SBC News

Description armbian-resize-filesystem has the following bugs: Only support 1 or 2 partitions If more than 1 partition, it assume the root partition starts from the end of the first partition plus 1. The way to calc the number of partitions is incorrent it will skip expanding partition when growroot is installed. But growroot does support crypt I rewrite it to solve these bug. How Has This Been Tested? [X] 1 partition [X] 2 partition [X] 2 partition with crypt [X] 3 partition (UEFI without growroot) [X] 4 partition with crypt (UEFI without growroot) Checklist: [ ] My code follows the style guidelines of this project [X] I have performed a self-review of my own code …

Espressif Systems have announced their one-stop Matter solution that features their ESP32, ESP32-C, and ESP32-S series wireless microcontrollers with WiFi and/or Bluetooth LE connectivity, as well as the ESP32-H series with an 802.15.4 radio for Thread and Zigbee connectivity. Matter, which was first introduced in 2019 as Project CHIP, aims to improve interoperability among Smart Home products, has a focus on security, and the protocol is supposed to work on top of the most popular communication standards like Ethernet, Thread, 802.15.4, WiFI, Bluetooth, and so on, but more on that later. The first commercial products with support for Matter are scheduled for the end of t…

Description It seems like, with no other network service to bring them up (networking, NetworkManager), systemd-networkd will not set "up" the wan and lan0/lan1 interfaces. To fix this, the default systemd.network files get the line "BindCarrier=eth0" to bring those three interfaces up with the mii port. This should make no change for most users. View the full article

Changes to the add-board patch did not get added to the makefile patch. Fixed. Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number AR-1258 How Has This Been Tested? Build and boot tested Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged…

Description Orange Pi 4 and Orange Pi 4 LTS were the last boards using staging USB3 Type-C controller. This PR moves both of them to use mainline driver, so staging driver can be removed from patchset (as suggested by @Tonymac32 here: https://github.com/armbian/build/pull/3953#issuecomment-1172962963) Most of the changes have been adapted upon the same nodes from tinkerboard 2 device tree and GPIOs have been adjusted. Since both opi4 and opi4 LTS share the same hardware, I felt it could be useful to change on both boards. Probably if it works for my opi4 LTS also works for regular opi4; I will do my tests, if @piter75 wants to do private tests, in compatibility with hi…

Description When compiling using vagrant as build environment, the first option following vagrant is skipped. ./compile.sh vagrant foo bar In this example foo is skipped. This PR fix that bug. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] An image was successfully built using vagrant as builder. Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes …

fix dir patch media edge View the full article

Description Media EDGE does not build. Reverting it to 5.18.y How Has This Been Tested? [x] Build test View the full article

The GEEKOM MiniAir 11 is not just another mini PC powered by an Intel Jasper Lake N5095 processor but one that distinguishes itself by having a comprehensive range of ports. GEEKOM kindly sent a MiniAir 11 for review and I’ve looked at performance running both Windows 11 and Ubuntu 22.04. MiniAir 11 hardware overview The GEEKOM MiniAir 11 physically consists of a 117 x 112 x 34.2mm (4.61 x 4.41 x 1.35 inches) square plastic case. As an actively cooled mini PC, it uses Intel’s new 10 nm Jasper Lake N5095 processor which is a quad-core 4-thread 2.00 GHz Celeron processor boosting to 2.90 GHz with Intel’s UHD Graphics. The front panel has an illuminated power button, a 3.5mm…

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Add libvirt support to Vagrantfile [X] Build Bullseye image successfully Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [X] I have made corresponding changes to the documentation [X] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstre…

Description Update odroidxu4-current kernel to 5.4.204. How Has This Been Tested? [x] Cold reboot of my Odroid HC1 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Refactor orangepi-r1plus-lts dts Remove redundant node and remove Nanopi dependencies Moved Nanopi nodes to orangepi-r1plus-lts dts Renamed patch to match other rockchip64 boards Jira reference number AR-1255 How Has This Been Tested? Tested on orangepi-r1plus-lts Bidirectional iperf tests on both lan0 and eth0 produced expected results Checklist: [X ] My code follows the style guidelines of this project [X ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X ] My changes generate no new warnings [ ] Any dependent changes have been merged and…

Banana Pi is better known for its Arm Linux boards, but the company’s Banana Pi BPI-Leaf-S3 board features Espressif ESP32-S3 dual-core WiFi & BLE AI processor, with compatibility with ESP32-S3-DevKitC-1 minus a built-in USB to TTL chip, and added support for battery and an I2C connector. Banana Pi Leaf (BPI-Leaf-S3) specifications: Wireless MCU – Espressif Systems ESP32-S3 dual-core Tensilica LX7 @ up to 240 MHz with vector instructions for AI acceleration, 512KB RAM, wireless connectivity Storage/Memory – 8MB flash, 2MB SPRAM Connectivity via ESP32-S3 2.4 GHz 802.11 b/g/n Wi-Fi 4 with 40 MHz bandwidth support Bluetooth Low Energy (BLE) 5.0 and Mesh connectivity with…

This is just imported from the old configurator code, and slapped into a module in 10 minutes. There's duplicated code and I should focus on a better folder architecture before writing new modules. Still, this is done and should show you can "just convert function into a module in 10 minutes" or something. Signed-off-by: Myy Miouyouyou myy@miouyouyou.fr View the full article

Is RISC-X next? Bao Yungang, a professor and scientist at the Chinese Academy of Sciences and the secretary-general of the China RISC-V Alliance, has suggested RISC-V related standard specifications can be bifurcated into a new RISC-X standard independently developed in China for the “Belt and Road” countries. The world has become more complicated with new sanctions imposed nearly every week, and those include not only primary sanctions but also secondary sanctions where non-sanctioned countries engaged in business or partnership with sanctioned countries may be penalized too. This has been around for years, for example, I had to sign a document in 2019 saying I would not…

