Search the Community

kao@orangepi3-lts:~$ armbianmonitor -u Network/firewall problem detected. Not able to upload debug info. Please fix this or use "-U" instead and upload whole output manually kao@orangepi3-lts:~$ armbianmonitor -U armbian-hardware-monitor.log ### Activated 1 lzo-rle zram swap devices with 994MB each. ### Activated Armbian ramlog partition with zstd compression Thu Jun 23 03:13:46 AM UTC 2022 | Orange Pi 3 LTS | 22.05.3 | arm64 | aarch64 | 5.15.48-sunxi64 ### dmesg: [ 1.271389] ohci-platform: OHCI generic platform driver [ 1.271884] usbcore: registered new interface driver usb-storage [ 1.272440] mousedev: PS/2 mouse device common for all mice [ 1.273452] sun6i-rtc 7000000.rtc: registered as rtc0 [ 1.273485] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-01T00:00:04 UTC (4) [ 1.273599] sun6i-rtc 7000000.rtc: RTC enabled [ 1.273742] i2c_dev: i2c /dev entries driver [ 1.274541] sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.276070] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pm not found, using dummy regulator [ 1.276491] sdhci: Secure Digital Host Controller Interface driver [ 1.276500] sdhci: Copyright(c) Pierre Ossman [ 1.276524] Synopsys Designware Multimedia Card Interface Driver [ 1.277348] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.277525] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pl not found, using dummy regulator [ 1.278836] ledtrig-cpu: registered to indicate activity on CPUs [ 1.279412] sun8i-ce 1904000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.279723] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.279850] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.279963] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.280080] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.280162] sun8i-ce 1904000.crypto: Register cbc(aes) [ 1.280314] sun8i-ce 1904000.crypto: Register ecb(aes) [ 1.280452] sun8i-ce 1904000.crypto: Register cbc(des3_ede) [ 1.280568] sun8i-ce 1904000.crypto: Register ecb(des3_ede) [ 1.280687] sun8i-ce 1904000.crypto: Register md5 [ 1.280795] sun8i-ce 1904000.crypto: Register sha1 [ 1.280905] sun8i-ce 1904000.crypto: Register sha224 [ 1.281020] sun8i-ce 1904000.crypto: Register sha256 [ 1.281127] sun8i-ce 1904000.crypto: Register sha384 [ 1.281232] sun8i-ce 1904000.crypto: Register sha512 [ 1.281398] sun8i-ce 1904000.crypto: Register stdrng [ 1.282121] sun8i-ce 1904000.crypto: CryptoEngine Die ID 0 [ 1.282719] hid: raw HID events driver (C) Jiri Kosina [ 1.282852] usbcore: registered new interface driver usbhid [ 1.282859] usbhid: USB HID core driver [ 1.283588] random: crng init done [ 1.285840] NET: Registered PF_INET6 protocol family [ 1.870798] Freeing initrd memory: 12684K [ 1.899454] Segment Routing with IPv6 [ 1.899519] In-situ OAM (IOAM) with IPv6 [ 1.899604] NET: Registered PF_PACKET protocol family [ 1.899720] 8021q: 802.1Q VLAN Support v1.8 [ 1.899880] 9pnet: Installing 9P2000 support [ 1.899952] Key type dns_resolver registered [ 1.900422] registered taskstats version 1 [ 1.900443] Loading compiled-in X.509 certificates [ 1.904300] Loaded X.509 cert 'Build time autogenerated kernel key: 32330adefd2da02e444296fafd37464380789679' [ 1.907185] zswap: loaded using pool zstd/z3fold [ 1.907825] Key type ._fscrypt registered [ 1.907833] Key type .fscrypt registered [ 1.907837] Key type fscrypt-provisioning registered [ 1.908859] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no [ 1.922659] Key type encrypted registered [ 1.922691] AppArmor: AppArmor sha1 policy hashing enabled [ 1.922730] ima: No TPM chip found, activating TPM-bypass! [ 1.922775] ima: Allocated hash algorithm: sha1 [ 1.922808] ima: No architecture policies found [ 1.922878] evm: Initialising EVM extended attributes: [ 1.922883] evm: security.selinux [ 1.922888] evm: security.SMACK64 [ 1.922892] evm: security.SMACK64EXEC [ 1.922897] evm: security.SMACK64TRANSMUTE [ 1.922901] evm: security.SMACK64MMAP [ 1.922905] evm: security.apparmor [ 1.922909] evm: security.ima [ 1.922913] evm: security.capability [ 1.922917] evm: HMAC attrs: 0x1 [ 1.935969] platform 1100000.mixer: Fixing up cyclic dependency with 6510000.tcon-top [ 1.936305] sun8i-mixer 1100000.mixer: Adding to iommu group 0 [ 1.938389] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.938422] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 1.938574] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f064 hci version 0x100 quirks 0x0000000002010010 [ 1.938635] xhci-hcd xhci-hcd.1.auto: irq 43, io mem 0x05200000 [ 1.939086] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.939102] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.939113] usb usb1: Product: xHCI Host Controller [ 1.939122] usb usb1: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd [ 1.939130] usb usb1: SerialNumber: xhci-hcd.1.auto [ 1.939679] hub 1-0:1.0: USB hub found [ 1.939724] hub 1-0:1.0: 1 port detected [ 1.940079] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.940099] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 1.940117] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 1.940231] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.940397] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 1.940410] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.940420] usb usb2: Product: xHCI Host Controller [ 1.940428] usb usb2: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd [ 1.940436] usb usb2: SerialNumber: xhci-hcd.1.auto [ 1.940851] hub 2-0:1.0: USB hub found [ 1.940889] hub 2-0:1.0: 1 port detected [ 1.943532] sun50i_cpufreq_nvmem: Using CPU speed bin speed0 [ 1.945371] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version [ 1.951715] of_cfs_init [ 1.951850] of_cfs_init: OK [ 1.952183] ALSA device list: [ 1.952189] No soundcards found. [ 1.953328] Freeing unused kernel memory: 2496K [ 1.965392] Run /init as init process [ 1.965399] with arguments: [ 1.965405] /init [ 1.965410] with environment: [ 1.965415] HOME=/ [ 1.965419] TERM=linux [ 1.965424] ubootpart=ce3dfe46-01 [ 1.965430] cgroup_enable=memory [ 2.197360] usb 1-1: new full-speed USB device number 2 using xhci-hcd [ 2.352212] usb 1-1: New USB device found, idVendor=045e, idProduct=0745, bcdDevice= 6.33 [ 2.352245] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.352256] usb 1-1: Product: Microsoft® 2.4GHz Transceiver v7.0 [ 2.352264] usb 1-1: Manufacturer: Microsoft [ 2.371628] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:045E:0745.0001/input/input0 [ 2.397833] axp20x-i2c 0-0036: AXP20x variant AXP806 found [ 2.406456] input: axp20x-pek as /devices/platform/soc/7081400.i2c/i2c-0/0-0036/axp221-pek/input/input1 [ 2.430062] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input0 [ 2.434077] vdd-cpu: supplied by vcc-5v [ 2.439356] vdd-gpu: supplied by vcc-5v [ 2.440064] vdd-sys: Bringing 900000uV into 960000-960000uV [ 2.440498] vdd-sys: supplied by vcc-5v [ 2.441417] vcc-dram: supplied by vcc-5v [ 2.442291] vcc-pl-led-ir: supplied by vcc-5v [ 2.443422] vcc33-audio-tv-ephy-mac: Bringing 700000uV into 3300000-3300000uV [ 2.443821] vcc33-audio-tv-ephy-mac: supplied by vcc-5v [ 2.444503] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Mouse as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.1/0003:045E:0745.0002/input/input2 [ 2.444994] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.1/0003:045E:0745.0002/input/input3 [ 2.501752] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input1 [ 2.511185] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.2/0003:045E:0745.0003/input/input4 [ 2.550092] vcc33-io-pd-emmc-sd-usb-uart-1: Bringing 700000uV into 3300000-3300000uV [ 2.550453] vcc33-io-pd-emmc-sd-usb-uart-1: supplied by vcc-5v [ 2.551481] vcc18-dram-bias-pll: supplied by vcc-5v [ 2.552559] vcc-efuse-pcie-hdmi-pc: supplied by vcc-5v [ 2.553234] vcc-wifi-io-pm-pg: Bringing 700000uV into 1800000-1800000uV [ 2.553572] vcc-wifi-io-pm-pg: supplied by vcc-5v [ 2.554668] bldo4: supplied by vcc-5v [ 2.555185] vcc33-io-pd-emmc-sd-usb-uart-2: supplied by vcc-5v [ 2.555987] cldo2: supplied by vcc-5v [ 2.556633] cldo3: supplied by vcc-5v [ 2.556863] sw: supplied by regulator-dummy [ 2.557449] axp20x-i2c 0-0036: AXP20X driver loaded [ 2.570248] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 System Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.2/0003:045E:0745.0003/input/input6 [ 2.570764] hid-generic 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input2 [ 2.574626] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver [ 2.575152] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pb not found, using dummy regulator [ 2.576079] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator [ 2.581609] printk: console [ttyS0] disabled [ 2.581741] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 35, base_baud = 1500000) is a 16550A [ 2.581965] printk: console [ttyS0] enabled [ 2.583370] sun4i-drm display-engine: Adding to iommu group 0 [ 2.602997] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800008e16990) [ 2.603353] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800008e1abb8) [ 2.603765] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800008e11ba0) [ 2.603887] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator [ 2.604602] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY) [ 2.604931] sun8i-dw-hdmi 6000000.hdmi: EVENT=plugin [ 2.605461] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.610057] sun4i-drm display-engine: bound 6000000.hdmi (ops 0xffff800008e15cc8) [ 2.610881] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 [ 2.610942] sun8i-dw-hdmi 6000000.hdmi: read_hpd result: 1 [ 2.765113] Console: switching to colour frame buffer device 240x67 [ 2.814958] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device [ 2.839020] acx00-codec acx00-codec: DMA mask not set [ 2.842787] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator [ 2.844953] sunxi-mmc 4020000.mmc: Got CD GPIO [ 2.845563] vcc-wifi-io: supplied by vcc33-wifi [ 2.847905] ehci-platform 5101000.usb: EHCI Host Controller [ 2.847948] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 3 [ 2.848105] ehci-platform 5101000.usb: irq 41, io mem 0x05101000 [ 2.857343] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 2.861347] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00 [ 2.861683] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.861698] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.861709] usb usb3: Product: EHCI Host Controller [ 2.861717] usb usb3: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd [ 2.861726] usb usb3: SerialNumber: 5101000.usb [ 2.862270] hub 3-0:1.0: USB hub found [ 2.862312] hub 3-0:1.0: 1 port detected [ 2.863447] ehci-platform 5311000.usb: EHCI Host Controller [ 2.863501] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 4 [ 2.863651] ehci-platform 5311000.usb: irq 44, io mem 0x05311000 [ 2.869618] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 2.877334] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00 [ 2.877662] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.877677] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.877687] usb usb4: Product: EHCI Host Controller [ 2.877696] usb usb4: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd [ 2.877704] usb usb4: SerialNumber: 5311000.usb [ 2.878275] hub 4-0:1.0: USB hub found [ 2.878317] hub 4-0:1.0: 1 port detected [ 2.879527] ohci-platform 5101400.usb: Generic Platform OHCI controller [ 2.879591] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 5 [ 2.879731] ohci-platform 5101400.usb: irq 42, io mem 0x05101400 [ 2.904258] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.906028] mmc0: Problem switching card into high-speed mode! [ 2.906141] mmc0: new SDHC card at address 0001 [ 2.907012] mmcblk0: mmc0:0001 USD 29.8 GiB [ 2.909094] mmcblk0: p1 [ 2.941592] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 2.941618] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.941629] usb usb5: Product: Generic Platform OHCI controller [ 2.941637] usb usb5: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd [ 2.941646] usb usb5: SerialNumber: 5101400.usb [ 2.942382] hub 5-0:1.0: USB hub found [ 2.942478] hub 5-0:1.0: 1 port detected [ 2.943732] ohci-platform 5311400.usb: Generic Platform OHCI controller [ 2.943797] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 6 [ 2.943945] ohci-platform 5311400.usb: irq 45, io mem 0x05311400 [ 2.997466] mmc2: new HS200 MMC card at address 0001 [ 2.998519] mmcblk2: mmc2:0001 8GTF4R 7.28 GiB [ 3.000828] mmcblk2boot0: mmc2:0001 8GTF4R 4.00 MiB [ 3.002395] mmcblk2boot1: mmc2:0001 8GTF4R 4.00 MiB [ 3.005697] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 3.005727] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.005738] usb usb6: Product: Generic Platform OHCI controller [ 3.005746] usb usb6: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd [ 3.005755] usb usb6: SerialNumber: 5311400.usb [ 3.006413] hub 6-0:1.0: USB hub found [ 3.006468] hub 6-0:1.0: 1 port detected [ 3.007749] usb_phy_generic usb_phy_generic.4.auto: supply vcc not found, using dummy regulator [ 3.007972] usb_phy_generic usb_phy_generic.4.auto: dummy supplies not allowed for exclusive requests [ 3.109696] musb-hdrc musb-hdrc.5.auto: MUSB HDRC host driver [ 3.109741] musb-hdrc musb-hdrc.5.auto: new USB bus registered, assigned bus number 7 [ 3.110006] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 3.110022] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.110032] usb usb7: Product: MUSB HDRC host driver [ 3.110041] usb usb7: Manufacturer: Linux 5.15.48-sunxi64 musb-hcd [ 3.110049] usb usb7: SerialNumber: musb-hdrc.5.auto [ 3.110654] hub 7-0:1.0: USB hub found [ 3.110724] hub 7-0:1.0: 1 port detected [ 3.130721] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found [ 3.130747] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found [ 3.131045] dwmac-sun8i 5020000.ethernet: supply phy-io not found, using dummy regulator [ 3.131271] dwmac-sun8i 5020000.ethernet: PTP uses main clock [ 3.131313] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 50000) [ 3.237621] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported [ 3.237647] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported [ 3.237655] dwmac-sun8i 5020000.ethernet: COE Type 2 [ 3.237666] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported [ 3.237673] dwmac-sun8i 5020000.ethernet: Normal descriptors [ 3.237680] dwmac-sun8i 5020000.ethernet: Chain mode enabled [ 3.478371] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null). Quota mode: none. [ 3.673352] usb 5-1: new full-speed USB device number 2 using ohci-platform [ 3.910374] usb 5-1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10 [ 3.910404] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.910415] usb 5-1: Product: USB Receiver [ 3.910424] usb 5-1: Manufacturer: Logitech [ 3.919527] input: Logitech USB Receiver as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.0/0003:046D:C52B.0004/input/input7 [ 3.977996] hid-generic 0003:046D:C52B.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-5101400.usb-1/input0 [ 3.984266] input: Logitech USB Receiver Mouse as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input8 [ 3.984724] input: Logitech USB Receiver Consumer Control as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input9 [ 4.041716] input: Logitech USB Receiver System Control as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input10 [ 4.042095] hid-generic 0003:046D:C52B.0005: input,hiddev97,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-5101400.usb-1/input1 [ 4.046730] hid-generic 0003:046D:C52B.0006: hiddev98,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-5101400.usb-1/input2 [ 4.781944] systemd[1]: System time before build time, advancing clock. [ 4.870091] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq [ 4.879064] systemd[1]: systemd 249.11-0ubuntu3.1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 4.879739] systemd[1]: Detected architecture arm64. [ 4.883086] systemd[1]: Hostname set to <orangepi3-lts>. [ 5.105388] sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 5.122726] mmc1: new high speed SDIO card at address 8800 [ 6.193555] systemd[1]: Queued start job for default target Graphical Interface. [ 6.199452] systemd[1]: Created slice Slice /system/modprobe. [ 6.202231] systemd[1]: Created slice Slice /system/serial-getty. [ 6.204080] systemd[1]: Created slice User and Session Slice. [ 6.204943] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.206453] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.207405] systemd[1]: Reached target Remote File Systems. [ 6.207760] systemd[1]: Reached target Slice Units. [ 6.208108] systemd[1]: Reached target Swaps. [ 6.208409] systemd[1]: Reached target System Time Set. [ 6.208987] systemd[1]: Reached target Local Verity Protected Volumes. [ 6.210061] systemd[1]: Listening on Syslog Socket. [ 6.210934] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.211571] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.212959] systemd[1]: Listening on Journal Audit Socket. [ 6.213968] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.215050] systemd[1]: Listening on Journal Socket. [ 6.226846] systemd[1]: Listening on udev Control Socket. [ 6.227964] systemd[1]: Listening on udev Kernel Socket. [ 6.232507] systemd[1]: Mounting Huge Pages File System... [ 6.237816] systemd[1]: Mounting POSIX Message Queue File System... [ 6.243581] systemd[1]: Mounting Kernel Debug File System... [ 6.244898] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 6.252149] systemd[1]: Starting Restore / save the current clock... [ 6.257902] systemd[1]: Starting Set the console keyboard layout... [ 6.264301] systemd[1]: Starting Create List of Static Device Nodes... [ 6.270918] systemd[1]: Starting Load Kernel Module configfs... [ 6.277786] systemd[1]: Starting Load Kernel Module drm... [ 6.284675] systemd[1]: Starting Load Kernel Module fuse... [ 6.292060] systemd[1]: Started Nameserver information manager. [ 6.293725] systemd[1]: Reached target Preparation for Network. [ 6.294932] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 6.306924] systemd[1]: Starting Load Kernel Modules... [ 6.312706] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.318432] systemd[1]: Starting Coldplug All udev Devices... [ 6.328490] systemd[1]: Mounted Huge Pages File System. [ 6.329589] fuse: init (API version 7.34) [ 6.330211] systemd[1]: Mounted POSIX Message Queue File System. [ 6.331670] systemd[1]: Mounted Kernel Debug File System. [ 6.334979] systemd[1]: Finished Restore / save the current clock. [ 6.338419] systemd[1]: Finished Create List of Static Device Nodes. [ 6.340843] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 6.342500] systemd[1]: Finished Load Kernel Module configfs. [ 6.344775] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 6.346521] systemd[1]: Finished Load Kernel Module drm. [ 6.348776] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 6.350118] systemd[1]: Finished Load Kernel Module fuse. [ 6.357102] systemd[1]: Mounting FUSE Control File System... [ 6.363222] systemd[1]: Mounting Kernel Configuration File System... [ 6.371020] systemd[1]: Mounted FUSE Control File System. [ 6.374967] systemd[1]: Mounted Kernel Configuration File System. [ 6.387839] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none. [ 6.393209] systemd[1]: Finished Remount Root and Kernel File Systems. [ 6.394291] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 6.398918] systemd[1]: Starting Load/Save Random Seed... [ 6.404754] systemd[1]: Starting Create System Users... [ 6.605011] WCN: marlin_init entry! [ 6.605666] WCN: wcn config bt wake host [ 6.605940] WCN_ERR: dts node for bt_wake not found [ 6.605943] WCN: marlin2 parse_dt some para not config [ 6.605957] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 [ 6.613551] sdiohal:sdiohal_init ok [ 6.614342] WCN: marlin_probe ok! [ 6.615383] systemd[1]: Finished Load/Save Random Seed. [ 6.616503] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 6.629638] mtty_probe init device addr: 0x00000000e4ddf53f [ 6.629847] -->rfkill_bluetooth_init [ 6.629985] bluetooth_set_power: start_block=1 [ 6.629996] WCN: marlin power state:0, subsys: [MARLIN_BLUETOOTH] power 0 [ 6.630006] bluetooth_set_power: end_block=1 [ 6.630024] <--rfkill_bluetooth_init [ 6.642377] systemd[1]: Finished Create System Users. [ 6.648577] systemd[1]: Starting Create Static Device Nodes in /dev... [ 6.718136] systemd[1]: Finished Set the console keyboard layout. [ 6.724088] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.725783] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.746999] [ADDR_MGT] addr_mgt_probe: module version: v1.0.9 [ 6.747155] [ADDR_MGT] addr_mgt_probe: success. [ 6.812225] WCN: start_marlin [MARLIN_WIFI] [ 6.812252] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 [ 6.812260] WCN: the first power on start [ 6.818045] systemd[1]: Finished Create Static Device Nodes in /dev. [ 6.825520] systemd[1]: Reached target Preparation for Local File Systems. [ 6.837722] systemd[1]: Mounting /tmp... [ 6.851964] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 6.862991] systemd[1]: Mounted /tmp. [ 6.870324] systemd[1]: Reached target Local File Systems. [ 6.882576] systemd[1]: Starting Armbian leds state... [ 6.895047] systemd[1]: Starting Armbian ZRAM config... [ 6.907291] systemd[1]: Starting Set console font and keymap... [ 6.917410] WCN: marlin chip en dummy pull up -- need manually set GPIO [ 6.919805] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... [ 6.943858] systemd[1]: Starting Set Up Additional Binary Formats... [ 6.945374] sdiohal:sdiohal_scan_card [ 6.945565] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=50000000 [ 6.945658] WCN: marlin_scan_finish! [ 6.945663] sdiohal:probe ok [ 6.945774] sdiohal:scan end! [ 6.945780] WCN: then marlin start to download [ 6.946019] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 [ 6.946032] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! [ 6.952293] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 6.952618] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 6.955861] systemd[1]: Finished Set console font and keymap. [ 6.968835] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 362 (systemd-binfmt) [ 6.974598] systemd[1]: Mounting Arbitrary Executable File Formats File System... [ 6.993966] systemd[1]: Finished Coldplug All udev Devices. [ 7.002822] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data. [ 7.098961] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 7.109231] systemd[1]: Mounted Arbitrary Executable File Formats File System. [ 7.132532] systemd[1]: Finished Set Up Additional Binary Formats. [ 7.160398] systemd[1]: Finished Helper to synchronize boot up for ifupdown. [ 7.209436] systemd[1]: Finished Armbian leds state. [ 7.513983] systemd[1]: Started Rule-based Manager for Device Events and Files. [ 7.521754] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 7.522417] systemd[1]: Started Dispatch Password Requests to Console Directory Watch when bootsplash is active. [ 7.533479] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 7.533648] systemd[1]: Reached target Local Encrypted Volumes. [ 7.575897] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 7.627231] systemd[1]: Starting Load/Save RF Kill Switch Status... [ 7.777051] systemd[1]: Started Load/Save RF Kill Switch Status. [ 7.954890] systemd[1]: Found device /dev/ttyS0. [ 8.014195] panfrost 1800000.gpu: clock rate = 432000000 [ 8.014230] panfrost 1800000.gpu: bus_clock rate = 100000000 [ 8.014548] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0 [ 8.014559] panfrost 1800000.gpu: features: 00000000,10309e40, issues: 00000000,21054400 [ 8.014566] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7 [ 8.014573] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1 [ 8.014613] WCN: combin_img 0 marlin_firmware_write finish and successful [ 8.014901] WCN: marlin_start_run read reset reg val:0x1 [ 8.014906] WCN: after do marlin_start_run reset reg val:0x0 [ 8.015080] WCN: s_marlin_bootup_time=8015079802 [ 8.015466] [drm] Initialized panfrost 1.2.0 20180908 for 1800000.gpu on minor 1 [ 8.021616] WCN: clock mode: TSX [ 8.021814] WCN: marlin_write_cali_data sync init_state:0x91036042 [ 8.049599] WCN: marlin_write_cali_data sync init_state:0x91036042 [ 8.068392] mc: Linux media interface: v0.10 [ 8.077689] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1 [ 8.077720] WCN: sdio_config bt_wake_host trigger:[high] [ 8.077723] WCN: sdio_config irq:[inband] [ 8.077725] WCN: sdio_config wake_host_level_duration_time:[20ms] [ 8.077731] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse] [ 8.077733] WCN: marlin_send_sdio_config_to_cp sdio_config:0x80f01 (enable config) [ 8.078060] WCN: marlin_write_cali_data finish [ 8.078227] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.105573] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.137562] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.165584] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.184903] videodev: Linux video capture interface: v2.00 [ 8.193587] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0 [ 8.193612] WCN: marlin_bind_verify confuse data: 0x33fea07bef5424afb3eb92a5307b8c0e [ 8.193627] WCN: marlin_bind_verify verify data: 0xbe88975721254815cb97ad470d21e601 [ 8.194121] WCN: check_cp_ready sync val:0xf0f0f0f7, prj_type val:0x0 [ 8.221621] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0 [ 8.221645] sdiohal:sdiohal_runtime_get entry [ 8.224117] WCN: get_cp2_version entry! [ 8.268773] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~ [ 8.268824] WCN: switch_cp2_log - close entry! [ 8.270121] WCN: WCND at cmd read:OK [ 8.270208] WCN: then marlin download finished and run ok [ 8.270214] WCN: start_loopcheck [ 8.288538] WCN: get_board_ant_num [one_ant] [ 8.288563] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini [ 8.357396] Registered IR keymap rc-empty [ 8.357535] rc rc0: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0 [ 8.358087] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter [ 8.358296] input: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0/input12 [ 8.358715] sunxi-ir 7040000.ir: initialized sunXi IR driver [ 8.379249] zram: Added device: zram0 [ 8.379675] zram: Added device: zram1 [ 8.380117] zram: Added device: zram2 [ 8.410616] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings. [ 8.416810] systemd[1]: Finished Load Kernel Modules. [ 8.425572] systemd[1]: Starting Apply Kernel Variables... [ 8.502238] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned. [ 8.503493] cedrus 1c0e000.video-codec: Adding to iommu group 0 [ 8.509361] cedrus 1c0e000.video-codec: Device registered as /dev/video0 [ 8.569078] systemd[1]: Finished Apply Kernel Variables. [ 8.615426] zram0: detected capacity change from 0 to 2037304 [ 8.633094] systemd[1]: Starting Raise network interfaces... [ 8.650146] Adding 1018648k swap on /dev/zram0. Priority:5 extents:1 across:1018648k SSFS [ 8.824826] logitech-djreceiver 0003:046D:C52B.0006: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-5101400.usb-1/input2 [ 8.894117] zram1: detected capacity change from 0 to 102400 [ 8.958383] input: Logitech Wireless Device PID:4004 Keyboard as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.2/0003:046D:C52B.0006/0003:046D:4004.0007/input/input13 [ 9.009858] hid-generic 0003:046D:4004.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4004] on usb-5101400.usb-1/input2:1 [ 9.036255] systemd[1]: Finished Armbian ZRAM config. [ 9.044253] systemd[1]: Starting Armbian memory supported logging... [ 9.171018] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard. Quota mode: none. [ 9.198787] input: Logitech K360 as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.2/0003:046D:C52B.0006/0003:046D:4004.0007/input/input17 [ 9.199362] logitech-hidpp-device 0003:046D:4004.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K360] on usb-5101400.usb-1/input2:1 [ 9.697942] systemd[1]: Finished Raise network interfaces. [ 9.704493] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 9.704773] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 9.705128] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 9.710522] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 9.710654] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 9.710772] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 9.710855] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 9.857115] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 9.857354] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 9.857432] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 9.857521] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 9.857622] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 9.857735] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 11.391375] systemd[1]: Finished Armbian memory supported logging. [ 11.400571] systemd[1]: Starting Journal Service... [ 11.544107] systemd[1]: Started Journal Service. [ 11.573374] systemd-journald[677]: Received client request to flush runtime journal. ### armbian-release: # PLEASE DO NOT EDIT THIS FILE BOARD=orangepi3-lts BOARD_NAME="Orange Pi 3 LTS" BOARDFAMILY=sun50iw6 BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=13f5fba13c VERSION=22.05.3 LINUXFAMILY=sunxi64 ARCH=arm64 IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=stable ### boot environment: verbosity=1 bootlogo=false console=both disp_mode=1920x1080p60 overlay_prefix=sun50i-h6 rootdev=UUID=71b44a6c-5bb8-4352-afe7-d22b8e62de4c rootfstype=ext4 ### lsusb: Thu Jun 23 03:13:46 AM UTC 2022 | Orange Pi 3 LTS | 22.05.3 | arm64 | aarch64 | 5.15.48-sunxi64 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ### lscpu: Architecture: aarch64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Vendor ID: ARM Model name: Cortex-A53 Model: 4 Thread(s) per core: 1 Core(s) per cluster: 4 Socket(s): - Cluster(s): 1 Stepping: r0p4 CPU max MHz: 1800.0000 CPU min MHz: 480.0000 BogoMIPS: 48.00 Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid NUMA node(s): 1 NUMA node0 CPU(s): 0-3 Vulnerability Itlb multihit: Not affected Vulnerability L1tf: Not affected Vulnerability Mds: Not affected Vulnerability Meltdown: Not affected Vulnerability Mmio stale data: Not affected Vulnerability Spec store bypass: Not affected Vulnerability Spectre v1: Mitigation; __user pointer sanitization Vulnerability Spectre v2: Not affected Vulnerability Srbds: Not affected Vulnerability Tsx async abort: Not affected ### cpuinfo: processor : 0 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 1 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 2 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 3 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 ### meminfo: MemTotal: 2037300 kB MemFree: 1849616 kB MemAvailable: 1851652 kB Buffers: 11672 kB Cached: 50624 kB SwapCached: 0 kB Active: 31520 kB Inactive: 51264 kB Active(anon): 444 kB Inactive(anon): 23568 kB Active(file): 31076 kB Inactive(file): 27696 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 1018648 kB SwapFree: 1018648 kB Dirty: 1676 kB Writeback: 0 kB AnonPages: 20500 kB Mapped: 16968 kB Shmem: 3392 kB KReclaimable: 10432 kB Slab: 45848 kB SReclaimable: 10432 kB SUnreclaim: 35416 kB KernelStack: 2512 kB PageTables: 1688 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2037296 kB Committed_AS: 43924 kB VmallocTotal: 133143592960 kB VmallocUsed: 22764 kB VmallocChunk: 0 kB Percpu: 976 kB AnonHugePages: 0 kB ShmemHugePages: 0 kB ShmemPmdMapped: 0 kB FileHugePages: 0 kB FilePmdMapped: 0 kB CmaTotal: 131072 kB CmaFree: 128768 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB Hugetlb: 0 kB ### virtual memory: vm.admin_reserve_kbytes = 8192 vm.compaction_proactiveness = 20 vm.compact_unevictable_allowed = 1 vm.dirty_background_bytes = 0 vm.dirty_background_ratio = 10 vm.dirty_bytes = 0 vm.dirty_expire_centisecs = 3000 vm.dirty_ratio = 20 vm.dirtytime_expire_seconds = 43200 vm.dirty_writeback_centisecs = 500 vm.extfrag_threshold = 500 vm.hugetlb_shm_group = 0 vm.laptop_mode = 0 vm.legacy_va_layout = 0 vm.lowmem_reserve_ratio = 256 256 32 0 vm.max_map_count = 65530 vm.min_free_kbytes = 22528 vm.min_slab_ratio = 5 vm.min_unmapped_ratio = 1 vm.mmap_min_addr = 32768 vm.mmap_rnd_bits = 18 vm.mmap_rnd_compat_bits = 11 vm.nr_hugepages = 0 vm.nr_hugepages_mempolicy = 0 vm.nr_overcommit_hugepages = 0 vm.numa_stat = 1 vm.numa_zonelist_order = Node vm.oom_dump_tasks = 1 vm.oom_kill_allocating_task = 0 vm.overcommit_kbytes = 0 vm.overcommit_memory = 0 vm.overcommit_ratio = 50 vm.page-cluster = 0 vm.page_lock_unfairness = 5 vm.panic_on_oom = 0 vm.percpu_pagelist_high_fraction = 0 vm.stat_interval = 1 vm.swappiness = 100 vm.user_reserve_kbytes = 63009 vm.vfs_cache_pressure = 100 vm.watermark_boost_factor = 15000 vm.watermark_scale_factor = 10 vm.zone_reclaim_mode = 0 ### ip addr: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 02:07:29:30:86:8c brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:32:c3:9f:6a:08 brd ff:ff:ff:ff:ff:ff ### partitions: major minor #blocks name 179 0 31205376 mmcblk0 179 1 6500352 mmcblk0p1 179 32 7634944 mmcblk2 252 0 1018652 zram0 252 1 51200 zram1 ### df: tmpfs 199M 3.4M 196M 2% /run /dev/mmcblk0p1 6.0G 4.9G 1.1G 83% / tmpfs 995M 0 995M 0% /dev/shm tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 995M 0 995M 0% /tmp /dev/zram1 47M 1.6M 42M 4% /var/log ### lsblk: NAME FSTYPE SIZE MOUNTPOINT UUID mmcblk0 29.8G └─mmcblk0p1 ext4 6.2G / 71b44a6c-5bb8-4352-afe7-d22b8e62de4c mmcblk2 swap 7.3G 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 mmcblk2boot0 swap 4M 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 mmcblk2boot1 swap 4M 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 zram1 50M /var/log zram2 0B ### zramctl: NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram1 zstd 50M 68K 728B 44K 4 /var/log /dev/zram0 lzo-rle 994.8M 4K 74B 12K 4 [SWAP] ### mtab: /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 ### [resize2fs] Leaving 1% spare area. Start resizing partition /dev/mmcblk0p1 now: major minor #blocks name 179 0 31205376 mmcblk0 179 1 6500352 mmcblk0p1 179 32 7634944 mmcblk2 252 0 1018652 zram0 252 1 51200 zram1 Executing fdisk, fsck and partprobe: Welcome to fdisk (util-linux 2.37.2). Changes will remain in memory only, until you decide to write them. Be careful before using the write command. This disk is currently in use - repartitioning is probably a bad idea. It's recommended to umount all file systems, and swapoff all swap partitions on this disk. Command (m for help): Selected partition 1 Partition 1 has been deleted. Command (m for help): Partition type p primary (0 primary, 0 extended, 4 free) e extended (container for logical partitions) Select (default p): Partition number (1-4, default 1): First sector (2048-62410751, default 2048): Last sector, +/-sectors or +/-size{K,M,G,T,P} (8192-62410751, default 62410751): Created a new partition 1 of type 'Linux' and of size 29.4 GiB. Partition #1 contains a ext4 signature. Command (m for help): ### mmc0:0001 info: fwrev: 0x0 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=USD MODALIAS=mmc:block cid: 1d414455534400001000005ae0016181 rca: 0x0001 csd: 400e00325b590000ee137f800a40004d manfid: 0x00001d ocr: 0x00200000 preferred_erase_size: 4194304 type: SD hwrev: 0x1 date: 01/2022 dsr: 0x404 The partition table has been altered. Syncing disks. erase_size: 512 oemid: 0x4144 serial: 0x00005ae0 ssr: 000000000500000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 scr: 02b5808200000000 name: USD ### mmc2:0001 info: fwrev: 0x0600000000000000 uevent: DRIVER=mmcblk MMC_TYPE=MMC MMC_NAME=8GTF4R MODALIAS=mmc:block New partition table: cid: 15010038475446345206d410e21fc801 major minor #blocks name 179 0 31205376 mmcblk0 179 1 30879744 mmcblk0p1 179 32 7634944 mmcblk2 252 0 1018652 zram0 252 1 51200 zram1 Now trying to resize ext4 filesystem on /dev/mmcblk0p1 to the limits: rel_sectors: 0x1 resize2fs 1.46.5 (30-Dec-2021) enhanced_rpmb_supported: 0x1 rca: 0x0001 pre_eol_info: 0x01 csd: d02701320f5903fff6dbffef8e40400d manfid: 0x000015 ocr: 0x00200000 preferred_erase_size: 4194304 enhanced_area_offset: 18446744073709551594 raw_rpmb_size_mult: 0x4 type: MMC hwrev: 0x0 date: 12/2021 prv: 0x6 ffu_capable: 1 dsr: 0x404 erase_size: 524288 life_time: 0x01 0x01 enhanced_area_size: 4294967274 oemid: 0x0100 serial: 0xd410e21f cmdq_en: 0 rev: 0x8 name: 8GTF4R ### Boot system health: Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 03:13:49: 1080MHz 1.34 51% 19% 13% 0% 18% 0% 49.3°C 0/9 03:13:50: 1080MHz 1.71 53% 7% 3% 0% 42% 0% 48.5°C 0/9 03:13:50: 1488MHz 1.71 35% 9% 2% 0% 22% 0% 48.7°C 0/9 03:13:50: 1080MHz 1.71 32% 8% 2% 0% 20% 0% 48.7°C 0/9 03:13:51: 1080MHz 1.71 35% 8% 4% 1% 21% 0% 49.1°C 0/9 Filesystem at /dev/mmcblk0p1 is mounted on /; on-line resizing required old_desc_blocks = 1, new_desc_blocks = 2 The filesystem on /dev/mmcblk0p1 is now 7719936 (4k) blocks long. ### [resize2fs] Start resizing ext4 partition /dev/mmcblk0p1 now resize2fs 1.46.5 (30-Dec-2021) The filesystem is already 7719936 (4k) blocks long. Nothing to do! ### quick iozone test: 4 144 824 6811 6817 6446 2242 ### [firstrun] Recreated SSH keys (entropy: 256 256) ### Activated 1 lzo-rle zram swap devices with 994MB each. ### Activated Armbian ramlog partition with zstd compression Thu Jun 23 11:40:42 AM CST 2022 | Orange Pi 3 LTS | 22.05.3 | arm64 | aarch64 | 5.15.48-sunxi64 ### dmesg: [ 1.272840] i2c_dev: i2c /dev entries driver [ 1.273687] sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.275263] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pm not found, using dummy regulator [ 1.275681] sdhci: Secure Digital Host Controller Interface driver [ 1.275689] sdhci: Copyright(c) Pierre Ossman [ 1.275714] Synopsys Designware Multimedia Card Interface Driver [ 1.276505] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.276668] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pl not found, using dummy regulator [ 1.277837] ledtrig-cpu: registered to indicate activity on CPUs [ 1.278440] sun8i-ce 1904000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.278705] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.278843] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.278941] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.279034] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.279118] sun8i-ce 1904000.crypto: Register cbc(aes) [ 1.279270] sun8i-ce 1904000.crypto: Register ecb(aes) [ 1.279382] sun8i-ce 1904000.crypto: Register cbc(des3_ede) [ 1.279491] sun8i-ce 1904000.crypto: Register ecb(des3_ede) [ 1.279598] sun8i-ce 1904000.crypto: Register md5 [ 1.279710] sun8i-ce 1904000.crypto: Register sha1 [ 1.279822] sun8i-ce 1904000.crypto: Register sha224 [ 1.279933] sun8i-ce 1904000.crypto: Register sha256 [ 1.280039] sun8i-ce 1904000.crypto: Register sha384 [ 1.280147] sun8i-ce 1904000.crypto: Register sha512 [ 1.280254] sun8i-ce 1904000.crypto: Register stdrng [ 1.280979] sun8i-ce 1904000.crypto: CryptoEngine Die ID 0 [ 1.281617] hid: raw HID events driver (C) Jiri Kosina [ 1.281760] usbcore: registered new interface driver usbhid [ 1.281768] usbhid: USB HID core driver [ 1.282505] random: crng init done [ 1.284692] NET: Registered PF_INET6 protocol family [ 1.870669] Freeing initrd memory: 12684K [ 1.899337] Segment Routing with IPv6 [ 1.899410] In-situ OAM (IOAM) with IPv6 [ 1.899505] NET: Registered PF_PACKET protocol family [ 1.899615] 8021q: 802.1Q VLAN Support v1.8 [ 1.899772] 9pnet: Installing 9P2000 support [ 1.899846] Key type dns_resolver registered [ 1.900287] registered taskstats version 1 [ 1.900304] Loading compiled-in X.509 certificates [ 1.904160] Loaded X.509 cert 'Build time autogenerated kernel key: 32330adefd2da02e444296fafd37464380789679' [ 1.907062] zswap: loaded using pool zstd/z3fold [ 1.907708] Key type ._fscrypt registered [ 1.907716] Key type .fscrypt registered [ 1.907721] Key type fscrypt-provisioning registered [ 1.908736] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no [ 1.922610] Key type encrypted registered [ 1.922643] AppArmor: AppArmor sha1 policy hashing enabled [ 1.922683] ima: No TPM chip found, activating TPM-bypass! [ 1.922711] ima: Allocated hash algorithm: sha1 [ 1.922743] ima: No architecture policies found [ 1.922791] evm: Initialising EVM extended attributes: [ 1.922796] evm: security.selinux [ 1.922800] evm: security.SMACK64 [ 1.922805] evm: security.SMACK64EXEC [ 1.922809] evm: security.SMACK64TRANSMUTE [ 1.922813] evm: security.SMACK64MMAP [ 1.922818] evm: security.apparmor [ 1.922822] evm: security.ima [ 1.922826] evm: security.capability [ 1.922830] evm: HMAC attrs: 0x1 [ 1.935894] platform 1100000.mixer: Fixing up cyclic dependency with 6510000.tcon-top [ 1.936246] sun8i-mixer 1100000.mixer: Adding to iommu group 0 [ 1.938307] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.938338] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 1.938483] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f064 hci version 0x100 quirks 0x0000000002010010 [ 1.938551] xhci-hcd xhci-hcd.1.auto: irq 43, io mem 0x05200000 [ 1.939042] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.939058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.939069] usb usb1: Product: xHCI Host Controller [ 1.939077] usb usb1: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd [ 1.939086] usb usb1: SerialNumber: xhci-hcd.1.auto [ 1.939617] hub 1-0:1.0: USB hub found [ 1.939666] hub 1-0:1.0: 1 port detected [ 1.940002] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.940022] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 1.940045] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 1.940139] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.940297] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 1.940310] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.940321] usb usb2: Product: xHCI Host Controller [ 1.940329] usb usb2: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd [ 1.940337] usb usb2: SerialNumber: xhci-hcd.1.auto [ 1.940741] hub 2-0:1.0: USB hub found [ 1.940778] hub 2-0:1.0: 1 port detected [ 1.943495] sun50i_cpufreq_nvmem: Using CPU speed bin speed0 [ 1.945277] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version [ 1.951649] of_cfs_init [ 1.951764] of_cfs_init: OK [ 1.952094] ALSA device list: [ 1.952101] No soundcards found. [ 1.953207] Freeing unused kernel memory: 2496K [ 1.977591] Run /init as init process [ 1.977600] with arguments: [ 1.977606] /init [ 1.977612] with environment: [ 1.977616] HOME=/ [ 1.977621] TERM=linux [ 1.977626] ubootpart=ce3dfe46-01 [ 1.977631] cgroup_enable=memory [ 2.193555] usb 1-1: new full-speed USB device number 2 using xhci-hcd [ 2.359296] usb 1-1: New USB device found, idVendor=045e, idProduct=0745, bcdDevice= 6.33 [ 2.359334] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.359345] usb 1-1: Product: Microsoft® 2.4GHz Transceiver v7.0 [ 2.359353] usb 1-1: Manufacturer: Microsoft [ 2.380572] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:045E:0745.0001/input/input0 [ 2.405951] axp20x-i2c 0-0036: AXP20x variant AXP806 found [ 2.416250] input: axp20x-pek as /devices/platform/soc/7081400.i2c/i2c-0/0-0036/axp221-pek/input/input1 [ 2.440095] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input0 [ 2.444209] vdd-cpu: supplied by vcc-5v [ 2.445995] vdd-gpu: supplied by vcc-5v [ 2.446737] vdd-sys: Bringing 900000uV into 960000-960000uV [ 2.447163] vdd-sys: supplied by vcc-5v [ 2.448220] vcc-dram: supplied by vcc-5v [ 2.449137] vcc-pl-led-ir: supplied by vcc-5v [ 2.450174] vcc33-audio-tv-ephy-mac: Bringing 700000uV into 3300000-3300000uV [ 2.450587] vcc33-audio-tv-ephy-mac: supplied by vcc-5v [ 2.457417] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Mouse as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.1/0003:045E:0745.0002/input/input2 [ 2.458172] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.1/0003:045E:0745.0002/input/input3 [ 2.517969] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input1 [ 2.530047] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.2/0003:045E:0745.0003/input/input4 [ 2.558277] vcc33-io-pd-emmc-sd-usb-uart-1: Bringing 700000uV into 3300000-3300000uV [ 2.558638] vcc33-io-pd-emmc-sd-usb-uart-1: supplied by vcc-5v [ 2.559627] vcc18-dram-bias-pll: supplied by vcc-5v [ 2.560734] vcc-efuse-pcie-hdmi-pc: supplied by vcc-5v [ 2.561386] vcc-wifi-io-pm-pg: Bringing 700000uV into 1800000-1800000uV [ 2.561719] vcc-wifi-io-pm-pg: supplied by vcc-5v [ 2.562819] bldo4: supplied by vcc-5v [ 2.563341] vcc33-io-pd-emmc-sd-usb-uart-2: supplied by vcc-5v [ 2.564136] cldo2: supplied by vcc-5v [ 2.564801] cldo3: supplied by vcc-5v [ 2.565035] sw: supplied by regulator-dummy [ 2.565598] axp20x-i2c 0-0036: AXP20X driver loaded [ 2.579120] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver [ 2.579642] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pb not found, using dummy regulator [ 2.580524] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator [ 2.581205] printk: console [ttyS0] disabled [ 2.581316] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 35, base_baud = 1500000) is a 16550A [ 2.581600] printk: console [ttyS0] enabled [ 2.582895] sun4i-drm display-engine: Adding to iommu group 0 [ 2.589957] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 System Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.2/0003:045E:0745.0003/input/input6 [ 2.590397] hid-generic 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input2 [ 2.602524] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800008e16990) [ 2.602880] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800008e1abb8) [ 2.603276] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800008e11ba0) [ 2.603403] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator [ 2.603905] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY) [ 2.604269] sun8i-dw-hdmi 6000000.hdmi: EVENT=plugin [ 2.608442] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.608956] sun4i-drm display-engine: bound 6000000.hdmi (ops 0xffff800008e15cc8) [ 2.609998] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 [ 2.610059] sun8i-dw-hdmi 6000000.hdmi: read_hpd result: 1 [ 2.766758] Console: switching to colour frame buffer device 240x67 [ 2.816582] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device [ 2.837317] acx00-codec acx00-codec: DMA mask not set [ 2.841040] vcc-wifi-io: supplied by vcc33-wifi [ 2.841454] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator [ 2.842711] sunxi-mmc 4020000.mmc: Got CD GPIO [ 2.846375] ehci-platform 5101000.usb: EHCI Host Controller [ 2.846421] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 3 [ 2.846575] ehci-platform 5101000.usb: irq 41, io mem 0x05101000 [ 2.848622] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq [ 2.865562] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00 [ 2.865575] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 2.865860] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 2.865911] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.865925] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.865936] usb usb3: Product: EHCI Host Controller [ 2.865945] usb usb3: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd [ 2.865953] usb usb3: SerialNumber: 5101000.usb [ 2.866566] hub 3-0:1.0: USB hub found [ 2.866635] hub 3-0:1.0: 1 port detected [ 2.867969] ehci-platform 5311000.usb: EHCI Host Controller [ 2.868052] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 4 [ 2.868209] ehci-platform 5311000.usb: irq 44, io mem 0x05311000 [ 2.881527] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00 [ 2.881876] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.881891] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.881901] usb usb4: Product: EHCI Host Controller [ 2.881914] usb usb4: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd [ 2.881923] usb usb4: SerialNumber: 5311000.usb [ 2.882497] hub 4-0:1.0: USB hub found [ 2.882543] hub 4-0:1.0: 1 port detected [ 2.883659] ohci-platform 5101400.usb: Generic Platform OHCI controller [ 2.883696] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 5 [ 2.883846] ohci-platform 5101400.usb: irq 42, io mem 0x05101400 [ 2.901121] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.902890] mmc0: Problem switching card into high-speed mode! [ 2.903010] mmc0: new SDHC card at address 0001 [ 2.903892] mmcblk0: mmc0:0001 USD 29.8 GiB [ 2.905998] mmcblk0: p1 [ 2.945815] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 2.945843] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.945853] usb usb5: Product: Generic Platform OHCI controller [ 2.945862] usb usb5: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd [ 2.945870] usb usb5: SerialNumber: 5101400.usb [ 2.946508] hub 5-0:1.0: USB hub found [ 2.946564] hub 5-0:1.0: 1 port detected [ 2.947693] ohci-platform 5311400.usb: Generic Platform OHCI controller [ 2.947732] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 6 [ 2.947873] ohci-platform 5311400.usb: irq 45, io mem 0x05311400 [ 3.005682] mmc2: new HS200 MMC card at address 0001 [ 3.006689] mmcblk2: mmc2:0001 8GTF4R 7.28 GiB [ 3.009191] mmcblk2boot0: mmc2:0001 8GTF4R 4.00 MiB [ 3.009899] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 3.009929] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.009940] usb usb6: Product: Generic Platform OHCI controller [ 3.009949] usb usb6: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd [ 3.009957] usb usb6: SerialNumber: 5311400.usb [ 3.010742] hub 6-0:1.0: USB hub found [ 3.010820] hub 6-0:1.0: 1 port detected [ 3.011003] mmcblk2boot1: mmc2:0001 8GTF4R 4.00 MiB [ 3.012287] usb_phy_generic usb_phy_generic.4.auto: supply vcc not found, using dummy regulator [ 3.012471] usb_phy_generic usb_phy_generic.4.auto: dummy supplies not allowed for exclusive requests [ 3.078113] sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 3.095714] mmc1: new high speed SDIO card at address 8800 [ 3.109911] musb-hdrc musb-hdrc.5.auto: MUSB HDRC host driver [ 3.109956] musb-hdrc musb-hdrc.5.auto: new USB bus registered, assigned bus number 7 [ 3.110288] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 3.110305] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.110316] usb usb7: Product: MUSB HDRC host driver [ 3.110324] usb usb7: Manufacturer: Linux 5.15.48-sunxi64 musb-hcd [ 3.110333] usb usb7: SerialNumber: musb-hdrc.5.auto [ 3.110923] hub 7-0:1.0: USB hub found [ 3.110989] hub 7-0:1.0: 1 port detected [ 3.127115] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found [ 3.127143] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found [ 3.127455] dwmac-sun8i 5020000.ethernet: supply phy-io not found, using dummy regulator [ 3.127695] dwmac-sun8i 5020000.ethernet: PTP uses main clock [ 3.127740] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 50000) [ 3.233767] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported [ 3.233793] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported [ 3.233800] dwmac-sun8i 5020000.ethernet: COE Type 2 [ 3.233809] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported [ 3.233817] dwmac-sun8i 5020000.ethernet: Normal descriptors [ 3.233824] dwmac-sun8i 5020000.ethernet: Chain mode enabled [ 3.470451] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null). Quota mode: none. [ 3.693548] usb 5-1: new full-speed USB device number 2 using ohci-platform [ 3.934574] usb 5-1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10 [ 3.934605] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.934616] usb 5-1: Product: USB Receiver [ 3.934624] usb 5-1: Manufacturer: Logitech [ 3.943645] input: Logitech USB Receiver as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.0/0003:046D:C52B.0004/input/input7 [ 4.002215] hid-generic 0003:046D:C52B.