c.man Posted May 24, 2020 Posted May 24, 2020 Armbianmonitor: http://ix.io/2nf4 Hi, I have a orange pi zero with NAS expansion (128 MB msata drive) I would like to boot only msata.... So, How I to do ?
c.man Posted May 24, 2020 Author Posted May 24, 2020 ok. After to use armbian-config I must to install armbian o.s. to msata with Balena Etcher o similar software .... but so I will delete all.... Or I must first install armbian o.s. to msata and after to use armbian-config....?
Igor Posted May 24, 2020 Posted May 24, 2020 You can't boot mSATA directly. You need a boot loader on SD card or SPI flash.
guidol Posted May 25, 2020 Posted May 25, 2020 32 minutes ago, c.man said: Have you any guide or tutorial ? for SPI-boot check these 2 threads in the forum (you need to adapt the "old" files : OrangePi Zero SPI / mtd0: But I dont know if the msata on the NAS-expansion is connected via USB, because I only got the NAS-Expansion at my Orange Pi R1, but no msata-drive [EDIT] seems to be connected via USB:https://www.cnx-software.com/2017/01/19/orange-pi-zero-nas-expansion-board-with-sata-usb-and-av-port-sells-for-10-shipped/ Quote Storage – 1x SATA port, 1x mSATA port both through a JMS578 USB 3.1 to SATA bridge with UAS support each, which should be better than some other USB to SATA solution despite only being connected to a USB 2.0 interface.
Recommended Posts