Armin Posted May 16, 2020 Posted May 16, 2020 (edited) Hello, On my new X96 Air 4/32Gb, I have 1. Booted on the SD card (version Armbian_20.02.0-rc1.037_Aml-s9xxx_bionic_current_5.5.0-rc6_desktop_20200205 created with Etcher and replaced files from NicoD for the color issue) 2. Created a backup of the eMMC 3. Install Armbian on the eMMC following these instructions Spoiler jeedom@aml:~$ cd /boot jeedom@aml:/boot$ sudo cp u-boot.ext u-boot.sd [sudo] password for jeedom: jeedom@aml:/boot$ cd jeedom@aml:~$ sudo /root/install-aml.sh Start script create MBR and filesystem /dev/mmcblk0 Start backup u-boot default 4+0 records in 4+0 records out 4194304 bytes (4.2 MB, 4.0 MiB) copied, 0.256238 s, 16.4 MB/s Start create MBR and partittion Start restore u-boot 442+0 records in 442+0 records out 442 bytes copied, 0.00434929 s, 102 kB/s 8191+0 records in 8191+0 records out 4193792 bytes (4.2 MB, 4.0 MiB) copied, 0.443847 s, 9.4 MB/s Done Start copy system for eMMC. Formatting BOOT partition...mkfs.fat 4.1 (2017-01-24) done. Cppying BOOT...done. Edit init config...done. Formatting ROOT partition... /dev/mmcblk0p2 contains a ext4 file system labelled 'ROOT_EMMC' last mounted on /ddbr/install on Sat May 16 22:18:58 2020 e2fsck 1.44.1 (24-Mar-2018) ROOT_EMMC: clean, 11/1851392 files, 160257/7400192 blocks done. Copying ROOTFS. Copy BIN Create DEV Copy ETC Copy HOME Copy LIB Create MEDIA Create MNT Copy OPT Create PROC Copy ROOT Create RUN Copy SBIN Copy SELINUX Copy SRV Create SYS Create TMP Copy USR Copy VAR Copy fstab ******************************************* Complete copy OS to eMMC ******************************************* jeedom@aml:~$ I have shutdown the system, remove the power supply, remove the SD Card and reconnect the power supply. But unfortunately, the system doesn't want to boot from eMMC (loops with HDMI detected (but blackscreen) and no HDMI detected) Do you have an idea to solve this issue ? Edited May 16, 2020 by Armin
itchy'n'scratchy Posted May 16, 2020 Posted May 16, 2020 @balbes150 Is it correct that aml_autoscript.zip has a size of 0b? Can I download a working version somewhere?
root-stas Posted May 17, 2020 Posted May 17, 2020 @balbes150 terrible negotiator Can you explain, why do you delete from panfrost kernel module power regulator checker? That's temporary workaround or not important behavior? From your experience, how long we need wait until G31/52 has working driver for X11 or Wayland? Copple of month, or years?
root-stas Posted May 17, 2020 Posted May 17, 2020 (edited) @balbes150 can you have time to add this patch? https://github.com/hyphop/fenix/blob/6aa6a0d509902724e2dba6a29d2a83efffde0ed4/packages/u-boot-mainline/patches/caad316b3165615f1a4848901811a4a084444c9d/0220-hdmi_edid_fail_try_full_hd.patch On old HDMI TV that's fix jumping image on screen. Yet to workaround need boot with video=1280x720 uEnv.txt command and add in Screen section records about 1080p to xorg.conf. Thanks Edited May 17, 2020 by root-stas
mradalbert Posted May 17, 2020 Posted May 17, 2020 (edited) Hi guys, I'm all new to Armbian. I'm trying to boot Armbian_20.02.0-rc1.038_Aml-s9xxx_eoan_current_5.5.0-rc6_desktop_20200205 on tv box Vontar X3 (Amlogic s905x3). I tried to set meson-sm1-sei610.dtb in uEnv.txt without success. Then I extracted DTB ftom my device boot.img using this tool. Unfortunately extracted DTB file did not help. I'm always getting error message in recovery: Supported API: 3 charge_status 2, charged 1, status SUCCESS, capacity 100 Finding update package... Opening update package... E:Block map file is too short: 3 E:Map of '@/cache/recovery/block.map' failed E:failed to map file Installation aborted. Just now I have noticed that aml_autoscript.zip that I'm executing as update is empty so it could be the problem. Here are files I have extracted from boot.img: https://drive.google.com/open?id=12DJoBFrRRP1v2r0ntPCz5LYXP4DRZL1A I'm pretty clueless what I can do to make it work. Any help will be much appreciated. Edited May 17, 2020 by mradalbert added SoC model