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-5101400.usb-1/input0 [ 4.008419] input: Logitech USB Receiver Mouse as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input8 [ 4.008877] input: Logitech USB Receiver Consumer Control as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input9 [ 4.065886] input: Logitech USB Receiver System Control as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input10 [ 4.066269] hid-generic 0003:046D:C52B.0005: input,hiddev97,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-5101400.usb-1/input1 [ 4.070836] hid-generic 0003:046D:C52B.0006: hiddev98,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-5101400.usb-1/input2 [ 4.842234] systemd[1]: System time before build time, advancing clock. [ 4.939393] systemd[1]: systemd 249.11-0ubuntu3.1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 4.940061] systemd[1]: Detected architecture arm64. [ 4.943463] systemd[1]: Hostname set to <orangepi3-lts>. [ 6.280645] systemd[1]: Queued start job for default target Graphical Interface. [ 6.286592] systemd[1]: Created slice Slice /system/modprobe. [ 6.289331] systemd[1]: Created slice Slice /system/serial-getty. [ 6.291295] systemd[1]: Created slice User and Session Slice. [ 6.292193] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.293712] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.294623] systemd[1]: Reached target Remote File Systems. [ 6.294972] systemd[1]: Reached target Slice Units. [ 6.295321] systemd[1]: Reached target Swaps. [ 6.295639] systemd[1]: Reached target System Time Set. [ 6.296162] systemd[1]: Reached target Local Verity Protected Volumes. [ 6.297245] systemd[1]: Listening on Syslog Socket. [ 6.298236] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.298936] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.300397] systemd[1]: Listening on Journal Audit Socket. [ 6.301308] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.302450] systemd[1]: Listening on Journal Socket. [ 6.314214] systemd[1]: Listening on udev Control Socket. [ 6.315305] systemd[1]: Listening on udev Kernel Socket. [ 6.319750] systemd[1]: Mounting Huge Pages File System... [ 6.324879] systemd[1]: Mounting POSIX Message Queue File System... [ 6.330662] systemd[1]: Mounting Kernel Debug File System... [ 6.331975] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 6.339409] systemd[1]: Starting Restore / save the current clock... [ 6.345147] systemd[1]: Starting Set the console keyboard layout... [ 6.351732] systemd[1]: Starting Create List of Static Device Nodes... [ 6.358465] systemd[1]: Starting Load Kernel Module configfs... [ 6.365077] systemd[1]: Starting Load Kernel Module drm... [ 6.371961] systemd[1]: Starting Load Kernel Module fuse... [ 6.379481] systemd[1]: Started Nameserver information manager. [ 6.380900] systemd[1]: Reached target Preparation for Network. [ 6.382190] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 6.395121] systemd[1]: Starting Load Kernel Modules... [ 6.401214] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.407382] systemd[1]: Starting Coldplug All udev Devices... [ 6.419152] systemd[1]: Mounted Huge Pages File System. [ 6.420837] systemd[1]: Mounted POSIX Message Queue File System. [ 6.422359] systemd[1]: Mounted Kernel Debug File System. [ 6.425432] systemd[1]: Finished Restore / save the current clock. [ 6.425773] fuse: init (API version 7.34) [ 6.428513] systemd[1]: Finished Create List of Static Device Nodes. [ 6.431938] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 6.433283] systemd[1]: Finished Load Kernel Module configfs. [ 6.435491] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 6.436886] systemd[1]: Finished Load Kernel Module drm. [ 6.439563] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 6.440948] systemd[1]: Finished Load Kernel Module fuse. [ 6.447052] systemd[1]: Mounting FUSE Control File System... [ 6.452353] systemd[1]: Mounting Kernel Configuration File System... [ 6.459715] systemd[1]: Mounted FUSE Control File System. [ 6.466857] systemd[1]: Mounted Kernel Configuration File System. [ 6.475597] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none. [ 6.481220] systemd[1]: Finished Remount Root and Kernel File Systems. [ 6.482545] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 6.487218] systemd[1]: Starting Load/Save Random Seed... [ 6.493049] systemd[1]: Starting Create System Users... [ 6.672733] WCN: marlin_init entry! [ 6.673295] WCN: wcn config bt wake host [ 6.673640] WCN_ERR: dts node for bt_wake not found [ 6.673650] WCN: marlin2 parse_dt some para not config [ 6.673674] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 [ 6.678896] sdiohal:sdiohal_init ok [ 6.679750] systemd[1]: Finished Load/Save Random Seed. [ 6.679837] WCN: marlin_probe ok! [ 6.680959] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 6.701362] systemd[1]: Finished Create System Users. [ 6.703749] mtty_probe init device addr: 0x00000000fe1f7fb4 [ 6.703958] -->rfkill_bluetooth_init [ 6.704103] bluetooth_set_power: start_block=1 [ 6.704117] WCN: marlin power state:0, subsys: [MARLIN_BLUETOOTH] power 0 [ 6.704127] bluetooth_set_power: end_block=1 [ 6.704144] <--rfkill_bluetooth_init [ 6.708485] systemd[1]: Starting Create Static Device Nodes in /dev... [ 6.792500] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.794213] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.815600] [ADDR_MGT] addr_mgt_probe: module version: v1.0.9 [ 6.815713] [ADDR_MGT] addr_mgt_probe: success. [ 6.820941] systemd[1]: Finished Set the console keyboard layout. [ 6.882354] WCN: start_marlin [MARLIN_WIFI] [ 6.882379] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 [ 6.882388] WCN: the first power on start [ 6.885320] systemd[1]: Finished Create Static Device Nodes in /dev. [ 6.892712] systemd[1]: Reached target Preparation for Local File Systems. [ 6.905003] systemd[1]: Mounting /tmp... [ 6.919680] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 6.930260] systemd[1]: Mounted /tmp. [ 6.937592] systemd[1]: Reached target Local File Systems. [ 6.949729] systemd[1]: Starting Armbian leds state... [ 6.962125] systemd[1]: Starting Armbian ZRAM config... [ 6.974560] systemd[1]: Starting Set console font and keymap... [ 6.986826] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... [ 6.989569] WCN: marlin chip en dummy pull up -- need manually set GPIO [ 7.012697] systemd[1]: Starting Set Up Additional Binary Formats... [ 7.017639] sdiohal:sdiohal_scan_card [ 7.017848] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=50000000 [ 7.017940] WCN: marlin_scan_finish! [ 7.017944] sdiohal:probe ok [ 7.018067] sdiohal:scan end! [ 7.018073] WCN: then marlin start to download [ 7.018305] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 [ 7.018318] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! [ 7.021202] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 7.021629] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 7.024765] systemd[1]: Finished Set console font and keymap. [ 7.035619] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 366 (systemd-binfmt) [ 7.043152] systemd[1]: Mounting Arbitrary Executable File Formats File System... [ 7.060577] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data. [ 7.072721] systemd[1]: Finished Coldplug All udev Devices. [ 7.167303] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 7.177862] systemd[1]: Mounted Arbitrary Executable File Formats File System. [ 7.199741] systemd[1]: Finished Set Up Additional Binary Formats. [ 7.228170] systemd[1]: Finished Helper to synchronize boot up for ifupdown. [ 7.301685] systemd[1]: Finished Armbian leds state. [ 7.582111] systemd[1]: Started Rule-based Manager for Device Events and Files. [ 7.589917] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 7.590620] systemd[1]: Started Dispatch Password Requests to Console Directory Watch when bootsplash is active. [ 7.601725] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 7.601909] systemd[1]: Reached target Local Encrypted Volumes. [ 7.649290] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 7.693825] systemd[1]: Starting Load/Save RF Kill Switch Status... [ 7.870964] bluetooth_set_power: start_block=0 [ 7.870991] WCN: start_marlin [MARLIN_BLUETOOTH] [ 8.041648] systemd[1]: Found device /dev/ttyS0. [ 8.075381] WCN: combin_img 0 marlin_firmware_write finish and successful [ 8.075778] WCN: marlin_start_run read reset reg val:0x1 [ 8.075797] WCN: after do marlin_start_run reset reg val:0x0 [ 8.076026] WCN: s_marlin_bootup_time=8076026176 [ 8.081928] WCN: clock mode: TSX [ 8.082132] WCN: marlin_write_cali_data sync init_state:0x0 [ 8.109796] WCN: marlin_write_cali_data sync init_state:0x0 [ 8.137839] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1 [ 8.137866] WCN: sdio_config bt_wake_host trigger:[high] [ 8.137869] WCN: sdio_config irq:[inband] [ 8.137871] WCN: sdio_config wake_host_level_duration_time:[20ms] [ 8.137876] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse] [ 8.137878] WCN: marlin_send_sdio_config_to_cp sdio_config:0x80f01 (enable config) [ 8.138205] WCN: marlin_write_cali_data finish [ 8.138370] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.157809] panfrost 1800000.gpu: clock rate = 432000000 [ 8.157843] panfrost 1800000.gpu: bus_clock rate = 100000000 [ 8.158153] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0 [ 8.158164] panfrost 1800000.gpu: features: 00000000,10309e40, issues: 00000000,21054400 [ 8.158170] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7 [ 8.158178] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1 [ 8.159096] [drm] Initialized panfrost 1.2.0 20180908 for 1800000.gpu on minor 1 [ 8.165839] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.179510] mc: Linux media interface: v0.10 [ 8.193765] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.221809] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.249807] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0 [ 8.249830] WCN: marlin_bind_verify confuse data: 0x70f591d68e01b18d315da6e670879a4a [ 8.249845] WCN: marlin_bind_verify verify data: 0xa5709470f0031226394ebee725230b0c [ 8.250344] WCN: check_cp_ready sync val:0xf0f0f0f7, prj_type val:0x0 [ 8.277783] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0 [ 8.277802] sdiohal:sdiohal_runtime_get entry [ 8.277980] WCN: get_cp2_version entry! [ 8.299009] videodev: Linux video capture interface: v2.00 [ 8.317158] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~ [ 8.317230] WCN: switch_cp2_log - close entry! [ 8.318674] WCN: WCND at cmd read:OK [ 8.318761] WCN: then marlin download finished and run ok [ 8.318778] WCN: start_loopcheck [ 8.318884] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 1 [ 8.318895] WCN: marlin have open, GNSS is closed [ 8.318899] bluetooth_set_power: end_block=0 [ 8.320107] systemd[1]: Started Load/Save RF Kill Switch Status. [ 8.324478] zram: Added device: zram0 [ 8.325230] zram: Added device: zram1 [ 8.326075] zram: Added device: zram2 [ 8.354162] WCN: get_board_ant_num [one_ant] [ 8.354186] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini [ 8.365170] Registered IR keymap rc-empty [ 8.365298] rc rc0: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0 [ 8.366074] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter [ 8.366236] input: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0/input12 [ 8.378494] sunxi-ir 7040000.ir: initialized sunXi IR driver [ 8.434915] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings. [ 8.448849] systemd[1]: Finished Load Kernel Modules. [ 8.458292] systemd[1]: Starting Apply Kernel Variables... [ 8.514088] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned. [ 8.515483] cedrus 1c0e000.video-codec: Adding to iommu group 0 [ 8.518502] cedrus 1c0e000.video-codec: Device registered as /dev/video0 [ 8.567882] zram0: detected capacity change from 0 to 2037304 [ 8.631035] Adding 1018648k swap on /dev/zram0. Priority:5 extents:1 across:1018648k SSFS [ 8.653605] systemd[1]: Finished Apply Kernel Variables. [ 8.681160] systemd[1]: Starting Raise network interfaces... [ 8.791511] logitech-djreceiver 0003:046D:C52B.0006: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-5101400.usb-1/input2 [ 8.853254] zram1: detected capacity change from 0 to 102400 [ 8.977295] input: Logitech Wireless Device PID:4004 Keyboard as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.2/0003:046D:C52B.0006/0003:046D:4004.0007/input/input13 [ 9.045252] systemd[1]: Finished Armbian ZRAM config. [ 9.054870] hid-generic 0003:046D:4004.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4004] on usb-5101400.usb-1/input2:1 [ 9.055168] systemd[1]: Starting Armbian memory supported logging... [ 9.169531] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard. Quota mode: none. [ 9.215009] input: Logitech K360 as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.2/0003:046D:C52B.0006/0003:046D:4004.0007/input/input17 [ 9.215550] logitech-hidpp-device 0003:046D:4004.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K360] on usb-5101400.usb-1/input2:1 [ 9.699754] systemd[1]: Finished Raise network interfaces. [ 9.731709] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 9.732012] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 9.732412] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 9.738645] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 9.738778] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 9.738913] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 9.739051] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 9.894684] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 9.894922] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 9.894994] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 9.895091] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 9.895204] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 9.895323] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 11.563278] systemd[1]: Finished Armbian memory supported logging. [ 11.572525] systemd[1]: Starting Journal Service... [ 11.714105] systemd[1]: Started Journal Service. [ 11.743225] systemd-journald[691]: Received client request to flush runtime journal. ### armbian-release: # PLEASE DO NOT EDIT THIS FILE BOARD=orangepi3-lts BOARD_NAME="Orange Pi 3 LTS" BOARDFAMILY=sun50iw6 BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=13f5fba13c VERSION=22.05.3 LINUXFAMILY=sunxi64 ARCH=arm64 IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=stable BRANCH=current ### boot environment: verbosity=1 bootlogo=false console=both disp_mode=1920x1080p60 overlay_prefix=sun50i-h6 rootdev=UUID=71b44a6c-5bb8-4352-afe7-d22b8e62de4c rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u ### lsusb: Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ### lscpu: Architecture: aarch64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Vendor ID: ARM Model name: Cortex-A53 Model: 4 Thread(s) per core: 1 Core(s) per cluster: 4 Socket(s): - Cluster(s): 1 Stepping: r0p4 CPU max MHz: 1800.0000 CPU min MHz: 480.0000 BogoMIPS: 48.00 Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid NUMA node(s): 1 NUMA node0 CPU(s): 0-3 Vulnerability Itlb multihit: Not affected Vulnerability L1tf: Not affected Vulnerability Mds: Not affected Vulnerability Meltdown: Not affected Vulnerability Mmio stale data: Not affected Vulnerability Spec store bypass: Not affected Vulnerability Spectre v1: Mitigation; __user pointer sanitization Vulnerability Spectre v2: Not affected Vulnerability Srbds: Not affected Vulnerability Tsx async abort: Not affected ### cpuinfo: processor : 0 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 1 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 2 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 3 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 ### meminfo: MemTotal: 2037300 kB MemFree: 1847312 kB MemAvailable: 1852580 kB Buffers: 12528 kB Cached: 52716 kB SwapCached: 0 kB Active: 32252 kB Inactive: 53072 kB Active(anon): 440 kB Inactive(anon): 22936 kB Active(file): 31812 kB Inactive(file): 30136 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 1018648 kB SwapFree: 1018648 kB Dirty: 2404 kB Writeback: 0 kB AnonPages: 20120 kB Mapped: 16908 kB Shmem: 3384 kB KReclaimable: 10544 kB Slab: 46252 kB SReclaimable: 10544 kB SUnreclaim: 35708 kB KernelStack: 2480 kB PageTables: 1508 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2037296 kB Committed_AS: 42864 kB VmallocTotal: 133143592960 kB VmallocUsed: 22732 kB VmallocChunk: 0 kB Percpu: 976 kB AnonHugePages: 0 kB ShmemHugePages: 0 kB ShmemPmdMapped: 0 kB FileHugePages: 0 kB FilePmdMapped: 0 kB CmaTotal: 131072 kB CmaFree: 128768 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB Hugetlb: 0 kB ### virtual memory: vm.admin_reserve_kbytes = 8192 vm.compaction_proactiveness = 20 vm.compact_unevictable_allowed = 1 vm.dirty_background_bytes = 0 vm.dirty_background_ratio = 10 vm.dirty_bytes = 0 vm.dirty_expire_centisecs = 3000 vm.dirty_ratio = 20 vm.dirtytime_expire_seconds = 43200 vm.dirty_writeback_centisecs = 500 vm.extfrag_threshold = 500 vm.hugetlb_shm_group = 0 vm.laptop_mode = 0 vm.legacy_va_layout = 0 vm.lowmem_reserve_ratio = 256 256 32 0 vm.max_map_count = 65530 vm.min_free_kbytes = 22528 vm.min_slab_ratio = 5 vm.min_unmapped_ratio = 1 vm.mmap_min_addr = 32768 vm.mmap_rnd_bits = 18 vm.mmap_rnd_compat_bits = 11 vm.nr_hugepages = 0 vm.nr_hugepages_mempolicy = 0 vm.nr_overcommit_hugepages = 0 vm.numa_stat = 1 vm.numa_zonelist_order = Node vm.oom_dump_tasks = 1 vm.oom_kill_allocating_task = 0 vm.overcommit_kbytes = 0 vm.overcommit_memory = 0 vm.overcommit_ratio = 50 vm.page-cluster = 0 vm.page_lock_unfairness = 5 vm.panic_on_oom = 0 vm.percpu_pagelist_high_fraction = 0 vm.stat_interval = 1 vm.swappiness = 100 vm.user_reserve_kbytes = 63007 vm.vfs_cache_pressure = 100 vm.watermark_boost_factor = 15000 vm.watermark_scale_factor = 10 vm.zone_reclaim_mode = 0 ### ip addr: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 02:07:29:30:86:8c brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:32:c3:9f:6a:08 brd ff:ff:ff:ff:ff:ff ### partitions: major minor #blocks name 179 0 31205376 mmcblk0 179 1 30879744 mmcblk0p1 179 32 7634944 mmcblk2 252 0 1018652 zram0 252 1 51200 zram1 ### df: tmpfs 199M 3.4M 196M 2% /run /dev/mmcblk0p1 29G 4.9G 24G 18% / tmpfs 995M 0 995M 0% /dev/shm tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 995M 0 995M 0% /tmp /dev/zram1 47M 2.4M 42M 6% /var/log ### lsblk: NAME FSTYPE SIZE MOUNTPOINT UUID mmcblk0 29.8G └─mmcblk0p1 ext4 29.4G / 71b44a6c-5bb8-4352-afe7-d22b8e62de4c mmcblk2 swap 7.3G 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 mmcblk2boot0 swap 4M 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 mmcblk2boot1 swap 4M 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 zram1 50M /var/log zram2 0B ### zramctl: NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram1 zstd 50M 68K 721B 44K 4 /var/log /dev/zram0 lzo-rle 994.8M 4K 74B 12K 4 [SWAP] ### mtab: /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 ### mmc0:0001 info: fwrev: 0x0 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=USD MODALIAS=mmc:block cid: 1d414455534400001000005ae0016181 rca: 0x0001 csd: 400e00325b590000ee137f800a40004d manfid: 0x00001d ocr: 0x00200000 preferred_erase_size: 4194304 type: SD hwrev: 0x1 date: 01/2022 dsr: 0x404 erase_size: 512 oemid: 0x4144 serial: 0x00005ae0 ssr: 000000000500000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 scr: 02b5808200000000 name: USD ### mmc2:0001 info: fwrev: 0x0600000000000000 uevent: DRIVER=mmcblk MMC_TYPE=MMC MMC_NAME=8GTF4R MODALIAS=mmc:block cid: 15010038475446345206d410e21fc801 rel_sectors: 0x1 enhanced_rpmb_supported: 0x1 rca: 0x0001 pre_eol_info: 0x01 csd: d02701320f5903fff6dbffef8e40400d manfid: 0x000015 ocr: 0x00200000 preferred_erase_size: 4194304 enhanced_area_offset: 18446744073709551594 raw_rpmb_size_mult: 0x4 type: MMC hwrev: 0x0 date: 12/2021 prv: 0x6 ffu_capable: 1 dsr: 0x404 erase_size: 524288 life_time: 0x01 0x01 enhanced_area_size: 4294967274 oemid: 0x0100 serial: 0xd410e21f cmdq_en: 0 rev: 0x8 name: 8GTF4R ### Boot system health: Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 11:40:44: 1320MHz 0.23 46% 19% 13% 0% 12% 0% 63.6°C 0/9 11:40:44: 888MHz 0.23 12% 8% 2% 1% 0% 0% 63.6°C 0/9 11:40:44: 1080MHz 0.23 12% 9% 2% 0% 0% 0% 58.2°C 0/9 11:40:45: 1800MHz 0.23 12% 6% 4% 1% 0% 0% 58.3°C 0/9 11:40:45: 1800MHz 0.23 14% 9% 2% 1% 0% 0% 59.3°C 0/9 ### Activated 1 lzo-rle zram swap devices with 994MB each. ### Activated Armbian ramlog partition with zstd compression Thu Jun 23 11:48:16 AM CST 2022 | Orange Pi 3 LTS | 22.05.3 | arm64 | aarch64 | 5.15.48-sunxi64 ### dmesg: [ 1.272120] ohci-platform: OHCI generic platform driver [ 1.272614] usbcore: registered new interface driver usb-storage [ 1.273128] mousedev: PS/2 mouse device common for all mice [ 1.274160] sun6i-rtc 7000000.rtc: registered as rtc0 [ 1.274198] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-01T00:07:55 UTC (475) [ 1.274306] sun6i-rtc 7000000.rtc: RTC enabled [ 1.274449] i2c_dev: i2c /dev entries driver [ 1.275241] sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.276799] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pm not found, using dummy regulator [ 1.277224] sdhci: Secure Digital Host Controller Interface driver [ 1.277234] sdhci: Copyright(c) Pierre Ossman [ 1.277258] Synopsys Designware Multimedia Card Interface Driver [ 1.278091] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.278268] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pl not found, using dummy regulator [ 1.279331] ledtrig-cpu: registered to indicate activity on CPUs [ 1.279930] sun8i-ce 1904000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.280188] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.280330] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.280432] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.280526] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.280606] sun8i-ce 1904000.crypto: Register cbc(aes) [ 1.280754] sun8i-ce 1904000.crypto: Register ecb(aes) [ 1.280864] sun8i-ce 1904000.crypto: Register cbc(des3_ede) [ 1.280972] sun8i-ce 1904000.crypto: Register ecb(des3_ede) [ 1.281079] sun8i-ce 1904000.crypto: Register md5 [ 1.281186] sun8i-ce 1904000.crypto: Register sha1 [ 1.281293] sun8i-ce 1904000.crypto: Register sha224 [ 1.281401] sun8i-ce 1904000.crypto: Register sha256 [ 1.281507] sun8i-ce 1904000.crypto: Register sha384 [ 1.281665] sun8i-ce 1904000.crypto: Register sha512 [ 1.281777] sun8i-ce 1904000.crypto: Register stdrng [ 1.282517] sun8i-ce 1904000.crypto: CryptoEngine Die ID 0 [ 1.283115] hid: raw HID events driver (C) Jiri Kosina [ 1.283240] usbcore: registered new interface driver usbhid [ 1.283247] usbhid: USB HID core driver [ 1.284060] random: crng init done [ 1.286213] NET: Registered PF_INET6 protocol family [ 1.870216] Freeing initrd memory: 12684K [ 1.898965] Segment Routing with IPv6 [ 1.899073] In-situ OAM (IOAM) with IPv6 [ 1.899164] NET: Registered PF_PACKET protocol family [ 1.899302] 8021q: 802.1Q VLAN Support v1.8 [ 1.899459] 9pnet: Installing 9P2000 support [ 1.899532] Key type dns_resolver registered [ 1.899974] registered taskstats version 1 [ 1.899990] Loading compiled-in X.509 certificates [ 1.903826] Loaded X.509 cert 'Build time autogenerated kernel key: 32330adefd2da02e444296fafd37464380789679' [ 1.906701] zswap: loaded using pool zstd/z3fold [ 1.907326] Key type ._fscrypt registered [ 1.907334] Key type .fscrypt registered [ 1.907338] Key type fscrypt-provisioning registered [ 1.908346] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no [ 1.922075] Key type encrypted registered [ 1.922109] AppArmor: AppArmor sha1 policy hashing enabled [ 1.922149] ima: No TPM chip found, activating TPM-bypass! [ 1.922177] ima: Allocated hash algorithm: sha1 [ 1.922209] ima: No architecture policies found [ 1.922282] evm: Initialising EVM extended attributes: [ 1.922286] evm: security.selinux [ 1.922291] evm: security.SMACK64 [ 1.922296] evm: security.SMACK64EXEC [ 1.922300] evm: security.SMACK64TRANSMUTE [ 1.922304] evm: security.SMACK64MMAP [ 1.922308] evm: security.apparmor [ 1.922312] evm: security.ima [ 1.922316] evm: security.capability [ 1.922320] evm: HMAC attrs: 0x1 [ 1.935478] platform 1100000.mixer: Fixing up cyclic dependency with 6510000.tcon-top [ 1.935838] sun8i-mixer 1100000.mixer: Adding to iommu group 0 [ 1.937884] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.937915] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 1.938068] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f064 hci version 0x100 quirks 0x0000000002010010 [ 1.938129] xhci-hcd xhci-hcd.1.auto: irq 43, io mem 0x05200000 [ 1.938581] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.938597] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.938607] usb usb1: Product: xHCI Host Controller [ 1.938615] usb usb1: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd [ 1.938624] usb usb1: SerialNumber: xhci-hcd.1.auto [ 1.939157] hub 1-0:1.0: USB hub found [ 1.939202] hub 1-0:1.0: 1 port detected [ 1.939537] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.939557] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 1.939576] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 1.939668] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.939826] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 1.939839] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.939849] usb usb2: Product: xHCI Host Controller [ 1.939857] usb usb2: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd [ 1.939866] usb usb2: SerialNumber: xhci-hcd.1.auto [ 1.940303] hub 2-0:1.0: USB hub found [ 1.940340] hub 2-0:1.0: 1 port detected [ 1.942990] sun50i_cpufreq_nvmem: Using CPU speed bin speed0 [ 1.944802] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version [ 1.951206] of_cfs_init [ 1.951337] of_cfs_init: OK [ 1.951677] ALSA device list: [ 1.951684] No soundcards found. [ 1.952785] Freeing unused kernel memory: 2496K [ 1.973623] Run /init as init process [ 1.973631] with arguments: [ 1.973637] /init [ 1.973643] with environment: [ 1.973647] HOME=/ [ 1.973652] TERM=linux [ 1.973657] ubootpart=ce3dfe46-01 [ 1.973662] cgroup_enable=memory [ 2.193601] usb 1-1: new full-speed USB device number 2 using xhci-hcd [ 2.346592] usb 1-1: New USB device found, idVendor=045e, idProduct=0745, bcdDevice= 6.33 [ 2.346627] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.346638] usb 1-1: Product: Microsoft® 2.4GHz Transceiver v7.0 [ 2.346646] usb 1-1: Manufacturer: Microsoft [ 2.367970] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:045E:0745.0001/input/input0 [ 2.416093] axp20x-i2c 0-0036: AXP20x variant AXP806 found [ 2.429907] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input0 [ 2.437381] input: axp20x-pek as /devices/platform/soc/7081400.i2c/i2c-0/0-0036/axp221-pek/input/input1 [ 2.446665] vdd-cpu: supplied by vcc-5v [ 2.449719] vdd-gpu: supplied by vcc-5v [ 2.450579] vdd-sys: supplied by vcc-5v [ 2.451449] vcc-dram: supplied by vcc-5v [ 2.453703] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Mouse as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.1/0003:045E:0745.0002/input/input2 [ 2.454269] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.1/0003:045E:0745.0002/input/input3 [ 2.456626] vcc-pl-led-ir: supplied by vcc-5v [ 2.457495] vcc33-audio-tv-ephy-mac: supplied by vcc-5v [ 2.513978] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input1 [ 2.527597] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.2/0003:045E:0745.0003/input/input4 [ 2.566336] vcc33-io-pd-emmc-sd-usb-uart-1: supplied by vcc-5v [ 2.567031] vcc18-dram-bias-pll: supplied by vcc-5v [ 2.568106] vcc-efuse-pcie-hdmi-pc: supplied by vcc-5v [ 2.568777] vcc-wifi-io-pm-pg: supplied by vcc-5v [ 2.569573] bldo4: supplied by vcc-5v [ 2.570101] vcc33-io-pd-emmc-sd-usb-uart-2: supplied by vcc-5v [ 2.570919] cldo2: supplied by vcc-5v [ 2.571561] cldo3: supplied by vcc-5v [ 2.571822] sw: supplied by regulator-dummy [ 2.572376] axp20x-i2c 0-0036: AXP20X driver loaded [ 2.578873] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver [ 2.579353] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pb not found, using dummy regulator [ 2.580357] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator [ 2.581186] printk: console [ttyS0] disabled [ 2.581302] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 35, base_baud = 1500000) is a 16550A [ 2.581573] printk: console [ttyS0] enabled [ 2.582872] sun4i-drm display-engine: Adding to iommu group 0 [ 2.587091] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 System Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.2/0003:045E:0745.0003/input/input6 [ 2.588237] hid-generic 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input2 [ 2.602484] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800008e16990) [ 2.602783] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800008e1abb8) [ 2.603132] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800008e11ba0) [ 2.603237] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator [ 2.607552] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY) [ 2.610193] sun8i-dw-hdmi 6000000.hdmi: EVENT=plugin [ 2.611789] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.612790] sun4i-drm display-engine: bound 6000000.hdmi (ops 0xffff800008e15cc8) [ 2.614453] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 [ 2.614521] sun8i-dw-hdmi 6000000.hdmi: read_hpd result: 1 [ 2.770264] Console: switching to colour frame buffer device 240x67 [ 2.820085] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device [ 2.841915] acx00-codec acx00-codec: DMA mask not set [ 2.844695] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator [ 2.846014] sunxi-mmc 4020000.mmc: Got CD GPIO [ 2.846566] vcc-wifi-io: supplied by vcc33-wifi [ 2.848944] ehci-platform 5101000.usb: EHCI Host Controller [ 2.849108] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 3 [ 2.849277] ehci-platform 5101000.usb: irq 41, io mem 0x05101000 [ 2.861619] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00 [ 2.861961] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.861976] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.861987] usb usb3: Product: EHCI Host Controller [ 2.861995] usb usb3: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd [ 2.862004] usb usb3: SerialNumber: 5101000.usb [ 2.862573] hub 3-0:1.0: USB hub found [ 2.862616] hub 3-0:1.0: 1 port detected [ 2.863716] ehci-platform 5311000.usb: EHCI Host Controller [ 2.863754] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 4 [ 2.863897] ehci-platform 5311000.usb: irq 44, io mem 0x05311000 [ 2.869591] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 2.869910] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 2.877571] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00 [ 2.877916] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.877932] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.877943] usb usb4: Product: EHCI Host Controller [ 2.877951] usb usb4: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd [ 2.877960] usb usb4: SerialNumber: 5311000.usb [ 2.878516] hub 4-0:1.0: USB hub found [ 2.878560] hub 4-0:1.0: 1 port detected [ 2.879652] ohci-platform 5101400.usb: Generic Platform OHCI controller [ 2.879690] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 5 [ 2.879830] ohci-platform 5101400.usb: irq 42, io mem 0x05101400 [ 2.904492] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.906262] mmc0: Problem switching card into high-speed mode! [ 2.906374] mmc0: new SDHC card at address 0001 [ 2.907229] mmcblk0: mmc0:0001 USD 29.8 GiB [ 2.909255] mmcblk0: p1 [ 2.941827] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 2.941852] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.941862] usb usb5: Product: Generic Platform OHCI controller [ 2.941871] usb usb5: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd [ 2.941879] usb usb5: SerialNumber: 5101400.usb [ 2.942627] hub 5-0:1.0: USB hub found [ 2.942693] hub 5-0:1.0: 1 port detected [ 2.943898] ohci-platform 5311400.usb: Generic Platform OHCI controller [ 2.943950] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 6 [ 2.944086] ohci-platform 5311400.usb: irq 45, io mem 0x05311400 [ 2.997703] mmc2: new HS200 MMC card at address 0001 [ 2.998755] mmcblk2: mmc2:0001 8GTF4R 7.28 GiB [ 3.001037] mmcblk2boot0: mmc2:0001 8GTF4R 4.00 MiB [ 3.002672] mmcblk2boot1: mmc2:0001 8GTF4R 4.00 MiB [ 3.005930] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 3.005972] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.005984] usb usb6: Product: Generic Platform OHCI controller [ 3.005992] usb usb6: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd [ 3.006001] usb usb6: SerialNumber: 5311400.usb [ 3.006674] hub 6-0:1.0: USB hub found [ 3.006731] hub 6-0:1.0: 1 port detected [ 3.008066] usb_phy_generic usb_phy_generic.4.auto: supply vcc not found, using dummy regulator [ 3.008361] usb_phy_generic usb_phy_generic.4.auto: dummy supplies not allowed for exclusive requests [ 3.113914] musb-hdrc musb-hdrc.5.auto: MUSB HDRC host driver [ 3.113960] musb-hdrc musb-hdrc.5.auto: new USB bus registered, assigned bus number 7 [ 3.114250] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 3.114265] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.114276] usb usb7: Product: MUSB HDRC host driver [ 3.114284] usb usb7: Manufacturer: Linux 5.15.48-sunxi64 musb-hcd [ 3.114293] usb usb7: SerialNumber: musb-hdrc.5.auto [ 3.114896] hub 7-0:1.0: USB hub found [ 3.114955] hub 7-0:1.0: 1 port detected [ 3.135122] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found [ 3.135149] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found [ 3.135453] dwmac-sun8i 5020000.ethernet: supply phy-io not found, using dummy regulator [ 3.135754] dwmac-sun8i 5020000.ethernet: PTP uses main clock [ 3.135801] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 50000) [ 3.241842] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported [ 3.241868] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported [ 3.241876] dwmac-sun8i 5020000.ethernet: COE Type 2 [ 3.241886] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported [ 3.241894] dwmac-sun8i 5020000.ethernet: Normal descriptors [ 3.241901] dwmac-sun8i 5020000.ethernet: Chain mode enabled [ 3.460812] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null). Quota mode: none. [ 3.685578] usb 5-1: new full-speed USB device number 2 using ohci-platform [ 3.922615] usb 5-1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10 [ 3.922646] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.922656] usb 5-1: Product: USB Receiver [ 3.922665] usb 5-1: Manufacturer: Logitech [ 3.931703] input: Logitech USB Receiver as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.0/0003:046D:C52B.0004/input/input7 [ 3.990240] hid-generic 0003:046D:C52B.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-5101400.usb-1/input0 [ 3.996409] input: Logitech USB Receiver Mouse as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input8 [ 3.996878] input: Logitech USB Receiver Consumer Control as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input9 [ 4.053923] input: Logitech USB Receiver System Control as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input10 [ 4.054273] hid-generic 0003:046D:C52B.0005: input,hiddev97,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-5101400.usb-1/input1 [ 4.058954] hid-generic 0003:046D:C52B.0006: hiddev98,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-5101400.usb-1/input2 [ 4.755008] systemd[1]: System time before build time, advancing clock. [ 4.843289] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq [ 4.852360] systemd[1]: systemd 249.11-0ubuntu3.1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 4.853031] systemd[1]: Detected architecture arm64. [ 4.856401] systemd[1]: Hostname set to <orangepi3-lts>. [ 5.073589] sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 5.093717] mmc1: new high speed SDIO card at address 8800 [ 6.193792] systemd[1]: Queued start job for default target Graphical Interface. [ 6.199673] systemd[1]: Created slice Slice /system/modprobe. [ 6.202438] systemd[1]: Created slice Slice /system/serial-getty. [ 6.204317] systemd[1]: Created slice User and Session Slice. [ 6.205203] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.206686] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.207616] systemd[1]: Reached target Remote File Systems. [ 6.207972] systemd[1]: Reached target Slice Units. [ 6.208316] systemd[1]: Reached target Swaps. [ 6.208615] systemd[1]: Reached target System Time Set. [ 6.209148] systemd[1]: Reached target Local Verity Protected Volumes. [ 6.210233] systemd[1]: Listening on Syslog Socket. [ 6.211099] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.211773] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.213196] systemd[1]: Listening on Journal Audit Socket. [ 6.214166] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.215189] systemd[1]: Listening on Journal Socket. [ 6.226972] systemd[1]: Listening on udev Control Socket. [ 6.228070] systemd[1]: Listening on udev Kernel Socket. [ 6.232463] systemd[1]: Mounting Huge Pages File System... [ 6.237480] systemd[1]: Mounting POSIX Message Queue File System... [ 6.243196] systemd[1]: Mounting Kernel Debug File System... [ 6.244530] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 6.251806] systemd[1]: Starting Restore / save the current clock... [ 6.257507] systemd[1]: Starting Set the console keyboard layout... [ 6.264010] systemd[1]: Starting Create List of Static Device Nodes... [ 6.270697] systemd[1]: Starting Load Kernel Module configfs... [ 6.277248] systemd[1]: Starting Load Kernel Module drm... [ 6.284225] systemd[1]: Starting Load Kernel Module fuse... [ 6.290950] systemd[1]: Started Nameserver information manager. [ 6.293372] systemd[1]: Reached target Preparation for Network. [ 6.294676] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 6.305486] systemd[1]: Starting Load Kernel Modules... [ 6.311575] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.318055] systemd[1]: Starting Coldplug All udev Devices... [ 6.329070] systemd[1]: Mounted Huge Pages File System. [ 6.330531] systemd[1]: Mounted POSIX Message Queue File System. [ 6.331866] systemd[1]: Mounted Kernel Debug File System. [ 6.334637] systemd[1]: Finished Restore / save the current clock. [ 6.337208] fuse: init (API version 7.34) [ 6.338287] systemd[1]: Finished Create List of Static Device Nodes. [ 6.340802] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 6.342196] systemd[1]: Finished Load Kernel Module configfs. [ 6.344794] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 6.346196] systemd[1]: Finished Load Kernel Module drm. [ 6.348702] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 6.350366] systemd[1]: Finished Load Kernel Module fuse. [ 6.358420] systemd[1]: Mounting FUSE Control File System... [ 6.363565] systemd[1]: Mounting Kernel Configuration File System... [ 6.370549] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none. [ 6.378619] systemd[1]: Finished Remount Root and Kernel File Systems. [ 6.380232] systemd[1]: Mounted FUSE Control File System. [ 6.381348] systemd[1]: Mounted Kernel Configuration File System. [ 6.382326] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 6.387071] systemd[1]: Starting Load/Save Random Seed... [ 6.392540] systemd[1]: Starting Create System Users... [ 6.586419] WCN: marlin_init entry! [ 6.586991] WCN: wcn config bt wake host [ 6.587221] WCN_ERR: dts node for bt_wake not found [ 6.587225] WCN: marlin2 parse_dt some para not config [ 6.587238] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 [ 6.592123] sdiohal:sdiohal_init ok [ 6.592878] WCN: marlin_probe ok! [ 6.620583] mtty_probe init device addr: 0x00000000e28a0d2b [ 6.620797] -->rfkill_bluetooth_init [ 6.620939] bluetooth_set_power: start_block=1 [ 6.620953] WCN: marlin power state:0, subsys: [MARLIN_BLUETOOTH] power 0 [ 6.620964] bluetooth_set_power: end_block=1 [ 6.620984] <--rfkill_bluetooth_init [ 6.623689] systemd[1]: Finished Load/Save Random Seed. [ 6.626442] systemd[1]: Finished Create System Users. [ 6.627758] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 6.634972] systemd[1]: Starting Create Static Device Nodes in /dev... [ 6.763812] systemd[1]: Finished Set the console keyboard layout. [ 6.786911] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.788524] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.809385] [ADDR_MGT] addr_mgt_probe: module version: v1.0.9 [ 6.809498] [ADDR_MGT] addr_mgt_probe: success. [ 6.875323] WCN: start_marlin [MARLIN_WIFI] [ 6.875350] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 [ 6.875357] WCN: the first power on start [ 6.882798] systemd[1]: Finished Create Static Device Nodes in /dev. [ 6.890198] systemd[1]: Reached target Preparation for Local File Systems. [ 6.902433] systemd[1]: Mounting /tmp... [ 6.917110] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 6.928017] systemd[1]: Mounted /tmp. [ 6.935371] systemd[1]: Reached target Local File Systems. [ 6.947700] systemd[1]: Starting Armbian leds state... [ 6.960150] systemd[1]: Starting Armbian ZRAM config... [ 6.973058] systemd[1]: Starting Set console font and keymap... [ 6.981654] WCN: marlin chip en dummy pull up -- need manually set GPIO [ 6.985303] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... [ 7.009278] systemd[1]: Starting Set Up Additional Binary Formats... [ 7.009633] sdiohal:sdiohal_scan_card [ 7.009865] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=50000000 [ 7.009980] WCN: marlin_scan_finish! [ 7.009984] sdiohal:probe ok [ 7.010121] sdiohal:scan end! [ 7.010127] WCN: then marlin start to download [ 7.010352] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 [ 7.010365] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! [ 7.016147] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 7.016455] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 7.019509] systemd[1]: Finished Coldplug All udev Devices. [ 7.028350] systemd[1]: Finished Set console font and keymap. [ 7.059177] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 7.068115] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data. [ 7.075631] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 363 (systemd-binfmt) [ 7.080419] systemd[1]: Mounting Arbitrary Executable File Formats File System... [ 7.176429] systemd[1]: Mounted Arbitrary Executable File Formats File System. [ 7.195698] systemd[1]: Finished Set Up Additional Binary Formats. [ 7.204781] systemd[1]: Finished Helper to synchronize boot up for ifupdown. [ 7.302466] systemd[1]: Finished Armbian leds state. [ 7.578280] systemd[1]: Started Rule-based Manager for Device Events and Files. [ 7.586089] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 7.586742] systemd[1]: Started Dispatch Password Requests to Console Directory Watch when bootsplash is active. [ 7.594078] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 7.594232] systemd[1]: Reached target Local Encrypted Volumes. [ 7.650629] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 7.690721] systemd[1]: Starting Load/Save RF Kill Switch Status... [ 7.861430] bluetooth_set_power: start_block=0 [ 7.861457] WCN: start_marlin [MARLIN_BLUETOOTH] [ 8.022021] WCN: combin_img 0 marlin_firmware_write finish and successful [ 8.022313] WCN: marlin_start_run read reset reg val:0x1 [ 8.022320] WCN: after do marlin_start_run reset reg val:0x0 [ 8.022497] WCN: s_marlin_bootup_time=8022497218 [ 8.027371] mc: Linux media interface: v0.10 [ 8.029116] WCN: clock mode: TSX [ 8.029325] WCN: marlin_write_cali_data sync init_state:0x0 [ 8.042428] panfrost 1800000.gpu: clock rate = 432000000 [ 8.042461] panfrost 1800000.gpu: bus_clock rate = 100000000 [ 8.048008] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0 [ 8.048034] panfrost 1800000.gpu: features: 00000000,10309e40, issues: 00000000,21054400 [ 8.048042] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7 [ 8.048050] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1 [ 8.053842] WCN: marlin_write_cali_data sync init_state:0x0 [ 8.078362] videodev: Linux video capture interface: v2.00 [ 8.079820] systemd[1]: Found device /dev/ttyS0. [ 8.081868] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1 [ 8.081894] WCN: sdio_config bt_wake_host trigger:[high] [ 8.081897] WCN: sdio_config irq:[inband] [ 8.081899] WCN: sdio_config wake_host_level_duration_time:[20ms] [ 8.081903] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse] [ 8.081906] WCN: marlin_send_sdio_config_to_cp sdio_config:0x80f01 (enable config) [ 8.082330] WCN: marlin_write_cali_data finish [ 8.082591] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.083099] [drm] Initialized panfrost 1.2.0 20180908 for 1800000.gpu on minor 1 [ 8.109908] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.130243] zram: Added device: zram0 [ 8.137813] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.165793] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.181921] zram: Added device: zram1 [ 8.193819] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0 [ 8.193843] WCN: marlin_bind_verify confuse data: 0x2e197f4f5a1107df30c640a9405a3d69 [ 8.193860] WCN: marlin_bind_verify verify data: 0x016d6ab91e1d071b3ae4604f224021aa [ 8.194409] WCN: check_cp_ready sync val:0xf0f0f0f7, prj_type val:0x0 [ 8.198061] zram: Added device: zram2 [ 8.227589] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0 [ 8.227616] sdiohal:sdiohal_runtime_get entry [ 8.233394] WCN: get_cp2_version entry! [ 8.280833] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~ [ 8.280868] WCN: switch_cp2_log - close entry! [ 8.282187] WCN: WCND at cmd read:OK [ 8.282244] WCN: then marlin download finished and run ok [ 8.282258] WCN: start_loopcheck [ 8.282550] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 1 [ 8.282561] WCN: marlin have open, GNSS is closed [ 8.282565] bluetooth_set_power: end_block=0 [ 8.288920] systemd[1]: Started Load/Save RF Kill Switch Status. [ 8.306629] WCN: get_board_ant_num [one_ant] [ 8.306654] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini [ 8.380720] Registered IR keymap rc-empty [ 8.380846] rc rc0: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0 [ 8.381036] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter [ 8.381128] input: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0/input12 [ 8.381466] sunxi-ir 7040000.ir: initialized sunXi IR driver [ 8.387814] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings. [ 8.392387] systemd[1]: Finished Load Kernel Modules. [ 8.402147] systemd[1]: Starting Apply Kernel Variables... [ 8.499610] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned. [ 8.500798] cedrus 1c0e000.video-codec: Adding to iommu group 0 [ 8.501857] cedrus 1c0e000.video-codec: Device registered as /dev/video0 [ 8.621340] zram0: detected capacity change from 0 to 2037304 [ 8.651781] Adding 1018648k swap on /dev/zram0. Priority:5 extents:1 across:1018648k SSFS [ 8.687059] systemd[1]: Finished Apply Kernel Variables. [ 8.716975] systemd[1]: Starting Raise network interfaces... [ 8.871439] zram1: detected capacity change from 0 to 102400 [ 8.949631] logitech-djreceiver 0003:046D:C52B.0006: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-5101400.usb-1/input2 [ 9.026075] systemd[1]: Finished Armbian ZRAM config. [ 9.036822] systemd[1]: Starting Armbian memory supported logging... [ 9.110343] input: Logitech Wireless Device PID:4004 Keyboard as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.2/0003:046D:C52B.0006/0003:046D:4004.0007/input/input13 [ 9.157338] hid-generic 0003:046D:4004.