mindee

FriendlyElec will release a new ROM, it can use dual/single MIPI camera, or USB UVC camera on Ubuntu Desktop, about 1-2 weeek.

FriendlyElec will release a new ROM, it can use dual/single MIPI camera, or USB UVC camera on Ubuntu Desktop, about 1-2 weeek.

Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
 
 

Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
 
 

Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
 
 

Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
 
 

Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
 
 

Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
 
 

Not the final version.

 
Update(8/24/2018): It's time to deal with NEO4, this picture is not the final version. NEO4 will have PCIe x2 and eMMC connector too, and a MIPI-CSI. But the dual-layer USB connector  will share USB 3.0 & USB 2.0, Type-C take another USB 3.0.

Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
 
 

Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
 
 

I think the manufacturing cost is not so high, I am not sure for that now. The NEO4 use a differencet PCIe connector, it’s not a easy thing to fit both with one HAT, considering the signal quality.

Just a little bit list, more detail would be done on wiki soon.
1. NEO4 board size is 45 x 56mm, but M4 is 85 x 56mm
2. NEO4 has 1GB DDR3 RAM with single chanel, But M4 has two version 2GB DDR3 RAM/4G LPDDR3 RAM with Dual Chanel.
3. NEO4  will use AP6212 wireless module with single antenna , but M4 use AP6356S dual-band module, and use 2x2 MIMO and 2 real antennas. 
4. NEO4 has one MIPI-CSI, M4 has two MIPI-CSI
5. NEO4 has USB3.0  x1 & USB 2.0  x1, but M4 has USB 3.0 x4 behind a VL817 internal hub.
6. NEO4 use 1.27mm pitch SMD connector for GPIO-40 pinout,  M4 is same with RPi3 40pin GPIO.
 
Both have:
1. PCIe x2 pin-out
2. eMMC module connector
3. GigE port.
4. TypeC is for power supply and OTG.
5. HDMI-A & MicroSD slot.
6. Big CNC heat sink, with two side 1/4 screw hole

Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
 
 

Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
 
 

Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
 
 

Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
 
 

Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
 
 

Just a little bit list, more detail would be done on wiki soon.
1. NEO4 board size is 45 x 56mm, but M4 is 85 x 56mm
2. NEO4 has 1GB DDR3 RAM with single chanel, But M4 has two version 2GB DDR3 RAM/4G LPDDR3 RAM with Dual Chanel.
3. NEO4  will use AP6212 wireless module with single antenna , but M4 use AP6356S dual-band module, and use 2x2 MIMO and 2 real antennas. 
4. NEO4 has one MIPI-CSI, M4 has two MIPI-CSI
5. NEO4 has USB3.0  x1 & USB 2.0  x1, but M4 has USB 3.0 x4 behind a VL817 internal hub.
6. NEO4 use 1.27mm pitch SMD connector for GPIO-40 pinout,  M4 is same with RPi3 40pin GPIO.
 
Both have:
1. PCIe x2 pin-out
2. eMMC module connector
3. GigE port.
4. TypeC is for power supply and OTG.
5. HDMI-A & MicroSD slot.
6. Big CNC heat sink, with two side 1/4 screw hole

Just a little bit list, more detail would be done on wiki soon.
1. NEO4 board size is 45 x 56mm, but M4 is 85 x 56mm
2. NEO4 has 1GB DDR3 RAM with single chanel, But M4 has two version 2GB DDR3 RAM/4G LPDDR3 RAM with Dual Chanel.
3. NEO4  will use AP6212 wireless module with single antenna , but M4 use AP6356S dual-band module, and use 2x2 MIMO and 2 real antennas. 
4. NEO4 has one MIPI-CSI, M4 has two MIPI-CSI
5. NEO4 has USB3.0  x1 & USB 2.0  x1, but M4 has USB 3.0 x4 behind a VL817 internal hub.
6. NEO4 use 1.27mm pitch SMD connector for GPIO-40 pinout,  M4 is same with RPi3 40pin GPIO.
 