SteeMan Posted May 17, 2020 Posted May 17, 2020 1 hour ago, mradalbert said: Just now I have noticed that aml_autoscript.zip that I'm executing as update is empty so it could be the problem. Here are files I have extracted from boot.img: https://drive.google.com/open?id=12DJoBFrRRP1v2r0ntPCz5LYXP4DRZL1A I'm pretty clueless what I can do to make it work. Any help will be much appreciated. Not knowing everything you have tried, let me give a couple of suggestions: 1) You are using an old build, please use the latest builds from the forum thread "Single Armbian image for RK + AML + AW" and follow the instructions in the first post of that thread. 2) The android based dtb files are of no value when working with 5.x based linux kernels so don't waste time going down that path. 3) The aml_autoscript.zip file you are seeing is correct for the purpose it is being used 4) Make sure to notice the red print in the instructions for the newest builds regarding working from a 'clean' android environment. If you have previously installed or attempted to install other software (likel coreelec) you will need to reinstall the android firmware to completely remove traces of other linux based os's before being successful in installing these tv box armbian builds.
root-stas Posted May 17, 2020 Posted May 17, 2020 2 hours ago, balbes150 said: For all. I don't support s905x3. I don't have this equipment. All messages about this platform will be transferred to another topic. What works or doesn't work from this equipment - I don't know. I do not give any answers or comments on the s905x3 chip. How can I help you with testing/debugging? Or order one TV box with that chip to you? I'm in Ukraine.
balbes150 Posted May 17, 2020 Posted May 17, 2020 30 minutes ago, root-stas said: How can I help you with testing/debugging? Such tests can only help with a small problem for a specific model. 30 minutes ago, root-stas said: Or order one TV box with that chip to you? I'm in Ukraine. Thanks for the offer. But I think you are not rich enough to sponsor an increase in profits (improving consumer properties) for Chinese manufacturers. They don't worry about it themselves. In addition, I think you do not have access to special technical information that can significantly speed up the process of completion and debugging.
root-stas Posted May 17, 2020 Posted May 17, 2020 (edited) 31 minutes ago, balbes150 said: Such tests can only help with a small problem for a specific model. I know, but if that helping, why not? All presented TV box on S9005X3 yet (~8 models) on same board, only have manipulation with wifi/bt modules and some have USB hub on pcie line. I'm working on get proper dtsi file for them. 31 minutes ago, balbes150 said: improving consumer properties Anyway, if you want, I'm on board Edited May 17, 2020 by root-stas
Armin Posted May 17, 2020 Posted May 17, 2020 22 hours ago, Armin said: Hello, On my new X96 Air 4/32Gb, I have 1. Booted on the SD card (version Armbian_20.02.0-rc1.037_Aml-s9xxx_bionic_current_5.5.0-rc6_desktop_20200205 created with Etcher and replaced files from NicoD for the color issue) 2. Created a backup of the eMMC 3. Install Armbian on the eMMC following these instructions Reveal hidden contents jeedom@aml:~$ cd /boot jeedom@aml:/boot$ sudo cp u-boot.ext u-boot.sd [sudo] password for jeedom: jeedom@aml:/boot$ cd jeedom@aml:~$ sudo /root/install-aml.sh Start script create MBR and filesystem /dev/mmcblk0 Start backup u-boot default 4+0 records in 4+0 records out 4194304 bytes (4.2 MB, 4.0 MiB) copied, 0.256238 s, 16.4 MB/s Start create MBR and partittion Start restore u-boot 