 gen() 1200 MB/s May 09 20:44:18 helios2 kernel: raid6: neonx1 xor() 932 MB/s May 09 20:44:18 helios2 kernel: raid6: int64x8 gen() 1001 MB/s May 09 20:44:18 helios2 kernel: raid6: int64x8 xor() 577 MB/s May 09 20:44:18 helios2 kernel: raid6: int64x4 gen() 1001 MB/s May 09 20:44:18 helios2 kernel: raid6: int64x4 xor() 591 MB/s May 09 20:44:18 helios2 kernel: raid6: int64x2 gen() 943 MB/s May 09 20:44:18 helios2 kernel: raid6: int64x2 xor() 524 MB/s May 09 20:44:18 helios2 kernel: raid6: int64x1 gen() 724 MB/s May 09 20:44:18 helios2 kernel: raid6: int64x1 xor() 391 MB/s May 09 20:44:18 helios2 kernel: raid6: using algorithm neonx4 gen() 1727 MB/s May 09 20:44:18 helios2 kernel: raid6: .... xor() 1269 MB/s, rmw enabled May 09 20:44:18 helios2 kernel: raid6: using neon recovery algorithm May 09 20:44:18 helios2 kernel: vcc12v_dcin_bkup: supplied by vcc12v_dcin May 09 20:44:18 helios2 kernel: vcc12v_hdd: supplied by vcc12v_dcin_bkup May 09 20:44:18 helios2 kernel: vcc5v0_perdev: supplied by vcc12v_dcin_bkup May 09 20:44:18 helios2 kernel: vcc5v0_hdd: supplied by vcc12v_dcin_bkup May 09 20:44:18 helios2 kernel: vcc5v0_sys: supplied by vcc12v_dcin_bkup May 09 20:44:18 helios2 kernel: iommu: Default domain type: Translated May 09 20:44:18 helios2 kernel: iommu: DMA domain TLB invalidation policy: strict mode May 09 20:44:18 helios2 kernel: vgaarb: loaded May 09 20:44:18 helios2 kernel: SCSI subsystem initialized May 09 20:44:18 helios2 kernel: libata version 3.00 loaded. May 09 20:44:18 helios2 kernel: usbcore: registered new interface driver usbfs May 09 20:44:18 helios2 kernel: usbcore: registered new interface driver hub May 09 20:44:18 helios2 kernel: usbcore: registered new device driver usb May 09 20:44:18 helios2 kernel: pps_core: LinuxPPS API ver. 1 registered May 09 20:44:18 helios2 kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> May 09 20:44:18 helios2 kernel: PTP clock support registered May 09 20:44:18 helios2 kernel: EDAC MC: Ver: 3.0.0 May 09 20:44:18 helios2 kernel: NetLabel: Initializing May 09 20:44:18 helios2 kernel: NetLabel: domain hash size = 128 May 09 20:44:18 helios2 kernel: NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO May 09 20:44:18 helios2 kernel: NetLabel: unlabeled traffic allowed by default May 09 20:44:18 helios2 kernel: clocksource: Switched to clocksource arch_sys_counter May 09 20:44:18 helios2 kernel: VFS: Disk quotas dquot_6.6.0 May 09 20:44:18 helios2 kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) May 09 20:44:18 helios2 kernel: AppArmor: AppArmor Filesystem Enabled May 09 20:44:18 helios2 kernel: NET: Registered PF_INET protocol family May 09 20:44:18 helios2 kernel: IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) May 09 20:44:18 helios2 kernel: tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) May 09 20:44:18 helios2 kernel: Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) May 09 20:44:18 helios2 kernel: TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) May 09 20:44:18 helios2 kernel: TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) May 09 20:44:18 helios2 kernel: TCP: Hash tables configured (established 32768 bind 32768) May 09 20:44:18 helios2 kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) May 09 20:44:18 helios2 kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) May 09 20:44:18 helios2 kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family May 09 20:44:18 helios2 kernel: NET: Registered PF_XDP protocol family May 09 20:44:18 helios2 kernel: PCI: CLS 0 bytes, default 64 May 09 20:44:18 helios2 kernel: Trying to unpack rootfs image as initramfs... May 09 20:44:18 helios2 kernel: hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available May 09 20:44:18 helios2 kernel: hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available May 09 20:44:18 helios2 kernel: kvm [1]: IPA Size Limit: 40 bits May 09 20:44:18 helios2 kernel: kvm [1]: vgic-v2@fff20000 May 09 20:44:18 helios2 kernel: kvm [1]: GIC system register CPU interface enabled May 09 20:44:18 helios2 kernel: kvm [1]: vgic interrupt IRQ18 May 09 20:44:18 helios2 kernel: kvm [1]: Hyp mode initialized successfully May 09 20:44:18 helios2 kernel: Initialise system trusted keyrings May 09 20:44:18 helios2 kernel: Key type blacklist registered May 09 20:44:18 helios2 kernel: workingset: timestamp_bits=44 max_order=20 bucket_order=0 May 09 20:44:18 helios2 kernel: zbud: loaded May 09 20:44:18 helios2 kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher May 09 20:44:18 helios2 kernel: fuse: init (API version 7.34) May 09 20:44:18 helios2 kernel: integrity: Platform Keyring initialized May 09 20:44:18 helios2 kernel: xor: measuring software checksum speed May 09 20:44:18 helios2 kernel: 8regs : 2541 MB/sec May 09 20:44:18 helios2 kernel: 32regs : 2933 MB/sec May 09 20:44:18 helios2 kernel: arm64_neon : 2353 MB/sec May 09 20:44:18 helios2 kernel: xor: using function: 32regs (2933 MB/sec) May 09 20:44:18 helios2 kernel: Key type asymmetric registered May 09 20:44:18 helios2 kernel: Asymmetric key parser 'x509' registered May 09 20:44:18 helios2 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) May 09 20:44:18 helios2 kernel: io scheduler mq-deadline registered May 09 20:44:18 helios2 kernel: io scheduler kyber registered May 09 20:44:18 helios2 kernel: io scheduler bfq registered May 09 20:44:18 helios2 kernel: dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330 May 09 20:44:18 helios2 kernel: dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12 May 09 20:44:18 helios2 kernel: dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330 May 09 20:44:18 helios2 kernel: dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 May 09 20:44:18 helios2 kernel: vdd_log: supplied by regulator-dummy May 09 20:44:18 helios2 kernel: Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled May 09 20:44:18 helios2 kernel: ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 40, base_baud = 1500000) is a 16550A May 09 20:44:18 helios2 kernel: ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 41, base_baud = 1500000) is a 16550A May 09 20:44:18 helios2 kernel: printk: console [ttyS2] enabled May 09 20:44:18 helios2 kernel: Serial: AMBA driver May 09 20:44:18 helios2 kernel: rockchip-vop ff8f0000.vop: Adding to iommu group 2 May 09 20:44:18 helios2 kernel: rockchip-vop ff900000.vop: Adding to iommu group 3 May 09 20:44:18 helios2 kernel: cacheinfo: Unable to detect cache hierarchy for CPU 0 May 09 20:44:18 helios2 kernel: loop: module loaded May 09 20:44:18 helios2 kernel: tun: Universal TUN/TAP device driver, 1.6 May 09 20:44:18 helios2 kernel: thunder_xcv, ver 1.0 May 09 20:44:18 helios2 kernel: thunder_bgx, ver 1.0 May 09 20:44:18 helios2 kernel: nicpf, ver 1.0 May 09 20:44:18 helios2 kernel: e1000e: Intel(R) PRO/1000 Network Driver May 09 20:44:18 helios2 kernel: e1000e: Copyright(c) 1999 - 2015 Intel Corporation. May 09 20:44:18 helios2 kernel: igb: Intel(R) Gigabit Ethernet Network Driver May 09 20:44:18 helios2 kernel: igb: Copyright (c) 2007-2014 Intel Corporation. May 09 20:44:18 helios2 kernel: igbvf: Intel(R) Gigabit Virtual Function Network Driver May 09 20:44:18 helios2 kernel: igbvf: Copyright (c) 2009 - 2012 Intel Corporation. May 09 20:44:18 helios2 kernel: sky2: driver version 1.30 May 09 20:44:18 helios2 kernel: VFIO - User Level meta-driver version: 0.3 May 09 20:44:18 helios2 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver May 09 20:44:18 helios2 kernel: ehci-pci: EHCI PCI platform driver May 09 20:44:18 helios2 kernel: ehci-platform: EHCI generic platform driver May 09 20:44:18 helios2 kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver May 09 20:44:18 helios2 kernel: ohci-pci: OHCI PCI platform driver May 09 20:44:18 helios2 kernel: ohci-platform: OHCI generic platform driver May 09 20:44:18 helios2 kernel: xhci-hcd xhci-hcd.0.auto: xHCI Host Controller May 09 20:44:18 helios2 kernel: xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 May 09 20:44:18 helios2 kernel: xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x8000000002010010 May 09 20:44:18 helios2 kernel: xhci-hcd xhci-hcd.0.auto: irq 75, io mem 0xfe900000 May 09 20:44:18 helios2 kernel: xhci-hcd xhci-hcd.0.auto: xHCI Host Controller May 09 20:44:18 helios2 kernel: xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 May 09 20:44:18 helios2 kernel: xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed May 09 20:44:18 helios2 kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 May 09 20:44:18 helios2 kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 09 20:44:18 helios2 kernel: usb usb1: Product: xHCI Host Controller May 09 20:44:18 helios2 kernel: usb usb1: Manufacturer: Linux 5.15.93-rockchip64 xhci-hcd May 09 20:44:18 helios2 kernel: usb usb1: SerialNumber: xhci-hcd.0.auto May 09 20:44:18 helios2 kernel: hub 1-0:1.0: USB hub found May 09 20:44:18 helios2 kernel: hub 1-0:1.0: 1 port detected May 09 20:44:18 helios2 kernel: usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. May 09 20:44:18 helios2 kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 May 09 20:44:18 helios2 kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 09 20:44:18 helios2 kernel: usb usb2: Product: xHCI Host Controller May 09 20:44:18 helios2 kernel: usb usb2: Manufacturer: Linux 5.15.93-rockchip64 xhci-hcd May 09 20:44:18 helios2 kernel: usb usb2: SerialNumber: xhci-hcd.0.auto May 09 20:44:18 helios2 kernel: hub 2-0:1.0: USB hub found May 09 20:44:18 helios2 kernel: hub 2-0:1.0: 1 port detected May 09 20:44:18 helios2 kernel: usbcore: registered new interface driver usb-storage May 09 20:44:18 helios2 kernel: mousedev: PS/2 mouse device common for all mice May 09 20:44:18 helios2 kernel: i2c_dev: i2c /dev entries driver May 09 20:44:18 helios2 kernel: fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! May 09 20:44:18 helios2 kernel: vdd_cpu_b: supplied by vcc5v0_sys May 09 20:44:18 helios2 kernel: fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected! May 09 20:44:18 helios2 kernel: vdd_gpu: supplied by vcc5v0_sys May 09 20:44:18 helios2 kernel: dw_wdt ff848000.watchdog: No valid TOPs array specified May 09 20:44:18 helios2 kernel: sdhci: Secure Digital Host Controller Interface driver May 09 20:44:18 helios2 kernel: sdhci: Copyright(c) Pierre Ossman May 09 20:44:18 helios2 kernel: Synopsys Designware Multimedia Card Interface Driver May 09 20:44:18 helios2 kernel: sdhci-pltfm: SDHCI platform and OF driver helper May 09 20:44:18 helios2 kernel: ledtrig-cpu: registered to indicate activity on CPUs May 09 20:44:18 helios2 kernel: hid: raw HID events driver (C) Jiri Kosina May 09 20:44:18 helios2 kernel: usbcore: registered new interface driver usbhid May 09 20:44:18 helios2 kernel: usbhid: USB HID core driver May 09 20:44:18 helios2 kernel: drop_monitor: Initializing network drop monitor service May 09 20:44:18 helios2 kernel: NET: Registered PF_INET6 protocol family May 09 20:44:18 helios2 kernel: usb 1-1: new high-speed USB device number 2 using xhci-hcd May 09 20:44:18 helios2 kernel: Freeing initrd memory: 13060K May 09 20:44:18 helios2 kernel: usb 1-1: New USB device found, idVendor=2109, idProduct=2815, bcdDevice= 7.04 May 09 20:44:18 helios2 kernel: usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 May 09 20:44:18 helios2 kernel: usb 1-1: Product: USB2.0 Hub May 09 20:44:18 helios2 kernel: usb 1-1: Manufacturer: VIA Labs, Inc. May 09 20:44:18 helios2 kernel: hub 1-1:1.0: USB hub found May 09 20:44:18 helios2 kernel: hub 1-1:1.0: 4 ports detected May 09 20:44:18 helios2 kernel: Segment Routing with IPv6 May 09 20:44:18 helios2 kernel: In-situ OAM (IOAM) with IPv6 May 09 20:44:18 helios2 kernel: NET: Registered PF_PACKET protocol family May 09 20:44:18 helios2 kernel: 8021q: 802.1Q VLAN Support v1.8 May 09 20:44:18 helios2 kernel: Key type dns_resolver registered May 09 20:44:18 helios2 kernel: registered taskstats version 1 May 09 20:44:18 helios2 kernel: Loading compiled-in X.509 certificates May 09 20:44:18 helios2 kernel: Loaded X.509 cert 'Build time autogenerated kernel key: 1fb701576c47097ebe5805564f004ecdeffa983a' May 09 20:44:18 helios2 kernel: zswap: loaded using pool zstd/z3fold May 09 20:44:18 helios2 kernel: Key type .fscrypt registered May 09 20:44:18 helios2 kernel: Key type fscrypt-provisioning registered May 09 20:44:18 helios2 kernel: Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes May 09 20:44:18 helios2 kernel: Key type encrypted registered May 09 20:44:18 helios2 kernel: AppArmor: AppArmor sha1 policy hashing enabled May 09 20:44:18 helios2 kernel: usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd May 09 20:44:18 helios2 kernel: pcie_power: supplied by vcc5v0_perdev May 09 20:44:18 helios2 kernel: vcc3v3_sys_s3: supplied by vcc5v0_sys May 09 20:44:18 helios2 kernel: vcc3v0_sd: supplied by vcc3v3_sys_s3 May 09 20:44:18 helios2 kernel: vcc5v0_usb: supplied by vcc5v0_perdev May 09 20:44:18 helios2 kernel: vcc5v0_typec: supplied by vcc5v0_usb May 09 20:44:18 helios2 kernel: usblan_power: supplied by vcc5v0_usb May 09 20:44:18 helios2 kernel: pca953x 2-0020: using no AI May 09 20:44:18 helios2 kernel: rk808 0-001b: chip id: 0x0 May 09 20:44:18 helios2 kernel: rk808-regulator rk808-regulator: there is no dvs0 gpio May 09 20:44:18 helios2 kernel: rk808-regulator rk808-regulator: there is no dvs1 gpio May 09 20:44:18 helios2 kernel: rk808-regulator rk808-regulator: max buck steps per change: 4 May 09 20:44:18 helios2 kernel: vdd_center: supplied by vcc5v0_sys May 09 20:44:18 helios2 kernel: vdd_cpu_l: supplied by vcc5v0_sys May 09 20:44:18 helios2 kernel: vcc_ddr_s3: supplied by vcc5v0_sys May 09 20:44:18 helios2 kernel: vcc1v8_sys_s3: supplied by vcc5v0_sys May 09 20:44:18 helios2 kernel: vcc1v8_dvp: supplied by vcc5v0_sys May 09 20:44:18 helios2 kernel: vcc3v0_touch: supplied by vcc5v0_sys May 09 20:44:18 helios2 kernel: vcc1v8_s3: supplied by vcc5v0_sys May 09 20:44:18 helios2 kernel: vcc_sdio_s0: Bringing 3300000uV into 3000000-3000000uV May 09 20:44:18 helios2 kernel: vcc_sdio_s0: supplied by vcc5v0_sys May 09 20:44:18 helios2 kernel: vcca3v0_codec: supplied by vcc5v0_sys May 09 20:44:18 helios2 kernel: vcc1v5_s3: supplied by vcc5v0_sys May 09 20:44:18 helios2 kernel: vcca1v8_codec: supplied by vcc5v0_sys May 09 20:44:18 helios2 kernel: vcc3v0_s3: supplied by vcc5v0_sys May 09 20:44:18 helios2 kernel: vcc3v3_sys_s0: failed to get the current voltage: -EPROBE_DEFER May 09 20:44:18 helios2 kernel: vcc3v3_sys_s0: supplied by vcc3v3_sys_s3 May 09 20:44:18 helios2 kernel: vcc3v3_s0: supplied by vcc3v3_sys_s3 May 09 20:44:18 helios2 kernel: rk808-rtc rk808-rtc: registered as rtc0 May 09 20:44:18 helios2 kernel: rk808-rtc rk808-rtc: setting system clock to 2024-05-09T19:41:41 UTC (1715283701) May 09 20:44:18 helios2 kernel: dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode. May 09 20:44:18 helios2 kernel: dwmmc_rockchip fe320000.mmc: Using internal DMA controller. May 09 20:44:18 helios2 kernel: dwmmc_rockchip fe320000.mmc: Version ID is 270a May 09 20:44:18 helios2 kernel: dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo May 09 20:44:18 helios2 kernel: dwmmc_rockchip fe320000.mmc: Got CD GPIO May 09 20:44:18 helios2 kernel: vcc1v8_sys_s0: supplied by vcc1v8_sys_s3 