Werner

Depends on how you use it. If you keep it that way you will have peace for the next two years since Stretch is in LTS stated and will be supported until June 30, 2022.

Can you provide an armbianmonitor -u as well?

Hm @dolphs@martinayotte did you experience these issues too? Should th Orangepi 3 be tweaked to a fixed clock by default?

I am pretty sure that @Rajesh said that and not me

1) you can install any DE you want using apt. 2) no 4) like in any other Linux distro 5) no idea

That is not related to this specific issue. Armbian cannot clock higher on H3 since there is no proper support for the voltage regulator.

Yup.

I have another One running for month now (also as Pihole) and never had issues with it. Issue recreated, though other virtual address this time. [16668.716765] Unable to handle kernel paging request at virtual address 3f00d700 [16668.723992] pgd = 61a9cd52 [16668.726701] [3f00d700] *pgd=00000000 [16668.730286] Internal error: Oops: 80000005 [#1] SMP THUMB2 [16668.735770] Modules linked in: rfkill zstd snd_soc_hdmi_codec dw_hdmi_cec dw_hdmi_i2s_audio snd_soc_simple_card sun8i_codec_analog snd_soc_simple_card_utils sun8i_adda_pr_regmap sun4i_i2s snd_soc_core ac97_bus sunxi_cedrus(C) snd_pcm_dmaengine v4l2_mem2mem videobuf2_dma_contig snd_pcm sun8i_drm_hdmi videobuf2_memops dw_hdmi lima snd_timer sun4i_gpadc_iio videobuf2_v4l2 cec snd gpu_sched industrialio videobuf2_common soundcore sun8i_thermal videodev mc sun4i_drm sun4i_frontend sun8i_mixer evdev sun4i_tcon sun8i_tcon_top uio_pdrv_genirq uio cpufreq_dt zram zsmalloc ip_tables x_tables autofs4 gpio_regulator fixed gpio_keys [16668.790725] CPU: 3 PID: 1 Comm: systemd Tainted: G C E 5.4.51-sunxi #trunk [16668.798726] Hardware name: Allwinner sun8i Family [16668.803435] PC is at 0x3f00d700 [16668.806577] LR is at 0xb6e8e746 [16668.809718] pc : [<3f00d700>] lr : [<b6e8e746>] psr: 20070093 [16668.815984] sp : d70edff8 ip : 000000c5 fp : 014df550 [16668.821207] r10: 00000000 r9 : bef6b288 r8 : b6f89c10 [16668.826431] r7 : 000000c5 r6 : b6f99968 r5 : b6f6bb1c r4 : 014df550 [16668.832957] r3 : b6ec6b45 r2 : bef6afe8 r1 : bef6afe8 r0 : 00000015 [16668.839484] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [16668.846707] Control: 50c5387d Table: 5688806a DAC: 00000055 [16668.852452] Process systemd (pid: 1, stack limit = 0xc59b4d99) [16668.858283] Stack: (0xd70edff8 to 0xd70ee000) [16668.862642] dfe0: 00000000 00000000 [16668.870824] Code: bad PC value [16668.873883] ---[ end trace e1c9811577573273 ]--- [16668.878507] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [16669.915929] SMP: failed to stop secondary CPUs [16669.920379] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---

A friend of mine told me that his OPi One freezes every couple of days for no reason. So I took it with me and see what I could find. I connected another SBC via serial to the board and wait until it freezes. This is what I have got and no idea what the reason is.... The armbianmonitor output is from a fresh restart after power cycle.

At the time the page was adjusted last time the unmodified kernel directly from Odroid did the best for this board. Maybe this has changed meanwhile, maybe not. Newer kernels have other issues that might be more severe than missing a few iptables modules. Also there might be a chance to adjust the 4.14 kernel via the build-system as well and add those modules by yourself. Anyway I do not think that this will be fixed by Armbian since it would be no real "stock" kernel anymore

As from what I have learned in the past that sometimes the matching header package is missing. Don't know the reason. @Igor may.

If you are talking about the headers and they are not in the repo I can't tell you, sorry. The easiest way around here is using the build script as written above to create matching packages.

Providing logs is essential for any support request since people sometimes using wrong images, inofficial or unsupported images. Feel free to use the build system for this purpose. You can add userpatches as well as adjusting the config. The script will output debs with the source, the image, matching headers as well as an u-boot package which all can simply be installed by using dpkg -i. https://github.com/armbian/build

You were using an outdated image. This issue has been fixed a while ago.

I guess they rebranded an armbian image which includes alternative drivers for xradio and added the temperature fix....

Hard to tell without further information. What image are you using? armbianmonitor -u

armbianmonitor -u

Odd. You could utilize steamroller tactics and place the symlink into conf-enabled directly and see what happens when you restart apache. Maybe there is something wrong with the config file itselt and therefore it is not detected properly.

Unsupported build Please provide logs via armbianmonitor -u

Best chance to get an idea about the temperature is a laser thermometer I guess...

For other distributions you can always install mesa from source. Also there is a PPA from oibaf which though does not seem to cut it with its the prebuild debs. Had more success with doing the first variant.

I think these wishes, besides the DE are out of range for Armbian. Armbian provides a usable kernel for many different boards and puts a OS over it with minimal adjustments to provide a mostly untouched experience with that OS. It is up to you to customize your OS as it is in any other distribution. By the way you can customize it even at image level while building. Check https://docs.armbian.com/Developer-Guide_User-Configurations/#user-provided-image-customization-script

Simply build a kernel package and then extract the created source debian package and check that particular file

Feel free to drop an image for the OPi1+ somewhere and I'll test it. I'm just out of time until monday.

1810000 -> 1488000 Did you reload cpufrequtils afterwards?