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4004] on usb-5101400.usb-1/input2:1 [ 9.171004] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard. Quota mode: none. [ 9.327377] input: Logitech K360 as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.2/0003:046D:C52B.0006/0003:046D:4004.0007/input/input17 [ 9.328295] logitech-hidpp-device 0003:046D:4004.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K360] on usb-5101400.usb-1/input2:1 [ 9.690644] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 9.691310] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 9.692362] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 9.697275] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 9.697501] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 9.697835] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 9.697994] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 9.755895] systemd[1]: Finished Raise network interfaces. [ 9.998313] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 9.998546] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 9.998617] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 9.998708] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 9.998815] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 9.998931] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 11.573639] systemd[1]: Finished Armbian memory supported logging. [ 11.584810] systemd[1]: Starting Journal Service... [ 11.722369] systemd[1]: Started Journal Service. [ 11.750846] systemd-journald[690]: Received client request to flush runtime journal. ### armbian-release: # PLEASE DO NOT EDIT THIS FILE BOARD=orangepi3-lts BOARD_NAME="Orange Pi 3 LTS" BOARDFAMILY=sun50iw6 BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=13f5fba13c VERSION=22.05.3 LINUXFAMILY=sunxi64 ARCH=arm64 IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=stable BRANCH=current ### boot environment: verbosity=1 bootlogo=false console=both disp_mode=1920x1080p60 overlay_prefix=sun50i-h6 rootdev=UUID=71b44a6c-5bb8-4352-afe7-d22b8e62de4c rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u ### lsusb: Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ### lscpu: Architecture: aarch64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Vendor ID: ARM Model name: Cortex-A53 Model: 4 Thread(s) per core: 1 Core(s) per cluster: 4 Socket(s): - Cluster(s): 1 Stepping: r0p4 CPU max MHz: 1800.0000 CPU min MHz: 480.0000 BogoMIPS: 48.00 Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid NUMA node(s): 1 NUMA node0 CPU(s): 0-3 Vulnerability Itlb multihit: Not affected Vulnerability L1tf: Not affected Vulnerability Mds: Not affected Vulnerability Meltdown: Not affected Vulnerability Mmio stale data: Not affected Vulnerability Spec store bypass: Not affected Vulnerability Spectre v1: Mitigation; __user pointer sanitization Vulnerability Spectre v2: Not affected Vulnerability Srbds: Not affected Vulnerability Tsx async abort: Not affected ### cpuinfo: processor : 0 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 1 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 2 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 3 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 ### meminfo: MemTotal: 2037300 kB MemFree: 1845772 kB MemAvailable: 1851244 kB Buffers: 12532 kB Cached: 52908 kB SwapCached: 0 kB Active: 32344 kB Inactive: 52708 kB Active(anon): 428 kB Inactive(anon): 22452 kB Active(file): 31916 kB Inactive(file): 30256 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 1018648 kB SwapFree: 1018648 kB Dirty: 2836 kB Writeback: 0 kB AnonPages: 19400 kB Mapped: 16772 kB Shmem: 3376 kB KReclaimable: 10500 kB Slab: 45964 kB SReclaimable: 10500 kB SUnreclaim: 35464 kB KernelStack: 2448 kB PageTables: 1528 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2037296 kB Committed_AS: 42340 kB VmallocTotal: 133143592960 kB VmallocUsed: 22684 kB VmallocChunk: 0 kB Percpu: 976 kB AnonHugePages: 0 kB ShmemHugePages: 0 kB ShmemPmdMapped: 0 kB FileHugePages: 0 kB FilePmdMapped: 0 kB CmaTotal: 131072 kB CmaFree: 128768 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB Hugetlb: 0 kB ### virtual memory: vm.admin_reserve_kbytes = 8192 vm.compaction_proactiveness = 20 vm.compact_unevictable_allowed = 1 vm.dirty_background_bytes = 0 vm.dirty_background_ratio = 10 vm.dirty_bytes = 0 vm.dirty_expire_centisecs = 3000 vm.dirty_ratio = 20 vm.dirtytime_expire_seconds = 43200 vm.dirty_writeback_centisecs = 500 vm.extfrag_threshold = 500 vm.hugetlb_shm_group = 0 vm.laptop_mode = 0 vm.legacy_va_layout = 0 vm.lowmem_reserve_ratio = 256 256 32 0 vm.max_map_count = 65530 vm.min_free_kbytes = 22528 vm.min_slab_ratio = 5 vm.min_unmapped_ratio = 1 vm.mmap_min_addr = 32768 vm.mmap_rnd_bits = 18 vm.mmap_rnd_compat_bits = 11 vm.nr_hugepages = 0 vm.nr_hugepages_mempolicy = 0 vm.nr_overcommit_hugepages = 0 vm.numa_stat = 1 vm.numa_zonelist_order = Node vm.oom_dump_tasks = 1 vm.oom_kill_allocating_task = 0 vm.overcommit_kbytes = 0 vm.overcommit_memory = 0 vm.overcommit_ratio = 50 vm.page-cluster = 0 vm.page_lock_unfairness = 5 vm.panic_on_oom = 0 vm.percpu_pagelist_high_fraction = 0 vm.stat_interval = 1 vm.swappiness = 100 vm.user_reserve_kbytes = 63011 vm.vfs_cache_pressure = 100 vm.watermark_boost_factor = 15000 vm.watermark_scale_factor = 10 vm.zone_reclaim_mode = 0 ### ip addr: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 02:07:29:30:86:8c brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:32:c3:9f:6a:08 brd ff:ff:ff:ff:ff:ff ### partitions: major minor #blocks name 179 0 31205376 mmcblk0 179 1 30879744 mmcblk0p1 179 32 7634944 mmcblk2 252 0 1018652 zram0 252 1 51200 zram1 ### df: tmpfs 199M 3.4M 196M 2% /run /dev/mmcblk0p1 29G 4.9G 24G 18% / tmpfs 995M 0 995M 0% /dev/shm tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 995M 0 995M 0% /tmp /dev/zram1 47M 2.8M 41M 7% /var/log ### lsblk: NAME FSTYPE SIZE MOUNTPOINT UUID mmcblk0 29.8G └─mmcblk0p1 ext4 29.4G / 71b44a6c-5bb8-4352-afe7-d22b8e62de4c mmcblk2 swap 7.3G 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 mmcblk2boot0 swap 4M 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 mmcblk2boot1 swap 4M 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 zram1 50M /var/log zram2 0B ### zramctl: NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram1 zstd 50M 68K 728B 44K 4 /var/log /dev/zram0 lzo-rle 994.8M 4K 74B 12K 4 [SWAP] ### mtab: /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 ### mmc0:0001 info: fwrev: 0x0 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=USD MODALIAS=mmc:block cid: 1d414455534400001000005ae0016181 rca: 0x0001 csd: 400e00325b590000ee137f800a40004d manfid: 0x00001d ocr: 0x00200000 preferred_erase_size: 4194304 type: SD hwrev: 0x1 date: 01/2022 dsr: 0x404 erase_size: 512 oemid: 0x4144 serial: 0x00005ae0 ssr: 000000000500000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 scr: 02b5808200000000 name: USD ### mmc2:0001 info: fwrev: 0x0600000000000000 uevent: DRIVER=mmcblk MMC_TYPE=MMC MMC_NAME=8GTF4R MODALIAS=mmc:block cid: 15010038475446345206d410e21fc801 rel_sectors: 0x1 enhanced_rpmb_supported: 0x1 rca: 0x0001 pre_eol_info: 0x01 csd: d02701320f5903fff6dbffef8e40400d manfid: 0x000015 ocr: 0x00200000 preferred_erase_size: 4194304 enhanced_area_offset: 18446744073709551594 raw_rpmb_size_mult: 0x4 type: MMC hwrev: 0x0 date: 12/2021 prv: 0x6 ffu_capable: 1 dsr: 0x404 erase_size: 524288 life_time: 0x01 0x01 enhanced_area_size: 4294967274 oemid: 0x0100 serial: 0xd410e21f cmdq_en: 0 rev: 0x8 name: 8GTF4R ### Boot system health: Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 11:48:18: 1608MHz 1.34 46% 19% 13% 0% 12% 0% 65.9°C 0/9 11:48:18: 1080MHz 1.34 11% 6% 4% 1% 0% 0% 65.9°C 0/9 11:48:18: 816MHz 1.34 12% 7% 3% 1% 0% 0% 61.8°C 0/9 11:48:19: 888MHz 1.34 13% 9% 2% 1% 0% 0% 60.3°C 0/9 11:48:19: 1800MHz 1.34 12% 10% 2% 0% 0% 0% 62.2°C 0/9 ### Activated 1 lzo-rle zram swap devices with 994MB each. ### Activated Armbian ramlog partition with zstd compression Tue Jun 28 07:44:49 AM CST 2022 | Orange Pi 3 LTS | 22.05.3 | arm64 | aarch64 | 5.15.48-sunxi64 ### dmesg: [ 1.271004] i2c_dev: i2c /dev entries driver [ 1.271798] sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.273360] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pm not found, using dummy regulator [ 1.273780] sdhci: Secure Digital Host Controller Interface driver [ 1.273788] sdhci: Copyright(c) Pierre Ossman [ 1.273812] Synopsys Designware Multimedia Card Interface Driver [ 1.274605] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.274770] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pl not found, using dummy regulator [ 1.276126] ledtrig-cpu: registered to indicate activity on CPUs [ 1.276686] sun8i-ce 1904000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.276980] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.277121] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.277218] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.277342] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.277430] sun8i-ce 1904000.crypto: Register cbc(aes) [ 1.277588] sun8i-ce 1904000.crypto: Register ecb(aes) [ 1.277706] sun8i-ce 1904000.crypto: Register cbc(des3_ede) [ 1.277822] sun8i-ce 1904000.crypto: Register ecb(des3_ede) [ 1.277932] sun8i-ce 1904000.crypto: Register md5 [ 1.278040] sun8i-ce 1904000.crypto: Register sha1 [ 1.278147] sun8i-ce 1904000.crypto: Register sha224 [ 1.278256] sun8i-ce 1904000.crypto: Register sha256 [ 1.278363] sun8i-ce 1904000.crypto: Register sha384 [ 1.278481] sun8i-ce 1904000.crypto: Register sha512 [ 1.278588] sun8i-ce 1904000.crypto: Register stdrng [ 1.279328] sun8i-ce 1904000.crypto: CryptoEngine Die ID 0 [ 1.279920] hid: raw HID events driver (C) Jiri Kosina [ 1.280051] usbcore: registered new interface driver usbhid [ 1.280059] usbhid: USB HID core driver [ 1.280834] random: crng init done [ 1.283096] NET: Registered PF_INET6 protocol family [ 1.870220] Freeing initrd memory: 12684K [ 1.898842] Segment Routing with IPv6 [ 1.898907] In-situ OAM (IOAM) with IPv6 [ 1.898991] NET: Registered PF_PACKET protocol family [ 1.899097] 8021q: 802.1Q VLAN Support v1.8 [ 1.899247] 9pnet: Installing 9P2000 support [ 1.899322] Key type dns_resolver registered [ 1.899785] registered taskstats version 1 [ 1.899801] Loading compiled-in X.509 certificates [ 1.903658] Loaded X.509 cert 'Build time autogenerated kernel key: 32330adefd2da02e444296fafd37464380789679' [ 1.906608] zswap: loaded using pool zstd/z3fold [ 1.907226] Key type ._fscrypt registered [ 1.907235] Key type .fscrypt registered [ 1.907240] Key type fscrypt-provisioning registered [ 1.908245] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no [ 1.922095] Key type encrypted registered [ 1.922126] AppArmor: AppArmor sha1 policy hashing enabled [ 1.922166] ima: No TPM chip found, activating TPM-bypass! [ 1.922195] ima: Allocated hash algorithm: sha1 [ 1.922227] ima: No architecture policies found [ 1.922282] evm: Initialising EVM extended attributes: [ 1.922287] evm: security.selinux [ 1.922292] evm: security.SMACK64 [ 1.922296] evm: security.SMACK64EXEC [ 1.922300] evm: security.SMACK64TRANSMUTE [ 1.922304] evm: security.SMACK64MMAP [ 1.922308] evm: security.apparmor [ 1.922313] evm: security.ima [ 1.922317] evm: security.capability [ 1.922321] evm: HMAC attrs: 0x1 [ 1.935406] platform 1100000.mixer: Fixing up cyclic dependency with 6510000.tcon-top [ 1.935756] sun8i-mixer 1100000.mixer: Adding to iommu group 0 [ 1.937838] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.937871] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 1.938040] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f064 hci version 0x100 quirks 0x0000000002010010 [ 1.938102] xhci-hcd xhci-hcd.1.auto: irq 43, io mem 0x05200000 [ 1.938567] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.938584] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.938594] usb usb1: Product: xHCI Host Controller [ 1.938603] usb usb1: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd [ 1.938611] usb usb1: SerialNumber: xhci-hcd.1.auto [ 1.939145] hub 1-0:1.0: USB hub found [ 1.939190] hub 1-0:1.0: 1 port detected [ 1.939527] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.939547] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 1.939567] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 1.939664] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.939823] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 1.939836] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.939846] usb usb2: Product: xHCI Host Controller [ 1.939854] usb usb2: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd [ 1.939863] usb usb2: SerialNumber: xhci-hcd.1.auto [ 1.940275] hub 2-0:1.0: USB hub found [ 1.940310] hub 2-0:1.0: 1 port detected [ 1.942951] sun50i_cpufreq_nvmem: Using CPU speed bin speed0 [ 1.944731] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version [ 1.951102] of_cfs_init [ 1.951222] of_cfs_init: OK [ 1.951547] ALSA device list: [ 1.951553] No soundcards found. [ 1.952660] Freeing unused kernel memory: 2496K [ 1.985358] Run /init as init process [ 1.985366] with arguments: [ 1.985373] /init [ 1.985378] with environment: [ 1.985383] HOME=/ [ 1.985388] TERM=linux [ 1.985393] ubootpart=ce3dfe46-01 [ 1.985398] cgroup_enable=memory [ 2.197340] usb 1-1: new full-speed USB device number 2 using xhci-hcd [ 2.350433] usb 1-1: New USB device found, idVendor=045e, idProduct=0745, bcdDevice= 6.33 [ 2.350464] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.350474] usb 1-1: Product: Microsoft® 2.4GHz Transceiver v7.0 [ 2.350483] usb 1-1: Manufacturer: Microsoft [ 2.375225] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:045E:0745.0001/input/input0 [ 2.438207] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input0 [ 2.442434] axp20x-i2c 0-0036: AXP20x variant AXP806 found [ 2.450726] input: axp20x-pek as /devices/platform/soc/7081400.i2c/i2c-0/0-0036/axp221-pek/input/input1 [ 2.454955] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Mouse as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.1/0003:045E:0745.0002/input/input2 [ 2.460662] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.1/0003:045E:0745.0002/input/input3 [ 2.462363] vdd-cpu: supplied by vcc-5v [ 2.463981] vdd-gpu: supplied by vcc-5v [ 2.464566] vdd-sys: Bringing 900000uV into 960000-960000uV [ 2.464950] vdd-sys: supplied by vcc-5v [ 2.465877] vcc-dram: supplied by vcc-5v [ 2.466667] vcc-pl-led-ir: supplied by vcc-5v [ 2.467435] vcc33-audio-tv-ephy-mac: Bringing 700000uV into 3300000-3300000uV [ 2.467815] vcc33-audio-tv-ephy-mac: supplied by vcc-5v [ 2.517838] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input1 [ 2.526830] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.2/0003:045E:0745.0003/input/input4 [ 2.574062] vcc33-io-pd-emmc-sd-usb-uart-1: Bringing 700000uV into 3300000-3300000uV [ 2.574423] vcc33-io-pd-emmc-sd-usb-uart-1: supplied by vcc-5v [ 2.575457] vcc18-dram-bias-pll: supplied by vcc-5v [ 2.576536] vcc-efuse-pcie-hdmi-pc: supplied by vcc-5v [ 2.577198] vcc-wifi-io-pm-pg: Bringing 700000uV into 1800000-1800000uV [ 2.577534] vcc-wifi-io-pm-pg: supplied by vcc-5v [ 2.578659] bldo4: supplied by vcc-5v [ 2.579187] vcc33-io-pd-emmc-sd-usb-uart-2: supplied by vcc-5v [ 2.580004] cldo2: supplied by vcc-5v [ 2.580651] cldo3: supplied by vcc-5v [ 2.580881] sw: supplied by regulator-dummy [ 2.581462] axp20x-i2c 0-0036: AXP20X driver loaded [ 2.587289] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 System Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.2/0003:045E:0745.0003/input/input6 [ 2.587787] hid-generic 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input2 [ 2.590166] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver [ 2.590661] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pb not found, using dummy regulator [ 2.591648] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator [ 2.592259] printk: console [ttyS0] disabled [ 2.592370] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 35, base_baud = 1500000) is a 16550A [ 2.592603] printk: console [ttyS0] enabled [ 2.594026] sun4i-drm display-engine: Adding to iommu group 0 [ 2.614241] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800008e16990) [ 2.614521] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800008e1abb8) [ 2.614859] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800008e11ba0) [ 2.614950] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator [ 2.615547] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY) [ 2.615931] sun8i-dw-hdmi 6000000.hdmi: EVENT=plugin [ 2.616321] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.616766] sun4i-drm display-engine: bound 6000000.hdmi (ops 0xffff800008e15cc8) [ 2.627717] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 [ 2.627781] sun8i-dw-hdmi 6000000.hdmi: read_hpd result: 1 [ 2.785963] Console: switching to colour frame buffer device 240x67 [ 2.835811] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device [ 2.857467] acx00-codec acx00-codec: DMA mask not set [ 2.859822] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator [ 2.862436] sunxi-mmc 4020000.mmc: Got CD GPIO [ 2.862855] vcc-wifi-io: supplied by vcc33-wifi [ 2.865691] ehci-platform 5101000.usb: EHCI Host Controller [ 2.865735] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 3 [ 2.865880] ehci-platform 5101000.usb: irq 41, io mem 0x05101000 [ 2.885309] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00 [ 2.885313] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 2.885574] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 2.885643] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.885658] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.885669] usb usb3: Product: EHCI Host Controller [ 2.885677] usb usb3: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd [ 2.885686] usb usb3: SerialNumber: 5101000.usb [ 2.886286] hub 3-0:1.0: USB hub found [ 2.886349] hub 3-0:1.0: 1 port detected [ 2.887655] ehci-platform 5311000.usb: EHCI Host Controller [ 2.887708] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 4 [ 2.887848] ehci-platform 5311000.usb: irq 44, io mem 0x05311000 [ 2.905298] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00 [ 2.905653] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.905668] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.905678] usb usb4: Product: EHCI Host Controller [ 2.905687] usb usb4: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd [ 2.905695] usb usb4: SerialNumber: 5311000.usb [ 2.906266] hub 4-0:1.0: USB hub found [ 2.906311] hub 4-0:1.0: 1 port detected [ 2.907463] ohci-platform 5101400.usb: Generic Platform OHCI controller [ 2.907502] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 5 [ 2.907639] ohci-platform 5101400.usb: irq 42, io mem 0x05101400 [ 2.920322] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.922092] mmc0: Problem switching card into high-speed mode! [ 2.922211] mmc0: new SDHC card at address 0001 [ 2.923101] mmcblk0: mmc0:0001 USD 29.8 GiB [ 2.925179] mmcblk0: p1 [ 2.969595] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 2.969624] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.969635] usb usb5: Product: Generic Platform OHCI controller [ 2.969643] usb usb5: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd [ 2.969652] usb usb5: SerialNumber: 5101400.usb [ 2.970330] hub 5-0:1.0: USB hub found [ 2.970383] hub 5-0:1.0: 1 port detected [ 2.971617] ohci-platform 5311400.usb: Generic Platform OHCI controller [ 2.971660] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 6 [ 2.971801] ohci-platform 5311400.usb: irq 45, io mem 0x05311400 [ 3.017445] mmc2: new HS200 MMC card at address 0001 [ 3.018424] mmcblk2: mmc2:0001 8GTF4R 7.28 GiB [ 3.020685] mmcblk2boot0: mmc2:0001 8GTF4R 4.00 MiB [ 3.022339] mmcblk2boot1: mmc2:0001 8GTF4R 4.00 MiB [ 3.033624] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 3.033662] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.033673] usb usb6: Product: Generic Platform OHCI controller [ 3.033682] usb usb6: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd [ 3.033690] usb usb6: SerialNumber: 5311400.usb [ 3.034410] hub 6-0:1.0: USB hub found [ 3.034470] hub 6-0:1.0: 1 port detected [ 3.035805] usb_phy_generic usb_phy_generic.4.auto: supply vcc not found, using dummy regulator [ 3.036009] usb_phy_generic usb_phy_generic.4.auto: dummy supplies not allowed for exclusive requests [ 3.133661] musb-hdrc musb-hdrc.5.auto: MUSB HDRC host driver [ 3.133704] musb-hdrc musb-hdrc.5.auto: new USB bus registered, assigned bus number 7 [ 3.133977] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 3.133993] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.134004] usb usb7: Product: MUSB HDRC host driver [ 3.134012] usb usb7: Manufacturer: Linux 5.15.48-sunxi64 musb-hcd [ 3.134020] usb usb7: SerialNumber: musb-hdrc.5.auto [ 3.134715] hub 7-0:1.0: USB hub found [ 3.134773] hub 7-0:1.0: 1 port detected [ 3.150722] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found [ 3.150748] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found [ 3.151052] dwmac-sun8i 5020000.ethernet: supply phy-io not found, using dummy regulator [ 3.151322] dwmac-sun8i 5020000.ethernet: PTP uses main clock [ 3.151370] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 50000) [ 3.257560] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported [ 3.257587] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported [ 3.257594] dwmac-sun8i 5020000.ethernet: COE Type 2 [ 3.257604] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported [ 3.257612] dwmac-sun8i 5020000.ethernet: Normal descriptors [ 3.257619] dwmac-sun8i 5020000.ethernet: Chain mode enabled [ 3.485042] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null). Quota mode: none. [ 3.701321] usb 5-1: new full-speed USB device number 2 using ohci-platform [ 3.938354] usb 5-1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10 [ 3.938383] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.938394] usb 5-1: Product: USB Receiver [ 3.938402] usb 5-1: Manufacturer: Logitech [ 3.947518] input: Logitech USB Receiver as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.0/0003:046D:C52B.0004/input/input7 [ 4.006002] hid-generic 0003:046D:C52B.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-5101400.usb-1/input0 [ 4.012208] input: Logitech USB Receiver Mouse as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input8 [ 4.012665] input: Logitech USB Receiver Consumer Control as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input9 [ 4.069662] input: Logitech USB Receiver System Control as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input10 [ 4.070031] hid-generic 0003:046D:C52B.0005: input,hiddev97,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-5101400.usb-1/input1 [ 4.074797] hid-generic 0003:046D:C52B.0006: hiddev98,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-5101400.usb-1/input2 [ 4.780230] systemd[1]: System time before build time, advancing clock. [ 4.868365] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq [ 4.877545] systemd[1]: systemd 249.11-0ubuntu3.1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 4.878226] systemd[1]: Detected architecture arm64. [ 4.881592] systemd[1]: Hostname set to <orangepi3-lts>. [ 5.101862] sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 5.119516] mmc1: new high speed SDIO card at address 8800 [ 6.293876] systemd[1]: Queued start job for default target Graphical Interface. [ 6.299750] systemd[1]: Created slice Slice /system/modprobe. [ 6.302537] systemd[1]: Created slice Slice /system/serial-getty. [ 6.304385] systemd[1]: Created slice User and Session Slice. [ 6.305369] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.306819] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.307696] systemd[1]: Reached target Remote File Systems. [ 6.308041] systemd[1]: Reached target Slice Units. [ 6.308380] systemd[1]: Reached target Swaps. [ 6.308677] systemd[1]: Reached target System Time Set. [ 6.309210] systemd[1]: Reached target Local Verity Protected Volumes. [ 6.310301] systemd[1]: Listening on Syslog Socket. [ 6.311159] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.311801] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.313180] systemd[1]: Listening on Journal Audit Socket. [ 6.314227] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.315211] systemd[1]: Listening on Journal Socket. [ 6.326975] systemd[1]: Listening on udev Control Socket. [ 6.328076] systemd[1]: Listening on udev Kernel Socket. [ 6.332683] systemd[1]: Mounting Huge Pages File System... [ 6.338074] systemd[1]: Mounting POSIX Message Queue File System... [ 6.343823] systemd[1]: Mounting Kernel Debug File System... [ 6.345097] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 6.352304] systemd[1]: Starting Restore / save the current clock... [ 6.358015] systemd[1]: Starting Set the console keyboard layout... [ 6.364390] systemd[1]: Starting Create List of Static Device Nodes... [ 6.371017] systemd[1]: Starting Load Kernel Module configfs... [ 6.377727] systemd[1]: Starting Load Kernel Module drm... [ 6.384315] systemd[1]: Starting Load Kernel Module fuse... [ 6.391403] systemd[1]: Started Nameserver information manager. [ 6.392936] systemd[1]: Reached target Preparation for Network. [ 6.394122] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 6.406943] systemd[1]: Starting Load Kernel Modules... [ 6.412637] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.418869] systemd[1]: Starting Coldplug All udev Devices... [ 6.429912] systemd[1]: Mounted Huge Pages File System. [ 6.431274] systemd[1]: Mounted POSIX Message Queue File System. [ 6.432661] systemd[1]: Mounted Kernel Debug File System. [ 6.435426] systemd[1]: Finished Restore / save the current clock. [ 6.438862] systemd[1]: Finished Create List of Static Device Nodes. [ 6.439496] fuse: init (API version 7.34) [ 6.441770] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 6.443183] systemd[1]: Finished Load Kernel Module configfs. [ 6.446061] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 6.447247] systemd[1]: Finished Load Kernel Module drm. [ 6.449663] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 6.450951] systemd[1]: Finished Load Kernel Module fuse. [ 6.458776] systemd[1]: Mounting FUSE Control File System... [ 6.464040] systemd[1]: Mounting Kernel Configuration File System... [ 6.474677] systemd[1]: Mounted FUSE Control File System. [ 6.475071] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none. [ 6.481615] systemd[1]: Finished Remount Root and Kernel File Systems. [ 6.483009] systemd[1]: Mounted Kernel Configuration File System. [ 6.483907] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 6.488816] systemd[1]: Starting Load/Save Random Seed... [ 6.494729] systemd[1]: Starting Create System Users... [ 6.660140] WCN: marlin_init entry! [ 6.660666] WCN: wcn config bt wake host [ 6.660887] WCN_ERR: dts node for bt_wake not found [ 6.660891] WCN: marlin2 parse_dt some para not config [ 6.660903] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 [ 6.665745] sdiohal:sdiohal_init ok [ 6.666445] WCN: marlin_probe ok! [ 6.691458] mtty_probe init device addr: 0x00000000009926d4 [ 6.691698] -->rfkill_bluetooth_init [ 6.691861] bluetooth_set_power: start_block=1 [ 6.691875] WCN: marlin power state:0, subsys: [MARLIN_BLUETOOTH] power 0 [ 6.691886] bluetooth_set_power: end_block=1 [ 6.691905] <--rfkill_bluetooth_init [ 6.715886] systemd[1]: Finished Load/Save Random Seed. [ 6.718379] systemd[1]: Finished Create System Users. [ 6.719559] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 6.724878] systemd[1]: Starting Create Static Device Nodes in /dev... [ 6.796727] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.798565] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.819533] [ADDR_MGT] addr_mgt_probe: module version: v1.0.9 [ 6.819648] [ADDR_MGT] addr_mgt_probe: success. [ 6.863106] systemd[1]: Finished Set the console keyboard layout. [ 6.887348] WCN: start_marlin [MARLIN_WIFI] [ 6.887375] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 [ 6.887385] WCN: the first power on start [ 6.894415] systemd[1]: Finished Create Static Device Nodes in /dev. [ 6.901977] systemd[1]: Reached target Preparation for Local File Systems. [ 6.914256] systemd[1]: Mounting /tmp... [ 6.928825] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 6.939787] systemd[1]: Mounted /tmp. [ 6.947152] systemd[1]: Reached target Local File Systems. [ 6.959184] systemd[1]: Starting Armbian leds state... [ 6.971551] systemd[1]: Starting Armbian ZRAM config... [ 6.984210] systemd[1]: Starting Set console font and keymap... [ 6.993355] WCN: marlin chip en dummy pull up -- need manually set GPIO [ 6.996364] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... [ 7.021397] sdiohal:sdiohal_scan_card [ 7.021668] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=50000000 [ 7.021795] systemd[1]: Starting Set Up Additional Binary Formats... [ 7.021816] WCN: marlin_scan_finish! [ 7.021823] sdiohal:probe ok [ 7.021979] sdiohal:scan end! [ 7.021987] WCN: then marlin start to download [ 7.022257] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 [ 7.022272] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! [ 7.029127] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 7.029487] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 7.032823] systemd[1]: Finished Set console font and keymap. [ 7.046131] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 365 (systemd-binfmt) [ 7.052057] systemd[1]: Mounting Arbitrary Executable File Formats File System... [ 7.083231] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data. [ 7.134889] systemd[1]: Finished Coldplug All udev Devices. [ 7.189454] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 7.200737] systemd[1]: Mounted Arbitrary Executable File Formats File System. [ 7.220106] systemd[1]: Finished Set Up Additional Binary Formats. [ 7.250460] systemd[1]: Finished Helper to synchronize boot up for ifupdown. [ 7.311656] systemd[1]: Finished Armbian leds state. [ 7.592733] systemd[1]: Started Rule-based Manager for Device Events and Files. [ 7.600572] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 7.601200] systemd[1]: Started Dispatch Password Requests to Console Directory Watch when bootsplash is active. [ 7.616428] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 7.616576] systemd[1]: Reached target Local Encrypted Volumes. [ 7.674195] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 7.714809] systemd[1]: Starting Load/Save RF Kill Switch Status... [ 7.775762] bluetooth_set_power: start_block=0 [ 7.775792] WCN: start_marlin [MARLIN_BLUETOOTH] [ 7.975324] zram: Added device: zram0 [ 7.975654] zram: Added device: zram1 [ 7.976033] zram: Added device: zram2 [ 8.094917] WCN: combin_img 0 marlin_firmware_write finish and successful [ 8.095242] WCN: marlin_start_run read reset reg val:0x1 [ 8.095250] WCN: after do marlin_start_run reset reg val:0x0 [ 8.095433] WCN: s_marlin_bootup_time=8095432843 [ 8.101544] WCN: clock mode: TSX [ 8.101736] WCN: marlin_write_cali_data sync init_state:0x0 [ 8.132768] WCN: marlin_write_cali_data sync init_state:0x0 [ 8.159666] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1 [ 8.159698] WCN: sdio_config bt_wake_host trigger:[high] [ 8.159701] WCN: sdio_config irq:[inband] [ 8.159703] WCN: sdio_config wake_host_level_duration_time:[20ms] [ 8.159708] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse] [ 8.159710] WCN: marlin_send_sdio_config_to_cp sdio_config:0x80f01 (enable config) [ 8.160558] WCN: marlin_write_cali_data finish [ 8.161314] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.177333] mc: Linux media interface: v0.10 [ 8.190592] panfrost 1800000.gpu: clock rate = 432000000 [ 8.190630] panfrost 1800000.gpu: bus_clock rate = 100000000 [ 8.191105] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0 [ 8.191128] panfrost 1800000.gpu: features: 00000000,10309e40, issues: 00000000,21054400 [ 8.191136] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7 [ 8.191144] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1 [ 8.191541] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.192979] [drm] Initialized panfrost 1.2.0 20180908 for 1800000.gpu on minor 1 [ 8.217760] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.228323] videodev: Linux video capture interface: v2.00 [ 8.248869] zram0: detected capacity change from 0 to 2037304 [ 8.249575] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.279502] systemd[1]: Found device /dev/ttyS0. [ 8.287283] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0 [ 8.287302] WCN: marlin_bind_verify confuse data: 0xe5ae06b9a313020e4477650022a32ad5 [ 8.287317] WCN: marlin_bind_verify verify data: 0xa5ab8048e6a32ce226d910652b504834 [ 8.288057] WCN: check_cp_ready sync val:0xf0f0f0f8, prj_type val:0x0 [ 8.313569] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0 [ 8.313595] sdiohal:sdiohal_runtime_get entry [ 8.317949] WCN: get_cp2_version entry! [ 8.337651] Adding 1018648k swap on /dev/zram0. Priority:5 extents:1 across:1018648k SSFS [ 8.357401] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~ [ 8.358024] WCN: switch_cp2_log - close entry! [ 8.359418] WCN: WCND at cmd read:OK [ 8.359553] WCN: then marlin download finished and run ok [ 8.359585] WCN: start_loopcheck [ 8.359607] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 1 [ 8.359615] WCN: marlin have open, GNSS is closed [ 8.359620] bluetooth_set_power: end_block=0 [ 8.377701] systemd[1]: Started Load/Save RF Kill Switch Status. [ 8.392873] WCN: get_board_ant_num [one_ant] [ 8.392894] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini [ 8.421557] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned. [ 8.426838] cedrus 1c0e000.video-codec: Adding to iommu group 0 [ 8.435265] cedrus 1c0e000.video-codec: Device registered as /dev/video0 [ 8.475450] Registered IR keymap rc-empty [ 8.493733] rc rc0: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0 [ 8.508606] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter [ 8.514745] input: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0/input12 [ 8.515268] sunxi-ir 7040000.ir: initialized sunXi IR driver [ 8.558655] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings. [ 8.571387] zram1: detected capacity change from 0 to 102400 [ 8.589949] systemd[1]: Finished Load Kernel Modules. [ 8.626023] systemd[1]: Starting Apply Kernel Variables... [ 8.701400] systemd[1]: Finished Armbian ZRAM config. [ 8.724623] systemd[1]: Starting Armbian memory supported logging... [ 8.741406] systemd[1]: Finished Apply Kernel Variables. [ 8.759248] systemd[1]: Starting Raise network interfaces... [ 8.928132] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard. Quota mode: none. [ 9.050204] logitech-djreceiver 0003:046D:C52B.0006: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-5101400.usb-1/input2 [ 9.206494] input: Logitech Wireless Device PID:4004 Keyboard as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.2/0003:046D:C52B.0006/0003:046D:4004.0007/input/input13 [ 9.274225] hid-generic 0003:046D:4004.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4004] on usb-5101400.usb-1/input2:1 [ 9.465060] input: Logitech K360 as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.2/0003:046D:C52B.0006/0003:046D:4004.0007/input/input17 [ 9.465977] logitech-hidpp-device 0003:046D:4004.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K360] on usb-5101400.usb-1/input2:1 [ 9.758059] systemd[1]: Finished Raise network interfaces. [ 9.909199] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 9.909534] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 9.909890] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 9.913981] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 9.914092] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 9.914197] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 9.914269] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 9.998835] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 9.999036] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 9.999099] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 9.999176] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 9.999275] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 9.999378] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 11.570712] systemd[1]: Finished Armbian memory supported logging. [ 11.580348] systemd[1]: Starting Journal Service... [ 11.722747] systemd[1]: Started Journal Service. [ 11.751364] systemd-journald[691]: Received client request to flush runtime journal. ### armbian-release: # PLEASE DO NOT EDIT THIS FILE BOARD=orangepi3-lts BOARD_NAME="Orange Pi 3 LTS" BOARDFAMILY=sun50iw6 BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=13f5fba13c VERSION=22.05.3 LINUXFAMILY=sunxi64 ARCH=arm64 IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=stable BRANCH=current ### boot environment: verbosity=1 bootlogo=false console=both disp_mode=1920x1080p60 overlay_prefix=sun50i-h6 rootdev=UUID=71b44a6c-5bb8-4352-afe7-d22b8e62de4c rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u ### lsusb: Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ### lscpu: Architecture: aarch64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Vendor ID: ARM Model name: Cortex-A53 Model: 4 Thread(s) per core: 1 Core(s) per cluster: 4 Socket(s): - Cluster(s): 1 Stepping: r0p4 CPU max MHz: 1800.0000 CPU min MHz: 480.0000 BogoMIPS: 48.00 Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid NUMA node(s): 1 NUMA node0 CPU(s): 0-3 Vulnerability Itlb multihit: Not affected Vulnerability L1tf: Not affected Vulnerability Mds: Not affected Vulnerability Meltdown: Not affected Vulnerability Mmio stale data: Not affected Vulnerability Spec store bypass: Not affected Vulnerability Spectre v1: Mitigation; __user pointer sanitization Vulnerability Spectre v2: Not affected Vulnerability Srbds: Not affected Vulnerability Tsx async abort: Not affected ### cpuinfo: processor : 0 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 1 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 2 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 3 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 ### meminfo: MemTotal: 2037300 kB MemFree: 1845816 kB MemAvailable: 1851728 kB Buffers: 12532 kB Cached: 53568 kB SwapCached: 0 kB Active: 32208 kB Inactive: 52908 kB Active(anon): 444 kB Inactive(anon): 22100 kB Active(file): 31764 kB Inactive(file): 30808 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 1018648 kB SwapFree: 1018648 kB Dirty: 3392 kB Writeback: 0 kB AnonPages: 19056 kB Mapped: 16768 kB Shmem: 3388 kB KReclaimable: 10580 kB Slab: 45824 kB SReclaimable: 10580 kB SUnreclaim: 35244 kB KernelStack: 2464 kB PageTables: 1652 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2037296 kB Committed_AS: 42432 kB VmallocTotal: 133143592960 kB VmallocUsed: 22700 kB VmallocChunk: 0 kB Percpu: 976 kB AnonHugePages: 0 kB ShmemHugePages: 0 kB ShmemPmdMapped: 0 kB FileHugePages: 0 kB FilePmdMapped: 0 kB CmaTotal: 131072 kB CmaFree: 128768 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB Hugetlb: 0 kB ### virtual memory: vm.admin_reserve_kbytes = 8192 vm.compaction_proactiveness = 20 vm.compact_unevictable_allowed = 1 vm.dirty_background_bytes = 0 vm.dirty_background_ratio = 10 vm.dirty_bytes = 0 vm.dirty_expire_centisecs = 3000 vm.dirty_ratio = 20 vm.dirtytime_expire_seconds = 43200 vm.dirty_writeback_centisecs = 500 vm.extfrag_threshold = 500 vm.hugetlb_shm_group = 0 vm.laptop_mode = 0 vm.legacy_va_layout = 0 vm.lowmem_reserve_ratio = 256 256 32 0 vm.max_map_count = 65530 vm.min_free_kbytes = 22528 vm.min_slab_ratio = 5 vm.min_unmapped_ratio = 1 vm.mmap_min_addr = 32768 vm.mmap_rnd_bits = 18 vm.mmap_rnd_compat_bits = 11 vm.nr_hugepages = 0 vm.nr_hugepages_mempolicy = 0 vm.nr_overcommit_hugepages = 0 vm.numa_stat = 1 vm.numa_zonelist_order = Node vm.oom_dump_tasks = 1 vm.oom_kill_allocating_task = 0 vm.overcommit_kbytes = 0 vm.overcommit_memory = 0 vm.overcommit_ratio = 50 vm.page-cluster = 0 vm.page_lock_unfairness = 5 vm.panic_on_oom = 0 vm.percpu_pagelist_high_fraction = 0 vm.stat_interval = 1 vm.swappiness = 100 vm.user_reserve_kbytes = 63004 vm.vfs_cache_pressure = 100 vm.watermark_boost_factor = 15000 vm.watermark_scale_factor = 10 vm.zone_reclaim_mode = 0 ### ip addr: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 02:07:29:30:86:8c brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:32:c3:9f:6a:08 brd ff:ff:ff:ff:ff:ff ### partitions: major minor #blocks name 179 0 31205376 mmcblk0 179 1 30879744 mmcblk0p1 179 32 7634944 mmcblk2 252 0 1018652 zram0 252 1 51200 zram1 ### df: tmpfs 199M 3.4M 196M 2% /run /dev/mmcblk0p1 29G 5.1G 24G 18% / tmpfs 995M 0 995M 0% /dev/shm tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 995M 0 995M 0% /tmp /dev/zram1 47M 3.3M 41M 8% /var/log ### lsblk: NAME FSTYPE SIZE MOUNTPOINT UUID mmcblk0 29.8G └─mmcblk0p1 ext4 29.4G / 71b44a6c-5bb8-4352-afe7-d22b8e62de4c mmcblk2 swap 7.3G 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 mmcblk2boot0 swap 4M 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 mmcblk2boot1 swap 4M 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 zram1 50M /var/log zram2 0B ### zramctl: NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram1 zstd 50M 68K 728B 44K 4 /var/log /dev/zram0 lzo-rle 994.8M 4K 74B 12K 4 [SWAP] ### mtab: /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 ### mmc0:0001 info: fwrev: 0x0 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=USD MODALIAS=mmc:block cid: 1d414455534400001000005ae0016181 rca: 0x0001 csd: 400e00325b590000ee137f800a40004d manfid: 0x00001d ocr: 0x00200000 preferred_erase_size: 4194304 type: SD hwrev: 0x1 date: 01/2022 dsr: 0x404 erase_size: 512 oemid: 0x4144 serial: 0x00005ae0 ssr: 000000000500000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 scr: 02b5808200000000 name: USD ### mmc2:0001 info: fwrev: 0x0600000000000000 uevent: DRIVER=mmcblk MMC_TYPE=MMC MMC_NAME=8GTF4R MODALIAS=mmc:block cid: 15010038475446345206d410e21fc801 rel_sectors: 0x1 enhanced_rpmb_supported: 0x1 rca: 0x0001 pre_eol_info: 0x01 csd: d02701320f5903fff6dbffef8e40400d manfid: 0x000015 ocr: 0x00200000 preferred_erase_size: 4194304 enhanced_area_offset: 18446744073709551594 raw_rpmb_size_mult: 0x4 type: MMC hwrev: 0x0 date: 12/2021 prv: 0x6 ffu_capable: 1 dsr: 0x404 erase_size: 524288 life_time: 0x01 0x01 enhanced_area_size: 4294967274 oemid: 0x0100 serial: 0xd410e21f cmdq_en: 0 rev: 0x8 name: 8GTF4R ### Boot system health: Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 07:44:50: 1704MHz 1.34 47% 20% 14% 0% 12% 0% 59.7°C 0/9 07:44:51: 1320MHz 1.34 11% 6% 3% 1% 0% 0% 59.7°C 0/9 07:44:51: 1080MHz 1.34 18% 11% 4% 1% 0% 0% 55.4°C 0/9 07:44:52: 1080MHz 1.34 11% 7% 2% 1% 0% 0% 54.6°C 0/9 07:44:52: 1080MHz 1.34 19% 15% 2% 0% 0% 0% 54.6°C 0/9