May 09 20:44:18 helios2 kernel: vcc0v9_s3: supplied by vcc3v3_sys_s3 May 09 20:44:18 helios2 kernel: avdd_0v9_s0: supplied by vcc1v8_sys_s3 May 09 20:44:18 helios2 kernel: avdd_1v8_s0: supplied by vcc3v3_sys_s3 May 09 20:44:18 helios2 kernel: rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges: May 09 20:44:18 helios2 kernel: rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000 May 09 20:44:18 helios2 kernel: rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000 May 09 20:44:18 helios2 kernel: rockchip-pcie f8000000.pcie: no bus scan delay, default to 0 ms May 09 20:44:18 helios2 kernel: mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) May 09 20:44:18 helios2 kernel: rockchip-pcie f8000000.pcie: wait 0 ms (from device tree) before bus scan May 09 20:44:18 helios2 kernel: rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00 May 09 20:44:18 helios2 kernel: pci_bus 0000:00: root bus resource [bus 00-1f] May 09 20:44:18 helios2 kernel: pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff] May 09 20:44:18 helios2 kernel: pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff]) May 09 20:44:18 helios2 kernel: pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400 May 09 20:44:18 helios2 kernel: pci 0000:00:00.0: supports D1 May 09 20:44:18 helios2 kernel: pci 0000:00:00.0: PME# supported from D0 D1 D3hot May 09 20:44:18 helios2 kernel: pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: [197b:0585] type 00 class 0x010601 May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: reg 0x10: [io size 0x0080] May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: reg 0x14: [io size 0x0080] May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: reg 0x18: [io size 0x0080] May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: reg 0x1c: [io size 0x0080] May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid May 09 20:44:18 helios2 kernel: usb 2-1: New USB device found, idVendor=2109, idProduct=0815, bcdDevice= 7.04 May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: reg 0x20: [io size 0x0080] May 09 20:44:18 helios2 kernel: usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 May 09 20:44:18 helios2 kernel: usb 2-1: Product: USB3.0 Hub May 09 20:44:18 helios2 kernel: usb 2-1: Manufacturer: VIA Labs, Inc. May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x00001fff] May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512) May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: PME# supported from D3hot May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link) May 09 20:44:18 helios2 kernel: pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01 May 09 20:44:18 helios2 kernel: pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff] May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pref] May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa011fff] May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: BAR 0: no space for [io size 0x0080] May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0080] May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: BAR 1: no space for [io size 0x0080] May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: BAR 1: failed to assign [io size 0x0080] May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: BAR 2: no space for [io size 0x0080] May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0080] May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: BAR 3: no space for [io size 0x0080] May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: BAR 3: failed to assign [io size 0x0080] May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: BAR 4: no space for [io size 0x0080] May 09 20:44:18 helios2 kernel: pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0080] May 09 20:44:18 helios2 kernel: pci 0000:00:00.0: PCI bridge to [bus 01] May 09 20:44:18 helios2 kernel: pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff] May 09 20:44:18 helios2 kernel: pcieport 0000:00:00.0: enabling device (0000 -> 0002) May 09 20:44:18 helios2 kernel: pcieport 0000:00:00.0: PME: Signaling with IRQ 89 May 09 20:44:18 helios2 kernel: pcieport 0000:00:00.0: AER: enabled with IRQ 89 May 09 20:44:18 helios2 kernel: ahci 0000:01:00.0: version 3.0 May 09 20:44:18 helios2 kernel: ahci 0000:01:00.0: enabling device (0000 -> 0002) May 09 20:44:18 helios2 kernel: ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled May 09 20:44:18 helios2 kernel: ahci 0000:01:00.0: AHCI 0001.0301 32 slots 5 ports 6 Gbps 0x1f impl SATA mode May 09 20:44:18 helios2 kernel: ahci 0000:01:00.0: flags: 64bit ncq sntf stag pm led clo pmp fbs pio slum part ccc apst boh May 09 20:44:18 helios2 kernel: scsi host0: ahci May 09 20:44:18 helios2 kernel: scsi host1: ahci May 09 20:44:18 helios2 kernel: hub 2-1:1.0: USB hub found May 09 20:44:18 helios2 kernel: hub 2-1:1.0: 4 ports detected May 09 20:44:18 helios2 kernel: scsi host2: ahci May 09 20:44:18 helios2 kernel: scsi host3: ahci May 09 20:44:18 helios2 kernel: scsi host4: ahci May 09 20:44:18 helios2 kernel: ata1: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010100 irq 90 May 09 20:44:18 helios2 kernel: ata2: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010180 irq 91 May 09 20:44:18 helios2 kernel: ata3: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010200 irq 92 May 09 20:44:18 helios2 kernel: ata4: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010280 irq 93 May 09 20:44:18 helios2 kernel: ata5: SATA max UDMA/133 abar m8192@0xfa010000 port 0xfa010300 irq 94 May 09 20:44:18 helios2 kernel: mmc1: CQHCI version 5.10 May 09 20:44:18 helios2 kernel: WCN: marlin_init entry! May 09 20:44:18 helios2 kernel: input: gpio-keys as /devices/platform/gpio-keys/input/input0 May 09 20:44:18 helios2 kernel: of_cfs_init May 09 20:44:18 helios2 kernel: of_cfs_init: OK May 09 20:44:18 helios2 kernel: mmc1: SDHCI controller on fe330000.mmc [fe330000.mmc] using ADMA May 09 20:44:18 helios2 kernel: mmc1: Command Queue Engine enabled May 09 20:44:18 helios2 kernel: mmc1: new HS200 MMC card at address 0001 May 09 20:44:18 helios2 kernel: mmcblk1: mmc1:0001 AJTD4R 14.6 GiB May 09 20:44:18 helios2 kernel: mmcblk1: p1 May 09 20:44:18 helios2 kernel: mmcblk1boot0: mmc1:0001 AJTD4R 4.00 MiB May 09 20:44:18 helios2 kernel: mmcblk1boot1: mmc1:0001 AJTD4R 4.00 MiB May 09 20:44:18 helios2 kernel: mmcblk1rpmb: mmc1:0001 AJTD4R 4.00 MiB, chardev (241:0) May 09 20:44:18 helios2 kernel: usb 2-1.4: new SuperSpeed USB device number 3 using xhci-hcd May 09 20:44:18 helios2 kernel: usb 2-1.4: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00 May 09 20:44:18 helios2 kernel: usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6 May 09 20:44:18 helios2 kernel: usb 2-1.4: Product: USB 10/100/1G/2.5G LAN May 09 20:44:18 helios2 kernel: usb 2-1.4: Manufacturer: Realtek May 09 20:44:18 helios2 kernel: usb 2-1.4: SerialNumber: 000000001 May 09 20:44:18 helios2 kernel: ata1: softreset failed (1st FIS failed) May 09 20:44:18 helios2 kernel: ata1: softreset failed (1st FIS failed) May 09 20:44:18 helios2 kernel: vcc3v0_sd: disabling May 09 20:44:18 helios2 kernel: ata1: softreset failed (1st FIS failed) May 09 20:44:18 helios2 kernel: ata1: limiting SATA link speed to 3.0 Gbps May 09 20:44:18 helios2 kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) May 09 20:44:18 helios2 kernel: ata1: link online but 1 devices misclassified, device detection might fail May 09 20:44:18 helios2 kernel: ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) May 09 20:44:18 helios2 kernel: ata2.00: ATA-10: ST4000DM004-2CV104, 0001, max UDMA/133 May 09 20:44:18 helios2 kernel: ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32), AA May 09 20:44:18 helios2 kernel: ata2.00: configured for UDMA/133 May 09 20:44:18 helios2 kernel: scsi 1:0:0:0: Direct-Access ATA ST4000DM004-2CV1 0001 PQ: 0 ANSI: 5 May 09 20:44:18 helios2 kernel: sd 1:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) May 09 20:44:18 helios2 kernel: sd 1:0:0:0: [sda] 4096-byte physical blocks May 09 20:44:18 helios2 kernel: sd 1:0:0:0: [sda] Write Protect is off May 09 20:44:18 helios2 kernel: sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 May 09 20:44:18 helios2 kernel: sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 09 20:44:18 helios2 kernel: sda: sda1 May 09 20:44:18 helios2 kernel: sd 1:0:0:0: [sda] Attached SCSI disk May 09 20:44:18 helios2 kernel: ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) May 09 20:44:18 helios2 kernel: ata3.00: ATA-10: ST4000DM004-2CV104, 0001, max UDMA/133 May 09 20:44:18 helios2 kernel: ata3.