Can't flash Armbian to EMMC on Orange Pi 5B

[sns1081]

Hello everyone. I can't flash Armbian to EMMC on the OrangePi 5B board. I made an SD card, booted, ran armbian-install, selected Boot from EMMC/System on EMMC, the recording process was successful, but after that the board stops booting at all. When I boot from the SD card again, I see that EMMC is not a device in the system. There is no main mmcblk0, no mmcblk0boot0, no mmcblk0boot1.

 

I was able to get EMMC back only after re-flashing the standard Android firmware using RKDevTool via maskrom. When I flash Android to EMMC and then boot from the SD card with Armbian, /dev/mmcblk0, /dev/mmcblk0boot0 and /dev/mmcblk0boot1 are back in place.

 

Accordingly, I have some confusion:
1. Why, when booting from an SD card after flashing EMMC, none of the three devices mmcblk0, mmcblk0boot0 and mmcblk0boot1 are visible? What can be flashed there so that it falls off completely?
2. Why, when processing armbian-install, the system does not boot and how can I flash Armbian to EMMC?

 

I am using the image: Armbian_24.11.2_Orangepi5_bookworm_vendor_6.1.75_minimal.img.xz, I have previously tried others, including larger images with a graphical environment.
My board: Orange Pi 5B 16G/128G, revision 1.2. I have changed boards, tried three pieces.

[Werner]

moved

[z28z34man]

i had the same issues i rolled back to Armbian_23.8.1_Orangepi5_bookworm_legacy_5.10.160_cinnamon_desktop.img