I've also got this issue with my Orange Pi Zero 2 with the wifi interface missing/not working. Freshly installed 22.05 Jammy and no wifi interface. Tried sudo apt update && sudo apt dist-upgrade with no success. Any ideas? # nmcli device show GENERAL.DEVICE: eth0 GENERAL.TYPE: ethernet GENERAL.HWADDR: 02:00:9E:C4:55:73 GENERAL.MTU: 1500 GENERAL.STATE: 100 (connected) GENERAL.CONNECTION: Wired connection 1 GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/1 WIRED-PROPERTIES.CARRIER: on IP4.ADDRESS[1]: 10.11.12.240/24 IP4.GATEWAY: 10.11.12.1 IP4.ROUTE[1]: dst = 10.11.12.0/24, nh = 0.0.0.0, mt = 100 IP4.ROUTE[2]: dst = 0.0.0.0/0, nh = 10.11.12.1, mt = 100 IP4.ROUTE[3]: dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000 IP4.DNS[1]: 10.11.12.1 IP4.DOMAIN[1]: kinetica.local IP6.ADDRESS[1]: fe80::1d5f:6229:2c27:b347/64 IP6.GATEWAY: -- IP6.ROUTE[1]: dst = fe80::/64, nh = ::, mt = 1024 GENERAL.DEVICE: lo GENERAL.TYPE: loopback GENERAL.HWADDR: 00:00:00:00:00:00 GENERAL.MTU: 65536 GENERAL.STATE: 10 (unmanaged) GENERAL.CONNECTION: -- GENERAL.CON-PATH: -- IP4.ADDRESS[1]: 127.0.0.1/8 IP4.GATEWAY: -- IP6.ADDRESS[1]: ::1/128 IP6.GATEWAY: -- IP6.ROUTE[1]: dst = ::1/128, nh = ::, mt = 256 dmesg output: dmesg [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 5.15.48-sunxi64 (root@4e78f881a143) (aarch64-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 8.3.0, GNU ld (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) 2.32.0.20190321) #22.05.3 SMP Wed Jun 22 07:33:24 UTC 2022 [ 0.000000] Machine model: OrangePi Zero2 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x7fdde100-0x7fddffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000004007ffff] [ 0.000000] node 0: [mem 0x0000000040080000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] cma: Reserved 128 MiB at 0x0000000076c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 19 pages/cpu s37144 r8192 d32488 u77824 [ 0.000000] pcpu-alloc: s37144 r8192 d32488 u77824 alloc=19*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: root=UUID=f3d154d3-f330-4f4c-8700-e85ffc6a9066 rootwait rootfstype=ext4 console=ttyS0,115200 consoleblank=0 loglevel=1 ubootpart=20f2faab-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u cgroup_enable=memory swapaccount=1 [ 0.000000] Unknown kernel command line parameters "ubootpart=20f2faab-01 cgroup_enable=memory", will be passed to user space. [ 0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes [ 0.000000] printk: log_buf_len min size: 16384 bytes [ 0.000000] printk: log_buf_len: 32768 bytes [ 0.000000] printk: early log buf free: 14112(86%) [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 862024K/1048576K available (13504K kernel code, 1068K rwdata, 4164K rodata, 2496K init, 321K bss, 55480K reserved, 131072K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000389] Console: colour dummy device 80x25 [ 0.000475] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.000489] pid_max: default: 32768 minimum: 301 [ 0.000562] LSM: Security Framework initializing [ 0.000588] Yama: becoming mindful. [ 0.000676] AppArmor: AppArmor initialized [ 0.000774] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.000788] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.002518] rcu: Hierarchical SRCU implementation. [ 0.003706] smp: Bringing up secondary CPUs ... [ 0.004278] Detected VIPT I-cache on CPU1 [ 0.004357] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.004967] Detected VIPT I-cache on CPU2 [ 0.005031] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.005602] Detected VIPT I-cache on CPU3 [ 0.005663] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.005762] smp: Brought up 1 node, 4 CPUs [ 0.005777] SMP: Total of 4 processors activated. [ 0.005783] CPU features: detected: 32-bit EL0 Support [ 0.005789] CPU features: detected: CRC32 instructions [ 0.017816] CPU: All CPU(s) started at EL2 [ 0.017857] alternatives: patching kernel code [ 0.019230] devtmpfs: initialized [ 0.023403] Registered cp15_barrier emulation handler [ 0.023428] Registered setend emulation handler [ 0.023602] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.023623] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.027981] pinctrl core: initialized pinctrl subsystem [ 0.029340] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.030834] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.030985] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.031105] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.031176] audit: initializing netlink subsys (disabled) [ 0.031409] audit: type=2000 audit(0.028:1): state=initialized audit_enabled=0 res=1 [ 0.031970] thermal_sys: Registered thermal governor 'fair_share' [ 0.031979] thermal_sys: Registered thermal governor 'bang_bang' [ 0.031984] thermal_sys: Registered thermal governor 'step_wise' [ 0.031988] thermal_sys: Registered thermal governor 'user_space' [ 0.032509] cpuidle: using governor menu [ 0.032710] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.032805] ASID allocator initialised with 65536 entries [ 0.033016] Serial: AMBA PL011 UART driver [ 0.045861] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.045884] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.045890] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.045897] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.047681] cryptd: max_cpu_qlen set to 1000 [ 0.116343] raid6: neonx8 gen() 1796 MB/s [ 0.184408] raid6: neonx8 xor() 1347 MB/s [ 0.252484] raid6: neonx4 gen() 1844 MB/s [ 0.320551] raid6: neonx4 xor() 1334 MB/s [ 0.388623] raid6: neonx2 gen() 1750 MB/s [ 0.456692] raid6: neonx2 xor() 1226 MB/s [ 0.524776] raid6: neonx1 gen() 1522 MB/s [ 0.592837] raid6: neonx1 xor() 1047 MB/s [ 0.660905] raid6: int64x8 gen() 1253 MB/s [ 0.728982] raid6: int64x8 xor() 659 MB/s [ 0.797053] raid6: int64x4 gen() 1394 MB/s [ 0.865124] raid6: int64x4 xor() 708 MB/s [ 0.933212] raid6: int64x2 gen() 1188 MB/s [ 1.001268] raid6: int64x2 xor() 629 MB/s [ 1.069362] raid6: int64x1 gen() 886 MB/s [ 1.137418] raid6: int64x1 xor() 460 MB/s [ 1.137424] raid6: using algorithm neonx4 gen() 1844 MB/s [ 1.137429] raid6: .... xor() 1334 MB/s, rmw enabled [ 1.137434] raid6: using neon recovery algorithm [ 1.138375] iommu: Default domain type: Translated [ 1.138394] iommu: DMA domain TLB invalidation policy: strict mode [ 1.138715] SCSI subsystem initialized [ 1.138926] usbcore: registered new interface driver usbfs [ 1.138962] usbcore: registered new interface driver hub [ 1.138999] usbcore: registered new device driver usb [ 1.139246] pps_core: LinuxPPS API ver. 1 registered [ 1.139252] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.139267] PTP clock support registered [ 1.139673] ARM FF-A: FFA_VERSION returned not supported [ 1.140036] Advanced Linux Sound Architecture Driver Initialized. [ 1.140678] NetLabel: Initializing [ 1.140688] NetLabel: domain hash size = 128 [ 1.140693] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.140761] NetLabel: unlabeled traffic allowed by default [ 1.141280] clocksource: Switched to clocksource arch_sys_counter [ 1.141564] VFS: Disk quotas dquot_6.6.0 [ 1.141625] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.142206] AppArmor: AppArmor Filesystem Enabled [ 1.148057] NET: Registered PF_INET protocol family [ 1.148239] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.149045] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 1.149078] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.149094] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.149165] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 1.149318] TCP: Hash tables configured (established 8192 bind 8192) [ 1.149454] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.149491] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.149683] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.150230] Trying to unpack rootfs image as initramfs... [ 1.158937] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 1.165069] Initialise system trusted keyrings [ 1.165148] Key type blacklist registered [ 1.165472] workingset: timestamp_bits=44 max_order=18 bucket_order=0 [ 1.170781] zbud: loaded [ 1.172252] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.174720] integrity: Platform Keyring initialized [ 1.217670] xor: automatically using best checksumming function 32regs [ 1.217696] async_tx: api initialized (async) [ 1.217706] Key type asymmetric registered [ 1.217711] Asymmetric key parser 'x509' registered [ 1.217847] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.218052] io scheduler mq-deadline registered [ 1.218062] io scheduler kyber registered [ 1.218250] io scheduler bfq registered [ 1.227034] sun50i-h616-pinctrl 300b000.pinctrl: initialized sunXi PIO driver [ 1.227920] sun50i-h616-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver [ 1.230576] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 1.232236] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator [ 1.232867] printk: console [ttyS0] disabled [ 1.232963] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 32, base_baud = 1500000) is a 16550A [ 1.233111] printk: console [ttyS0] enabled [ 1.235747] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.240584] loop: module loaded [ 1.241538] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pc not found, using dummy regulator [ 1.241843] sun6i-spi 5010000.spi: Failed to request TX DMA channel [ 1.241860] sun6i-spi 5010000.spi: Failed to request RX DMA channel [ 1.242463] spi-nor spi0.0: supply vdd not found, using dummy regulator [ 1.257595] spi-nor spi0.0: mx25l1606e (2048 Kbytes) [ 1.794616] Freeing initrd memory: 12684K [ 1.804569] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.804620] ehci-platform: EHCI generic platform driver [ 1.804708] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.804719] ohci-platform: OHCI generic platform driver [ 1.804976] usbcore: registered new interface driver usb-storage [ 1.805442] mousedev: PS/2 mouse device common for all mice [ 1.806342] sun6i-rtc 7000000.rtc: registered as rtc0 [ 1.806383] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-02T00:00:04 UTC (86404) [ 1.806489] sun6i-rtc 7000000.rtc: RTC enabled [ 1.806588] i2c_dev: i2c /dev entries driver [ 1.807140] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.808450] sdhci: Secure Digital Host Controller Interface driver [ 1.808470] sdhci: Copyright(c) Pierre Ossman [ 1.808497] Synopsys Designware Multimedia Card Interface Driver [ 1.808865] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.809667] ledtrig-cpu: registered to indicate activity on CPUs [ 1.810016] SMCCC: SOC_ID: ID = jep106:091e:1823 Revision = 0x00000000 [ 1.810281] hid: raw HID events driver (C) Jiri Kosina [ 1.810410] usbcore: registered new interface driver usbhid [ 1.810416] usbhid: USB HID core driver [ 1.819847] NET: Registered PF_INET6 protocol family [ 1.848690] Segment Routing with IPv6 [ 1.848773] In-situ OAM (IOAM) with IPv6 [ 1.848861] NET: Registered PF_PACKET protocol family [ 1.849006] 8021q: 802.1Q VLAN Support v1.8 [ 1.849159] 9pnet: Installing 9P2000 support [ 1.849244] Key type dns_resolver registered [ 1.849736] registered taskstats version 1 [ 1.849755] Loading compiled-in X.509 certificates [ 1.853383] Loaded X.509 cert 'Build time autogenerated kernel key: 32330adefd2da02e444296fafd37464380789679' [ 1.856115] zswap: loaded using pool zstd/z3fold [ 1.856874] Key type ._fscrypt registered [ 1.856893] Key type .fscrypt registered [ 1.856897] Key type fscrypt-provisioning registered [ 1.857954] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no [ 1.871728] Key type encrypted registered [ 1.871762] AppArmor: AppArmor sha1 policy hashing enabled [ 1.871807] ima: No TPM chip found, activating TPM-bypass! [ 1.871846] ima: Allocated hash algorithm: sha1 [ 1.871881] ima: No architecture policies found [ 1.871959] evm: Initialising EVM extended attributes: [ 1.871963] evm: security.selinux [ 1.871968] evm: security.SMACK64 [ 1.871971] evm: security.SMACK64EXEC [ 1.871975] evm: security.SMACK64TRANSMUTE [ 1.871979] evm: security.SMACK64MMAP [ 1.871982] evm: security.apparmor [ 1.871986] evm: security.ima [ 1.871990] evm: security.capability [ 1.871994] evm: HMAC attrs: 0x1 [ 1.881081] usb1-vbus: supplied by vcc-5v [ 1.881360] sun50i-h616-r-pinctrl 7022000.pinctrl: supply vcc-pl not found, using dummy regulator [ 1.881667] sunxi-rsb 7083000.rsb: RSB running at 3000000 Hz [ 1.881976] axp20x-rsb sunxi-rsb-745: AXP20x variant AXP806 found [ 1.882410] vdd-cpu: supplied by vcc-5v [ 1.882750] dcdcb: supplied by vcc-5v [ 1.882871] vdd-gpu-sys: supplied by vcc-5v [ 1.883122] vdd-dram: supplied by vcc-5v [ 1.883339] vcc-eth-mmc: supplied by vcc-5v [ 1.883545] vcc-sys: supplied by vcc-5v [ 1.883766] vcc3v3-ext: supplied by vcc-5v [ 1.883969] vcc3v3-ext2: supplied by vcc-5v [ 1.884177] vcc1v8: supplied by vcc-5v [ 1.884517] bldo2: supplied by vcc-5v [ 1.884712] bldo3: supplied by vcc-5v [ 1.884936] bldo4: supplied by vcc-5v [ 1.885127] cldo1: supplied by vcc-5v [ 1.885364] cldo2: supplied by vcc-5v [ 1.885595] cldo3: supplied by vcc-5v [ 1.885788] sw: supplied by regulator-dummy [ 1.885897] axp20x-rsb sunxi-rsb-745: AXP20X driver loaded [ 1.887583] ehci-platform 5200000.usb: EHCI Host Controller [ 1.887622] ehci-platform 5200000.usb: new USB bus registered, assigned bus number 1 [ 1.887745] ehci-platform 5200000.usb: irq 36, io mem 0x05200000 [ 1.901280] ehci-platform 5200000.usb: USB 2.0 started, EHCI 1.00 [ 1.901585] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.901600] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.901609] usb usb1: Product: EHCI Host Controller [ 1.901617] usb usb1: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd [ 1.901624] usb usb1: SerialNumber: 5200000.usb [ 1.902186] hub 1-0:1.0: USB hub found [ 1.902229] hub 1-0:1.0: 1 port detected [ 1.903147] ohci-platform 5200400.usb: Generic Platform OHCI controller [ 1.903180] ohci-platform 5200400.usb: new USB bus registered, assigned bus number 2 [ 1.903314] ohci-platform 5200400.usb: irq 37, io mem 0x05200400 [ 1.965510] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 1.965531] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.965540] usb usb2: Product: Generic Platform OHCI controller [ 1.965548] usb usb2: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd [ 1.965555] usb usb2: SerialNumber: 5200400.usb [ 1.966072] hub 2-0:1.0: USB hub found [ 1.966117] hub 2-0:1.0: 1 port detected [ 1.967116] usb_phy_generic usb_phy_generic.1.auto: supply vcc not found, using dummy regulator [ 1.967262] usb_phy_generic usb_phy_generic.1.auto: dummy supplies not allowed for exclusive requests [ 1.970613] of_cfs_init [ 1.970730] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator [ 1.970751] of_cfs_init: OK [ 1.971047] ALSA device list: [ 1.971054] No soundcards found. [ 1.971666] sunxi-mmc 4020000.mmc: Got CD GPIO [ 1.997286] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 1.998324] Freeing unused kernel memory: 2496K [ 1.998451] Run /init as init process [ 1.998457] with arguments: [ 1.998462] /init [ 1.998467] with environment: [ 1.998471] HOME=/ [ 1.998476] TERM=linux [ 1.998480] ubootpart=20f2faab-01 [ 1.998485] cgroup_enable=memory [ 2.032561] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.034531] mmc0: new high speed SDHC card at address 0001 [ 2.035536] mmcblk0: mmc0:0001 SD16G 29.1 GiB [ 2.038006] mmcblk0: p1 [ 2.344202] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pi not found, using dummy regulator [ 2.344610] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found [ 2.344640] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found [ 2.345066] dwmac-sun8i 5020000.ethernet: supply phy-io not found, using dummy regulator [ 2.345543] dwmac-sun8i 5020000.ethernet: PTP uses main clock [ 2.345605] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 51fe6 (expect 50000) [ 2.347133] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported [ 2.347164] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported [ 2.347171] dwmac-sun8i 5020000.ethernet: COE Type 2 [ 2.347181] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported [ 2.347188] dwmac-sun8i 5020000.ethernet: Normal descriptors [ 2.347195] dwmac-sun8i 5020000.ethernet: Chain mode enabled [ 2.856167] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null). Quota mode: none. [ 3.688720] systemd[1]: System time before build time, advancing clock. [ 3.733020] systemd[1]: systemd 249.11-0ubuntu3.3 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 3.733820] systemd[1]: Detected architecture arm64. [ 3.757882] systemd[1]: Hostname set to <opizero2>. [ 4.813879] systemd[1]: Queued start job for default target Graphical Interface. [ 4.816062] random: systemd: uninitialized urandom read (16 bytes read) [ 4.820142] systemd[1]: Created slice Slice /system/modprobe. [ 4.837548] random: systemd: uninitialized urandom read (16 bytes read) [ 4.839629] systemd[1]: Created slice Slice /system/serial-getty. [ 4.857533] random: systemd: uninitialized urandom read (16 bytes read) [ 4.859249] systemd[1]: Created slice User and Session Slice. [ 4.873601] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped. [ 4.874141] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 4.894592] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 4.913776] systemd[1]: Reached target Local Encrypted Volumes. [ 4.929985] systemd[1]: Reached target Slice Units. [ 4.945620] systemd[1]: Reached target Swaps. [ 4.961608] systemd[1]: Reached target System Time Set. [ 4.977791] systemd[1]: Reached target Local Verity Protected Volumes. [ 5.012430] systemd[1]: Listening on RPCbind Server Activation Socket. [ 5.030377] systemd[1]: Listening on Syslog Socket. [ 5.046329] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.065927] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 5.082796] systemd[1]: Listening on Journal Audit Socket. [ 5.098257] systemd[1]: Listening on Journal Socket (/dev/log). [ 5.114428] systemd[1]: Listening on Journal Socket. [ 5.130672] systemd[1]: Listening on udev Control Socket. [ 5.146238] systemd[1]: Listening on udev Kernel Socket. [ 5.161661] systemd[1]: Reached target Socket Units. [ 5.181899] systemd[1]: Mounting Huge Pages File System... [ 5.201847] systemd[1]: Mounting POSIX Message Queue File System... [ 5.221482] systemd[1]: Mounting NFSD configuration filesystem... [ 5.241984] systemd[1]: Mounting Kernel Debug File System... [ 5.258083] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 5.258813] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 5.265880] systemd[1]: Starting Restore / save the current clock... [ 5.286607] systemd[1]: Starting Set the console keyboard layout... [ 5.307757] systemd[1]: Starting Create List of Static Device Nodes... [ 5.317303] RPC: Registered named UNIX socket transport module. [ 5.317326] RPC: Registered udp transport module. [ 5.317330] RPC: Registered tcp transport module. [ 5.317334] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 5.332257] systemd[1]: Starting Load Kernel Module configfs... [ 5.352014] systemd[1]: Starting Load Kernel Module drm... [ 5.371120] systemd[1]: Starting Load Kernel Module fuse... [ 5.390484] systemd[1]: Started Nameserver information manager. [ 5.410962] systemd[1]: Reached target Preparation for Network. [ 5.415633] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 5.426224] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 5.431621] fuse: init (API version 7.34) [ 5.437049] systemd[1]: Starting Load Kernel Modules... [ 5.462972] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.487051] systemd[1]: Starting Coldplug All udev Devices... [ 5.491932] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none. [ 5.512661] systemd[1]: Mounted Huge Pages File System. [ 5.530392] systemd[1]: Mounted POSIX Message Queue File System. [ 5.546463] systemd[1]: Mounted NFSD configuration filesystem. [ 5.566304] systemd[1]: Mounted Kernel Debug File System. [ 5.587466] systemd[1]: Finished Restore / save the current clock. [ 5.607542] systemd[1]: Finished Create List of Static Device Nodes. [ 5.627129] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 5.628544] systemd[1]: Finished Load Kernel Module configfs. [ 5.647273] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 5.648421] systemd[1]: Finished Load Kernel Module drm. [ 5.667701] systemd[1]: Finished Set the console keyboard layout. [ 5.687011] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 5.688141] systemd[1]: Finished Load Kernel Module fuse. [ 5.713026] systemd[1]: Finished Load Kernel Modules. [ 5.731389] systemd[1]: Finished Remount Root and Kernel File Systems. [ 5.760617] systemd[1]: Mounting FUSE Control File System... [ 5.777951] systemd[1]: Mounting Kernel Configuration File System... [ 5.793773] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 5.798674] systemd[1]: Starting Load/Save Random Seed... [ 5.819023] systemd[1]: Starting Apply Kernel Variables... [ 5.834021] urandom_read_iter: 37 callbacks suppressed [ 5.834048] random: systemd: uninitialized urandom read (16 bytes read) [ 5.839813] systemd[1]: Starting Create System Users... [ 5.859391] random: systemd: uninitialized urandom read (16 bytes read) [ 5.861050] systemd[1]: Mounted FUSE Control File System. [ 5.878373] systemd[1]: Mounted Kernel Configuration File System. [ 5.905710] systemd[1]: Finished Create System Users. [ 5.923665] systemd[1]: Finished Apply Kernel Variables. [ 5.930613] random: systemd: uninitialized urandom read (16 bytes read) [ 5.935169] systemd[1]: Starting Create Static Device Nodes in /dev... [ 5.952070] systemd[1]: Finished Coldplug All udev Devices. [ 5.977725] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 6.001161] systemd[1]: Finished Create Static Device Nodes in /dev. [ 6.019514] systemd[1]: Finished Helper to synchronize boot up for ifupdown. [ 6.038192] systemd[1]: Reached target Preparation for Local File Systems. [ 6.063055] systemd[1]: Mounting /tmp... [ 6.088804] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 6.113969] systemd[1]: Mounted /tmp. [ 6.126186] systemd[1]: Reached target Local File Systems. [ 6.151096] systemd[1]: Starting Armbian leds state... [ 6.171565] systemd[1]: Starting Armbian ZRAM config... [ 6.193819] systemd[1]: Starting Set console font and keymap... [ 6.215159] systemd[1]: Starting Raise network interfaces... [ 6.229768] systemd[1]: Condition check resulted in RPC security service for NFS server being skipped. [ 6.230031] systemd[1]: Condition check resulted in Mark the need to relabel after reboot being skipped. [ 6.236015] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.239201] systemd[1]: Finished Set console font and keymap. [ 6.291766] systemd[1]: Finished Armbian leds state. [ 6.513075] systemd[1]: Started Rule-based Manager for Device Events and Files. [ 6.714389] zram: Added device: zram0 [ 6.715123] zram: Added device: zram1 [ 6.715947] zram: Added device: zram2 [ 6.840664] urandom_read_iter: 16 callbacks suppressed [ 6.840692] random: systemd: uninitialized urandom read (16 bytes read) [ 6.840799] random: systemd: uninitialized urandom read (16 bytes read) [ 6.851076] random: systemd: uninitialized urandom read (16 bytes read) [ 6.893506] systemd[1]: Found device /dev/ttyS0. [ 6.990383] mc: Linux media interface: v0.10 [ 7.049772] systemd[1]: Reached target Hardware activated USB gadget. [ 7.068215] panfrost 1800000.gpu: clock rate = 432000000 [ 7.068260] panfrost 1800000.gpu: bus_clock rate = 200000000 [ 7.068843] panfrost 1800000.gpu: mali-g31 id 0x7093 major 0x0 minor 0x0 status 0x0 [ 7.068875] panfrost 1800000.gpu: features: 00000000,3fde77ff, issues: 00000000,00000400 [ 7.068885] panfrost 1800000.gpu: Features: L2:0x07100206 Shader:0x00000000 Tiler:0x00000209 Mem:0x1 MMU:0x00002821 AS:0xff JS:0x7 [ 7.068897] panfrost 1800000.gpu: shader_present=0x1 l2_present=0x1 [ 7.085549] [drm] Initialized panfrost 1.2.0 20180908 for 1800000.gpu on minor 0 [ 7.089368] random: crng init done [ 7.089391] random: 18 urandom warning(s) missed due to ratelimiting [ 7.096835] videodev: Linux video capture interface: v2.00 [ 7.106044] zram0: detected capacity change from 0 to 1008280 [ 7.243978] systemd[1]: Finished Load/Save Random Seed. [ 7.263957] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 7.264130] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 7.264280] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 7.288828] Adding 504136k swap on /dev/zram0. Priority:5 extents:1 across:504136k SSFS [ 7.321618] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned. [ 7.324128] cedrus 1c0e000.video-codec: Device registered as /dev/video0 [ 7.450401] zram1: detected capacity change from 0 to 102400 [ 7.466733] systemd[1]: Finished Raise network interfaces. [ 7.517913] systemd[1]: Finished Armbian ZRAM config. [ 7.538417] systemd[1]: Starting Armbian memory supported logging... [ 7.609652] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard. Quota mode: none. [ 10.304223] systemd[1]: Finished Armbian memory supported logging. [ 10.333651] systemd[1]: Starting Journal Service... [ 10.483330] systemd[1]: Started Journal Service. [ 10.532718] systemd-journald[563]: Received client request to flush runtime journal. [ 14.451987] NFSD: Using nfsdcld client tracking operations. [ 14.452018] NFSD: no clients to reclaim, skipping NFSv4 grace period (net f0000000) [ 15.316571] phy_rtl8211f_led_fixup in [ 15.409424] dwmac-sun8i 5020000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL) [ 15.410486] dwmac-sun8i 5020000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 [ 15.411318] dwmac-sun8i 5020000.ethernet eth0: No Safety Features support found [ 15.411352] dwmac-sun8i 5020000.ethernet eth0: No MAC Management Counters available [ 15.411360] dwmac-sun8i 5020000.ethernet eth0: PTP not supported by HW [ 15.411982] dwmac-sun8i 5020000.ethernet eth0: configuring for phy/rgmii link mode [ 19.526729] dwmac-sun8i 5020000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 19.526791] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 33.766093] cldo1: disabling