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 32), AA May 09 20:44:18 helios2 kernel: ata3.00: configured for UDMA/133 May 09 20:44:18 helios2 kernel: scsi 2:0:0:0: Direct-Access ATA ST4000DM004-2CV1 0001 PQ: 0 ANSI: 5 May 09 20:44:18 helios2 kernel: sd 2:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) May 09 20:44:18 helios2 kernel: sd 2:0:0:0: [sdb] 4096-byte physical blocks May 09 20:44:18 helios2 kernel: sd 2:0:0:0: [sdb] Write Protect is off May 09 20:44:18 helios2 kernel: sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 May 09 20:44:18 helios2 kernel: sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA May 09 20:44:18 helios2 kernel: sdb: sdb1 May 09 20:44:18 helios2 kernel: sd 2:0:0:0: [sdb] Attached SCSI disk May 09 20:44:18 helios2 kernel: ata4: SATA link down (SStatus 0 SControl 300) May 09 20:44:18 helios2 kernel: ata5: SATA link down (SStatus 0 SControl 300) May 09 20:44:18 helios2 kernel: Freeing unused kernel memory: 4352K May 09 20:44:18 helios2 kernel: Run /init as init process May 09 20:44:18 helios2 kernel: with arguments: May 09 20:44:18 helios2 kernel: /init May 09 20:44:18 helios2 kernel: with environment: May 09 20:44:18 helios2 kernel: HOME=/ May 09 20:44:18 helios2 kernel: TERM=linux May 09 20:44:18 helios2 kernel: ubootpart=306d94a6-01 May 09 20:44:18 helios2 kernel: cgroup_enable=memory May 09 20:44:18 helios2 kernel: cgroup_memory=1 May 09 20:44:18 helios2 kernel: input: adc-keys as /devices/platform/adc-keys/input/input1 May 09 20:44:18 helios2 kernel: rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found May 09 20:44:18 helios2 kernel: rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found May 09 20:44:18 helios2 kernel: rk_gmac-dwmac fe300000.ethernet: PTP uses main clock May 09 20:44:18 helios2 kernel: rk_gmac-dwmac fe300000.ethernet: clock input or output? (input). May 09 20:44:18 helios2 kernel: rk_gmac-dwmac fe300000.ethernet: TX delay(0x28). May 09 20:44:18 helios2 kernel: rk_gmac-dwmac fe300000.ethernet: RX delay(0x20). May 09 20:44:18 helios2 kernel: rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no). May 09 20:44:18 helios2 kernel: rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed May 09 20:44:18 helios2 kernel: rk_gmac-dwmac fe300000.ethernet: clock input from PHY May 09 20:44:18 helios2 kernel: rk_gmac-dwmac fe300000.ethernet: init for RGMII May 09 20:44:18 helios2 kernel: rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35 May 09 20:44:18 helios2 kernel: rk_gmac-dwmac fe300000.ethernet: DWMAC1000 May 09 20:44:18 helios2 kernel: rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported May 09 20:44:18 helios2 kernel: rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported May 09 20:44:18 helios2 kernel: rk_gmac-dwmac fe300000.ethernet: COE Type 2 May 09 20:44:18 helios2 kernel: rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported May 09 20:44:18 helios2 kernel: rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported May 09 20:44:18 helios2 kernel: rk_gmac-dwmac fe300000.ethernet: Normal descriptors May 09 20:44:18 helios2 kernel: rk_gmac-dwmac fe300000.ethernet: Ring mode enabled May 09 20:44:18 helios2 kernel: rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer May 09 20:44:18 helios2 kernel: RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver (mii_bus:phy_addr=stmmac-0:00, irq=POLL) May 09 20:44:18 helios2 kernel: RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver (mii_bus:phy_addr=stmmac-0:01, irq=POLL) May 09 20:44:18 helios2 kernel: async_tx: api initialized (async) May 09 20:44:18 helios2 kernel: EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. May 09 20:44:18 helios2 systemd[1]: Inserted module 'autofs4' May 09 20:44:18 helios2 systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) May 09 20:44:18 helios2 systemd[1]: Detected architecture arm64. May 09 20:44:18 helios2 systemd[1]: Set hostname to <helios2>. May 09 20:44:18 helios2 kernel: dw-apb-uart ff1a0000.serial: forbid DMA for kernel console May 09 20:44:18 helios2 kernel: random: systemd: uninitialized urandom read (16 bytes read) May 09 20:44:18 helios2 systemd[1]: /lib/systemd/system/haveged.service:19: Unknown lvalue 'ProtectHostname' in section 'Service', ignoring May 09 20:44:18 helios2 systemd[1]: /lib/systemd/system/haveged.service:20: Unknown lvalue 'ProtectKernelLogs' in section 'Service', ignoring May 09 20:44:18 helios2 kernel: random: systemd: uninitialized urandom read (16 bytes read) May 09 20:44:18 helios2 systemd[1]: Listening on udev Control Socket. May 09 20:44:18 helios2 systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped. May 09 20:44:18 helios2 kernel: random: systemd: uninitialized urandom read (16 bytes read) May 09 20:44:18 helios2 systemd[1]: Listening on fsck to fsckd communication Socket. May 09 20:44:18 helios2 systemd[1]: Listening on initctl Compatibility Named Pipe. May 09 20:44:18 helios2 systemd[1]: Reached target Swap. May 09 20:44:18 helios2 kernel: lm75 2-004c: supply vs not found, using dummy regulator May 09 20:44:18 helios2 kernel: hwmon hwmon2: temp1_input not attached to any thermal zone May 09 20:44:18 helios2 kernel: lm75 2-004c: hwmon2: sensor 'lm75' May 09 20:44:18 helios2 kernel: EXT4-fs (mmcblk1p1): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none. May 09 20:44:18 helios2 kernel: mc: Linux media interface: v0.10 May 09 20:44:18 helios2 kernel: random: systemd: uninitialized urandom read (16 bytes read) May 09 20:44:18 helios2 kernel: random: systemd: uninitialized urandom read (16 bytes read) May 09 20:44:18 helios2 kernel: random: systemd: uninitialized urandom read (16 bytes read) May 09 20:44:18 helios2 kernel: videodev: Linux video capture interface: v2.00 May 09 20:44:18 helios2 kernel: input: beeper as /devices/platform/beeper/input/input2 May 09 20:44:18 helios2 kernel: sd 1:0:0:0: Attached scsi generic sg0 type 0 May 09 20:44:18 helios2 kernel: sd 2:0:0:0: Attached scsi generic sg1 type 0 May 09 20:44:18 helios2 kernel: rockchip-iep ff670000.iep: Device rockchip-iep registered as /dev/video0 May 09 20:44:18 helios2 kernel: rockchip_vdec: module is from the staging directory, the quality is unknown, you have been warned. May 09 20:44:18 helios2 kernel: rockchip-rga ff680000.rga: HW Version: 0x03.02 May 09 20:44:18 helios2 kernel: hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned. May 09 20:44:18 helios2 kernel: rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video1 May 09 20:44:18 helios2 kernel: rkvdec ff660000.video-codec: Adding to iommu group 1 May 09 20:44:18 helios2 kernel: OF: graph: no port node found in /i2c@ff3d0000/typec-portc@22 May 09 20:44:18 helios2 kernel: hantro-vpu