busterrr3x Posted September 7, 2020 Posted September 7, 2020 (edited) I started debian buster up and it started running through the black screen with non-graphics (doing this, doing that), then it got to ARMBIAN DEBIAN TTY1: login ... password. Is there a default login and password for this? If not, then there is something wrong with my download though I checked to make sure it was debian for orangepiplus2e desktop, and it is. This iso worked in the past and i have it saved on my ext hdd. UPDATE: I checked the checksum that I created with the checksum document that downloaded with the .img, and they are the same. I used "cp filename.img /dev/sdx" to copy the img to an microsd using a media card reader and it seemed to work fine. But upon loading, the file gets stuck slightly after it says "FAILED: NO NETWORK..." " failed to start network manager wait online". The "raw disk image" before copying to micro-sd is 2.3GB. 265be364d0a32e32251a90800a82837d578dbe48d19bf6968316422ca7f17214 *Armbian_5.93_Orangepiplus2e_Debian_buster_next_4.19.64_desktop.img Thanks. Edited September 24, 2020 by busterrr3x solved
Igor Posted September 7, 2020 Posted September 7, 2020 27 minutes ago, busterrr3x said: Is there a default login and password for this? Latest images have root auto login where it asks for: - changing root password - asks if you want to make autodetected locales or provide selection if more then one exists - asks for creating username (optional) - password - name (optional) Something like this (not exactly this way): Once you finish this, desktop will start - if you have a desktop images.
guidol Posted September 8, 2020 Posted September 8, 2020 13 hours ago, busterrr3x said: I started debian buster up and it started running through the black screen with non-graphics (doing this, doing that), then it got to ARMBIAN DEBIAN TTY1: login ... password. Is there a default login and password for this? Default User/Password for a new flashed image on SDCard is User: root Initial Password: 1234 after that you have to enter a new root-password 1
busterrr3x Posted September 23, 2020 Author Posted September 23, 2020 On 9/8/2020 at 10:31 AM, guidol said: Default User/Password for a new flashed image on SDCard is User: root Initial Password: 1234 after that you have to enter a new root-password Thank you Guidol - that's exactly right. Thanks Igor for your input.
Mpoint Posted April 21, 2021 Posted April 21, 2021 On 9/7/2020 at 5:40 PM, Igor said: Latest images have root auto login where it asks for: - changing root password - asks if you want to make autodetected locales or provide selection if more then one exists - asks for creating username (optional) - password - name (optional) Something like this (not exactly this way): Once you finish this, desktop will start - if you have a desktop images. Thanks I booted by Debian on Pine64 and it did Auto-login automatically However it does not ask for creation of password. But for root password and 1234 is not consider a default valid password. Is there a way to interrupt auto-login feature during boot so you can enter the command line prompt
Igor Posted April 21, 2021 Posted April 21, 2021 2 hours ago, Mpoint said: Thanks I booted by Debian on Pine64 Make sure to check https://docs.armbian.com/User-Guide_Getting-Started/ If you are using random Debian from internet, login could be different. If you are using official Armbian and you have such problems, your SD card could be failing https://forum.armbian.com/forum/31-sd-card-and-psu-issues/
Recommended Posts