Seeed Studio’s XIAO family of tiny MCU boards expands with the XIAO ESP32C3 board equipped with ESP32-C3 WiFi and Bluetooth LE (BLE) microcontroller, support for LiPo batteries, and following the same 21 x 17.5mm form factor. If I’m counting right, this is the fifth member following the original XIAO based on Microchip SAMD21G18 Cortex-M0+ MCU, XIAO RP2040, and the nRF52840-based XIAO BLE and XIAO BLE Sense boards which I tested with Edge Impulse. XIAO ESP32C3 specifications: Wireless MCU – Espressif Systems ESP32-C3 single-core RISC-V microcontroller @ 160 MHz with 400KB SRAM, 384KB ROM, 4MB flash Wi-Fi 4 & Bluetooth LE 5.0 connectivity Antenna – External u.FL anten…

Adventures in NIR-land: the past, the present, and what's lies ahead for the native NIR back-end for Mesa's R600 driver. View the full article

Intel Meteor Lake processor family is supposed to succeed the 13th generation Raptor Lake chips itself coming after the current 12th generation Alder lake processors. It is scheduled to launch next year (2023), but we already have some details about the Meteor Lake U, P, and H mobile processors from a leak. Just like most Alder Lake processors, Meteor Lake will be hybrid processors with power and energy-efficient cores, but they’ll also feature new LP E-cores which should stand for “low power efficiency” cores in order to further lower the power consumption while a laptop or mini PC in standby mode. Meteor Lake mobile processors highlights: CPU P cores + E cores + LP-E co…

Description After some experimenting I found a way to flush the journal and maintain logs in tmpfs using /run/log/journal, and only have a softlink from /var/log/journal to /var/log.hdd/journal. Additionally the cached journals are to be cleaned up when /var/log becomes too full. Some logic was needed in cases where the user decides to do Storage=volatile journal logging in /etc/systemd/journald.conf, or when the user or journald with Storage=persistent creates a /var/log/journal folder which will be moved to /var/log.hdd/journal and replaced by the softlink. I didn't find any documentation, so wasn't able to update it. Jira reference number [AR-9999] How Has This Bee…

Once upon a time, people tried to avoid STM32 fakes and clones, but in a world where companies are allegedly purchasing washing machines to extract a few unavailable components, people have started to look for alternatives, and last week I wrote about the Geehy APM32 family of STM32 clones. But I had never heard about Flashchip Microelectronics FCM32 microcontrollers, and they are even not that easy to find in search engines, so they must be relatively new. The company appears to make both FCM32F clones and FCM32H derivatives with no direct equivalent STM32 part numbers, a higher clock frequency, and faster flash. For example, the FCMF030F4P6 will match the specifications…

CANBed M4 development board based on Microchip SAM E51 Cortex-M4 microcontroller and MCP2542FD CAN transceiver provides a more powerful alternative to the CANBed RP2040 with a Raspberry Pi dual-core Cortex-M0+ microcontroller introduced last year. The board supports both CAN 2.0 and CAN FD with a 4-pin terminal block or a DB-9 connector, and offers expansion capabilities though two Grove connectors, and an 18-pin IO header. CANBed M4 specifications: MCU – Microchip ATSAME51G19A Arm Cortex M4 core @ up to 120 MHz with 512KB flash, 192KB RAM CAN Microchip MCP2542FD CAN transceiver with support for CAN 2.0 and CAN FD up to 2+ Mbps Input interface – DB-9 connector or terminal…

Description Recent dts overlays broke cpufreq and SDnand support for Rock-PI-S. This patch simply deletes those 2 .dts files board-rockpis-0028-arm64-dts-rk3308-add-opp-1300mhz.patch board-rockpis-0030-disabled-emmc-fix-boot-sdcard.patch How Has This Been Tested? Rebuilt kernel without the two .dts files. Verified that cpufreq and SDnand functions both restored. One open issue is that the currently shipping RK3308B-S SOC silicon is being overvolted by the CPU operating points Armbian is using. I have discussed this in the forum: https://forum.armbian.com/topic/11228-rock-pi-s-rk3308-cpu-is-it-supported-by-anything/page/3/#comment-143389 Fixing this is straightforward…

STMicro introduced the VL53L8 multi-zone direct Time-of-Flight (dToF) sensor last month, but here’s another ToF sensor with VL53L5CP specifically designed for the PC market with the enablement of features such as user detection, gesture recognition, and intruder alert. STMicro says the ranging sensor continuously scans its field of view to map the scene and gather intelligence without using a camera or recording images. With 64 (8×8) zones within a wide 61-degree field, the VL53L5CP can detect and track multiple targets, calculating at their X/Y/Z coordinates and motion at high speed. VL53L5CP features: 940 nm invisible Vertical Cavity Surface Emitting Laser (VCSEL) and i…

Description Expand oneshot eth reset service for JetHub J100. Changed only JetHub BSP Jira reference number AR-1098 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] builds ok [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the…

Open Acoustic Devices’ HydroMoth is the underwater equivalent of the AudioMoth full-spectrum acoustic device that records audio samples mostly to monitor wildlife. Still based on a Silicon Labs EFM32 Wonder Gecko MCU, the HydroMoth is firmware-compatible with AudioMoth, enables audio recording at up to 60 meters deep, and has been tested to last two months at a depth of 30m using three AA batteries. HydroMoth key features and specifications: Wireless microcontroller – Silicon Labs EFM32 Wonder Gecko Cortex-M4F MCU @ 48MHz with 256kB Flash, 32kB RAM Storage – MicroSD card slot to store audio data Audio capture Onboard analog MEMS microphone acting as contact hydrophone Ana…

Firefly ITX3588J mini-ITX motherboard with Rockchip RK3588 SoC now has a little sister/brother based on Rockchip RK3568 quad-core Cortex-A55 processor called ITX-3568JQ, and designed to power Arm PCs, cloud terminals, industrial controllers, edge computers, advanced NVR, NAS devices, and more. The motherboard supports up to 8GB RAM, 128GB eMMC flash, offers SATA storage, dual Gigabit Ethernet, WiFi 6, optional 4G or 5G cellular connectivity, can handle up to three independent displays, and offers plenty of I/O options including an RS232/RS485 DB9 connector and a PCIe slot. Firefly ITX-3568JQ specifications: SoC – Rockchip RK3568J quad-core Arm Cortex-A55 processor @ up to…

