olivier-b Posted September 29, 2016 Share Posted September 29, 2016 (edited) Hi, I'm Olivier, french engineer, and i have bought an orangepi plus card in april. I use linux (x86) since 1994 Sorry for my bad english ... I was happy to find Armbian because linux images provided by xunlong have many security problems (example / and all system directory aren't owned by root but by orangepi user). Thank for your work on Armbian. My Orangepi + has been installed with a 5.10 armbian image (Armbian_5.10_Orangepiplus_Debian_jessie_3.4.112) and run perfectly. I wanted upgrade to 5.20 and since the card doesn't boot anymore. I can boot with the native android on NAND memory but I can't boot on SDcard. When I boot on sdcard, only green led is on (not red led) and I don't have any display on my HDMI screen. I can restore my sdcard image back up with v5.10 and boot again, the card is OK for me. I followed the upgrade documentation to pass from v5.10 to v5.20 : apt-get update apt-get upgrade apt-get install -f apt-get upgrade apt-get autoremove -y and i had an error message during first apt-get upgrade : /boot/initrd.img-3.4.112-sun8i does not exist. Cannot update. I can mount the sdcard on my linux box (an archlinux) and list directories without problem : [olivier@pcolivier boot]$ ls -lrt total 13236 -rw-r--r-- 1 root root 6944 30 avril 23:28 boot.bmp lrwxrwxrwx 1 root root 20 30 avril 23:28 script.bin -> bin/orangepiplus.bin -rw-r--r-- 1 root root 2372 30 avril 23:28 boot.cmd -rw-r--r-- 1 root root 2444 30 avril 23:28 boot.scr drwxr-xr-x 2 root root 4096 30 avril 23:28 bin.old -rwxr-xr-x 1 root root 5025168 14 sept. 20:29 vmlinuz-3.4.112-sun8i -rw-r--r-- 1 root root 2119429 14 sept. 20:29 System.map-3.4.112-sun8i -rw-r--r-- 1 root root 94749 14 sept. 20:29 config-3.4.112-sun8i drwxr-xr-x 2 root root 4096 29 sept. 22:20 bin lrwxrwxrwx 1 root root 21 29 sept. 22:21 zImage -> vmlinuz-3.4.112-sun8i -rw-r--r-- 1 root root 3139657 29 sept. 22:21 initrd.img-3.4.112-sun8i -rw-r--r-- 1 root root 3139721 29 sept. 22:21 uInitrd [olivier@pcolivier boot]$ pwd /run/media/olivier/62049b2c-66a0-468e-a7f7-7d30e350f08e/boot on my sdcard image backup (v5.10), in /boot I have : olivier@pcolivier boot]$ ls -lrt total 10240 -rwxr-xr-x 1 root root 5116680 30 avril 19:49 vmlinuz-3.4.112-sun8i -rw-r--r-- 1 root root 2126271 30 avril 19:49 System.map-3.4.112-sun8i -rw-r--r-- 1 root root 94856 30 avril 19:49 config-3.4.112-sun8i lrwxrwxrwx 1 root root 21 30 avril 23:27 zImage -> vmlinuz-3.4.112-sun8i -rw-r--r-- 1 root root 3115791 30 avril 23:27 uInitrd -rw-r--r-- 1 root root 6944 30 avril 23:28 boot.bmp lrwxrwxrwx 1 root root 20 30 avril 23:28 script.bin -> bin/orangepiplus.bin -rw-r--r-- 1 root root 2372 30 avril 23:28 boot.cmd -rw-r--r-- 1 root root 2444 30 avril 23:28 boot.scr drwxr-xr-x 2 root root 4096 30 avril 23:28 bin Any idea ? here is the all message of upgrade process : ___ ____ _ / _ \ _ __ __ _ _ __ __ _ ___ | _ \(_) _ | | | | '__/ _` | '_ \ / _` |/ _ \ | |_) | |_| |_ | |_| | | | (_| | | | | (_| | __/ | __/| |_ _| \___/|_| \__,_|_| |_|\__, |\___| |_| |_| |_| |___/ Welcome to ARMBIAN Debian GNU/Linux 8 (jessie) 3.4.112-sun8i System load: 0.53 Up time: 44 sec Memory usage: 5 % of 1000Mb IP: 192.168.2.10 CPU temp: 37°C Usage of /: 25% of 7.4G [ 5 updates to install: apt-get upgrade ] Last login: Thu Sep 29 21:59:20 2016 from pcolivier.lan root@orangepiplus:~# apt-get update Get:1 http://security.debian.orgjessie/updates InRelease [63.1 kB] Hit http://apt.armbian.comjessie InRelease Ign http://httpredir.debian.orgjessie InRelease Get:2 http://httpredir.debian.orgjessie-updates InRelease [142 kB] Hit http://apt.armbian.comjessie/main armhf Packages Get:3 http://security.debian.orgjessie/updates/main Sources [162 kB] Hit http://httpredir.debian.orgjessie Release.gpg Hit http://httpredir.debian.orgjessie Release Get:4 http://httpredir.debian.orgjessie-updates/main Sources [15.5 kB] Ign http://apt.armbian.comjessie/main Translation-en Get:5 http://httpredir.debian.orgjessie-updates/contrib Sources [32 B] Get:6 http://httpredir.debian.orgjessie-updates/non-free Sources [920 B] Get:7 http://httpredir.debian.orgjessie-updates/contrib armhf Packages [32 B] Get:8 http://httpredir.debian.orgjessie-updates/main armhf Packages/DiffIndex [5,440 B] Get:9 http://security.debian.orgjessie/updates/contrib Sources [1,439 B] Get:10 http://httpredir.debian.orgjessie-updates/non-free