Odroid-C2 does not start (no boot) after "reboot" command (RE-OPEN), start without login

[jumbo125]

Hello

I tried to retasrt my system, but it doesn't work.

Before i post my question i found this thread:

 

i can't find a solution in the thread. Does anybody knows, how he fixed it?

 

I need to restart the system.
Can i disable the user login to the beginn? i need to start without a login choice.

 

 

Thank you

 

 

Edited April 9, 2023 by jumbo125

[Igor]

On 4/8/2023 at 11:16 AM, jumbo125 said:

Can i disable the user login to the beginn? i need to start without a login choice.

You mean this?

https://www.google.com/search?q=debian+auto+login+cli

[jumbo125]

yes, but my problem is, that the restart not work. do you have a answer for it?

thank you

[dev001]

I have a similar continuous reboot issue and have narrowed it down...

 

I have an odroid-c2 with eMMC module flashed with Armbian_23.02.1_Odroidc2_jammy_current_6.1.14_xfce_desktop
I have the following connected to the USB ports.  1) USB to audio headphone/microphone jacks 2) Wifi keyboard dongle

 

Odroid-c2 starts up ok and presents me with the XFCE desktop.

 

The issue is if I have both the eMMC module and a SDHC card on the system and power up the system, it continuously reboots. Note that the SDHC card is not bootable. Just formatted with ext4

 

Note that I could boot the odroid-c2 with either eMMC module or SDHC card flashed with Armbian.

Edited April 18, 2023 by dev001
more info

[jumbo125]

Is there any solution to fix the problem or detect the fail?

Edited May 2, 2023 by jumbo125

[jumbo125]

@dev001

i use a  64GB Micro Micro SD Card MicroSDXC. reboot not work. can you give me a tip?

[dev001]

My observation is that you should have either an eMMC or SDHC card installed but not both. Installing both would cause a boot issue.

[jumbo125]

i have only a SDHC card. No eMMC card. Why you believe that i use a eMMC card?

 

[dev001]

I was stating my observation about my odroidc2. If you only have SDHC installed then have you verified that your SDHC is specified as UHS-I?

Read this https://forum.odroid.com/viewtopic.php?t=37363

[jumbo125]

Am 18.4.2023 um 13:25 schrieb dev001:

The issue is if I have both the eMMC module and a SDHC card on the system and power up the system, it continuously reboots. Note that the SDHC card is not bootable. Just formatted with ext4

okay, i check it.

 

My card is ext4 formated 😞
can i change it? which format do i need to maket the sdhc bootable?

should it fix the problem, when i convert it?

Edited August 13, 2023 by jumbo125

[dev001]

As mentioned previously, make sure your SDHC card is specified as UHS-I

You do not need to format your SDHC card. You need to flash the card with the Armbian image for the odroidc2.

[jumbo125]

vor 8 Stunden schrieb dev001:

You do not need to format your SDHC card. You need to flash the card with the Armbian image for the odroidc2.

Okay, i had flashed it with the armbian image for the odroid c2. So my last chance is to check, if it is specified as uhs-i

 

i will try to find it out

thank you

 

EDIT: yes it is u1.

i have this:

https://www.amazon.de/gp/product/B08JYDZ75X/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Edited August 13, 2023 by jumbo125

[teknoid]