ff650000.video-codec: Adding to iommu group 0 May 09 20:44:18 helios2 kernel: hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video3 May 09 20:44:18 helios2 kernel: hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video4 May 09 20:44:18 helios2 kernel: panfrost ff9a0000.gpu: clock rate = 500000000 May 09 20:44:18 helios2 kernel: rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops) May 09 20:44:18 helios2 kernel: [drm] unsupported AFBC format[3231564e] May 09 20:44:18 helios2 kernel: rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops) May 09 20:44:18 helios2 kernel: rockchip-drm display-subsystem: bound fec00000.dp (ops cdn_dp_component_ops) May 09 20:44:18 helios2 kernel: cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn May 09 20:44:18 helios2 kernel: rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes May 09 20:44:18 helios2 kernel: [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 1 May 09 20:44:18 helios2 kernel: xhci-hcd xhci-hcd.3.auto: xHCI Host Controller May 09 20:44:18 helios2 kernel: xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 3 May 09 20:44:18 helios2 kernel: xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x8000000002010010 May 09 20:44:18 helios2 kernel: xhci-hcd xhci-hcd.3.auto: irq 74, io mem 0xfe800000 May 09 20:44:18 helios2 kernel: xhci-hcd xhci-hcd.3.auto: xHCI Host Controller May 09 20:44:18 helios2 kernel: xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 4 May 09 20:44:18 helios2 kernel: xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed May 09 20:44:18 helios2 kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 May 09 20:44:18 helios2 kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 09 20:44:18 helios2 kernel: usb usb3: Product: xHCI Host Controller May 09 20:44:18 helios2 kernel: usb usb3: Manufacturer: Linux 5.15.93-rockchip64 xhci-hcd May 09 20:44:18 helios2 kernel: usb usb3: SerialNumber: xhci-hcd.3.auto May 09 20:44:18 helios2 kernel: ehci-platform fe380000.usb: EHCI Host Controller May 09 20:44:18 helios2 kernel: panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0 May 09 20:44:18 helios2 kernel: panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400 May 09 20:44:18 helios2 kernel: panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 May 09 20:44:18 helios2 kernel: panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1 May 09 20:44:18 helios2 kernel: hub 3-0:1.0: USB hub found May 09 20:44:18 helios2 kernel: hub 3-0:1.0: 1 port detected May 09 20:44:18 helios2 kernel: usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. May 09 20:44:18 helios2 kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 May 09 20:44:18 helios2 kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 09 20:44:18 helios2 kernel: usb usb4: Product: xHCI Host Controller May 09 20:44:18 helios2 kernel: usb usb4: Manufacturer: Linux 5.15.93-rockchip64 xhci-hcd May 09 20:44:18 helios2 kernel: usb usb4: SerialNumber: xhci-hcd.3.auto May 09 20:44:18 helios2 kernel: hub 4-0:1.0: USB hub found May 09 20:44:18 helios2 kernel: hub 4-0:1.0: 1 port detected May 09 20:44:18 helios2 kernel: cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn May 09 20:44:18 helios2 kernel: [drm] Initialized panfrost 1.2.0 20180908 for ff9a0000.gpu on minor 0 May 09 20:44:18 helios2 kernel: ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5 May 09 20:44:18 helios2 kernel: ehci-platform fe380000.usb: irq 34, io mem 0xfe380000 May 09 20:44:18 helios2 kernel: ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00 May 09 20:44:18 helios2 kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 May 09 20:44:18 helios2 kernel: usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 09 20:44:18 helios2 kernel: usb usb5: Product: EHCI Host Controller May 09 20:44:18 helios2 kernel: usb usb5: Manufacturer: Linux 5.15.93-rockchip64 ehci_hcd May 09 20:44:18 helios2 kernel: usb usb5: SerialNumber: fe380000.usb May 09 20:44:18 helios2 kernel: hub 5-0:1.0: USB hub found May 09 20:44:18 helios2 kernel: hub 5-0:1.0: 1 port detected May 09 20:44:18 helios2 kernel: ohci-platform fe3a0000.usb: Generic Platform OHCI controller May 09 20:44:18 helios2 kernel: ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6 May 09 20:44:18 helios2 kernel: ohci-platform fe3a0000.usb: irq 35, io mem 0xfe3a0000 May 09 20:44:18 helios2 kernel: cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn May 09 20:44:18 helios2 kernel: usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 May 09 20:44:19 helios2 kernel: usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 May 09 20:44:19 helios2 kernel: usb usb6: Product: Generic Platform OHCI controller May 09 20:44:19 helios2 kernel: usb usb6: Manufacturer: Linux 5.15.93-rockchip64 ohci_hcd May 09 20:44:19 helios2 kernel: usb usb6: SerialNumber: fe3a0000.usb May 09 20:44:19 helios2 kernel: hub 6-0:1.0: USB hub found May 09 20:44:19 helios2 kernel: hub 6-0:1.0: 1 port detected May 09 20:44:19 helios2 kernel: EXT4-fs (sdb1): recovery complete May 09 20:44:19 helios2 kernel: EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. May 09 20:44:19 helios2 kernel: usb 2-1.4: reset SuperSpeed USB device number 3 using xhci-hcd May 09 20:44:19 helios2 kernel: EXT4-fs (sda1): recovery complete May 09 20:44:19 helios2 kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. May 09 20:44:19 helios2 kernel: r8152 2-1.4:1.0: Direct firmware load for rtl_nic/rtl8156a-2.fw failed with error -2 May 09 20:44:19 helios2 kernel: r8152 2-1.4:1.0: unable to load firmware patch rtl_nic/rtl8156a-2.fw (-2) May 09 20:44:19 helios2 kernel: r8152 2-1.4:1.0 (unnamed net_device) (uninitialized): netif_napi_add() called with weight 256 May 09 20:44:19 helios2 kernel: r8152 2-1.4:1.0 eth1: v1.12.13 May 09 20:44:19 helios2 kernel: usbcore: registered new interface driver r8152 May 09 20:44:19 helios2 kernel: random: systemd: uninitialized urandom read (16 bytes read) May 09 20:44:19 helios2 kernel: random: systemd: uninitialized urandom read (16 bytes read) May 09 20:44:19 helios2 kernel: cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn May 09 20:44:19 helios2 kernel: random: crng init done May 09 20:44:19 helios2 kernel: random: 99 urandom warning(s) missed due to ratelimiting May 09 20:44:19 helios2 systemd[1]: dev-disk-by\x2duuid-406e7e7d\x2d9517\x2d44af\x2dbcde\x2d4de3adbc6b80.device: Job dev-disk-by\x2duuid-406e7e7d\x2d9517\x2d44af\x2dbcde\x2d4de3adbc6b80.device/start timed out. May 09 20:44:19 helios2 systemd[1]: Timed out waiting for device /dev/disk/by-uuid/406e7e7d-9517-44af-bcde-4de3adbc6b80. May 09 20:44:19 helios2 systemd[1]: Dependency failed for /data/glusterfs/sda1. May 09 20:44:19 helios2 systemd[1]: Dependency failed for Local File Systems. May 09 20:44:19 helios2 systemd[1]: Dependency failed for Mark the need to relabel after reboot. May 09 20:44:19 helios2 systemd[1]: selinux-autorelabel-mark.service: Job selinux-autorelabel-mark.service/start failed with result 'dependency'. May 09 20:44:19 helios2 systemd[1]: local-fs.target: Job local-fs.target/start failed with result 'dependency'. May 09 20:44:19 helios2 systemd[1]: local-fs.target: Triggering OnFailure= dependencies. May 09 20:44:19 helios2 systemd[1]: data-glusterfs-sda1.mount: Job data-glusterfs-sda1.mount/start failed with result 'dependency'. May 09 20:44:19 helios2 systemd[1]: dev-disk-by\x2duuid-406e7e7d\x2d9517\x2d44af\x2dbcde\x2d4de3adbc6b80.device: Job dev-disk-by\x2duuid-406e7e7d\x2d9517\x2d44af\x2dbcde\x2d4de3adbc6b80.device/start failed with result 'timeout'. May 09 20:44:19 helios2 kernel: zram: Added device: zram0 May 09 20:44:19 helios2 