Description Fix OrangePi One Plus early manufactured board dosen't work with current and edge kernel Discussion about issue: https://forum.armbian.com/topic/21009-orange-pi-one-plus-early-manufactured-board-does-not-work-with-515x-kernel/ https://forum.armbian.com/topic/20227-gave-up-waiting-for-root-file-system-device/ View the full article

Description as the RK3328 USB3 phy driver adaptation from legacy kernel is no longer needed or compatible with Mainline, remove it. 2 affected boards: Station M1 is no longer supported by the Rockchip64 kernel, remove it's specific patches OrangePi R1 LTS refers to the PHY driver-introduced node to control an LED. remove that node. How Has This Been Tested? Build tested Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [X] Any depe…

The latest release of Weston was made on February 1, 2022. Meanwhile, a few bugs were discovered and we decided to do a bug-fix release, which we haven't had in several years. View the full article

Texas Instruments Sitara AM623 and AM625 Arm Cortex-A53 AIoT processors were just introduced last month, but Forlinx has already introduced the OK6254-C SBC powered by the Sitara AM6254 quad-core processor with up to 2GB DDR4, and an 8GB eMMC flash. The board features two Gigabit Ethernet ports, CAN FD and RS485 interfaces, plus plenty of I/O headers, support for up to three displays via LVDS and parallel RGB interfaces, as well as optional support for 4G/5G cellular connectivity that makes it suitable for all sorts of industrial applications. Forlinx OK6254-C specifications: FET625x-C SoM SoC – Texas Instruments AM6254 quad-core Cortex-A53 processor @ 1.4GHz with Corte…

LILYGO must be churning out at least one new “ESP32” board every month, but I don’t think they’ve ever made one with ESP32-S3. LILYGO T-QT V1.1 board changes that and combines the dual-core WiFi 4 and Bluetooth LE 5.0 AI microcontroller with a 0.85-inch color display. The board also happens to be rather small and cute with a 33 x 18 mm form factor, offers some I/O via headers and a 4-pin connector, and can be powered via its USB Type-C port or a battery, but lacks a charging circuit. LILYGO T-QT V1.1 specifications: Wireless MCU – Espressif Systems ESP32-S3 dual-core Tensilica LX7 @ up to 240 MHz with vector instructions for AI acceleration, 512KB RAM, wireless connectivi…

Radxa ROCK5 Model B (aka ROCK 5B) is one of the most anticipated Rockchip RK3588 single board computers due to its features set and relatively affordable price. It was first showcased in January, but it’s taking a while as the Cortex-A76/A55 SoC is a complex beast. The good news is that the public launch is getting closer as Radxa sent “developer edition” samples to developers and enthusiasts for a “debug party”. I was one of the recipients so, in this post, I’ll have a closer look at the latest revision of the board, and give it a quick try first before going into more details in the second of this preview. ROCK5 Model B unboxing I received the 16GB RAM version which sho…

Bumps ossf/scorecard-action from 1.1.1 to 1.1.2. Release notes Sourced from ossf/scorecard-action's releases. v1.1.2 What's Changed Fix for ossf/scorecard-action#329 Full Changelog: https://github.com/ossf/scorecard-action/compare/v1.1.1...v1.1.2 Commits ce330fd ✨ use GITHUB_TOKEN when repo_token is empty on PRs (#335) 2e062bc Get repo info from REST API if event file is unavailable (#576) 85bc05a :seedling: Bump github.com/sigstore/cosign from 1.8.0 to 1.9.0 (#331) f8cb15a :seedling: Bump github/codeql-action from 2.1.11 to 2.1.12 (#339) fe5d183 :seedling: Bump actions/cache from 3.0.2 to 3.0.4 (#393) ed46015 :seedling: Bump debian from 06a93cb to f695745 (#53…

Bumps igorjs/gh-actions-clean-workflow from 1 to 2. Release notes Sourced from igorjs/gh-actions-clean-workflow's releases. v2 What's Changed chore(deps-dev): bump eslint from 8.11.0 to 8.15.0 by @​dependabot in igorjs/gh-actions-clean-workflow#23 chore(deps): bump @​actions/core from 1.6.0 to 1.8.2 by @​dependabot in igorjs/gh-actions-clean-workflow#25 chore(deps-dev): bump @​vercel/ncc from 0.33.3 to 0.33.4 by @​dependabot in igorjs/gh-actions-clean-workflow#24 chore(deps-dev): bump jest from 27.5.1 to 28.1.0 by @​dependabot in igorjs/gh-actions-clean-workflow#26 chore(deps-dev): bump eslint from 8.15.0 to 8.16.0 by @​dependabot in igorjs/gh-actions-clean-workflow#…

test all model use media View the full article

ORICO has sent me a sample of a USB 4.0 M.2 NVMe SSD enclosure for review, which was timely as I did not have a fast USB storage option for testing. In this post, I’ll check out the hardware, show how to install an NVMe SSD, and test performance in UP Xtreme i11 mini PC since it happens to come with a USB 4.0 port. ORICO USB 4.0 M.2 SSD enclosure specs and unboxing The exact model I received is the ORICO M234C3-U4 with a Rose Gold aluminum enclosure (107x50x17mm), supporting M.2 M-Key and B+M Key 2230, 2242, 2260, 2280 SSDs (more on that later), and offering up to 40 Gbps through its USB 4.0 port. The device ships with a USB Type-C to USB Type-C/Type-A cable, a thermal pa…

Tested on all models that use this kernel media\station. View the full article

STEPFPGA MXO2Core miniature FPGA development board is based on Lattice MXO2-4000 FPGA, and designed for education with an easy-to-use Web IDE, instead of the more traditional tools that can be frustrating to use, and detailed tutorials. The board also comes with a 2-digit segment display, some LEDs, push buttons, and a 4-way DIP switch, as well as two rows of twenty pins for I/O expansion, and a USB Type-C port used for power, programming, or mass storage. STEPFPGA MXO2Core specifications: FPGA – Lattice Semi MachXO2 X02-4000 FPGA with 4320 LUTs Display – 2-digit segment display USB – 1x USB Type-C port for power, programming (UART), and mass storage Expansion – 2x 20-pin…