Description GPU governor for rk3399 (Mali T860, Panfrost driver) was set to “performance” 4 years ago due to issues with simple_ondemand; nowadays simple_ondemand works just fine. This fix makes my board (Orange PI 4 LTS) consume ~25mA (125mW) less current and obviously makes soc fresher. Jira reference number AR-1246 How Has This Been Tested? [x] Tested setting simple_ondemand manually on official Ubuntu Jammy XFCE image [x] Built Ubuntu Jammy XFCE image from scratch Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Ok here's a new version, 5.18-rc7 from tobetter's tree. Still very early days. tobetter is doing a fantastic job this time around, keeping his tree rebased properly this time. This version has working NVMe (!), panfrost somewhat works, some hangs when panfrost is used. eMMC does NOT work in my experience, it hangs the machine if trying to use it. use SD card. unzstd, burn to SD, boot either with or without holding the button. (it should NOT go into or through Petitboot either way, instead the SPL in SPI should find and boot uboot in the SD card, or with button boot all blobs from SD). https://github.com/rpardini/armbian-release/releases/download/20220522c/Armbian_20220522c-rpardini_Odroidm1_jammy_edge_5.18.0.img.zst (4.x stuff still does not have HDMI, I've no idea why, it's otherwise stable, but I won't post it here since most people just assume it does not work at all if HDMI does not work)