kernel: zram: Added device: zram1 May 09 20:44:19 helios2 kernel: zram: Added device: zram2 May 09 20:44:19 helios2 kernel: rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=POLL) May 09 20:44:19 helios2 kernel: rk_gmac-dwmac fe300000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 May 09 20:44:19 helios2 kernel: rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found May 09 20:44:19 helios2 kernel: rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW May 09 20:44:19 helios2 kernel: rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode May 09 20:44:19 helios2 kernel: zram0: detected capacity change from 0 to 3956192 May 09 20:44:19 helios2 kernel: Adding 1978092k swap on /dev/zram0. Priority:5 extents:1 across:1978092k SSFS May 09 20:44:19 helios2 kernel: zram1: detected capacity change from 0 to 102400 May 09 20:44:19 helios2 kernel: EXT4-fs (zram1): mounted filesystem without journal. Opts: discard. Quota mode: none. May 09 20:44:19 helios2 kernel: ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff) May 09 20:44:19 helios2 systemd-journald[1325]: Journal started May 09 20:44:19 helios2 systemd-journald[1325]: Runtime journal (/run/log/journal/25f3942c18884f46bd8ed710d6b0edb4) is 4.8M, max 38.6M, 33.8M free. May 09 20:44:19 helios2 systemd-modules-load[410]: Inserted module 'lm75' May 09 20:44:19 helios2 systemd-modules-load[410]: Inserted module 'ledtrig_netdev' May 09 20:44:19 helios2 systemd-udevd[469]: Using default interface naming scheme 'v240'. May 09 20:44:19 helios2 systemd-udevd[448]: Process '/bin/ln -sf /sys/devices/platform/ff120000.i2c/i2c-2/2-004c/hwmon/hwmon2 /dev/thermal-board' failed with exit code 1. May 09 20:44:19 helios2 systemd-udevd[469]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. May 09 20:44:19 helios2 systemd-udevd[469]: link_config: could not get ethtool features for eth0 May 09 20:44:19 helios2 systemd-udevd[469]: Could not set offload features of eth0: Device or resource busy May 09 20:44:19 helios2 systemd-udevd[452]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. May 09 20:44:19 helios2 systemd-udevd[443]: Process '/bin/ln -sf /sys/devices/virtual/thermal/thermal_zone0/hwmon0 /dev/thermal-cpu' failed with exit code 1. May 09 20:44:19 helios2 systemd-udevd[441]: Using default interface naming scheme 'v240'. May 09 20:44:19 helios2 systemd-udevd[441]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. May 09 20:44:19 helios2 ifup[558]: ifup: waiting for lock on /run/network/ifstate.eth0 May 09 20:44:19 helios2 sh[560]: /etc/resolvconf/update.d/libc: Warning: /etc/resolv.conf is not a symbolic link to /run/resolvconf/resolv.conf May 09 20:44:19 helios2 sh[560]: eth0=eth0 May 09 20:44:19 helios2 armbian-zram-config[562]: Setting up swapspace version 1, size = 1.9 GiB (2025566208 bytes) May 09 20:44:19 helios2 armbian-zram-config[562]: no label, UUID=ed7bfb56-a4cb-453e-9cbd-5fe82531227e May 09 20:44:19 helios2 armbian-zram-config[562]: mke2fs 1.46.2 (28-Feb-2021) May 09 20:44:19 helios2 armbian-zram-config[562]: [74B blob data] May 09 20:44:19 helios2 armbian-zram-config[562]: Creating filesystem with 12800 4k blocks and 12800 inodes May 09 20:44:19 helios2 armbian-zram-config[562]: [41B blob data] May 09 20:44:19 helios2 armbian-zram-config[562]: [38B blob data] May 09 20:44:19 helios2 armbian-zram-config[562]: [75B blob data] May 09 20:44:19 helios2 armbian-hardware-optimization[585]: aplay: device_list:272: no soundcards found... May 09 20:44:19 helios2 armbian-ramlog[975]: e2label: Bad magic number in super-block while trying to open /dev/zram0 May 09 20:44:19 helios2 armbian-hardware-optimization[585]: [ ok ] Setting bfq I/O scheduler for sda May 09 20:44:19 helios2 armbian-hardware-optimization[585]: [ ok ] Setting bfq I/O scheduler for sdb May 09 20:44:19 helios2 armbian-hardware-optimization[585]: [ ok ] Setting none I/O scheduler for mmcblk1 May 09 20:44:19 helios2 armbian-hardware-optimization[585]: [ ok ] Setting none I/O scheduler for mmcblk1boot0 May 09 20:44:19 helios2 armbian-hardware-optimization[585]: [ ok ] Setting none I/O scheduler for mmcblk1boot1 May 09 20:44:19 helios2 armbian-ramlog[975]: Mounting /dev/zram1 as /var/log/ May 09 20:44:19 helios2 armbian-ramlog[975]: Thu 09 May 2024 08:44:16 PM BST: Loading logs from storage May 09 20:44:19 helios2 armbian-ramlog[975]: sending incremental file list May 09 20:44:19 helios2 armbian-ramlog[975]: ./ May 09 20:44:19 helios2 armbian-ramlog[975]: alternatives.log May 09 20:44:19 helios2 armbian-ramlog[975]: armbian-hardware-monitor.log May 09 20:44:19 helios2 armbian-ramlog[975]: auth.log May 09 20:44:19 helios2 armbian-ramlog[975]: bootstrap.log May 09 20:44:19 helios2 armbian-ramlog[975]: btmp May 09 20:44:19 helios2 armbian-ramlog[975]: daemon.log May 09 20:44:19 helios2 armbian-ramlog[975]: debug May 09 20:44:19 helios2 armbian-ramlog[975]: dpkg.log May 09 20:44:19 helios2 armbian-ramlog[975]: faillog May 09 20:44:19 helios2 armbian-ramlog[975]: kern.log May 09 20:44:19 helios2 armbian-ramlog[975]: lastlog May 09 20:44:19 helios2 armbian-ramlog[975]: messages May 09 20:44:19 helios2 armbian-ramlog[975]: nand-sata-install.log May 09 20:44:19 helios2 armbian-ramlog[975]: syslog May 09 20:44:19 helios2 armbian-ramlog[975]: user.log May 09 20:44:19 helios2 armbian-ramlog[975]: wtmp May 09 20:44:19 helios2 armbian-ramlog[975]: apt/ May 09 20:44:19 helios2 armbian-ramlog[975]: apt/history.log May 09 20:44:19 helios2 armbian-ramlog[975]: apt/term.log May 09 20:44:19 helios2 armbian-ramlog[975]: chrony/ May 09 20:44:19 helios2 armbian-ramlog[975]: glusterfs/ May 09 20:44:19 helios2 armbian-ramlog[975]: glusterfs/bitd.log May 09 20:44:19 helios2 armbian-ramlog[975]: glusterfs/cli.log May 09 20:44:19 helios2 armbian-ramlog[975]: glusterfs/cmd_history.log May 09 20:44:19 helios2 armbian-ramlog[975]: glusterfs/data-media.log May 09 20:44:19 helios2 armbian-ramlog[975]: glusterfs/glusterd.log May 09 20:44:19 helios2 armbian-ramlog[975]: glusterfs/media-rebalance.log May 09 20:44:19 helios2 armbian-ramlog[975]: glusterfs/scrub.log May 09 20:44:19 helios2 armbian-ramlog[975]: glusterfs/bricks/ May 09 20:44:19 helios2 armbian-ramlog[975]: glusterfs/bricks/data-glusterfs-sda1-brick1.log May 09 20:44:19 helios2 armbian-ramlog[975]: glusterfs/bricks/data-glusterfs-sdb1-brick1.log May 09 20:44:19 helios2 armbian-ramlog[975]: glusterfs/bricks/data-glusterfs-sdc1-brick1.log May 09 20:44:19 helios2 armbian-ramlog[975]: glusterfs/geo-replication-slaves/ May 09 20:44:19 helios2 armbian-ramlog[975]: glusterfs/geo-replication-slaves/mbr/ May 09 20:44:19 helios2 armbian-ramlog[975]: glusterfs/geo-replication/ May 09 20:44:19 helios2 armbian-ramlog[975]: glusterfs/gfproxy/ May 09 20:44:19 helios2 armbian-ramlog[975]: glusterfs/gfproxy/media/ May 09 20:44:19 helios2 armbian-ramlog[975]: glusterfs/snaps/ May 09 20:44:19 helios2 armbian-ramlog[975]: glusterfs/snaps/media/ May 09 20:44:19 helios2 armbian-ramlog[975]: private/ May 09 20:44:19 helios2 armbian-ramlog[975]: runit/ May 09 20:44:19 helios2 armbian-ramlog[975]: runit/ssh/ May 09 20:44:19 helios2 armbian-ramlog[975]: sysstat/ May 09 20:44:19 helios2 armbian-ramlog[975]: unattended-upgrades/ May 09 20:44:19 helios2 armbian-ramlog[975]: unattended-upgrades/unattended-upgrades-shutdown.log May 09 20:44:19 helios2 armbian-ramlog[975]: sent 9,084,219 bytes received 650 bytes 6,056,579.33 bytes/sec May 09 20:44:19 helios2 armbian-ramlog[975]: total size is 9,079,468 speedup is 1.00 May 09 20:44:19 helios2 systemd[1]: Starting Flush Journal to Persistent Storage... May 09 20:44:19 helios2 systemd-journald[1325]: Runtime journal (/run/log/journal/25f3942c18884f46bd8ed710d6b0edb4) is 4.8M, max 38.6M, 33.8M free. May 09 20:44:19 helios2 systemd[1]: Started Flush Journal to Persistent Storage. May 09 20:44:19 helios2 systemd[1]: Starting Create Volatile Files and Directories... May 09 20:44:19 helios2 systemd[1]: Started Create Volatile Files and Directories. May 09 20:44:19 helios2 systemd[1]: Starting RPC bind portmap service... May 09 20:44:19 helios2 systemd[1]: Starting Update UTMP about System Boot/Shutdown... May 09 20:44:19 helios2 systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm. May 09 20:44:19 helios2 systemd[1]: Started RPC bind portmap service. May 09 20:44:19 helios2 systemd[1]: Reached target RPC Port Mapper. May 09 20:44:19 helios2 systemd[1]: Reached target Remote File Systems (Pre). May 09 20:44:19 helios2 haveged[1354]: haveged: command socket is listening at fd 3 May 09 20:44:19 helios2 systemd[1]: Mounting /data/media... May 09 20:44:19 helios2 systemd[1]: Started Update UTMP about System Boot/Shutdown. May 09 20:44:19 helios2 systemd[1]: Starting Update UTMP about System Runlevel Changes... May 09 20:44:19 helios2 systemd[1]: systemd-update-utmp-runlevel.service: Succeeded. May 09 20:44:19 helios2 systemd[1]: Started Update UTMP about System Runlevel Changes. May 09 20:44:19 helios2 haveged[1354]: haveged: ver: 1.9.14; arch: generic; vend: ; build: (gcc 10.2.1 CTV); collect: 128K May 09 20:44:19 helios2 haveged[1354]: haveged: cpu: (VC); data: 16K (D); inst: 16K (D); idx: 11/40; sz: 15456/64452 May 09 20:44:19 helios2 haveged[1354]: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B): last entropy estimate 7.99723 May 09 20:44:19 helios2 haveged[1354]: haveged: fills: 0, generated: 0 May 09 20:44:20 helios2 kernel: rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off May 09 20:44:20 helios2 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready May 09 20:44:21 helios2 systemd[579]: emergency.service: Executable /bin/plymouth missing, skipping: No such file or directory May 09 20:44:22 helios2 mount[1355]: Mounting glusterfs on /data/media failed. May 09 20:44:22 helios2 systemd[1]: data-media.mount: Mount process exited, code=exited, status=1/FAILURE May 09 20:44:22 helios2 systemd[1]: Mounted /data/media. May 09 20:44:22 helios2 systemd[1]: Reached target Remote File Systems. May 09 20:44:22 helios2 systemd[1]: Startup finished in 1min 6.014s (kernel) + 1min 37.173s (userspace) = 2min 43.188s. May 09 20:48:11 helios2 sudo[1764]: root : TTY=ttyS2 ; PWD=/root ; USER=root ; COMMAND=/usr/bin/apt info armbian-bsp-cli-helios64 May 09 20:48:11 helios2 sudo[1764]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=0) May 09 20:48:12 helios2 sudo[1764]: pam_unix(sudo:session): session closed for user root May 09 20:49:01 helios2 sudo[2123]: root : TTY=ttyS2 ; PWD=/root ; USER=root ; COMMAND=/usr/bin/apt info armbian-bsp-cli-helios64 May 09 20:49:01 helios2 sudo[2123]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=0) May 09 20:49:02 helios2 sudo[2123]: pam_unix(sudo:session): session closed for user root May 09 20:50:27 helios2 sudo[2130]: root : TTY=ttyS2 ; PWD=/root ; USER=root ; COMMAND=/usr/sbin/service status --all May 09 20:50:27 helios2 sudo[2130]: pam_unix(sudo:session): session opened for user root(uid=0) by (uid=0) May 09 20:50:27 helios2 sudo[2130]: pam_unix(sudo:session): session closed for user root```
-
Hello everybody, I would like to sell my helios4 and helios64. They weren't in operation much and are like new. So they are perfect for spare parts or to use them as a complete replacement. I really like the products but I don't want the hustle of fiddling around with every new armbian release. So if anybody is interested you can contact me and/or write here a comment. Thank you very much!
-
Just a reminder, if someone wants to fix it.
-
I have a Helios64 that I recently reinstalled/updated to the latest Armbain Jammy image after not updating for quite some time and finding some of the repos to be dead. Without the drives initialized the system seems like it will run for days, but with the drives initialized (ZFS), I will get the below error after a few hours of uptime (~8-10 hours). I have seen some threads saying to set the CPU clock to one speed to fix the issue and some people installing a newer kernel (via beta.armbian.com). If anyone has any thoughts on how I could try and make this more stable I would appreciate it. [477435.475903] rcu: INFO: rcu_preempt self-detected stall on CPU [477435.476481] rcu: 3-....: (90606038 ticks this GP) idle=8c74/1/0x4000000000000000 softirq=715905/93001225 fqs=43038032 [477435.477488] rcu: (t=90606039 jiffies g=2287601 q=1361150 ncpus=6) [477549.183778] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 1-.... 3-.... } 65978929 jiffies s: 781 root: 0xa/. [477549.184885] rcu: blocking rcu_node structures (internal RCU debug): [477615.481330] rcu: INFO: rcu_preempt self-detected stall on CPU [477615.481904] rcu: 3-....: (90651041 ticks this GP) idle=8c74/1/0x4000000000000000 softirq=715905/93047138 fqs=43059171 [477615.482913] rcu: (t=90651042 jiffies g=2287601 q=1361150 ncpus=6) [477729.401197] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 1-.... 3-.... } 66023985 jiffies s: 781 root: 0xa/. [477729.402304] rcu: blocking rcu_node structures (internal RCU debug): [477795.486758] rcu: INFO: rcu_preempt self-detected stall on CPU [477795.487338] rcu: 3-....: (90696044 ticks this GP) idle=8c74/1/0x4000000000000000 softirq=715905/93092997 fqs=43080230 [477795.488344] rcu: (t=90696045 jiffies g=2287601 q=1361150 ncpus=6) [477909.618629] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 1-.... 3-.... } 66069041 jiffies s: 781 root: 0xa/. [477909.619735] rcu: blocking rcu_node structures (internal RCU debug): [477975.492185] rcu: INFO: rcu_preempt self-detected stall on CPU [477975.492764] rcu: 3-....: (90741047 ticks this GP) idle=8c74/1/0x4000000000000000 softirq=715905/93138939 fqs=43101769 [477975.493771] rcu: (t=90741048 jiffies g=2287601 q=1361150 ncpus=6) [478089.836039] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 1-.... 3-.... } 66114097 jiffies s: 781 root: 0xa/. [478089.837147] rcu: blocking rcu_node structures (internal RCU debug):
-
I tried to install OMV 7 RC1 on the Bookworm image, but I get a lot of "Segmentation fault" and "free(): invalid pointer" error messages. My Installation for the Bookworm image... Is the problem due to the Bookworm image or the 6.6.8 kernel or should I contact the OMV team? Here is the complete log of the OMV 7 RC1 installation...
-
If so how'd ya do it!?!? My personal experience had been a rock solid device on the original official Debian Armbian image (Linux Kernel: 5.10), and OMV5. It never went down unless I manually rebooted, and I never needed any CPU governor changes, voltage changes or otherwise to keep it stable. Reading so much stuff about OMV5 being end of life made me pull the trigger on upgrade to OMV6 along with the kernel upgrade that OMV did automatically, at the time unaware of the state of Kobol and Armbian support. Now I get about 1-2 days on average before it KPs and I have to hit the reset button. Tried the CPU underclocking, performance setting, VDD boost and various combinations but to no avail. So just reaching out to any other users here, is anyone still rocking a stable unit in 2023? Did you have to revert to Buster / OMV5? Are there any other tweaks to try that I've missed other than CPU clock/profile/vdd tweak? Is there any way to get any information on why it might be happening? Or is the only way to have a hardware serial console open 24/7 via a usb cable?