Description Follow up on #3943, this hack appears to fix Zero's eMMC boot issue when paired with Kingston eMMC module. How Has This Been Tested? This hack has been tested with upstream U-Boot 2022.04 and was confirmed working. View the full article

Description outdated PHY driver no longer necessary, incompatible with 5.15. RK3328-roc-pc was not adjusted, no board to test. With it transitioned we can eliminate the phy driver patch entirely. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. Renegade and Rock64 v3 both tested Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings…

Geehy APM32F103 is a clone of STMicro STM32F103 MCU that has been tested by at least one person who claims it was just a drop-in replacement and PCB, code, hex, testing, and production did not have to be changed at all. Most STM32 microcontrollers are in short supply with 52+ weeks lead times and prices going through the roof, so people may be looking into the long list STM32 clones and fakes including APM32F103. They all claim to be pin-to-pin and firmware compatible, but when theory meets reality, things may go wrong. For instance, last year I had a conversation with one person who switched to GD32 microcontroller and had all sorts of issues (translated from French): I …

Description Prepare for support JetHub D1p device. This is first step. uboot 2022.07-rc5 (only jethome devices) update uboot jethome patches some updates for kernel patchset all changes only for jethub devices. Jira reference number AR-1232 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] jethub builds ok [X] no kernel patch error added Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding cha…

Raspberry Pi Trading announced the Raspberry Pi Pico W board basically based on the same design as the original Raspberry Pi Pico board with RP2040 dual-core Cortex-M0+ microcontroller but adding a wireless module with WiFi 4 and Bluetooth LE 5.2, although the latter is not enabled on the board at this time. The company sent me a sample for review/evaluation, and I’ll focus on the WiFi part since the Raspberry Pi Pico W supports the same MicroPython and C/C++ SDKs as for the Raspberry Pi Pico board plus additional APIs for wireless connectivity. Raspberry Pi Pico W unboxing The board I received was cut from a 480-unit reel, and I also got a one-meter long micro USB to USB…

Description Due to reports of possible corruption in images, we need to implement more checks. Jira reference number AR-1236 How Has This Been Tested? Not working yet. Just POC. Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Maintenance. How Has This Been Tested? [x] Odroid XU4 build test Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description clean patch and enable Type C on roc-rk3399-pc How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. compile and boot test Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [X] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [X] Any dependent changes have been merged and published in downstream modules View the full article

ROMA is an upcoming Linux laptop equipped with an unnamed quad-core RISC-V processor with GPU and NPU, up to 16GB RAM, 256GB storage, primarily aimed at software developers, and with Web3 technology integration. The ROMA laptop will be born out of the collaboration between DeepComputing working on engineering and Xcalibyte taking care of system tuning, plus PW (assembly), ECP (security), XC (crypto), Rexeen (voice), and the LatticeX Foundation (PoS blockchain, NFT). ROMA laptop preliminary specifications: SoC – Quad-core RISC-V CPU with GPU for graphics, NPU for AI (12nm chip for the Pro model, 28nm chip for the Standard model) System Memory – 16GB LPDDR4/LPDDR4X RAM Sto…

adding new apps to build to allow for use of telegram/pidgin/discord and others View the full article

ZigUNO Zigbee development board comes with an Ebyte E18-MS1 module equipped with Texas Instruments SimpleLink CC2530 8051 Zigbee microcontroller and follows Arduino UNO form for Arduino Shield compatibility. The board works with PTVO Zigbee firmware that comes with a graphical configuration tool to select the Zigbee chip used (CC2530), configure I/O behavior (input/output, pull-up, etc…), and more. The developers also suggest using DIYRuZ projects as examples to get started. ZigUNO board specifications: Zigbee module – Ebyte E18-MS1-PCB module with TI SimpleLink CC2530 8051 microcontroller with Zigbee 3.0 (and IEEE 802.15.4) connectivity, 256kB Flash and 8kB RAM, PCB ante…

Description Bug & cosmetic fix. View the full article

We first wrote about Allwinner T507 when we covered a module and devkit from Forlinx, but now MYiR Tech has designed its own AEC-Q100 qualified system-on-module (MYC-YT507H) and the MYD-YT507H development board based Allwinner T507-H processor. MYC-YT507H – Allwinner T507-H SoM Specifications: SoC – Allwinner T507-H with a quad-core Arm Cortex-A53 processor @ 1.5GHz, Arm Mali-G31 MP2 GPU with support for OpenGL ES 3.2/2.0/1.0, Vulkan1.1, OpenCL 2.0; 4K60 H.265/VP9/AVS2 video decoder, 4K H.264/MJPEG video encoder System Memory – 1 or 2GB LPDDR4 Storage – 8GB eMMC flash, 32Kbit EEPROM (or is it 32KB/256Kbit – see block diagram below) 222x castellated holes with 1.0mm pitch …

Energous WattUp wireless power technology delivers power at various ranges (up to a few meters), and so far, we’ve seen it in wearables like garments, as well as smart glasses and earbuds development kits. The company has now launched a wirelessly powered sensor evaluation kit for the Internet-of-Things (IoT) based on the 1W WattUp PowerBridge transmitter with Bluetooth LE 5.0, plus two battery-free sensor nodes based on Atmosic ATM3202 Bluetooth LE 5.0 Cortex-M0 microcontroller with energy-harvesting capabilities. Wirelessly powered sensor evaluation kit content & features: 1W WattUp PowerBridge transmitter Bluetooth LE microcontroller Energous EN4100 transmitter IC …

kde-plasma for debian sid and debian bullseye View the full article

Fix for gnome desktops to use lightdm lightdm-settings and slick-greeter like other desktops for default View the full article

Description add megous patches: tag: orange-pi-5.18-20220627-1924 switch to version tag=v5.18.8 Checklist: [ ] Test build sunxi [ ] Test build sunxi64 View the full article

