my bananapi as lomobo-r1 autoconfigured?

[apuokas]

hallo,

 

i downloaded debian jessy image with kernel 4.0.5 from there: http://mirror.igorpecovnik.com/Lamobo-r1_Debian_3.1_jessie_4.0.5.zipand installed it on bananapi.

at first boot seems to be system self-autoconfigured and reboots. Now i see that /etc/network/interfaces is linked with interfaces.r1 and in /boot i found those files: config-4.0.5-lamobo-r1,  System.map-4.0.5-lamobo-r1, vmlinuz-4.0.5-lamobo-r1. can it be that autoconfiguration has my bpi as router configured. How can i fix that manualy?

 

nex question: on the boot i see one pinguine, but while bpi has 2 cores it shoul be 2 pinguins or not ?

 

best regards

Marijus

[tkaiser]

i downloaded debian jessy image with kernel 4.0.5 from there: http://mirror.igorpecovnik.com/Lamobo-r1_Debian_3.1_jessie_4.0.5.zipand installed it on bananapi.

 

So you downloaded the wrong image or use the wrong board? If you really want Jessie on the Banana Pi then use eg. this: http://mirror.igorpecovnik.com/Bananapi_Debian_3.2_jessie_4.1.2.zip

[apuokas]

upps

your are right. sorry for this question. i was blind on downloading.

[Igor]

nex question: on the boot i see one pinguine, but while bpi has 2 cores it shoul be 2 pinguins or not   ?

 

There are no penguins on my build - disabled by choice.

[apuokas]

but on the boot i bocomme one penguin that in booting process switshing to armbian logo. There the link i used to download the image: http://mirror.igorpecovnik.com/Lamobo-r1_Debian_3.1_jessie_4.0.5.zip

[Igor]

Oh, that penguin is from u-boot.

 

Get latest image. I rebuild them yesterday.

[apuokas]

ok, ill make

thank you