-
Hello! I'm able to reproducibly get a kernel oops whenever I start a docker container on my Helios64 The SD card I was running my Helios64 from died and so I reinstalled Armbian using the steps to install bookworm from this post. I did skip the steps related to hs400 and L2 cache as I'm currently running the system from an SD card. After the install seemed to be working well I installed zfs, imported my existing pool, and then installed docker. My previous setup was using docker's ZFS storage driver so I got that configured as well. Now, whenever I start up a docker container (ie by running "sudo docker run hello-world") I get the following oops from the kernel: [ 246.422387] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038 [ 246.422400] Mem abort info: [ 246.422403] ESR = 0x0000000096000005 [ 246.422406] EC = 0x25: DABT (current EL), IL = 32 bits [ 246.422411] SET = 0, FnV = 0 [ 246.422414] EA = 0, S1PTW = 0 [ 246.422417] FSC = 0x05: level 1 translation fault [ 246.422421] Data abort info: [ 246.422423] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 246.422426] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 246.422430] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 246.422434] user pgtable: 4k pages, 48-bit VAs, pgdp=000000000942d000 [ 246.422439] [0000000000000038] pgd=0800000016225003, p4d=0800000016225003, pud=0000000000000000 [ 246.422452] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 246.423015] Modules linked in: veth xt_nat xt_tcpudp xt_conntrack nft_chain_nat xt_MASQUERADE nf_nat nf_conntrack_netlink nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xfrm_user xfrm_algo xt_addrtype nft_compat nf_tables nfnetlink br_netfilter bridge rfkill sunrpc lz4hc lz4 zram binfmt_misc zfs(PO) crct10dif_ce leds_pwm panfrost spl(O) gpio_charger gpu_sched drm_shmem_helper pwm_fan snd_soc_hdmi_codec snd_soc_rockchip_i2s rockchip_vdec(C) hantro_vpu rk_crypto snd_soc_core rockchip_rga snd_compress v4l2_vp9 v4l2_h264 videobuf2_dma_sg videobuf2_dma_contig ac97_bus v4l2_mem2mem snd_pcm_dmaengine snd_pcm videobuf2_memops videobuf2_v4l2 snd_timer videodev nvmem_rockchip_efuse videobuf2_common mc snd soundcore gpio_beeper ledtrig_netdev lm75 ip_tables x_tables autofs4 efivarfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear cdc_ncm cdc_ether usbnet r8152 realtek rockchipdrm dw_mipi_dsi fusb302 dw_hdmi tcpm analogix_dp dwmac_rk typec drm_display_helper stmmac_platform cec [ 246.423214] drm_dma_helper stmmac drm_kms_helper drm adc_keys pcs_xpcs [ 246.431612] CPU: 5 PID: 2686 Comm: dockerd Tainted: P C O 6.6.8-edge-rockchip64 #1 [ 246.432383] Hardware name: Helios64 (DT) [ 246.432731] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 246.433344] pc : get_device_state+0x28/0x88 [ledtrig_netdev] [ 246.433854] lr : netdev_trig_notify+0x13c/0x1fc [ledtrig_netdev] [ 246.434387] sp : ffff80008b2ab3e0 [ 246.434680] x29: ffff80008b2ab3e0 x28: ffff0000154d3378 x27: ffff80007a36dc30 [ 246.435313] x26: ffff800081c89a40 x25: ffff800081907008 x24: ffff80008b2ab5b8 [ 246.435944] x23: 000000000000000b x22: ffff000005efb000 x21: ffff0000154d3300 [ 246.436575] x20: ffff0000154d3378 x19: ffff0000154d3300 x18: ffff80008d293c58 [ 246.437206] x17: 000000040044ffff x16: 00500074b5503510 x15: 0000000000000000 [ 246.437837] x14: ffffffffffffffff x13: 0000000000000020 x12: 0101010101010101 [ 246.438468] x11: 7f7f7f7f7f7f7f7f x10: 000000000f5d83a0 x9 : 0000000000000020 [ 246.439099] x8 : 0101010101010101 x7 : 0000000080000000 x6 : 0000000080303663 [ 246.439729] x5 : 6336300000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 246.440360] x2 : ffff000021bdbc00 x1 : ffff000021bdbc00 x0 : 0000000000000000 [ 246.440991] Call trace: [ 246.441210] get_device_state+0x28/0x88 [ledtrig_netdev] [ 246.441683] netdev_trig_notify+0x13c/0x1fc [ledtrig_netdev] [ 246.442185] notifier_call_chain+0x74/0x144 [ 246.442561] raw_notifier_call_chain+0x18/0x24 [ 246.442956] call_netdevice_notifiers_info+0x58/0xa4 [ 246.443399] dev_change_name+0x190/0x318 [ 246.443751] do_setlink+0xb7c/0xde4 [ 246.444064] rtnl_setlink+0xf8/0x194 [ 246.444383] rtnetlink_rcv_msg+0x12c/0x398 [ 246.444748] netlink_rcv_skb+0x5c/0x128 [ 246.445089] rtnetlink_rcv+0x18/0x24 [ 246.445408] netlink_unicast+0x2e8/0x350 [ 246.445755] netlink_sendmsg+0x1d4/0x444 [ 246.446102] __sock_sendmsg+0x5c/0xac [ 246.446432] __sys_sendto+0x124/0x150 [ 246.446760] __arm64_sys_sendto+0x28/0x38 [ 246.447117] invoke_syscall+0x48/0x114 [ 246.447453] el0_svc_common.constprop.0+0x40/0xe8 [ 246.447871] do_el0_svc+0x20/0x2c [ 246.448168] el0_svc+0x40/0xf4 [ 246.448442] el0t_64_sync_handler+0x13c/0x158 [ 246.448829] el0t_64_sync+0x190/0x194 [ 246.449158] Code: f9423c20 f90047e0 d2800000 f9404e60 (f9401c01) [ 246.449695] ---[ end trace 0000000000000000 ]--- TIA for the help and for keeping this unsupported hardware alive!
-
Hi, I use Helios64 from the begin and this board is very unstable according to my experience and many posts here... After many dialogue here and settings shared about Frequency and Governor Kernel... maybe i find the problem and i ask anyone return of experiences about the procedure and setting belong: - Connect USB Wireless Dongle or USB(-c) Ethernet Plug - Configure it - Disconnect all ethernet cable to the board - Use with last time crash configuration and do a endurance test your helios64 board Have a good day
-
Upgrading Helios64 from Armbian Buster to Bullseye (see below) works as expected on my system. However, I am using systemd-networkd and just a few services (nextcloud, netatalk, etc. and not ZFS) EDIT: Upgrading Buster installations to Bullseye also works fine if you use network-manager, even if you have a bridge configured (using bridge-slave; binutils-bridge). # cat /etc/os-release PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" _ _ _ _ __ _ _ | | | | ___| (_) ___ ___ / /_ | || | | |_| |/ _ \ | |/ _ \/ __| '_ \| || |_ | _ | __/ | | (_) \__ \ (_) |__ _| |_| |_|\___|_|_|\___/|___/\___/ |_| Welcome to Armbian 21.08.1 Bullseye with Linux 5.10.43-rockchip64 System load: 2% Up time: 12:29 Memory usage: 19% of 3.77G IP: xx.xx.xx.xx CPU temp: 42°C Usage of /: 41% of 15G storage/: 57% of 3.6T Edit: Attention - if you upgrade your Buster or Bullseye installation on emmc to Armbian 21.08.1 it will not be writable anymore. You will then have to downgrade linux on emmc from 5.10.60 to 5.10.43 as described in this thread. Edit: There is a temporary fix for the problem. See this message from @piter75 To upgrade Armbian Buster to Bullseye, first disable Armbian updates in /etc/apt/sources.list.d/Armbian.list for the time being. Then fully upgrade Buster (sudo apt update && sudo apt upgrade -y) , then change the apt sources (see below) followed by 'sudo apt update && sudo apt full-upgrade'. I kept all the configuration files by confirming 'N' in the following dialogue. # cat /etc/apt/sources.list deb http://deb.debian.org/debian/ bullseye main deb-src http://deb.debian.org/debian/ bullseye-updates main deb http://security.debian.org/debian-security bullseye-security main deb-src http://security.debian.org/debian-security bullseye-security main deb http://ftp.debian.org/debian bullseye-backports main
-
Dear to all, I have a Helios64 unit with 2 hdd (both WD60EFRX). I have bought also an external enclousure UGREEN 5 Bay Hard Drive Enclosure ( https://eu.ugreen.com/collections/hard-drive-enclosures/products/ugreen-5-bay-hard-drive-enclosure-5-x-18tb-raid-array-hard-disk-docking-station ) and 2 WD140EDGZ and these 2 hdd are mounted inside UGREEN enclousure because I want format and test it (when all will work fine I'll exchange a WD60EFRX with a WD140EDGZ so the drives inside the enclousure will have a backup scope). The enclousure is powered by external adapter, the system image installed is the Armbian 22.02.1 with Linux kernel 5.15.93-rockchip 64 and openmediavault 6.6.0-2 (Shaitan). If I have the enclousure turned off and from open media vault access to smart drive section (storage -> S.M.A.R.T. -> device section), the smart information (related to the 2 WD60EFRX) are showed in about 4-5 seconds but if I turn on the enclousure with the 2 device WD140EDGZ , the smart drive section is showed after 4 minutes. Sometimes the section isn't showed but it's showed an error message "Http failure response for http://192.168.1.44/rpc.php: 504 Gateway Time-out". I'm sure that this problem occur also with the transfer of files (hoping that doesn't occur wrong data information transfer with damaged files also) and I have already googled for this issue on the web but I haven't found nothing that help me to solve the issue. I attach here the 2 dmesg output that I have take from 2 distinct session with putty dmesg of first session dmesg of second session my question is: the problem it's related from standard drivers inside the image, from the kernel or it's necessary take manufacturer driver source and compile it? How can I solve this issue? Hope that somebody help me Best regards
-
Hi, Today i make upgrade to 23.11 armbian on my Helios64. It's in bookworm version (apt source list is good, no change since 23.08) but now it display this: Welcome to Armbian 23.11.1 Buster with Linux 6.1.63-current-rockchip64 No end-user support: community creations & unsupported (buster) userspace! it's a bug? thank have a nice day