even though I disabled DVFS : $ cat /etc/default/cpufrequtils ENABLE="true" GOVERNOR=conservative MAX_SPEED=1416000 MIN_SPEED=1416000 I had a few random reboot. I disabled zswap and , since I get this kind of trace about it: mars 30 22:15:29 helios64 kernel: ------------[ cut here ]------------ mars 30 22:15:29 helios64 kernel: kernel BUG at mm/zswap.c:1313! mars 30 22:15:29 helios64 kernel: Internal error: Oops - BUG: 0 [#1] PREEMPT SMP mars 30 22:15:29 helios64 kernel: Modules linked in: binfmt_misc softdog veth xt_nat xt_tcpudp xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 bpfilter br_netfilter bridge governor_performance aufs zram quota_v2 quota_tree ftdi_sio r8152 usbserial snd_soc_hdmi_codec leds_pwm snd_soc_rockchip_i2s snd_soc_rockchip_pcm gpio_charger pwm_fan snd_soc_core panfrost gpu_sched snd_pcm_dmaengine snd_pcm snd_timer snd hantro_vpu(C) soundcore rockchip_vdec(C) rockchip_rga rockchip_iep v4l2_h264 fusb302 videobuf2_dma_contig sg videobuf2_vmalloc v4l2_mem2mem videobuf2_dma_sg tcpm videobuf2_memops videobuf2_v4l2 videobuf2_common typec videodev mc gpio_beeper cpufreq_dt nfsd dm_mod auth_rpcgss nfs_acl lockd grace sunrpc ledtrig_netdev lm75 ip_tables x_tables autofs4 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx raid1 raid0 multipath linear realtek raid10 uas dwmac_rk stmmac_platform mars 30 22:15:29 helios64 kernel: md_mod stmmac pcs_xpcs adc_keys mars 30 22:15:29 helios64 kernel: CPU: 4 PID: 3214 Comm: containerd-shim Tainted: G C 5.15.29-rockchip64 #trunk.0010 mars 30 22:15:29 helios64 kernel: Hardware name: Helios64 (DT) mars 30 22:15:29 helios64 kernel: pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) mars 30 22:15:29 helios64 kernel: pc : zswap_frontswap_load+0x320/0x330 mars 30 22:15:29 helios64 kernel: lr : zswap_frontswap_load+0x218/0x330 mars 30 22:15:29 helios64 kernel: sp : ffff80000e363b10 mars 30 22:15:29 helios64 kernel: x29: ffff80000e363b10 x28: 000000000000094b x27: ffff0000f5526080 mars 30 22:15:29 helios64 kernel: x26: ffff800009b3d700 x25: 0000000000002690 x24: 00000000ffffffea mars 30 22:15:29 helios64 kernel: x23: ffff00000f2e9980 x22: ffff00000f2e9988 x21: ffff8000094f49c8 mars 30 22:15:29 helios64 kernel: x20: fffffbffeffcb170 x19: ffff00003319e4d0 x18: 00000000000000ff mars 30 22:15:29 helios64 kernel: x17: 00000000ffffffff x16: 0000000000000001 x15: 5165ca840ace4dcb mars 30 22:15:29 helios64 kernel: x14: ffff80000b7e257e x13: ffff80000b7e257e x12: 0000000000000001 mars 30 22:15:29 helios64 kernel: x11: ffff80000b08d6ad x10: 000000000000000b x9 : 0000000000000001 mars 30 22:15:29 helios64 kernel: x8 : 0000000000000209 x7 : ffff80000e363a70 x6 : 0000000000000001 mars 30 22:15:29 helios64 kernel: x5 : 0000000000000001 x4 : 0000000000000030 x3 : 0000000000000001 mars 30 22:15:29 helios64 kernel: x2 : 0000000000000000 x1 : ffff000004f50e80 x0 : 0000000100000000 mars 30 22:15:29 helios64 kernel: Call trace: mars 30 22:15:29 helios64 kernel: zswap_frontswap_load+0x320/0x330 mars 30 22:15:29 helios64 kernel: __frontswap_load+0x88/0x168 mars 30 22:15:29 helios64 kernel: swap_readpage+0x1a8/0x3c0 mars 30 22:15:29 helios64 kernel: do_swap_page+0x4e0/0x6c8 mars 30 22:15:29 helios64 kernel: __handle_mm_fault+0x5e4/0xdd0 mars 30 22:15:29 helios64 kernel: handle_mm_fault+0xe8/0x278 mars 30 22:15:29 helios64 kernel: do_page_fault+0x1e0/0x448 mars 30 22:15:29 helios64 kernel: do_translation_fault+0x58/0x68 mars 30 22:15:29 helios64 kernel: do_mem_abort+0x40/0xb0 mars 30 22:15:29 helios64 kernel: el0_da+0x24/0x58 mars 30 22:15:29 helios64 kernel: el0t_64_sync_handler+0x68/0xb8 mars 30 22:15:29 helios64 kernel: el0t_64_sync+0x180/0x184 mars 30 22:15:29 helios64 kernel: Code: 12800174 a9446bf9 17ffffc4 d4210000 (d4210000) mars 30 22:15:29 helios64 kernel: ---[ end trace 240751e909ea5fbc ]--- like https://bugzilla.kernel.org/show_bug.cgi?id=192571 . I was able to reproduce the above a few times with: stress -c 1 -m 16 --vm-keep but am unable today. As it seems zswap is useless on zram a swap, maybe it should be turned off either way. I disabled it by adding: extraargs=zswap.enabled=0 to /boot/armbianEnv.txt