armhf Packages/DiffIndex [736 B] Get:11 http://security.debian.orgjessie/updates/non-free Sources [14 B] Get:12 http://httpredir.debian.orgjessie-updates/contrib Translation-en [14 B] Get:13 http://security.debian.orgjessie/updates/main armhf Packages [295 kB] Get:14 http://httpredir.debian.orgjessie-updates/main Translation-en/DiffIndex [2,704 B] Get:15 http://httpredir.debian.orgjessie-updates/non-free Translation-en/DiffIndex [736 B] Hit http://httpredir.debian.orgjessie/main Sources Hit http://httpredir.debian.orgjessie/contrib Sources Hit http://httpredir.debian.orgjessie/non-free Sources Hit http://httpredir.debian.orgjessie/main armhf Packages Hit http://httpredir.debian.orgjessie/contrib armhf Packages Hit http://httpredir.debian.orgjessie/non-free armhf Packages Get:16 http://security.debian.orgjessie/updates/contrib armhf Packages [1,138 B] Get:17 http://security.debian.orgjessie/updates/non-free armhf Packages [14 B] Get:18 http://security.debian.orgjessie/updates/contrib Translation-en [1,211 B] Hit http://httpredir.debian.orgjessie/contrib Translation-en Get:19 http://security.debian.orgjessie/updates/main Translation-en [163 kB] Hit http://httpredir.debian.orgjessie/main Translation-en Hit http://httpredir.debian.orgjessie/non-free Translation-en Get:20 http://security.debian.orgjessie/updates/non-free Translation-en [14 B] Fetched 855 kB in 27s (30.7 kB/s) Reading package lists... Done root@orangepiplus:~# apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... The following package was automatically installed and is no longer required: libnl-route-3-200 Use 'apt-get autoremove' to remove it. Done The following packages will be upgraded: linux-firmware-image-sun8i linux-headers-sun8i linux-image-sun8i linux-jessie-root-orangepiplus linux-u-boot-orangepiplus-default 5 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/18.6 MB of archives. After this operation, 1,051 kB disk space will be freed. Do you want to continue? [Y/n] (Reading database ... 59967 files and directories currently installed.) Preparing to unpack .../linux-firmware-image-sun8i_5.20_armhf.deb ... Unpacking linux-firmware-image-sun8i (5.20) over (5.10) ... Preparing to unpack .../linux-headers-sun8i_5.20_armhf.deb ... Unpacking linux-headers-sun8i (5.20) over (5.10) ... Preparing to unpack .../linux-image-sun8i_5.20_armhf.deb ... Unpacking linux-image-sun8i (5.20) over (5.10) ... Preparing to unpack .../linux-jessie-root-orangepiplus_5.20_armhf.deb ... Unpacking linux-jessie-root-orangepiplus (5.20) over (5.10) ... Preparing to unpack .../linux-u-boot-orangepiplus-default_5.20_armhf.deb ... Unpacking linux-u-boot-orangepiplus-default (5.20) over (5.10) ... Processing triggers for initramfs-tools (0.120+deb8u2) ... /boot/initrd.img-3.4.112-sun8i does not exist. Cannot update. Processing triggers for systemd (215-17+deb8u5) ... Setting up linux-firmware-image-sun8i (5.20) ... Setting up linux-headers-sun8i (5.20) ... Compiling headers - please wait ... Setting up linux-image-sun8i (5.20) ... update-initramfs: Generating /boot/initrd.img-3.4.112-sun8i Setting up linux-jessie-root-orangepiplus (5.20) ... Setting up linux-u-boot-orangepiplus-default (5.20) ... Processing triggers for initramfs-tools (0.120+deb8u2) ... update-initramfs: Generating /boot/initrd.img-3.4.112-sun8i root@orangepiplus:~# apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done The following package was automatically installed and is no longer required: libnl-route-3-200 Use 'apt-get autoremove' to remove it. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. root@orangepiplus:~# apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... The following package was automatically installed and is no longer required: libnl-route-3-200 Use 'apt-get autoremove' to remove it. Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. root@orangepiplus:~# apt-get autoremove -y Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: libnl-route-3-200 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded. After this operation, 283 kB disk space will be freed. (Reading database ... 60164 files and directories currently installed.) Removing libnl-route-3-200:armhf (3.2.24-2) ... Processing triggers for libc-bin (2.19-18+deb8u6) ... root@orangepiplus:~# reboot Edited October 3, 2016 by olivier-b tags spoiler ajoutés 1 Link to comment Share on other sites More sharing options...