442+0 records in 442+0 records out 442 bytes copied, 0.00434929 s, 102 kB/s 8191+0 records in 8191+0 records out 4193792 bytes (4.2 MB, 4.0 MiB) copied, 0.443847 s, 9.4 MB/s Done Start copy system for eMMC. Formatting BOOT partition...mkfs.fat 4.1 (2017-01-24) done. Cppying BOOT...done. Edit init config...done. Formatting ROOT partition... /dev/mmcblk0p2 contains a ext4 file system labelled 'ROOT_EMMC' last mounted on /ddbr/install on Sat May 16 22:18:58 2020 e2fsck 1.44.1 (24-Mar-2018) ROOT_EMMC: clean, 11/1851392 files, 160257/7400192 blocks done. Copying ROOTFS. Copy BIN Create DEV Copy ETC Copy HOME Copy LIB Create MEDIA Create MNT Copy OPT Create PROC Copy ROOT Create RUN Copy SBIN Copy SELINUX Copy SRV Create SYS Create TMP Copy USR Copy VAR Copy fstab ******************************************* Complete copy OS to eMMC ******************************************* jeedom@aml:~$ I have shutdown the system, remove the power supply, remove the SD Card and reconnect the power supply. But unfortunately, the system doesn't want to boot from eMMC (loops with HDMI detected (but blackscreen) and no HDMI detected) Do you have an idea to solve this issue ? Hello, Without answer, I have tried to perform several tests: 1. burnt SD card with these recommendations: https://forum.armbian.com/topic/12988-armbian-for-amlogic-s905x3/page/4/?tab=comments#comment-97143 ==> no boot from SD card 2. burnt SD card with these versions: Armbian_20.05.4_Arm-64_bionic_current_5.7.0-rc5_desktop_20200516.img and Armbian_20.05.0_Arm-64_bionic_current_5.6.0-rc6_desktop_20200326.img ==> no boot from SD card 3. Burnt SD card with the version Armbian_20.02.0-rc1.037_Aml-s9xxx_bionic_current_5.5.0-rc6_desktop_20200205.img (I do not remerber why I have found this version) 3.1 Add meson-sm1-sei610-ethfix.dtb into \dtb\amlogic 3.2 Declare it into uEnv.txt Spoiler # aml s9xxx FDT=/dtb/amlogic/meson-g12b-odroid-n2.dtb FDT=/dtb/amlogic/meson-sm1-sei610-ethfix.dtb APPEND=root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 3.3 Rename u-boot.sd to u-boot.ext ==> Boot from SD card is OK. 3.4 I have seen 2 drives (ROOT_EMMC and BOOT_EMMC) so I imageine this is the previous installation on the eMMC ==> unmount these 2 drives 3.5 Prepare the eMMC installation: cd /boot sudo cp u-boot.ext u-boot.sd 3.6 Execute the eMMC installation: /root/install-aml.sh 3.7 without error: Spoiler jeedom@aml:~/Desktop$ sudo /root/install-aml.sh [sudo] password for jeedom: Start script create MBR and filesystem /dev/mmcblk2 Start backup u-boot default 4+0 records in 4+0 records out 4194304 bytes (4.2 MB, 4.0 MiB) copied, 0.38637 s, 10.9 MB/s Start create MBR and partittion Start restore u-boot 442+0 records in 442+0 records out 442 bytes copied, 0.00292171 s, 151 kB/s 8191+0 records in 8191+0 records out 4193792 bytes (4.2 MB, 4.0 MiB) copied, 0.396535 s, 10.6 MB/s Done Start copy system for eMMC. Formatting BOOT partition...mkfs.fat 4.1 (2017-01-24) done. Cppying BOOT...done. Edit init config...done. Formatting ROOT partition... /dev/mmcblk2p2 contains a ext4 file system labelled 'ROOT_EMMC' last mounted on /ddbr/install on Wed Feb 5 12:43:32 2020 e2fsck 1.44.1 (24-Mar-2018) ROOT_EMMC: clean, 11/1851392 files, 160257/7400192 blocks done. Copying ROOTFS. Copy BIN Create DEV Copy ETC Copy HOME Copy LIB Create MEDIA Create MNT Copy OPT Create PROC Copy ROOT Create RUN Copy SBIN Copy SELINUX Copy SRV Create SYS Create TMP Copy USR Copy VAR Copy fstab ******************************************* Complete copy OS to eMMC ******************************************* jeedom@aml:~/Desktop$ I have shutdown the system, remove the power supply, remove the SD Card and reconnect the power supply. But unfortunately, the system doesn't want to boot from eMMC (no bootloop as previously, the TV can detect HDMI signal but blackscreen). I'm lost !