Whilst the first mini PCs were relatively simplistic using low-powered Intel Atom processors with minimal memory, storage, and ports, more recent mini PCs have become so advanced they can challenge SFF builds for both performance and functionality. However, such mini PCs come with prices to match. Beelink has now released the MINI S which is a mini PC that goes back to the basics and is based on a cut-down version of their earlier Beelink U59 mini PC and priced to match. Beelink kindly sent one for review and I’ve looked at performance running both Windows and Ubuntu and compared it directly against the U59. Beelink MINI S hardware overview The Beelink MINI S physically c…

There are already several serial terminal programs such as Putty and minicom, and in recent times, I’ve been using Bootterm myself. But that does not mean there’s room for more and Martin Lund has developed tio serial device I/O tool for Linux. Martin found out many of the existing tools are very modem focused or a bit cumbersome to use, so he developed tio as the simpler alternative which puts less focus on classic terminal/modem features and more focus on the needs of embedded developers and hackers. While it’s possible to build tio from source… [crayon-62bd521173c5e569300188/] it’s much easier to install as a snap (and you should get updates automatically): [crayon-62b…

I was expecting the next official Raspberry Pi board to be either an update of Raspberry Pico with WiFi and Bluetooth or with a machine learning accelerator and the new $6 Raspberry Pi Pico W delivers that wish through the addition of 2.4GHz WiFi 4. Having said that, I was actually expecting a competitor to ESP8266 or ESP32 with a new Raspberry Pi wireless microcontroller, but it did quite happen that way as the Raspberry Pi Pico W features the same Raspberry Pi RP2040 dual-core Cortex-M0+ microcontroller found in Raspberry Pi Pico board coupled with an Infineon CYW43439 chip that’s supposed to support both 2.4 GHz WiFi 4 and Bluetooth LE 5.2, but Bluetooth is not mention…

We’ve already seen ESP32 WiFI & Bluetooth SoC combined with a cellular modem several times already, and a couple of days ago, I wrote about LILYGO T-A7068X ESP23 board with a 4G LTE modem. Iconic Devices team has made another cellular ESP32 product with the NORVI GSM industrial controller. The DIN-Rail mountable USB programmable controller is offered with a choice of SIMCOM SIM800L 2G-only modem or QUECTEL EC21-G modem adding 3G UMTS/HSPDA+ and 4G LTE cellular connectivity. It also offers Ethernet connectivity, digital and analog inputs, relay outputs, and a small 0.96-inch OLED information display with options varying depending on the exact model. NORVI GSM specifica…

Besides announcing the new Immortalis-G715, Mali-G715, and Mali-G615 GPUs, Arm has also introduced the second-generation of Armv9 cores with the Cortex-A715 and Cortex-X3 cores with respectively a 20% energy-efficiency improvement (and smaller 5% performance uplift) over the Cortex-A710 core and a 25% peak performance boost against the Cortex-X2 flagship core. The announcement also includes a “refresh” of the Cortex-A510 core announced last year with a 5% improvement in efficiency and the same level of performance. The Cortex-X3 will also be used in (Windows 11) laptop processors with the single-thread performance improved by up to 34% in that case. Armv9 mobile SoC (Tota…

Arm has unveiled the new Immortalis family of flagship GPUs with support for hardware-based ray tracing starting with the Immortalis-G715 GPU, as well as two new premium Mali GPUs namely Arm Mali-G615 and Mali-G715. Software-based ray tracing was already implemented on Arm Mali G710 on SoC’s such as the MediaTek Dimensity 9000, but the hardware-based ray tracing in the Immortalis-G715 delivers over 300 percent performance improvements, and only uses 4% of the shader core area. This will be mostly used in games to generate realistic lighting and shadows as can be seen in the “before vs after” video demo below. While hardware-based ray tracing is only available on the Imm…

Description This hack is needed for Radxa Zero to boot from Kingston eMMC. Foresee eMMC (which is what we used originally) appears to be unaffected. No kernel modification is required, which is explained here. Pinging @rpardini How Has This Been Tested? Several affected users including @lanefu had manually flashed a custom U-Boot with this hack and got board booting. View the full article

I’ve tested a few security cameras with human and vehicle detection capabilities, but Reolink has now added animal detection via the KEEN Ranger PT trail camera mostly designed to monitor four-legged animals in the wild. It’s somewhat similar to the Reolink Go Plus 4G camera with solar power support and 4G LTE connectivity, but also offers a 360° view with pan/tilt control, a low-glow IR night vision, a 0.5s fast trigger speed, as well as GPS to track the position of cameras or sightings of animals on the mobile app. KEEN Ranger PT camera key features and specifications: Camera/Video Image Sensor – 1/3″ CMOS Sensor Video Resolution – 2K 4MP high definition (2560 x 1440 @ …

MNT Pocket Reform is an open-source hardware mini laptop with a 7-inch Full HD display, an ortholinear mechanical keyboard, and trackball, that follows the path of its older and bigger sibling: the MNT Reform 2 laptop initially launched with an NXP i.MX 8M quad-core Arm Cortex-A53 module. The new laptop will not only support a similar “NXP i.MX 8M Plus” module but also a range of other Arm modules namely an NXP Layerscape LS1028A module with up to 16GB RAM, the Raspberry Pi CM4 module via an adapter, Pine64 SOQuartz (RK3566, up to 8GB RAM), as well as based on AMD Xilinx Kintex-7 FPGA for industrial use. MNT Pocket Reform specifications: Available system-on-modules Stand…

The new "Hello World" module should help people understand the minimum requirements. Note that these requirements will still change over time, given that the architecture is still in alpha stage. That said, having an overview module should help attracting developers more quickly than a lengthy documentation. On the docker side, the dependencies have been slightly improved, but that's actually a part of the architecture I'll have to revise, since one "DEPS" file is not enough for all the various ubuntu and debian versions. I still wonder if I'm going to mimic the 'config/...' folder architecture used for the installer, or if I'll try to shorten it with things like DEPS…