I believe it was on your linked build -- I will be reflashing my second unit with the linked build to confirm. The really odd thing is there appears to be a disconnect between load average and CPU usage -- CPU reads pretty low and the unit is overall responsive. If it WAS panfrost, would any clues in ps and/or top indicate it as the cause? I'll let you know what things look like on the latest flash.

Is this on the first armbian build? If so, please try the build i linked above with panfrost disabled. Panfrost is looping at the moment with errors (check dmesg) this could be the cause, or at least probably wont be helping the load average. Ok thank you. i shall have a look into this.

https://mega.nz/file/9sFG2LBT#TsNYnUfNcdPkJgCKFUsYWeKA3R2jJXFVOW-9Vh_H1To This build also has panfrost disabled for time being. It causes issues. This bypasses the login screen/dm, but it shouldn't be a problem for you. This is also a desktop build. Server builds coming shortly!

If you were to clone my fix-bt repo, once I've pushed a little update. And build from that. Build the edge branch. It will all work "out of the box" Give me an hour or so, and I'll update my repos. I'll let you know once I've done it! As far as I was aware, yes panfrost was working. But I'm getting a very "glitchy" dm. And once logged in, and running a dmesg, we're getting an error constantly looping flooding the dmesg... I'll have a look I to the configs etc for the t-720 to see if there's anything I'm missing.

Sometimes we get samples from vendors but more often we buy on our own I am not very deep into stuff but didn't Panfrost for the T-720 work already a year ago? At least on my OPi1+ it was in kind of a working state. Do not have an OPi3 or even LTS version. They all come with H6 SoC. There is if you like to go through Feel free to do so: https://forum.armbian.com/staffapplications/ Check here for supported criteria: https://docs.armbian.com/User-Guide_Board-Support-Rules/

You have an actual lab? Do you buy them in especially? Well as far as I can see, the only issue remaining, I believe, is the panfrost issue. Which I believe you have a fair bit of experience in 😉 haha! May pick your brains at some point if you don't mind? Oh I will be volunteering! That's why I've been trying to keep everything as tidy etc as possible. Is there a formal way to do this? Or do I just stick my hand up here and wait to get picked? I haven't stopped playing over the last few weeks! I've learnt alot! And it's all thanks to this great community!

Good to hear! We got there! Well I guess I'll submit a pull request now then! Then I'll look into the Bluetooth! It crashes everytime you try turn it on. Haven't looked at logs or anything yet though, so haven't got a clue what's going on! And at some point, look into the panfrost issue! DONE! https://github.com/armbian/build/pull/3628

@gounthar - if you are looking for arm laptops for use with linux, then you should also consider arm chromebooks. best supported are the mediatek mt8183 based kukui and the snapdragon 7c based trogdor devices - nearly everything is working for them with mainline with only very few to no patches required and they are available used or new really cheap (by a factor lower than any other arm laptop option). both have 8 cores, 4gb (some 8gb) ram and 64+/-gb fast emmc. performance wise they are above odroid n2 level. if you can get (not easy due to supply issues) or build (there are a few docs with instructions online) a suzyqable you even get features like a serial console on a laptop which you usually never get. the build quality and reliability of such chromebooks is usually way higher as for average sbc's and with mainline on the above mentioned series you get: panfrost gpu support, working suspend/resume and power saving modes, working wifi, bt, sound and for most of them even camera(s). maybe have a look at cadmium: https://github.com/Maccraft123/Cadmium or my linux on arm chromebooks page: https://github.com/hexdump0815/linux-mainline-on-arm-chromebooks to get started. the best supported other arm laptop is the a few years old lenovo c630 (not the chromebook version) and it is still missing some basic functionality here and there (sleep/suspend etc.). another option - the pinebook pro - is in a different performance and quality league (sadly downwards). best wishes - hexdump

Never - h616 have different gpu different cpu regs and different bugs - so no... Errors - [ 121.584328] panfrost 1800000.gpu: js fault, js=0, status=INSTR_INVALID_PC, head=0x715ec00, tail=0x715ec00 [ 121.635491] panfrost 1800000.gpu: js fault, js=0, status=INSTR_INVALID_PC, head=0x715de00, tail=0x715de00 [ 121.637797] panfrost 1800000.gpu: js fault, js=0, status=INSTR_INVALID_PC, head=0x71724c0, tail=0x71724c0 [ 181.666563] panfrost 1800000.gpu: js fault, js=0, status=INSTR_INVALID_PC, head=0x7171280, tail=0x7171280 [ 181.687731] panfrost 1800000.gpu: js fault, js=0, status=INSTR_INVALID_PC, head=0x7173bc0, tail=0x7173bc0 [ 241.728792] panfrost 1800000.gpu: js fault, js=0, status=INSTR_INVALID_PC, head=0x7172900, tail=0x7172900 [ 241.744175] panfrost 1800000.gpu: js fault, js=0, status=INSTR_INVALID_PC, head=0x711f8c0, tail=0x711f8c0 [ 241.750813] panfrost 1800000.gpu: js fault, js=0, status=INSTR_INVALID_PC, head=0x7172f00, tail=0x7172f00

I believe there is a workaround for panfrost. I'll look I to this... is it the constant error your getting? Looping? https://github.com/orangepi-xunlong/u-boot-orangepi/commit/11f8b71080f8311264ec7098f0be7c0b9ea459b7 Not sure if this is the right fix? I'll be tidying my repos up, and pushing all the commits once I've had a few people confirm it boots etc... I'm running a build now with all my patches, and the i2c config. Without panfrost though 😞

Yes please push all needed commits to armbian for lts version: 1. uwe5622 2. r_i2c 3. ac200 audio codec 4. yt8531c 5. sunxi-addr driver 6. dump_reg and sunxi-sysinfo drivers 7. sunxi_get_soc_chipid() and sunxi_get_serial But while testing linux with 5.16 orangepi kernel - xfce and mate desktops crashing related to panfrost driver ((( Maybe lxde better for panfrost..

I tested Armbian_22.02.0-trunk_Nanopct4_bullseye_edge_5.16.8.img, same errors on media kernel for me: http://ix.io/3SjQ [ 656.511836] ------------[ cut here ]------------ [ 656.511851] mmc2: cqhci: spurious TCN for tag 7 [ 656.511959] WARNING: CPU: 0 PID: 6 at drivers/mmc/host/cqhci-core.c:786 cqhci_irq+0x504/0x670 [ 656.511988] Modules linked in: crct10dif_ce snd_soc_spdif_tx gpio_ir_recv rc_core snd_soc_simple_card snd_soc_simple_card_utils panfrost pwm_fan hantro_vpu(C) gpu_sched hci_uart rockchip_vdec(C) rockchip_rga btqca rockchip_iep v4l2_h264 videobuf2_dma_sg videobuf2_vmalloc v4l2_mem2mem videobuf2_dma_contig snd_soc_rockchip_i2s btrtl videobuf2_memops btbcm btsdio btintel videobuf2_v4l2 bluetooth videobuf2_common fusb302 tcpm brcmfmac videodev typec snd_soc_rt5651 ecdh_generic brcmutil ecc cfg80211 rfkill mc zram sunrpc fuse adc_keys [ 656.512272] CPU: 0 PID: 6 Comm: kworker/0:0H Tainted: G C 5.16.8-media #trunk [ 656.512289] Hardware name: FriendlyElec NanoPC-T4 (DT) [ 656.512298] Workqueue: kblockd blk_mq_run_work_fn [ 656.512324] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 656.512340] pc : cqhci_irq+0x504/0x670 [ 656.512353] lr : cqhci_irq+0x504/0x670 [ 656.512365] sp : ffff800008003d90 [ 656.512373] x29: ffff800008003d90 x28: 0000000000004000 x27: ffff800009a91000 [ 656.512399] x26: ffff00000063c580 x25: ffff00000070fa98 x24: ffff800009846fb8 [ 656.512425] x23: ffff80000a14cf00 x22: 0000000000000002 x21: ffff00000063c000 [ 656.512451] x20: ffff00000070fa80 x19: 0000000000000007 x18: 0000000000000020 [ 656.512476] x17: ffff8000edc74000 x16: ffff800008004000 x15: ffffffffffffffff [ 656.512502] x14: 0000000000000000 x13: 0000000000000328 x12: ffff800008003aa0 [ 656.512527] x11: ffff800009f1f458 x10: 00000000ffffe000 x9 : ffff800009f1f458 [ 656.512553] x8 : ffff800009e6f458 x7 : ffff800009f1f458 x6 : 0000000000000000 [ 656.512578] x5 : 0000000000000001 x4 : 0000000000000000 x3 : 0000000000000027 [ 656.512602] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000000685a00 [ 656.512627] Call trace: [ 656.512636] cqhci_irq+0x504/0x670 [ 656.512649] sdhci_arasan_cqhci_irq+0x54/0x84 [ 656.512669] sdhci_irq+0xc4/0xf30 [ 656.512682] __handle_irq_event_percpu+0x60/0x250 [ 656.512704] handle_irq_event+0x64/0x150 [ 656.512722] handle_fasteoi_irq+0xc0/0x1bc [ 656.512738] generic_handle_domain_irq+0x3c/0x60 [ 656.512756] gic_handle_irq+0xd8/0x2c4 [ 656.512776] call_on_irq_stack+0x2c/0x38 [ 656.512793] do_interrupt_handler+0xd4/0xe0 [ 656.512809] el1_interrupt+0x48/0xf0 [ 656.512826] el1h_64_irq_handler+0x18/0x24 [ 656.512842] el1h_64_irq+0x78/0x7c [ 656.512856] preempt_count_sub+0x4c/0xe0 [ 656.512874] sdhci_cqe_enable+0x12c/0x2a0 [ 656.512892] sdhci_arasan_cqe_enable+0xa4/0xf0 [ 656.512911] cqhci_request+0xd4/0x680 [ 656.512923] mmc_cqe_start_req+0xb4/0x1a0 [ 656.512940] mmc_blk_mq_issue_rq+0x4d0/0xa60 [ 656.512954] mmc_mq_queue_rq+0x118/0x2ac [ 656.512968] blk_mq_dispatch_rq_list+0x198/0x824 [ 656.512987] __blk_mq_sched_dispatch_requests+0xb4/0x170 [ 656.513004] blk_mq_sched_dispatch_requests+0x3c/0x80 [ 656.513019] __blk_mq_run_hw_queue+0x54/0x90 [ 656.513035] blk_mq_run_work_fn+0x24/0x30 [ 656.513051] process_one_work+0x1fc/0x4b0 [ 656.513071] worker_thread+0x13c/0x470 [ 656.513088] kthread+0x164/0x180 [ 656.513104] ret_from_fork+0x10/0x20 [ 656.513120] ---[ end trace 7498d4113b84f613 ]---

I first used Kingston endurance SD card with Armbian Buster image. This failed due some incompability with Odroid N2 UHS implementation, but Sandisk extreme SD card worked with same image. After successful boot runned nand-sata-install to ADATA SP 550NS38 SSD connected using VL817 SATA Adaptor (2109:0715). Upgraded the Debian to Bullseye and installed Mesa 21.2.0 packages from experimental repositories, arm64 firefox-esr and armhf Chromium via multiarch to use widevine extracted from ChromeOS images (local err.ee web broadcasts some programs with widevine encryption). This was in the end of august. It mostly worked, but had 3 weird problems that I think to have solved now having some free time. The USB boot hanged up about half of times after kernel detected the SATA drive. Turns out that UAS is culprit, disabling UAS with usb-storage.quirks=2109:0715:u made it now boot every time without problems (modified /boot/boot.ini). About 2-3 minutes after boot the compositor froze (no matter which - tried Xorg compton, wayland Weston and Wayfire (self compiled). Turns out armbian has /etc/udev/rules.d/hdmi.rules which runs /usr/local/bin/hdmi-hotplug. For some reason the hdmi-hotplug script stalls on my Odroid installation and when systemd finally killed it, something went wrong and the compositors froze. Diverting the hdmi.rules fixed it. This was/is weirdest - when TV connected via HDMI was off and turned on, then sometimes the board would shutdown. Found from auth log "auth.log.1:Dec 25 19:04:59 piix systemd-logind[1641]: Power key pressed." Like WTF, i don't have any "power key" and why it gets invoked when TV is turned on. Set the *Key=ignore in /etc/systemd/logind.conf and it seems fine now, no idea what went wrong there. The kernel even don't have CEC enabled (CONFIG_CEC_MESON_AO and CONFIG_CEC_MESON_G12A_AO are not set for some reason in the armbian kernels). A bit later I also saw 5.15.8-meson64 kernel OOPS "Unable to handle kernel execute from non-executable memory" at regmap_update_bits_base+0x74/0x98, meson_clk_cpu_dyndiv_set_rate+0xf4/0x118. As I hadn't seen this before, downgraded to 5.13.12-meson64. I plan to report the OOPS with full kernel dmesg output, when I'll have a bit more time (probably the https://bugzilla.kernel.org/ would be right place?). Currently it seems to work fine, with the 5.13.12-meson64 kernel and mesa/panfrost 21.2.1-2 (from snapshot.debian.org). Weston is used as Wayland compositor. It is important to note that I have 1080p TV, and all video decoding is done on CPU without using the Amlogic VPU acceleration, as the VPU driver is currently both broken in the kernel and unsupported in unpatched userspace. I expected this when choosing the board. Fortunately the 4xA73@2.4GHz is fast enough for decoding most 1080p videos and panfrost is fine for doing the video output after decoding. AFAIK playing 4K videos is currently not possible on Odroid N2 with mainline kernel and the vendors proprietary VPU decoder isn't supported by any software in open source distributions like Debian. Interesting is that Firefox seems to handle the video decoding pathway better for Youtube in this configuration, while Chromium occasionally stutters on some Youtube videos, these seem to be fine with Firefox. Luckily this seems to not affect the site where I needed widevine (that works only with Chromium in practice). In september widevine upgraded to version needing patched libc. I got patched armhf libc6 package from apt.xbian.org repository. The ALSA configuration is weird, amixer scontrols | wc gives 50 controls, and if misconfigured, then the thing doesn't give any audio output. I found the following script from somewhere that "fixes" it into working state: amixer sset 'FRDDR_A SINK 1 SEL' 'OUT 1' amixer sset 'FRDDR_A SRC 1 EN' 'on' amixer sset 'TDMOUT_B SRC SEL' 'IN 0' amixer sset 'TOHDMITX I2S SRC' 'I2S B' amixer sset 'TOHDMITX' 'on' amixer sset 'FRDDR_B SINK 1 SEL' 'OUT 2' amixer sset 'FRDDR_B SRC 1 EN' 'on' amixer sset 'TDMOUT_C SRC SEL' 'IN 1' amixer sset 'TOACODEC SRC' 'I2S C' amixer sset 'TOACODEC OUT EN' 'on' amixer sset 'TOACODEC Lane Select' '0' amixer sset 'ACODEC' '255' amixer sset 'FRDDR_C SINK 1 SEL' 'OUT 3' amixer sset 'FRDDR_C SRC 1 EN' 'on' amixer sset 'SPDIFOUT SRC SEL' 'IN 2' After that ALSA pcm "hw:0,1" output works. I configured dmixed and removed pulseaudio, as it seemed to complicate things with no benefit when mpc and browser run as different users. Armbian is great (couldn't have the board working so well without armbian) and merry holidays for you Hoping this helps others having Odroid N2(+) board.

I came across these recently and found several interesting things within, so thought I would share them. I debated posting this in Development, but wanted anyone to be able to see and reply to the thread. Anyway some parts I felt were important enough that I actually took down some notes and quotations, which I will include. Open drivers for Arm GPUs This looks like it was presentation LVC21-318 at Linaro Connect '21 on 2021-03-25. Video is available at above page, and also on ThemTube here. I found this a fascinating presentation. Alyssa contrasts the (proprietary) 'before times' with current situation which is apparently quite different. In fact, I was quite surprised to learn that: She then goes on to give 3 case studies, one of which was VideoCore, where I was more than a little surprised to learn that Broadcom at some point actually hired someone to work on their F/LOSS driver. Now this was only after that guy was well into his own (night and weekend) reverse engineering effort, followed by a lot of public pressure, but still. End result apparently is that this driver is now shipping in production RPi 4. Next case study was about Freedreno. I will quote my favorite part from here: Of course being firmly in the camp with the 'looney Free Software types' myself, this comment warmed my heart quite a bit. Finally she gives the Panfrost case study, where she points out that things are apparently moving away from the 'reverse-engineering underdog' model, and: And so reverse engineering is apparently no longer needed. Apparently this is the driver that ships in PineBook Pro for example. Of course I must admit to being more than a little bit (pleasantly!) surprised at all of this. And also starting to soften my stance towards Broadcom (just a little though, lol). If you are the least bit interested in any of this, I can highly recommend watching the full presentation. It's only 19 minutes long, anyway, but I personally was riveted the entire time. The Open Graphics Stack I think this presentation was given at Embedded Linux Conference '21 on 2021-09-29. So, about 6 months after the above. But honestly I came across it on ThemTube here. In the beginning, she makes a good point about the tension between embedded devices with perhaps 20 year life cycles, and devices with proprietary drivers which may be EoL in 5 years, and how this tension can be alleviated by using F/LOSS drivers. But what got my attention the most was: She then goes on about details of particular platforms (including x86, ARM, etc.) and then finally: Which is a quite bold (and again, pleasantly surprising) statement IMO, but then again I do consider her an authority on the subject. After that she goes into quite some detail about the nuts and bolts of all the various parts of the stack, which you may or may not be interested in watching as much.

Hi Balbes, Regarding this and the contact with radxa that you mentioned, I am directly in contact with radxa's dev team and allnet Spain (the official distributor of radxa in the world). What they told me is that their main effort now is put into Manjaro's distribution (https://manjaro.org/downloads/arm/rock-pi-4b/arm8-rockpi4b-xfce/) I have also reviewed the work of Akash Gajjar with kernel 5.10 and rock pi 4 and I am trying to get in contact with Alyssa Rosenzweig, that is the responsible of some great patches for using rk33xx with panfrost and trying to intagrate VPU use with mesa. I will let you know my progresses about all these things with rock pi 4, but to sum up I can see some lights at the end of the tunnel. Thanks!

I don't have the RockPi4 anymore. I do have the NanoPi M4 and I run 5.14.11 on it without any problems. This only comes with GPU drivers, and not VPU drivers. Indeed for VPU you need to use Buster 4.4 with the media framework. That also has some GPU acceleration, but not panfrost. I've used it for a very long time. But with the old Media script on Armbian Bionic 4.4 I only watch 1080p video files and youtube at 1080p. And this works well enough now on mainline. Only thing mainline can't do is 4K video. The M4 used to be my main desktop. For that I would still use 4.4. Now it's my 2nd desktop. My first desktop does 4K, so no need for it anymore on my RK3399. No idea about wayland. I always stayed with xfce4/x11 for desktop.

Hi Nico! This is a great video! Congratulations! We are working on a distribution based on Armbian for education, based also in rock pi 4, but we are facing several issues related to video. As you know, If we want good video and audio reproduction based on GPU, our best chance would be kernel 4.4, but that way we would loose GPU accelerated 3D. If we want to use panfrost, we should use mainline kernel... My question is: Is there any possibility of using an stable version of wayland for this purposes? If not, which could be the best choice for us to have an stable desktop, with chromium and all other stuff? Would it be possible in the near future to have GPU accelerated videos throuth v4l2 decent drivers? Sorry for the long question, but we don't really know pretty well which path to follow. Thanks so much!