wildcat_paris Posted September 30, 2016 Share Posted September 30, 2016 the gap between 5.10 & 5.20 is huge (Armbian tool especially). Maybe it is better if you backup your data & start from a fresh install and/or attend un conseil plus avisé que le mien Link to comment Share on other sites More sharing options...
Igor Posted September 30, 2016 Share Posted September 30, 2016 Hmm, everything looks o.k. too me. Serial console log would tell us what's wrong. Can you get one? Link to comment Share on other sites More sharing options...
olivier-b Posted September 30, 2016 Author Share Posted September 30, 2016 Thank you for your answersGoldfish_paris : Thank you for the advice, if I can't find the solution I will try it. Before I'd like to understand why upgrade doesn't work.Igor :I don't try serial console. I just received, from mail, a USB-TTL module (an xcsource usb to ttl ch340g 3.3v and 5v) to connect my esp8266 modules (I have Arduino UNO too if needed).I will test this week-end to connect it to my orangepi+To connect it, I guess I have to use minicom. These documents are they OK ?TTL speed and serial parameter ? --> http://www.orangepi.org/Docs/LogintotheOrangePi.html#Using_TTL_serial_portUART location on orangepi+ ? --> http://linux-sunxi.org/File:Xunlong_Orange_Pi_Plus_uart.jpgUART documentation ? --> http://linux-sunxi.org/UART Link to comment Share on other sites More sharing options...
Igor Posted September 30, 2016 Share Posted September 30, 2016 To connect it, I guess I have to use minicom. These documents are they OK ? TTL speed and serial parameter ? --> http://www.orangepi....TTL_serial_portUART location on orangepi+ ? --> http://linux-sunxi.o...i_Plus_uart.jpg UART documentation ? --> http://linux-sunxi.org/UART Yes, they are fine. Link to comment Share on other sites More sharing options...
olivier-b Posted September 30, 2016 Author Share Posted September 30, 2016 Here is the console messages when I boot with the sdcard v5.20 : U-Boot SPL 2016.09-armbian (Sep 15 2016 - 07:58:09) DRAM: 1024 MiB Trying to boot from MMC1 MMC: no card present spl: mmc init failed with error: -123 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### I restored my backup image (v5.10), here is the serial console messages : U-Boot SPL 2016.03-armbian-sun8i (Apr 30 2016 - 23:26:36) DRAM: 1024 MiB Trying to boot from MMC U-Boot 2016.03-armbian-sun8i (Apr 30 2016 - 23:26:36 +0200) Allwinner Technology CPU: Allwinner H3 (SUN8I) I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 (SD), SUNXI SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. starting USB... USB0: USB EHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning bus 1 for devices... 1 USB Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 2444 bytes read in 206 ms (10.7 KiB/s) ## Executing script at 43100000 gpio: pin PL10 (gpio 298) value is 1 gpio: pin PG11 (gpio 203) value is 1 ** File not found /boot/.verbose ** ** File not found /boot/.next ** ** Unrecognized filesystem type ** ** File not found .next ** 37052 bytes read in 614 ms (58.6 KiB/s) 3115791 bytes read in 3292 ms (923.8 KiB/s) 5116680 bytes read in 5349 ms (933.6 KiB/s) Kernel image @ 0x48000000 [ 0x000000 - 0x4e1308 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 3115727 Bytes = 3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Using machid 0x1029 from environment Starting kernel ... [sun8i_fixup]: From boot, get meminfo: Start: 0x40000000 Size: 1024MB ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1 ion_reserve_select: ion chipid [0x2004620! ion_reserve_common: ion reserve: [0x50000000, 0x60000000]! Link to comment Share on other sites More sharing options...
jernej Posted September 30, 2016 Share Posted September 30, 2016 Which sd card do you use? Speed class and capacity? In recent U-Boot there was some changes regarding communication timings with MMC. Link to comment Share on other sites More sharing options...
