Jump to content
  • 0

nanopi neo3 not booting after update


Dennboy
 Share

Question

Dear maintainers,

 

Guess some device tree issues with neo3 got me into this mess, since rk3328-nanopi-neo3-rev02.dtb is missnig.

 

Scanning mmc 1:1...                                         
Found U-Boot script /boot/boot.scr                          
3185 bytes read in 7 ms (444.3 KiB/s)
## Executing script at 00500000
Boot script loaded from mmc 1
428 bytes read in 6 ms (69.3 KiB/s)                                                                                               
12514638 bytes read in 556 ms (21.5 MiB/s)                                                                                        
30083584 bytes read in 1326 ms (21.6 MiB/s)                                                                                       
Failed to load '/boot/dtb/rockchip/rk3328-nanopi-neo3-rev02.dtb'                                                                  
libfdt fdt_check_header(): FDT_ERR_BADMAGIC                                                                                       
No FDT memory address configured. Please configure                                                                                
the FDT address via "fdt addr <address>" command.                                                                                 
Aborting!                                        

 

Kind regards,
Dennis

Link to comment
Share on other sites

4 answers to this question

Recommended Posts

  • 0

As a work-around, I managed to reuse dtb-5.10.63-rockchip64/rockchip/rk3328-nanopi-neo3-rev02.dtb from Armbian-21.08 so that I could boot the image again.

Just learned that the board is no longer supported, that's probably why the devicetree file got removed.

Link to comment
Share on other sites

Armbian is a community driven open source project. Do you like to contribute your code?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...