Armin Posted May 17, 2020 Posted May 17, 2020 (edited) Seems to be the same issue here: https://forum.armbian.com/topic/7930-armbian-for-amlogic-s9xxx-kernel-5x/page/53/?tab=comments#comment-98285 I'm waiting 15min without success. I wil try otherd DTB but you have any idea to increase my chances ! Maybe, @root-stas will have solution later: https://forum.armbian.com/topic/12162-single-armbian-image-for-rk-aml-aw/page/26/?tab=comments#comment-101783 Edited May 17, 2020 by Armin
Bracco Prova Posted May 17, 2020 Posted May 17, 2020 hi everybody, first let me thank balbes150 and the armbian team for their awesome work i just got a s905x3 box, it's a tanix tx3 (not mini, not max, not pro, just tx3) i can boot it from usb (not SD, getting infinite error -84) with meson-sm1-sei610.dtb and a few g12a dtbs, however, none has wifi/bluetooth working (it's a RTL8189etv) , and probably ethernet and emmc too. i extracted my box stock android dtb.img but that doesn't help too. what can i do to create an armbian compatible dts/dtb from either coreelec's or android's? i am almost a complete noob with dts so i am not really sure where to start
SteeMan Posted May 18, 2020 Posted May 18, 2020 5 hours ago, Armin said: 3.4 I have seen 2 drives (ROOT_EMMC and BOOT_EMMC) so I imageine this is the previous installation on the eMMC ==> unmount these 2 drives My guess is that this is the cause of your problems. The contents of emmc are involved in the boot process, (that is where the uboot environment is stored and thus the multiboot script) so you really don't know what your starting point is here. I would strongly suggest that you reinstall the android firmware to get to a clean starting point. Then follow the instructions in the first post of the thread "Single Armbian image for RK + AML + AW" I also noticed that the uEnv.txt file you have posted has two FDT lines which is not correct. You should only have one uncommented FDT line in the file.
balbes150 Posted May 18, 2020 Posted May 18, 2020 13 hours ago, root-stas said: I know, but if that helping, why not? Tests, no one bothers you. 13 hours ago, root-stas said: Anyway, if you want, I'm on board Let's say I get a specific model. There will be no information from the manufacturer or access to sources for quick analysis. I'll have to dig everything out of binary code. I will spend a lot of time on the device (hardware configuration), which will change in a week\month. As a result, everyone who will focus on supporting this particular model will buy it, and get another revision with different hardware, and start asking questions and moaning that nothing works for them. Then what ? Only one producer of this shit will win, all the others (users and I) will lose, will work for the personal enrichment of a particular freak who did not spend anything (absolutely nothing) on it.
Armin Posted May 18, 2020 Posted May 18, 2020 (edited) 6 hours ago, SteeMan said: My guess is that this is the cause of your problems. The contents of emmc are involved in the boot process, (that is where the uboot environment is stored and thus the multiboot script) so you really don't know what your starting point is here. I would strongly suggest that you reinstall the android firmware to get to a clean starting point. Then follow the instructions in the first post of the thread "Single Armbian image for RK + AML + AW" I also noticed that the uEnv.txt file you have posted has two FDT lines which is not correct. You should only have one uncommented FDT line in the file. Thanks for your feedback. I will restore the Android firmware with "ddbr" utility from my initial backup but this is very long I suppose (backup time = 3H). I hesitate to use this method (this is the correct firmware of my box - X96 Air P3): https://chinagadgetsreviews.com/download-android-pie-9-0-firmware-for-x96-air-tv-box-2.html Moreover, on this post (https://forum.armbian.com/topic/12988-armbian-for-amlogic-s905x3/page/7/?tab=comments#comment-101721) I have detailled my actions and after reading the the first post of the thread "Single Armbian image for RK + AML + AW", I didn't find where I'm wrong !!! Edited May 18, 2020 by Armin
root-stas Posted May 18, 2020 Posted May 18, 2020 @Armin Hi I think your problem not in Armbian image, as @SteeMan tell and @balbes150 mansion on another thread, your bootloader in emmc broken now and you need write stock firmware on them. Try proper one, not made yourself by dd, from there: https://hd-mediaplayers.ru/firmware-tv-box-x96-air-p3/ Direct link: http://geekbuying.mediafire.com/file/m7t06iirsnqhpic/X96Air_P3_20191220-2048.img/file Use USB Barning Tool: http://uploaded.net/file/5h4z3646 If your problem already stay in dd made snapshot, they not despaired himself when you reburn same snapshot few times again. @balbes150 I understood your position about tv box vendors, last one, can you list your hardware/box model where you test your work? I found here you have Allwinner H6 one, that's correct?