olivier-b Posted September 30, 2016 Author Share Posted September 30, 2016 I use the card sold by xunlong (8GB classe 10 Micro SD HC I without brand red and grey) Link to comment Share on other sites More sharing options...
wildcat_paris Posted September 30, 2016 Share Posted September 30, 2016 @olivier-b if you restored the SDcard and the kernel boots, your card should be fine (at least, some hopes, because you may have a bad sector being remapped on your SDcard). so, the blob & uboot is not properly written on the SDcard by the upgrade .deb file, so the boot process is broken. 1/ Plan A I would download the deb files, only install the kernel related files (nothing related to uboot/blobs/etc) OR more simple, install aptitude and select the package you want to upgrade (related to the kernel, not uboot -- so the boot process is not broken) 2/ Plan B so I would download a brand new image, so we can test your SDcard http://www.armbian.com/orange-pi-plus/ then, (I could) compile your kernel/boot , provide you the all the .deb file & so we can check if it breaking a fresh install Link to comment Share on other sites More sharing options...
olivier-b Posted October 1, 2016 Author Share Posted October 1, 2016 I put the Armbian_5.20_Orangepiplus_Debian_jessie_3.4.112.img image on the card and I have the same problem U-Boot SPL 2016.09-armbian (Sep 15 2016 - 07:58:09) DRAM: 1024 MiB Trying to boot from MMC1 MMC: no card present spl: mmc init failed with error: -123 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### I remember that in April after installing version 5.10, I had already done an apt-get upgrade (5.16 I think) and I couldn't boot either. A this time, I had to put back to V5.10 img without any upgrade possible. I thought that was version that was bugged. I remember too that after, none of the official xunlong image, wouldn't boot on my card (except the android on MMC memory). Link to comment Share on other sites More sharing options...
olivier-b Posted October 2, 2016 Author Share Posted October 2, 2016 to test, I will buy a 10 class and u1 sdcard. Link to comment Share on other sites More sharing options...
olivier-b Posted October 3, 2016 Author Share Posted October 3, 2016 Same problem with a NEW Samsung EVO microSDHC UHS-I (48MB/s) and Armbian_5.20_Orangepiplus_Debian_jessie_3.4.112.img image : U-Boot SPL 2016.09-armbian (Sep 15 2016 - 07:58:09) DRAM: 1024 MiB Trying to boot from MMC1 MMC: no card present spl: mmc init failed with error: -123 SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### 1 Link to comment Share on other sites More sharing options...
Igor Posted October 3, 2016 Share Posted October 3, 2016 OK, I guess there is an issue with MMC init in latest u-boot. Thank you for reporting. In the mean time you can hack perhaps this way: start with v5.10, remove package linux-u-boot-orangepipcplus and then issue and upgrade to 5.2 Link to comment Share on other sites More sharing options...
olivier-b Posted October 3, 2016 Author Share Posted October 3, 2016 If that can help, I found the same error message ( spl: mmc init failed with error: -123 ) in the attached file (log1.txt) in this thread : http://forum.armbian.com/index.php/topic/1945-orange-pi-plus-2e/?p=15020 I remove linux-u-boot-orangepiplus-default package and upgrade. Now I can boot : U-Boot SPL 2016.03-armbian-sun8i (Apr 30 2016 - 23:26:36) DRAM: 1024 MiB Trying to boot from MMC U-Boot 2016.03-armbian-sun8i (Apr 30 2016 - 23:26:36 +0200) Allwinner Technology CPU: Allwinner H3 (SUN8I) I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 (SD), SUNXI SD/MMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. starting USB... USB0: USB EHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning bus 1 for devices... 1 USB Device(s) found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 2444 bytes read in 293 ms (7.8 KiB/s) ## Executing script at 43100000 gpio: pin PL10 (gpio 298) value is 1 gpio: pin PG11 (gpio 203) value is 1 ** File not found /boot/.verbose ** ** File not found /boot/.next ** ** Unrecognized filesystem type ** ** File not found .next ** 37328 bytes read in 529 ms (68.4 KiB/s) 3139724 bytes read in 14661 ms (209 KiB/s) 5025168 bytes read in 23461 ms (209 KiB/s) Kernel image @ 0x48000000 [ 0x000000 - 0x4cad90 ] ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 3139660 Bytes = 3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Using machid 0x1029 from environment Starting kernel ... [sun8i_fixup]: From boot, get meminfo: Start: 0x40000000 Size: 1024MB ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1 ion_reserve_select: ion chipid [0x2004620! ion_reserve_common: ion reserve: [0x50000000, 0x60000000]! Thank you very much Now I have two sdcard so if you want help to test new image, no problem, feel free to ask me 2 Link to comment Share on other sites More sharing options...
Recommended Posts