Revopoint MINI is a 3D scanner using high-resolution blue light that’s designed for smaller objects such as figurines, coins, jewelry, etc… that require a higher level of detail achievable thanks to the promised 0.02mm precision. The 3D scanner follows last year’s Revopoint POP 2 color 3D scanner with 0.1mm accuracy for larger objects, and the main differences are the lack of color scanning and the higher resolution most suitable for smaller objects, but also possible for larger objects while holding the scanner with one hand. It would just take longer since the MINI’s single capture range is 118 x 64mm, instead of 210 x 130mm for the POP 2. Revopoint MINI specifications…

LILYGO has designed another ESP32 board with a 4G LTE modem with the LILYGO T-A7608E-H & T-A7608SA-H variants equipped with respectively SIMCom A7608SA-H for South America, New Zealand, and Australia, and SIMCom A7608E-H for the EMEA, South Korean, and Thai markets, both delivering up to 150 Mbps download and 50 Mbps upload speeds. The board also supports GPS, includes a 18650 battery holder, and features I/O expansion headers that support an add-on board with RS485 and CAN bus interfaces, in a way similar to the company’s earlier TTGO T-CAN485 board with ESP32, but no cellular connectivity. LILYGO T-A7068E-H/T-A7608SA-H board specifications: Wireless Connectivity WiF…

Lattice Semi ICE40 boards are pretty popular notably thanks to the availability of open-source tools. ICE-V Wireless is another ICE40 UltraPlus FPGA board that also adds wireless support through an ESP32-C3-MINI-1 module with WiFi 4 and Bluetooth LE connectivity. Designed by QWERTY Embedded Design, the board also comes with 8MB PSRAM, offers three PMOD expansion connectors, plus a header for GPIOs, and supports power from USB or a LiPo battery (charging circuit included). ICE-V Wireless specifications: FPGA – Lattice Semi ICE40UP5K-SG48 FPGA with 5280 LUTs, 120 Kbits EBR RAM, 1024 Kbits PSRAM External RAM – 8MB PSRAM Wireless – ESP32-C3-MINI-1 module with 2.4 GHz WiFi 4 a…

Description KDE plasma desktop for Debian Sid Jira reference number [AR-9999] How Has This Been Tested? [ ] Build and boot Odroid N2 image Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

meson64: edge: rework to kernel 5.19 JIRA AR-1231 [x] based on the work done by @adeepn on #3898 -- thanks! [x] took the opportunity to finally remove CONFIG_ARCH_ROCKCHIP=y from meson64 .config [x] bumped to 5.19-rc3 without issue [x] backported a bunch of fixes I had done on 5.10 back in #3154 - namely: [x] remove meson_drv_shutdown revert patch, instead CONFIG_DRM_MESON=y and its dependencies in .config (this allows proper shutdown on non-ODROID, while keeping ODROID rebooting nicely -- reference https://lore.kernel.org/linux-arm-kernel/7h4kfjpe07.fsf@baylibre.com/T/ ) [x] N2(+): do NOT enable SD UHS mode, which cause next-reboot u-boot to not be able to use SD (vo…

Description Jira reference number AR-1249 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [ ] Test A [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number AR-1248 How Has This Been Tested? Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Mixtile Edge 2 Kit is a mini PC/IoT edge computer powered by a Rockchip RK3568 quad-core Cortex-A55 processor coupled with up to 4GB RAM and 32GB flash that features a 12V SATA + SMBUS port that allows the insertion of a 20Ah battery pack lasting up to 12 hours for locations where power may be intermittent. The 3.5-inch industrial mini PC also offers Gigabit Ethernet and WiFi 6 connectivity, three USB 3.0 ports, plus expansion with M.2 and mPCIe sockets, as well as a similar U.2 connector found in the company’s Mixtile Blade 3 SBC powered by Rockchip RK3588 processor, but routed to different interfaces. Mixtile Edge 2 Kit specifications: SoC – Rockchip RK3568 quad-core A…

Description Jira reference number AR-1245 How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Build and boot Cinnamon Sid image for Odroid N2 [x] Build and boot Budgie Sid image for Odroid N2 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View t…

Description Maintenance. Jira reference number [AR-9999] How Has This Been Tested? [ ] Tested build at MR View the full article

Description After some inspections related to pwm patch recently introduced and reverted on v5.18 kernel patchset (see https://github.com/armbian/build/pull/3928), it turned out that some boards (OrangePI 4/LTS, Tinkerboard 2) use a pinctrl configuration name active which is inherited from legacy kernel. Mainline kernel does not use such pinctrl configuration name, but wants default. This effect of this misnaming is an increased voltage supplied to "vdd_log" regulator and an increased power consumption since the configuration active is just ignored on mainline kernel. Power consumption has been tested using a regular multimeter, on my OrangePI 4 LTS board, and with the …

Description GPU governor for rk3399 (Mali T860, Panfrost driver) was set to “performance” 4 years ago due to issues with simple_ondemand; nowadays simple_ondemand works just fine. This fix makes my board (Orange PI 4 LTS) consume ~25mA (125mW) less current and obviously makes soc fresher. Jira reference number AR-1246 How Has This Been Tested? [x] Tested setting simple_ondemand manually on official Ubuntu Jammy XFCE image [x] Built Ubuntu Jammy XFCE image from scratch Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have m…

Description If 1st job is not run, no other will. We need to move IF to the step. Jira reference number AR-1244 How Has This Been Tested? [x] Manual run Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Closing https://github.com/armbian/build/issues/3862 View the full article

3D printing can be time-consuming and challenging, and even today, it’s still not as easy as using a photocopier, but the team at Bambu Lab has taken it upon itself to make a better, easier-to-use 3D printer with the X1 color 3D printer combining LIDAR and AI technology to level the bed, calibrate the prints, and detect anomalies. The Bambu Lab X1 3D printer supports up to 16 colors, is making removing support easier with snap-away material or dissolvable filament, can handle PC and PA-CF filaments beyond the traditional PLA and PETG filaments, manage up to 500 mm/s prints, and provides better prints with features such as active vibration compensation. Oh, and you don’t n…

