Jump to content

Armbian 23.02 (Quoll) Testings

Igor

By Igor
in Armbian Project Administration

 Share

Recommended Posts

Igor

Igor

Posted
Posted

 

In order to get best possible support status, please help us with testings. This last testing phase is a final check to see if devices boots and if basic functions work. We can only fix minor issues, try to recreate or remove broken images, but its also good if we write down what is wrong https://www.armbian.com/bugs/

 

Deadline for submitting test report: February 24th

 

Armbian has its own infrastructure for automated testings. But its limited so we need additional help with manual testings. Results:

 

quoll-auto-tests.png

 

- release candidate testings. Images has been uploaded to: https://stpete-mirror.armbian.com/dl/ -> BOARD/rc/

 

Publish report to:

https://www.armbian.com/rc-testing/

or comment below.

 

(I have manually tested Odroid N2+, Rockpi 4 1Gb)

 

@Contributor/Maintainer

In order to get your work into the release log, add a title, URL to commit / PR and set "Fix version" to 23.02

Link to comment
Share on other sites
  • Igor changed the title to Armbian 23.02 (Quoll) Testings
  • Igor unpinned this topic
schwar3kat

schwar3kat

Posted
Posted

Orangepi-r1plus-lts tested success:
Armbian_23.02.1_Orangepi-r1plus-lts_bullseye_current_5.15.93.img.xz
Armbian_23.02.1_Orangepi-r1plus-lts_bullseye_current_5.15.93_minimal.img.xz
Armbian_23.02.1_Orangepi-r1plus-lts_jammy_current_5.15.93.img.xz

All images tested and working as expected. 
Iperf performance is as expected in both directions on both ports simultaneously.
2 images listed on RC testing form (minimal build left off).

1
Link to comment
Share on other sites
  • Igor pinned and featured this topic
schwar3kat

schwar3kat

Posted
Posted

Orangepi-r1 tested success:
Armbian_23.02.1_Orangepi-r1_bullseye_current_5.15.93.img.xz
Armbian_23.02.1_Orangepi-r1_bullseye_current_5.15.93_minimal.img.xz
Armbian_23.02.1_Orangepi-r1_jammy_current_5.15.93.img.xz

 

All images tested and working as expected.
Iperf performance is as expected in both directions on both ethernet ports simultaneously.
Wifi works.
2 images listed on RC testing form (minimal build left off).

1
Link to comment
Share on other sites
schwar3kat

schwar3kat

Posted
Posted

Orangepizeroplus tested success:
Armbian_23.02.1_Orangepizeroplus_bullseye_current_5.15.93.img.xz
Armbian_23.02.1_Orangepizeroplus_bullseye_current_5.15.93_minimal.img.xz
Armbian_23.02.1_Orangepizeroplus_jammy_current_5.15.93.img.xz

 

All images tested and working as expected.
Iperf performance is as expected in both directions on ethernet and wifi ports simultaneously.
2 images listed on RC testing form (minimal build left off).

1
Link to comment
Share on other sites
ALIGMSTEN

ALIGMSTEN

Posted
Posted

Tested:

Armbian_23.02.1_Orangepizero2_bullseye_edge_6.1.11.img.xz

Normal, first start, boot and reboot.

DT known parts missing as expected.

htop - can add temp and cpu frequency, however not in DT (forgot to check version)

 

Armbian_23.02.1_Orangepizero2_bullseye_legacy_4.9.318.img.xz

Does not boot. (am sure serial output will be booti error - will check if you need)

 

boot.cmd is incorrect (copied direct from image sd card)

  

# DO NOT EDIT THIS FILE
#
# Please edit /boot/armbianEnv.txt to set supported parameters
#

# default values
setenv load_addr "0x45000000"
setenv overlay_error "false"
setenv rootdev "/dev/mmcblk0p1"
setenv verbosity "1"
setenv rootfstype "ext4"
setenv console "both"
setenv docker_optimizations "on"
setenv bootlogo "false"