root-stas Posted May 18, 2020 Posted May 18, 2020 1 hour ago, Armin said: I hesitate to use this method (this is the correct firmware of my box - X96 Air P3): https://chinagadgetsreviews.com/download-android-pie-9-0-firmware-for-x96-air-tv-box-2.html Do it
SteeMan Posted May 18, 2020 Posted May 18, 2020 2 hours ago, Armin said: Moreover, on this post (https://forum.armbian.com/topic/12988-armbian-for-amlogic-s905x3/page/7/?tab=comments#comment-101721) I have detailled my actions and after reading the the first post of the thread "Single Armbian image for RK + AML + AW", I didn't find where I'm wrong !!! You have done a lot of things wrong and not mentioned many other important steps. For example you are mixing and using pieces of old information that are unnecessary at best, or problematic at worst. For example don't use the files from NicoD, as everything you need is incorporated into the current RK + AML + AW builds. You are also mixing builds, the build you started with is from February and it is now May. The multiboot process evolves overtime and what got installed into your emmc by multiboot when you first tried may not be compatible with current builds. Most importantly the key to success is the dtb file. In your initial post you don't even mention what dtb you are trying. The general rule is that you should try every dtb file compatible with your cpu (which in the case of the s905x3 would be all g12 and sm1 dtbs) to find the one that works best. Here is my recommendation: start fresh. Start simple then build from there. By this I mean don't worry about things like the color issue at all at the beginning, as that may not even be an issue for you. Even if you have the color issue, the system is still usable. Then once you have a baseline knowledge of what works and what doesn't, then try to get the remaining items working for your needs. Be prepared to go back to a clean environment (i.e. back to fresh android firmware) multiple times in this process. I have a s905x3 based TX3X3 that I am now running happily (as a server without wifi or bt) but I have needed to restore the android firmware multiple times and started over when things just stop working for no apparent reason after I made changes to the box. Finally, set your expectations low. You should be able to get a box that boots, has ethernet, hdmi and can be used as a server. Everything else (wifi, bt, usable desktop, etc) is something that you may get with luck and a lot of hard work. Unfortunately that is the situation with armbian on these android tv boxes since the device manufacturers provide no support (in terms of source code or documentation) on their products so there is very little ability to get things working with armbian in any supportable way. (especially true with aml based boxes which is why balbes150 is no longer investing time into their support). 1
balbes150 Posted May 18, 2020 Posted May 18, 2020 1 hour ago, root-stas said: can you list your hardware/box model where you test your work? I found here you have Allwinner H6 one, that's correct? Allwinner H6 : Tanix TX6, Eachlink H6 (no mini)
Armin Posted May 18, 2020 Posted May 18, 2020 (edited) Thanks @root-stas for your great support. The SD card method didn't be successfully but this is OK with USB Burning Tool !!! So, now, I have a functional TV box with Android firmware @SteeMan I think you're right but I'm little bit lost. So, if I follow your recommendations, I need to proceed like this: 1. Select a firmware from May into link RK_AML_AW: for example Armbian_20.05.4_Arm-64_bionic_current_5.7.0-rc5_desktop_20200516.img 2. Burn it on the SD Card with Etcher. 3. Edit uEnv.txt to select only one DTB file (g12 or sm1) into Amlogic section (the other DTB files into the other sections needs to be place in comments with # ?) 4. Rename u-boot.sd to u-boot.ext 5. Try to boot wtih the SD card on the box If this is OK, next step will be to install it on the eMMC. PS: For the moment, I do not need WiFi, BT, HDMI sound, perfect color and desktop. I want also the create a linux server with ethernet connection. Edited May 18, 2020 by Armin
root-stas Posted May 18, 2020 Posted May 18, 2020 1 hour ago, balbes150 said: Allwinner H6 : Tanix TX6, Eachlink H6 (no mini) Thanks, no one on AmLogic SoC? @Armin don't rename u-boot - copy them with new name. On different DTB ethernet has 100M or completely don't working. If you need only server ability why do you use desktop img version?