I have some issues with the ethernet adapter on my Rock Pi 4B+ (v1.72) Connections seem to drop, sometimes Ping loses a packet. APT-GET UPDATE doesn't work.. Waiting For headers / Speed to low and constantly dropping -> Timeout On Wi-Fi everything seems to work, but for stability I'd ofcourse like the ethernet to work... IPERF3 Tests run successfull. (Server on LAN) PING drops 1 packet in the sequence then seems to run fine for a while (LAN) DMESG (Maybe this gives more information?): [ 7.997847] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0 [ 7.997855] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400 [ 7.997860] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 [ 7.997864] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1 [ 7.999104] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9 [ 8.000699] usbcore: registered new interface driver brcmfmac [ 8.009791] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43456-sdio.radxa,rockpi4b.txt failed with error -2 [ 8.012675] [drm] Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on minor 1 [ 8.013029] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned. [ 8.020903] hantro-vpu ff650000.video-codec: Adding to iommu group 0 [ 8.021991] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video2 [ 8.022409] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video3 [ 8.076933] Bluetooth: Core ver 2.22 [ 8.077056] NET: Registered protocol family 31 [ 8.077062] Bluetooth: HCI device and connection manager initialized [ 8.077082] Bluetooth: HCI socket layer initialized [ 8.077092] Bluetooth: L2CAP socket layer initialized [ 8.077117] Bluetooth: SCO socket layer initialized [ 8.133709] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9 [ 8.134711] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 8.136106] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/9 wl0: Feb 11 2020 11:54:51 version 7.45.96.61 (be7af2d@shgit) (r745790) FWID 01-a41d86bd es7.c5.n4.a3 [ 8.410774] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=POLL) [ 8.410823] cma: cma_alloc: alloc failed, req-size: 2 pages, ret: -12 [ 8.411449] cma: cma_alloc: alloc failed, req-size: 2 pages, ret: -12 [ 8.413101] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found [ 8.413118] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW [ 8.413677] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode [ 9.446580] random: crng init done [ 9.446588] random: 7 urandom warning(s) missed due to ratelimiting [ 12.519689] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx I'm not sure where to look next, maybe someone can help?

Good day. Yesterday I downloaded the latest Armbian version for the ASUS Tinker Board S and flashed the built-in eMMC (with Etcher Balena). The software works fine, but - the SD card is not mounted as mass storage, the file manager THUNAR does not recognize it. also lsusb does not recognize it. - a plugged USB- flash-stick is not mounted by the file manager THUNAR, although lsusb lists it. Ist das Problem behebbar? Is the problem fixable? The USB stick of a wireless mouse is recognized and also connects to the conputermouse. Regards Karl Translated with www.DeepL.com/Translator (free version) Armbianmonitor output: 1226 gesamt belegt frei gemeinsam Zwischen verfügbar 1227 Speicher: 2,0Gi 276Mi 1,1Gi 97Mi 606Mi 1,5Gi 1228 Auslager: 1,0Gi 0B 1,0Gi 1229 1230 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT 1231 /dev/zram1 zstd 50M 2,8M 520K 908K 4 /var/log 1232 /dev/zram0 lzo-rle 1000,3M 4K 74B 4K 4 [SWAP] 1233 1234 13:51:35 up 18 min, 1 user, load average: 0,62, 0,37, 0,29 1235 1236 [ 5.836490] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 1237 [ 5.836509] cfg80211: failed to load regulatory.db 1238 [ 5.842078] Freeing unused kernel memory: 1024K 1239 [ 5.871346] Run /init as init process 1240 [ 5.871358] with arguments: 1241 [ 5.871368] /init 1242 [ 5.871377] earlyprintk 1243 [ 5.871385] with environment: 1244 [ 5.871394] HOME=/ 1245 [ 5.871403] TERM=linux 1246 [ 5.871412] ubootpart=7350c3ca-01 1247 [ 5.871420] cgroup_enable=memory 1248 [ 5.871429] cgroup_memory=1 1249 [ 6.124194] scsi 0:0:0:0: Direct-Access Generic Flash Disk 8.01 PQ: 0 ANSI: 6 1250 [ 6.127101] sd 0:0:0:0: [sda] 491520000 512-byte logical blocks: (252 GB/234 GiB) 1251 [ 6.127958] sd 0:0:0:0: [sda] Write Protect is off 1252 [ 6.127981] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 1253 [ 6.128587] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA 1254 [ 6.169993] random: crng init done 1255 [ 6.170080] sda: sda1 sda2 1256 [ 6.175237] sd 0:0:0:0: [sda] Attached SCSI removable disk 1257 [ 6.956487] usbcore: registered new interface driver uas 1258 [ 7.164412] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/button@0[0]' - status (0) 1259 [ 7.164465] gpio gpiochip0: Persistence not supported for GPIO 5 1260 [ 7.165033] input: gpio-keys as /devices/platform/gpio-keys/input/input7 1261 [ 7.981260] EXT4-fs (mmcblk2p1): mounted filesystem with writeback data mode. Opts: (null) 1262 [ 8.409839] systemd[1]: System time before build time, advancing clock. 1263 [ 8.443885] systemd[1]: systemd 245.4-4ubuntu3.13 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) 1264 [ 8.445583] systemd[1]: Detected architecture arm. 1265 [ 8.480536] systemd[1]: Set hostname to <tinkerboard>. 1266 [ 8.666691] dw-apb-uart ff690000.serial: forbid DMA for kernel console 1267 [ 9.715414] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. 1268 [ 9.715451] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) 1269 [ 9.721565] systemd[1]: Created slice system-modprobe.slice. 1270 [ 9.725076] systemd[1]: Created slice system-serial-getty.slice. 1271 [ 9.728081] systemd[1]: Created slice User and Session Slice. 1272 [ 9.729318] systemd[1]: Started Forward Password Requests to Wall Directory Watch. 1273 [ 9.731787] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. 1274 [ 9.733115] systemd[1]: Reached target Remote File Systems. 1275 [ 9.733753] systemd[1]: Reached target Slices. 1276 [ 9.734424] systemd[1]: Reached target Swap. 1277 [ 9.735110] systemd[1]: Reached target System Time Set. 1278 [ 9.736730] systemd[1]: Listening on Syslog Socket. 1279 [ 9.738186] systemd[1]: Listening on fsck to fsckd communication Socket. 1280 [ 9.739374] systemd[1]: Listening on initctl Compatibility Named Pipe. 1281 [ 9.741582] systemd[1]: Listening on Journal Audit Socket. 1282 [ 9.743259] systemd[1]: Listening on Journal Socket (/dev/log). 1283 [ 9.744957] systemd[1]: Listening on Journal Socket. 1284 [ 9.746626] systemd[1]: Listening on udev Control Socket. 1285 [ 9.747928] systemd[1]: Listening on udev Kernel Socket. 1286 [ 9.749366] systemd[1]: Condition check resulted in Huge Pages File System being skipped. 1287 [ 9.758327] systemd[1]: Mounting POSIX Message Queue File System... 1288 [ 9.769921] systemd[1]: Mounting Kernel Debug File System... 1289 [ 9.781716] systemd[1]: Mounting Kernel Trace File System... 1290 [ 9.795811] systemd[1]: Starting Restore / save the current clock... 1291 [ 9.807968] systemd[1]: Starting Set the console keyboard layout... 1292 [ 9.820310] systemd[1]: Starting Create list of static device nodes for the current kernel... 1293 [ 9.822001] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped. 1294 [ 9.835298] systemd[1]: Started Nameserver information manager. 1295 [ 9.837328] systemd[1]: Reached target Network (Pre). 1296 [ 9.841783] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. 1297 [ 9.842383] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. 1298 [ 9.859128] systemd[1]: Starting Load Kernel Modules... 1299 [ 9.872246] systemd[1]: Starting Remount Root and Kernel File Systems... 1300 [ 9.885510] systemd[1]: Starting udev Coldplug all Devices... 1301 [ 9.906572] systemd[1]: Mounted POSIX Message Queue File System. 1302 [ 9.909428] systemd[1]: Mounted Kernel Debug File System. 1303 [ 9.911813] systemd[1]: Mounted Kernel Trace File System. 1304 [ 9.920286] systemd[1]: Finished Restore / save the current clock. 1305 [ 9.930200] systemd[1]: Finished Create list of static device nodes for the current kernel. 1306 [ 9.954244] systemd[1]: Finished Load Kernel Modules. 1307 [ 9.957574] systemd[1]: Condition check resulted in FUSE Control File System being skipped. 1308 [ 9.968358] systemd[1]: Mounting Kernel Configuration File System... 1309 [ 9.979690] systemd[1]: Starting Apply Kernel Variables... 1310 [ 9.990953] EXT4-fs (mmcblk2p1): re-mounted. Opts: commit=600,errors=remount-ro 1311 [ 10.011899] systemd[1]: Finished Remount Root and Kernel File Systems. 1312 [ 10.014404] systemd[1]: Mounted Kernel Configuration File System. 1313 [ 10.017775] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. 1314 [ 10.018172] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. 1315 [ 10.027339] systemd[1]: Starting Load/Save Random Seed... 1316 [ 10.039418] systemd[1]: Starting Create System Users... 1317 [ 10.118470] systemd[1]: Finished Load/Save Random Seed. 1318 [ 10.126721] systemd[1]: Finished Apply Kernel Variables. 1319 [ 10.135596] systemd[1]: Finished Create System Users. 1320 [ 10.147391] systemd[1]: Starting Create Static Device Nodes in /dev... 1321 [ 10.239090] systemd[1]: Finished Create Static Device Nodes in /dev. 1322 [ 10.249411] systemd[1]: Starting udev Kernel Device Manager... 1323 [ 10.371518] systemd[1]: Finished Set the console keyboard layout. 1324 [ 10.373555] systemd[1]: Reached target Local File Systems (Pre). 1325 [ 10.383463] systemd[1]: Mounting /tmp... 1326 [ 10.407098] systemd[1]: Mounted /tmp. 1327 [ 10.416444] systemd[1]: Reached target Local File Systems. 1328 [ 10.425540] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. 1329 [ 10.434297] systemd[1]: Starting Armbian ZRAM config... 1330 [ 10.452393] systemd[1]: Starting Set console font and keymap... 1331 [ 10.472492] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... 1332 [ 10.486312] systemd[1]: Condition check resulted in Load AppArmor profiles managed internally by snapd being skipped. 1333 [ 10.486846] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. 1334 [ 10.487457] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. 1335 [ 10.519036] systemd[1]: plymouth-read-write.service: Succeeded. 1336 [ 10.524489] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data. 1337 [ 10.535293] systemd[1]: Started udev Kernel Device Manager. 1338 [ 10.571196] systemd[1]: Finished Set console font and keymap. 1339 [ 11.208985] core: _opp_supported_by_regulators: OPP minuV: 1475000 maxuV: 1475000, not supported by regulator 1340 [ 11.209010] cpu cpu0: _opp_add: OPP not supported by regulators (2016000000) 1341 [ 11.209332] core: _opp_supported_by_regulators: OPP minuV: 1475000 maxuV: 1475000, not supported by regulator 1342 [ 11.209351] cpu cpu0: _opp_add: OPP not supported by regulators (2040000000) 1343 [ 11.209686] core: _opp_supported_by_regulators: OPP minuV: 1475000 maxuV: 1475000, not supported by regulator 1344 [ 11.209704] cpu cpu0: _opp_add: OPP not supported by regulators (2064000000) 1345 [ 11.210065] core: _opp_supported_by_regulators: OPP minuV: 1500000 maxuV: 1500000, not supported by regulator 1346 [ 11.210084] cpu cpu0: _opp_add: OPP not supported by regulators (2088000000) 1347 [ 11.210418] core: _opp_supported_by_regulators: OPP minuV: 1500000 maxuV: 1500000, not supported by regulator 1348 [ 11.210437] cpu cpu0: _opp_add: OPP not supported by regulators (2112000000) 1349 [ 11.210742] core: _opp_supported_by_regulators: OPP minuV: 1500000 maxuV: 1500000, not supported by regulator 1350 [ 11.210760] cpu cpu0: _opp_add: OPP not supported by regulators (2136000000) 1351 [ 11.211353] core: _opp_supported_by_regulators: OPP minuV: 1500000 maxuV: 1500000, not supported by regulator 1352 [ 11.211373] cpu cpu0: _opp_add: OPP not supported by regulators (2160000000) 1353 [ 11.211717] core: _opp_supported_by_regulators: OPP minuV: 1500000 maxuV: 1500000, not supported by regulator 1354 [ 11.211735] cpu cpu0: _opp_add: OPP not supported by regulators (2184000000) 1355 [ 11.212061] core: _opp_supported_by_regulators: OPP minuV: 1500000 maxuV: 1500000, not supported by regulator 1356 [ 11.212078] cpu cpu0: _opp_add: OPP not supported by regulators (2208000000) 1357 [ 11.212121] cpu cpu0: _opp_is_duplicate: duplicate OPPs detected. Existing: freq: 1704000000, volt: 1350000, enabled: 1. New: freq: 1704000000, volt: 1350000, enabled: 1 1358 [ 11.212159] cpu cpu0: _opp_is_duplicate: duplicate OPPs detected. Existing: freq: 1800000000, volt: 1400000, enabled: 1. New: freq: 1800000000, volt: 1400000, enabled: 1 1359 [ 11.215194] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 500000 KHz, changing to: 600000 KHz 1360 [ 11.239635] zram: Added device: zram0 1361 [ 11.239934] zram: Added device: zram1 1362 [ 11.240214] zram: Added device: zram2 1363 [ 11.311929] systemd[1]: Finished udev Coldplug all Devices. 1364 [ 11.315977] r8723bs: module is from the staging directory, the quality is unknown, you have been warned. 1365 [ 11.319914] RTL8723BS: module init start 1366 [ 11.319919] RTL8723BS: rtl8723bs vXXX.XXX.5.5_12290.20140916_BTCOEX20140507-4E40 1367 [ 11.319921] RTL8723BS: rtl8723bs BT-Coex version = BTCOEX20140507-4E40 1368 [ 11.322681] pnetdev = 34189b2b 1369 [ 11.336851] systemd[1]: Starting Helper to synchronize boot up for ifupdown... 1370 [ 11.347660] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. 1371 [ 11.357353] systemd[1]: Started Dispatch Password Requests to Console Directory Watch when bootsplash is active. 1372 [ 11.365431] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. 1373 [ 11.368998] systemd[1]: Reached target Local Encrypted Volumes. 1374 [ 11.389651] systemd[1]: Finished Helper to synchronize boot up for ifupdown. 1375 [ 11.427064] RTL8723BS: rtw_ndev_init(wlan0) 1376 [ 11.427784] RTL8723BS: module init ret =0 1377 [ 11.428562] systemd[1]: Starting Raise network interfaces... 1378 [ 11.452077] zram0: detected capacity change from 0 to 1048838144 1379 [ 11.555169] Adding 1024252k swap on /dev/zram0. Priority:5 extents:1 across:1024252k SSFS 1380 [ 11.608683] systemd[1]: Found device /dev/ttyS2. 1381 [ 11.623988] gpiomem-rk3288 ff750000.rk3288-gpiomem: Initialised: Registers at 0xff750000 1382 [ 11.666742] dw_wdt ff800000.watchdog: No valid TOPs array specified 1383 [ 11.721229] rockchip-rga ff920000.rga: HW Version: 0x00.00 1384 [ 11.721619] rockchip-rga ff920000.rga: Registered rockchip-rga as /dev/video0 1385 [ 11.806547] panfrost ffa30000.gpu: clock rate = 400000000 1386 [ 11.807364] panfrost ffa30000.gpu: [drm:panfrost_devfreq_init [panfrost]] Failed to register cooling device 1387 [ 11.807408] panfrost ffa30000.gpu: mali-t760 id 0x750 major 0x0 minor 0x0 status 0x1 1388 [ 11.807415] panfrost ffa30000.gpu: features: 00000000,100277bf, issues: 00000000,24040400 1389 [ 11.807420] panfrost ffa30000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 1390 [ 11.807424] panfrost ffa30000.gpu: shader_present=0xf l2_present=0x1 1391 [ 11.831557] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned. 1392 [ 11.832586] hantro-vpu ff9a0000.video-codec: Adding to iommu group 2 1393 [ 11.833071] hantro-vpu ff9a0000.video-codec: registered rockchip,rk3288-vpu-enc as /dev/video1 1394 [ 11.833199] hantro-vpu ff9a0000.video-codec: registered rockchip,rk3288-vpu-dec as /dev/video2 1395 [ 11.845144] zram1: detected capacity change from 0 to 52428800 1396 [ 11.865151] rk3288-crypto ff8a0000.cypto-controller: Crypto Accelerator successfully registered 1397 [ 11.868845] [drm] Initialized panfrost 1.1.0 20180908 for ffa30000.gpu on minor 1 1398 [ 11.919210] systemd[1]: Finished Armbian ZRAM config. 1399 [ 11.994922] systemd[1]: Starting Armbian memory supported logging... 1400 [ 12.194085] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard 1401 [ 12.194124] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff) 1402 [ 12.305440] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. 1403 [ 12.311531] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/sound[0]' 1404 [ 12.311552] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/sound[0]' 1405 [ 12.439220] systemd[1]: Condition check resulted in Huge Pages File System being skipped. 1406 [ 12.439571] systemd[1]: Condition check resulted in FUSE Control File System being skipped. 1407 [ 12.440437] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. 1408 [ 12.444147] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... 1409 [ 12.448720] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. 1410 [ 12.449082] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. 1411 [ 12.453320] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. 1412 [ 12.453676] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. 1413 [ 12.453810] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. 1414 [ 12.453945] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. 1415 [ 12.454097] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. 1416 [ 12.454199] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. 1417 [ 12.456432] systemd[1]: Finished Raise network interfaces. 1418 [ 12.669295] systemd[1]: plymouth-read-write.service: Succeeded. 1419 [ 12.671001] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data. 1420 [ 12.701324] systemd[1]: Condition check resulted in Huge Pages File System being skipped. 1421 [ 12.701629] systemd[1]: Condition check resulted in FUSE Control File System being skipped. 1422 [ 12.701744] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. 1423 [ 12.705418] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... 1424 [ 12.708870] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. 1425 [ 12.708963] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. 1426 [ 12.709178] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. 1427 [ 12.709284] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. 1428 [ 12.709420] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. 1429 [ 12.709545] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. 1430 [ 12.709637] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. 1431 [ 12.712729] systemd[1]: Starting Load/Save RF Kill Switch Status... 1432 [ 12.721790] systemd[1]: plymouth-read-write.service: Succeeded. 1433 [ 12.723366] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data. 1434 [ 12.728510] systemd[1]: Started Load/Save RF Kill Switch Status. 1435 [ 13.469980] usbcore: registered new interface driver snd-usb-audio 1436 [ 13.487930] systemd[1]: Condition check resulted in Huge Pages File System being skipped. 1437 [ 13.488232] systemd[1]: Condition check resulted in FUSE Control File System being skipped. 1438 [ 13.488338] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped. 1439 [ 13.491508] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... 1440 [ 13.495122] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. 1441 [ 13.495224] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. 1442 [ 13.495441] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. 1443 [ 13.495539] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. 1444 [ 13.495634] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. 1445 [ 13.495732] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. 1446 [ 13.495802] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. 1447 [ 13.508215] systemd[1]: plymouth-read-write.service: Succeeded. 1448 [ 13.509567] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data. 1449 [ 14.567383] systemd[1]: Finished Armbian memory supported logging. 1450 [ 14.575523] systemd[1]: Starting Journal Service... 1451 [ 14.780092] systemd[1]: Started Journal Service. 1452 [ 14.799946] systemd-journald[831]: Received client request to flush runtime journal. 1453 [ 15.629678] gpio gpiochip4: Persistence not supported for GPIO 26 1454 [ 15.629952] gpio gpiochip4: Persistence not supported for GPIO 29 1455 [ 15.630133] gpio gpiochip4: Persistence not supported for GPIO 31 1456 [ 15.917832] squashfs: version 4.0 (2009/01/31) Phillip Lougher 1457 [ 16.053464] Initializing XFRM netlink socket 1458 [ 16.130712] PPP generic driver version 2.4.2 1459 [ 16.132180] NET: Registered protocol family 24 1460 [ 16.176891] l2tp_core: L2TP core driver, V2.0 1461 [ 16.180357] l2tp_netlink: L2TP netlink interface 1462 [ 16.196362] l2tp_ppp: PPPoL2TP kernel driver, V2.0 1463 [ 16.415893] rk_gmac-dwmac ff290000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet] (irq=POLL) 1464 [ 16.427034] rk_gmac-dwmac ff290000.ethernet eth0: No Safety Features support found 1465 [ 16.427048] rk_gmac-dwmac ff290000.ethernet eth0: PTP not supported by HW 1466 [ 16.427429] rk_gmac-dwmac ff290000.ethernet eth0: configuring for phy/rgmii link mode 1467 [ 16.502370] rtl8723bs: acquire FW from file:rtlwifi/rtl8723bs_nic.bin 1468 [ 17.669868] dw-apb-uart ff180000.serial: failed to request DMA 1469 [ 19.730305] RTL8723BS: rtw_set_802_11_connect(wlan0) fw_state = 0x00000008 1470 [ 20.028161] RTL8723BS: start auth 1471 [ 20.031027] RTL8723BS: auth success, start assoc 1472 [ 20.034375] RTL8723BS: rtw_cfg80211_indicate_connect(wlan0) BSS not found !! 1473 [ 20.034394] RTL8723BS: assoc success 1474 [ 20.336646] RTL8723BS: send eapol packet 1475 [ 20.343267] RTL8723BS: send eapol packet 1476 [ 20.343455] RTL8723BS: set pairwise key camid:4, addr:a0:e4:cb:09:93:be, kid:0, type:AES 1477 [ 20.343741] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready 1478 [ 20.345030] RTL8723BS: set group key camid:5, addr:a0:e4:cb:09:93:be, kid:2, type:AES 1479 [ 37.857975] vcc_sd: supplied by vcc_io 1480 [ 37.858109] vcc_sd: disabling 1481 [ 525.279968] mmc0: card 0001 removed 1482 [ 525.339848] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) 1483 [ 525.392304] mmc_host mmc0: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0) 1484 [ 525.449061] mmc_host mmc0: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0) 1485 [ 525.512587] mmc_host mmc0: Bus speed (slot 0) = 187500Hz (slot req 100000Hz, actual 93750HZ div = 1) 1486 1487 1488 1489 ### interrupts: 1490 CPU0 CPU1 CPU2 CPU3 1491 25: 34978 29949 45201 75003 GIC-0 29 Level arch_timer 1492 26: 0 0 0 0 GIC-0 30 Level arch_timer 1493 29: 0 0 0 0 GIC-0 104 Level rk_timer 1494 30: 0 0 0 0 GIC-0 183 Level arm-pmu 1495 31: 0 0 0 0 GIC-0 184 Level arm-pmu 1496 32: 0 0 0 0 GIC-0 185 Level arm-pmu 1497 33: 0 0 0 0 GIC-0 186 Level arm-pmu 1498 34: 0 0 0 0 GIC-0 34 Level ff250000.dma-controller 1499 35: 0 0 0 0 GIC-0 35 Level ff250000.dma-controller 1500 36: 405 0 0 0 GIC-0 32 Level ffb20000.dma-controller 1501 37: 0 0 0 0 GIC-0 33 Level ffb20000.dma-controller 1502 38: 47881 0 0 0 GIC-0 64 Level dw-mci 1503 39: 167803 0 0 0 GIC-0 65 Level dw-mci 1504 40: 72820 0 0 0 GIC-0 67 Level dw-mci 1505 41: 3 0 0 0 GIC-0 68 Level ff100000.saradc 1506 42: 105 0 0 0 GIC-0 97 Level ff170000.i2c 1507 43: 23 0 0 0 GIC-0 87 Level ttyS0 1508 45: 3 0 0 0 GIC-0 89 Level ttyS2 1509 48: 0 0 0 0 GIC-0 69 Level rockchip_thermal 1510 49: 0 0 0 0 GIC-0 59 Level eth0 1511 50: 0 0 0 0 GIC-0 60 Level eth0 1512 51: 299 0 10768 0 GIC-0 56 Level ehci_hcd:usb3 1513 52: 89010 8645477 0 0 GIC-0 57 Level ff540000.usb, dwc2_hsotg:usb1 1514 53: 0 0 0 0 GIC-0 55 Level ff580000.usb, ff580000.usb, dwc2_hsotg:usb2 1515 54: 1200 0 0 0 GIC-0 92 Level ff650000.i2c 1516 55: 0 0 0 0 GIC-0 93 Level ff660000.i2c 1517 56: 0 0 0 0 GIC-0 111 Edge ff800000.watchdog 1518 58: 0 0 0 0 GIC-0 80 Level rk-crypto 1519 59: 0 0 0 0 GIC-0 50 Level ff920000.rga 1520 60: 18854 0 0 0 GIC-0 47 Level ff930300.iommu, ff930000.vop 1521 61: 0 0 0 0 GIC-0 48 Level ff940300.iommu, ff940000.vop 1522 62: 1 0 0 0 GIC-0 135 Level ff980000.hdmi, dw-hdmi-cec 1523 63: 0 0 0 0 GIC-0 41 Level ff9a0000.video-codec 1524 64: 0 0 0 0 GIC-0 42 Level ff9a0000.video-codec 1525 65: 0 0 0 0 GIC-0 43 Level ff9a0800.iommu 1526 66: 27858 0 0 0 GIC-0 38 Level panfrost-job 1527 67: 0 0 0 0 GIC-0 39 Level panfrost-mmu 1528 68: 2 0 0 2593 GIC-0 40 Level panfrost-gpu 1529 78: 0 0 0 0 rockchip_gpio_irq 4 Level rk808 1530 84: 0 0 0 0 rk808 5 Edge RTC alarm 1531 88: 0 0 0 0 rockchip_gpio_irq 5 Edge GPIO Key Power 1532 IPI0: 0 0 0 0 CPU wakeup interrupts 1533 IPI1: 0 0 0 0 Timer broadcast interrupts 1534 IPI2: 881 856 915 726 Rescheduling interrupts 1535 IPI3: 52982 36714 83184 83220 Function call interrupts 1536 IPI4: 0 0 0 0 CPU stop interrupts 1537 IPI5: 2729 250 271 925 IRQ work interrupts 1538 IPI6: 0 0 0 0 completion interrupts 1539 Err: 0 Please upload the whole output above to an online pasteboard service and provide the URL in the forum where you have been asked for this. schong@tinkerboard:~$ +

EDIT: After a few days the focal xfce gave me the blank display bug as well I have tried now extensively tested two other DE's: gnome and Cinnamon. Gnome: found that the bug is totally not existant on Gnome (3.36), have run it for a week or so without any burp. Only ting I dislike is that is a bit heavy feeling, not a ssmooth running as XFCE or Cinnamon Cinnamon: the bug does happen here sometimes, BUT it only takes a 1-2 second until it shows the screen again WITH the chosen resolution. Can live with that as it's a smooth experience and has lot of handy features. Budgie: I haven't tested it because it is not as feature rich as other DE's in my opinion BTW hirsute works fine, it's really the Panfrost driver that causes the issue and the DE that copes with it smartly or not BTW2 i recommend using the oibaf/graphics-drivers ppa for the newest drivers, they do have less bugginess BTW3 In case your system does bug to a lower resolution everytime if have found you can try setting the default resolution by setting it in /etc/X11/xorg.conf by copying a mode from cvt: cvt 1920 1080 60 # specify your width height of resolution and refresh rate (60Hz = usually ok) then copy the output, and paste it into the second last line in the following text blob inside a text editor, then copy all this into the bottom of /etc/X11/xorg.conf (open it in a text editor f.e. sudo gedit /etc/X11/xorg.conf ) Section "Monitor" Identifier "dummy_monitor" HorizSync 28.0-80.0 VertRefresh 48.0-75.0 Modeline XXX # replace this line here with cvt output EndSection