The current patch is a direct copy of the OEM setup. It includes Nanopi dts files that belong to other boards. Remove unnecessary Nanopi device tree includes and files. Incorporate the appropriate nodes into orangepi-r1plus-lts tree. Remove the Nanopi dts files from the patch. Jira reference number AR-1243 Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. Tested on orangepi-r1-lts board. Iperf tests on both ports (ETH1 and LAN1) produced expected results in bidirectional tests. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my o…

Quectel SG560D is a 5G Sub-6GHz & WiFi 6E module for AIoT applications that runs Android 12 on a Qualcomm QCM6490 SoC with an octa-core Kryo 670 64-bit Arm CPU and a Qualcomm Adreno 643L GPU. The SG560D module is equipped with 4GB LPDDR4X RAM and 64GB UFS storage by default, supports up to 2520×1080 MIPI display at a refresh rate of 144Hz, and can deliver up to 14 TOPS for AI inference. Quectel SG560D key features and specifications: SoC – Qualcomm QCM6490 octa-core processor with one Kryo 670 Gold plus high-performance core up to 2.7 GHz, 3x Kryo Gold cores at 2.4 GHz, 4x Kryo Silver low-power cores @ 1.9 GHz, Adreno 643L GPU, 6th gen AI Engine delivering up to 14 TO…

Mark Himelstein, Chief Technology Officer, RISC-V International, and Dr. Philipp Tomsich, Chief Technologist & Founder, VRULL GmbH hinted that we may see a RISC-V laptop in 2022 in a presentation entitled “From Technology to Product – Maturing the RISC-V Ecosystem” with one of the slides showing what could be a RISC-V laptop prototype and The Register suspected it might come from the Institute of Software at the Chinese Academy of Sciences (ISCAS) since it was planning to build 2,000 RISC-V laptops by the end of 2022. But there’s at least one more potential RISC-V laptop project coming our way with StarFive asking users to fill out a survey about a laptop, mini PC, or…

I would not usually ask myself “is there a GPU?” in a Bluetooth LE SoC, but that’s exactly what Renesas SmartBond DA1470x Bluetooth 5.2 LE microcontroller offers with a 2D GPU used to accelerate the rendering of user interfaces in wearables, healthcare devices, home appliances with displays, industrial automation and security systems, as well as consoles in e-bikes and gaming equipment. The DA1470x also comes with a Cortex-M33 application core, a Cortex-M0+ sensor node controller, 1.5MB SRAM, and an ultra-low-power hardware VAD for always-on audio processing, as well as various peripherals. Specifications: CPU cores Arm Cortex-M33 core @ up to 160 MHz for the application …

Description Continuation of work on the development of a unified package installation function in the armbian build system. Sometimes we need to install a package as a package file that is located in the local directory. Now the function will independently calculate the package dependencies and install these dependencies and the package file itself. How Has This Been Tested? It is well tested. We can start using this new opportunity. [x] The installation of packages that are not available in the available repositories has been tested. The packages were taken\downloaded from third-party sources. Checklist: [x] My code follows the style guidelines of this project [x] I…

Mekotronics R58 is a cost-optimized Rockchip RK3588 mini PC and SBC that sells for as little as $169 with 4GB and 32GB eMMC flash. The company has now sent me a model with 8GB RAM and 64GB flash for evaluation, and in the first part of the review, I’ll do an unboxing, check out the hardware more closely, and boot it up for a quick check. Mekotronics R58 Unboxing There’s no retail package so to speak with just a white box and a sticker reading “MINI 8+64G” indicating the RAM and storage capacity for the device. The mini PC ships with a 12V/3A power adapter and cord, an IR remote control with two AAA batteries, two WiFi antennas, an HDMI cable, and a USB-A to USB-C cable pr…

DevTerm modular, portable Linux terminal initially designed for modules based on Raspberry Pi CM3 form factor, can now work with Raspberry Pi CM4 for extra performance and memory thanks to a $19 adapter. The Devterm was initially launched in 2020 with a 6.8-inch IPS screen, a keyboard with 67 keys, and a battery module, all connected through the ClockworkPi v3.14 carrier board taking a choice of core modules based on Allwinner H6 or Rockchip RK3399 (now supported in Armbian), besides the Raspberry Pi Compute Module 3 mentioned above. More recently, it also got an Allwinner D1 RISC-V module. The Raspberry Pi CM4 module should bring performance similar to the Rockchip RK33…

Kontron D3723-R is an industrial mini-ITX motherboard equipped with the just-announced AMD Ryzen Embedded R2000 processor family that delivers higher performance than Ryzen R1000 Series while keeping the costs lower than AMD Ryzen Embedded V2000 solutions, and enabling Windows 11 support. Manufactured in Germany, the Kontron D3723-R will be offered with Ryzen R2312, R2314, R2514 and R2544 SKUs, and be particularly suitable for embedded graphics applications such as professional casino gaming systems, medical displays, thin clients, industrial PCs, infotainment, and digital signage systems. Kontron D3723-R specifications: SoC (one of the other) AMD Embedded R2312 dual-core…

Avnet MaaxBoard 8ULP will be one of the first single board computers (SBC) based on the new NXP i.MX 8ULP Cortex-A35/M33 processor designed for Edge audio and HMI applications, and featuring NXP’s EdgeLock for device-to-cloud security. The board will come with 2GB RAM, 32GB eMMC flash, a MIPI DSI display connector, a MIPI CSI camera connector, Fast Ethernet and WiFi 5 connectivity, a digital microphone, and a 3.5mm stereo audio jack, and provide expansion capabilities via a 40-pin header for Raspberry Pi HATs and a 16-pin Shuttle Click header for MikroE Click add-on boards. MaaXBoard 8ULP SBC specifications: SoC – NXP i.MX 8ULP processor with 2x Arm Cortex-A35 core @ 1.0 …

