Can't compile Image for espressoBin

[StarSurfer]

Hi folks, 
I've been trying to compile an image for the EspressoBin since yesterday. 
Unfortunately I get the following error every time I run it.
Other boards work fine.

Armbian-unofficial_25.05.0-trunk_Khadas-vim2_bookworm_edge_6.13.7.img Armbian-unofficial_25.05.0-trunk_Rockpro64_bookworm_edge_6.14.0-rc4.img

Why is this only with the EspressoBin can someone help me ?

Kind regards
StarSurfer

 

Spoiler

[💲|🔨]         trusted-secure-firmware.bin trusted-secure-firmware-uart.bin trusted-secure-firmware-emmc.bin \
[💲|🔨]         untrusted-secure-firmware.bin untrusted-secure-firmware-emmc.bin
[💲|🔨]   make -C wtmi CROSS_CM3=/usr/bin/arm-linux-gnueabi- LTO=1 wtmi_app.bin
[💲|🔨]   make[1]: Entering directory '/home/starsurfer/build/cache/sources/mox-boot/wtmi'
[💲|🔨]     CC       avs.c
[💲|🔨]     CC       board.c
[💲|🔨]     CC       clock.c
[💲|🔨]     CC       crc32.c
[💲|🔨]     CC       crypto.c
[💲|🔨]     CC       crypto_hash.c
[💲|🔨]     CC       ddr.c
[💲|🔨]     CC       ebg.c
[💲|🔨]     CC       efuse.c
[💲|🔨]     CC       gpio.c
[💲|🔨]     CC       irq.c
[💲|🔨]     CC       mbox.c
[💲|🔨]     CC       mdio.c
[💲|🔨]     HOSTCC   bin2c.c
[💲|🔨]   make[2]: Entering directory '/home/starsurfer/build/cache/sources/mox-boot/wtmi/reload_helper'
[💲|🔨]     CC       reload.c
[💲|🔨]     LD       reload_helper.elf
[💲|🔨]     OBJCOPY  reload_helper.bin
[💲|🔨]     BIN2C    reload_helper.c
[💲|🔨]   make[2]: Leaving directory '/home/starsurfer/build/cache/sources/mox-boot/wtmi/reload_helper'
[💲|🔨]     CC       reload.c
[💲|🔨]   make[2]: Entering directory '/home/starsurfer/build/cache/sources/mox-boot/wtmi/a53_helper'
[💲|🔨]     CC       main.c
[💲|🔨]   make[2]: aarch64-unknown-linux-gnu-gcc: No such file or directory
[💲|🔨]   make[2]: *** [Makefile:48: main.o] Error 127
[💲|🔨]   make[2]: Leaving directory '/home/starsurfer/build/cache/sources/mox-boot/wtmi/a53_helper'
[💲|🔨]   make[1]: *** [Makefile:152: a53_helper/a53_helper.c] Error 2
[💲|🔨]   make[1]: Leaving directory '/home/starsurfer/build/cache/sources/mox-boot/wtmi'
[💲|🔨]   make: *** [Makefile:52: wtmi/wtmi_app.bin] Error 2
[💲|💥] Cleaning up [ please wait for cleanups to finish ]
[💲|🌿] ANSI log file built; inspect it by running: [ less -RS output/logs/log-build-ccd84804-e65c-4906-8c70-09db07187085.log.ans ]
[💲|🌱] Share log manually: [ use one of the commands below (or add SHARE_LOG=yes next time!) ]
[💲|🌿] Share log manually: [ curl --data-binary @output/logs/log-build-ccd84804-e65c-4906-8c70-09db07187085.log.ans https://paste.armbian.com/log ]
[💲|🌿] Share log manually: [ curl --data-binary @output/logs/log-build-ccd84804-e65c-4906-8c70-09db07187085.log.ans https://paste.armbian.de/log ]
[💲|🌿] Share log manually: [ curl --data-binary @output/logs/log-build-ccd84804-e65c-4906-8c70-09db07187085.log.ans https://paste.next.armbian.com/log ]
[💲|🌿] Share log manually: [ curl --data-binary @output/logs/log-build-ccd84804-e65c-4906-8c70-09db07187085.log.ans https://paste.armbian.eu/log ]

 

Edited March 17 by StarSurfer

[Werner]

excerpts are useless. Provide full logs with the curl command suggested.

[bschnei]

Quote

aarch64-unknown-linux-gnu-gcc: No such file or directory

 

Suggests you don't have the 64-bit ARM cross compiler installed or the location of its executable is not on PATH.

[Igor]

On 3/17/2025 at 9:31 AM, StarSurfer said:

I've been trying to compile an image for the EspressoBin since yesterday. 

We had to gave up with maintaining this hardware so there is absolutely no warranty that it builds and boots. To verify if your build environment is operational, try to build some supported targets by using a switch ARTIFACT_IGNORE_CACHE=yes This will force recompilation and will tell you if everything is alright. Try with Raspberry Pi or any other supported target to see if things are right at your side.