# Print boot source
itest.b *0x10028 == 0x00 && echo "U-boot loaded from SD"
itest.b *0x10028 == 0x02 && echo "U-boot loaded from eMMC or secondary SD"
itest.b *0x10028 == 0x03 && echo "U-boot loaded from SPI"

echo "Boot script loaded from ${devtype}"

if test -e ${devtype} ${devnum} ${prefix}armbianEnv.txt; then
	load ${devtype} ${devnum} ${load_addr} ${prefix}armbianEnv.txt
	env import -t ${load_addr} ${filesize}
fi

if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=ttyS0,115200 console=tty1"; fi
if test "${console}" = "serial"; then setenv consoleargs "console=ttyS0,115200"; fi
if test "${bootlogo}" = "true"; then
	setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
else
	setenv consoleargs "splash=verbose ${consoleargs}"
fi

# get PARTUUID of first partition on SD/eMMC it was loaded from
# mmc 0 is always mapped to device u-boot (2016.09+) was loaded from
if test "${devtype}" = "mmc"; then part uuid mmc 0:1 partuuid; fi

setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"

if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=memory swapaccount=1"; fi

load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
fdt addr ${fdt_addr_r}
fdt resize 65536
for overlay_file in ${overlays}; do
	if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/allwinner/overlay/${overlay_prefix}-${overlay_file}.dtbo; then
		echo "Applying kernel provided DT overlay ${overlay_prefix}-${overlay_file}.dtbo"
		fdt apply ${load_addr} || setenv overlay_error "true"
	fi
done
for overlay_file in ${user_overlays}; do
	if load ${devtype} ${devnum} ${load_addr} ${prefix}overlay-user/${overlay_file}.dtbo; then
		echo "Applying user provided DT overlay ${overlay_file}.dtbo"
		fdt apply ${load_addr} || setenv overlay_error "true"
	fi
done
if test "${overlay_error}" = "true"; then
	echo "Error applying DT overlays, restoring original DT"
	load ${devtype} ${devnum} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
else
	if load ${devtype} ${devnum} ${load_addr} ${prefix}dtb/allwinner/overlay/${overlay_prefix}-fixup.scr; then
		echo "Applying kernel provided DT fixup script (${overlay_prefix}-fixup.scr)"
		source ${load_addr}
	fi
	if test -e ${devtype} ${devnum} ${prefix}fixup.scr; then
		load ${devtype} ${devnum} ${load_addr} ${prefix}fixup.scr
		echo "Applying user provided fixup script (fixup.scr)"
		source ${load_addr}
	fi
fi

load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd
load ${devtype} ${devnum} ${kernel_addr_r} ${prefix}Image

booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}

# Recompile with:
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr

 

Link to comment
Share on other sites
jock

jock

Posted
Posted

Tested OrangePi 4 LTS:

  • Armbian_23.02.1_Orangepi4-lts_jammy_current_5.15.93_xfce_desktop.img.xz
  • Armbian_23.02.1_Orangepi4-lts_bullseye_current_5.15.93_minimal.img.xz

Bluetooth adapter is detected, but this time I was unable to pair with the usual audio speaker

The rest seems to work pretty well

1
Link to comment
Share on other sites
jock

jock

Posted
Posted

Tested Asus Tinkerboard:

  • Armbian_23.02.1_Tinkerboard_jammy_current_6.1.11_xfce_desktop.img.xz

Most of the hardware seems to work pretty fine and the board is stable.

Bluetooth adapter is not detected at all (perhaps some kernel config bits are missing? Need to check this...).

I got a weird stack trace when launching the "Celluloid" application, but it seems more a kernel bug rather than anything related to armbian.

An old 2Gb USB stick did trigger lot of weird USB errors, the stick works perfectly elsewhere, perhaps some compatibility issues. Overall, USB ports are working with other devices.

Wireless performance is swinging from 1 mbps to 12 mbps, not really clear why, but connection is stable.

 

 

 

Link to comment
Share on other sites
Igor

Igor

Posted
  • Author
Posted

- build framework switched today

- OK, we are going out with this. Rsync mirror is pushing at average of 1GBbit/s + for a whole day :)

- short video about release was recorded today

- release announcement is in the works

Link to comment
Share on other sites
Herc

Herc

Posted
Posted (edited)

none of the images from https://www.armbian.com/odroid-c2/ seem to boot at all 
(tested: Armbian 23.02 Bullseye CLI and Jammy Gnome desktop on two SBCs)
 

img burnt, power connected, blank screen, no blue LED "heartbeat" blinking.

 

previously Armbian_23.02.1 from ../rc/ booted ok

(just had that "no reboot" issue)

 

Edited by Herc
typo
Link to comment
Share on other sites
  • Igor unpinned this topic
 Share
Go to topic listing
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines

  I accept