Description Sorry for uplifting the discussion again around the PWM patch for rockchip64 again, but I did some further tests and I'm not convinced. The patch rk3568-pwm-rockchip.patch looks like a copy-paste patch from rockchip v5.10 kernel and I can't find it on patchwork.kernel.org patches, so I guess it is not suitable for mainline. There is some weird behaviour I'm experiencing. My test board is the rk3318 tvbox, but this is not a cons; instead this is a pro and I'm going to explain why: these tvboxes lacks proper voltage regulator chips (like rk805 or rk808) and instead heavily relies on PWM to do power regulation for CPU and Logic planes. When PWM goes nuts, the bo…

Imagination IMG RTXM-2200 32-bit RISC-V real-time CPU core is the first member of the company’s Catapult family comprised of four distinct RISC-V families for dynamic microcontrollers, real-time embedded CPUs, high-performance application CPUs, and functionally safe automotive CPUs. The company says it’s a highly scalable real-time, deterministic, 32-bit embedded CPU, that is feature-rich and flexible in design for mainstream devices, but, excuse the pun, leaves most of the details to your imagination… The new core will mostly be used as a helper core (aka co-processor) in more complex SoCs for 5G modems, cellular base stations, networking solutions for data transfer, pac…

Compulab IOT-GATE-IMX8PLUS is a new Arm Linux IoT gateway powered by NXP i.MX 8M Plus SoC with up to 8GB RAM, 128GB storage, and plenty of connectivity options with dual Gigabit Ethernet, WiFi 6, Bluetooth 5.3 LE, and 4G LTE connector, as well as GNNS support and RS485/RS232 interfaces. The new IoT gateway builds upon theArm SystemReady IR certified IOT-GATE-IMX8 industrial gateway, but offers more RAM and storage, a 2.8 TOPS AI accelerator (in the NXP processor), improved connectivity, as well as a DVI-D port for video output. Compulab IOT-GATE-IMX8PLUS specifications: SoC – NXP i.MX8M Plus Quad or Quad-lite quad-core Arm Cortex-A53 processor @ up to 1.8 GHz with Arm Cor…

We’ve written a couple of articles about Time-of-Flight (ToF) technology in recent weeks notably about ranging sensors such as VL53L8 dToF sensor and Toppan hybrid ToF sensor, but Orbbec has used the technology in their Femto camera line designed to capture 3D objects and scenes. The Femto 3D cameras support a depth-of-field (DoF) from 0.2 to 5 meters, multi-camera synchronization, can be used in complete darkness, and are equipped with a 6-Axis IMU tracking sensor for motion tracking. The ToF cameras should find their way into applications for healthcare, warehousing/shipping, autonomous robotics, augmented reality, and other sectors. Three models are available with the …

Espressif Systems ESP32-C5 is an upcoming wireless RISC-V microcontroller for IoT applications that supports dual-band (2.4 & 5.0 GHz) WiFi 6 connectivity as well as Bluetooth 5.0 LE. It is the first dual-band processor from Espressif, as while the Shanghai-based company previously announced the ESP32-C6 WiFi 6 and Bluetooth 5 LE RISC-V SoC last year, it only supports 2.4 GHz frequency. Note it’s not the first dual-band WiFi 6 IoT chip on the market as NXP introduced the IW612 Wi-Fi 6, Bluetooth 5.2, 802.15.4 tri-radio solution last January, but ESP32-C5 should target different use cases. ESP32-C5 preliminary specifications: CPU – Single-core 32-bit RISC-V processor @…

SolidRun RZ/G2LC SOM is a system-on-module based on Renesas RZ/G2LC single or dual-core Cortex-A55/M33 processor and designed for AI-enhanced human-machine-interface (HMI) applications, industrial and building automation, video surveillance, IoT, etc… The module is also equipped with 1GB DDR4 RAM, 8GB eMMC flash, and a wireless module with dual-band WiFi 4 and with Bluetooth 4.2 all packed into a tiny footprint measuring just 47 x 30mm that makes it suitable for space-constrained devices such as video doorbells and compact IP cameras. SolidRun RZ/G2LC SOM specifications: SoC – Renesas RZ/G2LC single or dual-core Arm Cortex-A55 processor @ up to 1.2 GHz with, 1x Cortex-M33…

Part steadfast approach - part welcoming spirirt; Collabora continues to successfully expand with new talent amply on deck. Well ahead of the remote work curve, our new joiners have settled into their roles from their respective corners of the planet. View the full article

Description One to many was enabled in CURRENT kernels. Odroid current is 5.4.y while for one wireless driver that is too old. https://github.com/armbian/build/pull/3918 Jira reference number AR-182 How Has This Been Tested? [x] Build test Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description As our CI progresses into a complicated suite, we are finding new and new small issues that its best to work on under one Jira story. Jira reference number AR-1238 How Has This Been Tested? [ ] Test B Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

As expected, AMD has now launched the Ryzen Embedded R2000 series processors that build up on the earlier Ryzen Embedded R1000 family, but doubles the number of cores to up to four, gets improved Radeon graphics, and adds support for Windows 11 operating system. Performance and efficiency have also improved with the new Ryzen Embedded R2515 CPU exhibiting up to 81 percent higher CPU (Passmark v10) and graphics (3DMark) performance compared to Ryzen Embedded R1606G processor, as well as higher performance-per-watt efficiency thanks to the Zen+ core architecture. The company has four Ryzen Embedded R2000 processors in its portfolio at launch. Key features and specifications…

Sipeed has launched the Lichee RV Dock Pro kit for the company’s Lichee RV Allwinner D1 RISC-V module that builds on the earlier Lichee RV Dock carrier board and adds a MIPI/RGB LCD connector, two built-in microphones, as well as an on-board JTAG+UART debugger based on Bouffalo Lab BL702 microcontroller. Lichee RV Dock Pro specifications (preliminary): Supported system-on-module (SoM) – Lichee RV module with Allwinner D1 RISC-V processor @ 1 GHz, 512MB DDR3, MicroSD card slot, and USB Type-C OTG port Storage – Optional SPI flash Display interfaces HDMI port up to 4Kp30 MIPI LCD/RGB interface for up to 720p30 display Audio – 3W power amplifier, 2x analog microphone, suppor…