balbes150 Posted May 18, 2020 Posted May 18, 2020 9 minutes ago, root-stas said: Thanks, no one on AmLogic SoC? Several dozen different models from s805 to s922\a311d. (I will not list all the options)
Armin Posted May 18, 2020 Posted May 18, 2020 (edited) @root-stas yes, Desktop version is not mandatory but I'm a newbie related to Armbian and also Linux. So, to start, Desktop version is better. But after reflexion, I just need to configure onlyone parameter (force the Ethernet to 100M) And command line seems to be: sudo ethtool –s [device_name] speed 100 duplex full autoneg on Edited May 18, 2020 by Armin
Teddybee Posted May 18, 2020 Posted May 18, 2020 @root-stas Thank you for your guide. Unfortunately I still don't have working wired network on my x99 pro plus / x88 pro x3 / Transpeed X3 Plus. (these are the same, some said) I have tries some meson-sm1-sei610-ethfix.dtb -s, I have seen the ethernet device, but it simply doesn't ping. DHCP is not working, I changed the network adapter's setttings to autonegotiation off, 100mbit, static ips, nothing helped. My dts file's netwotk part from android is so different than the ethfix dtb/dts's. I am thinking about using the Ubuntu 20 with 4.xx kernel. Would that work with my extracted android dtb? This is my ethernet parts from the dts: Quote ethernet@ff3f0000 { compatible = "amlogic, g12a-eth-dwmac\0snps,dwmac"; reg = <0xff3f0000 0x10000 0xff634540 0x08 0xff64c000 0xa0 0xffd01008 0x04>; reg-names = "eth_base\0eth_cfg\0eth_pll\0eth_reset"; interrupts = <0x00 0x08 0x01>; interrupt-names = "macirq"; status = "okay"; clocks = <0x02 0x38>; clock-names = "ethclk81"; pll_val = <0x9c0040a 0x927e0000 0xac5f49e5>; analog_val = <0x20200000 0xc000 0x23>; pinctrl-names = "external_eth_pins"; pinctrl-0 = <0x11>; mc_val = <0x1621>; internal_phy = <0x00>; phandle = <0x9d>; }; external_eth_pins { phandle = <0x11>; mux { groups = "eth_mdio\0eth_mdc\0eth_rgmii_rx_clk\0eth_rx_dv\0eth_rxd0\0eth_rxd1\0eth_rxd2_rgmii\0eth_rxd3_rgmii\0eth_rgmii_tx_clk\0eth_txen\0eth_txd0\0eth_txd1\0eth_txd2_rgmii\0eth_txd3_rgmii"; function = "eth"; drive-strength = <0x03>; }; };
root-stas Posted May 18, 2020 Posted May 18, 2020 (edited) 38 minutes ago, Teddybee said: reg = <0xff3f0000 0x10000 0xff634540 0x08 0xff64c000 0xa0 0xffd01008 0x04>; reg-names = "eth_base\0eth_cfg\0eth_pll\0eth_reset"; That is problem. our box connected little bit different way ))) ethernet@ff3f0000 { compatible = "amlogic, g12a-eth-dwmac\0snps,dwmac"; reg = <0xff3f0000 0x10000 0xff634540 0x08 0xff64c000 0xa0>; <-!!!!!!!!!! reg-names = "eth_base\0eth_cfg\0eth_pll"; <-!!!!!!!!!! interrupts = <0x00 0x08 0x01>; interrupt-names = "macirq"; status = "okay"; clocks = <0x02 0x38>; clock-names = "ethclk81"; pll_val = <0x9c0040a 0x927e0000 0xac5f49e5>; analog_val = <0x20200000 0xc000 0x23>; pinctrl-names = "external_eth_pins"; pinctrl-0 = <0x11>; rst_pin-gpios = <0x12 0x10 0x00>; <-!!!!!!!!!! mc_val = <0x1621>; mc_val_internal_phy = <0x1800>; mc_val_external_phy = <0x1621>; internal_phy = <0x00>; phandle = <0x94>; }; Try another one DTB, from g12a tree too, if you found where ethernet is working - copy that part from there Write your dmesg here. Edited May 18, 2020 by root-stas
SteeMan Posted May 18, 2020 Posted May 18, 2020 4 hours ago, Armin said: 1. Select a firmware from May into link RK_AML_AW: for example Armbian_20.05.4_Arm-64_bionic_current_5.7.0-rc5_desktop_20200516.img 2. Burn it on the SD Card with Etcher. 3. Edit uEnv.txt to select only one DTB file (g12 or sm1) into Amlogic section (the other DTB files into the other sections needs to be place in comments with # ?) 4. Rename u-boot.sd to u-boot.ext 5. Try to boot wtih the SD card on the box If this is OK, next step will be to install it on the eMMC. 1. Select a firmware from May into link RK_AML_AW: for example Armbian_20.05.4_Arm-64_bionic_current_5.7.0-rc5_desktop_20200516.img >> Yes 2. Burn it on the SD Card with Etcher. >> Yes 3. Edit uEnv.txt to select only one DTB file (g12 or sm1) into Amlogic section (the other DTB files into the other sections needs to be place in comments with # ?) >> Yes comment out all APPEND and FTD lines except the one for the DTB you are testing, and the AML boot line. 4. Rename u-boot.sd to u-boot.ext >> Do not do this at this stage, keep it simple and see if you even need this. 5. Try to boot wtih the SD card on the box >> When you boot you need to enable multiboot (either through the "toothpick" method or the android update method. If this is OK, next step will be to install it on the eMMC. >> Then you should be testing all the features you want/need, perhaps trying with different DTBs to see if others work better or worse, then test with the color fix (cp u-boot.sd to u-boot.ext if you need). >> Only when you are happy with how everything runs, would I try to install to emmc. >> The idea is to do the setup step by step testing along the way so you know when things in this multistep process are not working for your box.
Armin Posted May 19, 2020 Posted May 19, 2020 Thanks @SteeMan and @root-stas for your great support (without forgotten @balbes150 for his great job on Armbian) Today's news: 1. I have burnt the version Armbian_20.05.4_Arm-64_bionic_current_5.7.0-rc6_20200518.img on the SD card with Etcher 2. Copy u-boot.sd to u-boot.ext (impossible to boot on the SD card without this) 3. Modify uEnv.txt to choose meson-g12a-x96-max-no-cvbs DTB file in amlogic section: Spoiler LINUX=/zImage INITRD=/uInitrd # rk-3399 #FDT=/dtb/rockchip/rk3399-rock-pi-4.dtb #FDT=/dtb/rockchip/rk3399-nanopc-t4.dtb #APPEND=root=LABEL=ROOTFS rootflags=data=writeback rw console=uart8250,mmio32,0xff1a0000 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 # rk-3328 #FDT=/dtb/rockchip/rk3328-box-trn9.dtb #FDT=/dtb/rockchip/rk3328-box.dtb #APPEND=root=LABEL=ROOTFS rootflags=data=writeback rw console=uart8250,mmio32,0xff130000 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 # aw h6 #FDT=/dtb/allwinner/sun50i-h6-tanix-tx6.dtb #APPEND=root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyS0,115200 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 #APPEND=root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyS0,115200 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 mem=2048M video=HDMI-A-1:e # aml s9xxx FDT=/dtb/amlogic/meson-g12a-x96-max-no-cvbs.dtb #FDT=/dtb/amlogic/meson-g12b-ugoos-am6-no-cvbs.dtb #FDT=/dtb/amlogic/meson-g12b-odroid-n2.dtb APPEND=root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 4. Boot on the SD card (with toothpick method because impossible with android update method due to error like this) 5. Define root password and create user session 6. Force the Ethernet speed to 100Mb sudo ethtool –s [device_name] speed 100 duplex full autoneg on 7. Now, I can use putty from another device to be connected on the TV Box !!!! Next step is to copy this configuration on the eMMC. So, I'm waiting your instructions to be sure that I can use this method: cd /boot sudo cp u-boot.ext u-boot.sd cd sudo /root/install-aml.sh 1
SteeMan Posted May 19, 2020 Posted May 19, 2020 6 minutes ago, Armin said: cd /boot sudo cp u-boot.ext u-boot.sd cd sudo /root/install-aml.sh You should not need to do anything with the u-boot file at this point as the u-boot.sd file should already exist (as long as you copied instead of moved the file earlier) All you should need to do is: sudo /root/install-aml.sh Although what I do is become root and run from the root directory: sudo su root cd root ./install-aml.sh
balbes150 Posted May 19, 2020 Posted May 19, 2020 14 minutes ago, SteeMan said: Although what I do is become root and run from the root directory: sudo su root cd root ./install-aml.sh There is an easier option su - ./install-aml.sh or and visually (using the cursor arrows and the Enter key) select the desired file and execute it su - mc ......
Recommended Posts