Both have:
1. PCIe x2 pin-out
2. eMMC module connector
3. GigE port.
4. TypeC is for power supply and OTG.
5. HDMI-A & MicroSD slot.
6. Big CNC heat sink, with two side 1/4 screw hole

Just a little bit list, more detail would be done on wiki soon.
1. NEO4 board size is 45 x 56mm, but M4 is 85 x 56mm
2. NEO4 has 1GB DDR3 RAM with single chanel, But M4 has two version 2GB DDR3 RAM/4G LPDDR3 RAM with Dual Chanel.
3. NEO4  will use AP6212 wireless module with single antenna , but M4 use AP6356S dual-band module, and use 2x2 MIMO and 2 real antennas. 
4. NEO4 has one MIPI-CSI, M4 has two MIPI-CSI
5. NEO4 has USB3.0  x1 & USB 2.0  x1, but M4 has USB 3.0 x4 behind a VL817 internal hub.
6. NEO4 use 1.27mm pitch SMD connector for GPIO-40 pinout,  M4 is same with RPi3 40pin GPIO.
 
Both have:
1. PCIe x2 pin-out
2. eMMC module connector
3. GigE port.
4. TypeC is for power supply and OTG.
5. HDMI-A & MicroSD slot.
6. Big CNC heat sink, with two side 1/4 screw hole

Just a little bit list, more detail would be done on wiki soon.
1. NEO4 board size is 45 x 56mm, but M4 is 85 x 56mm
2. NEO4 has 1GB DDR3 RAM with single chanel, But M4 has two version 2GB DDR3 RAM/4G LPDDR3 RAM with Dual Chanel.
3. NEO4  will use AP6212 wireless module with single antenna , but M4 use AP6356S dual-band module, and use 2x2 MIMO and 2 real antennas. 
4. NEO4 has one MIPI-CSI, M4 has two MIPI-CSI
5. NEO4 has USB3.0  x1 & USB 2.0  x1, but M4 has USB 3.0 x4 behind a VL817 internal hub.
6. NEO4 use 1.27mm pitch SMD connector for GPIO-40 pinout,  M4 is same with RPi3 40pin GPIO.
 
Both have:
1. PCIe x2 pin-out
2. eMMC module connector
3. GigE port.
4. TypeC is for power supply and OTG.
5. HDMI-A & MicroSD slot.
6. Big CNC heat sink, with two side 1/4 screw hole

Thanks for your suggestion, we’ll check that.

Just a little bit list, more detail would be done on wiki soon.
1. NEO4 board size is 45 x 56mm, but M4 is 85 x 56mm
2. NEO4 has 1GB DDR3 RAM with single chanel, But M4 has two version 2GB DDR3 RAM/4G LPDDR3 RAM with Dual Chanel.
3. NEO4  will use AP6212 wireless module with single antenna , but M4 use AP6356S dual-band module, and use 2x2 MIMO and 2 real antennas. 
4. NEO4 has one MIPI-CSI, M4 has two MIPI-CSI
5. NEO4 has USB3.0  x1 & USB 2.0  x1, but M4 has USB 3.0 x4 behind a VL817 internal hub.
6. NEO4 use 1.27mm pitch SMD connector for GPIO-40 pinout,  M4 is same with RPi3 40pin GPIO.
 
Both have:
1. PCIe x2 pin-out
2. eMMC module connector
3. GigE port.
4. TypeC is for power supply and OTG.
5. HDMI-A & MicroSD slot.
6. Big CNC heat sink, with two side 1/4 screw hole

Just a little bit list, more detail would be done on wiki soon.
1. NEO4 board size is 45 x 56mm, but M4 is 85 x 56mm
2. NEO4 has 1GB DDR3 RAM with single chanel, But M4 has two version 2GB DDR3 RAM/4G LPDDR3 RAM with Dual Chanel.
3. NEO4  will use AP6212 wireless module with single antenna , but M4 use AP6356S dual-band module, and use 2x2 MIMO and 2 real antennas. 
4. NEO4 has one MIPI-CSI, M4 has two MIPI-CSI
5. NEO4 has USB3.0  x1 & USB 2.0  x1, but M4 has USB 3.0 x4 behind a VL817 internal hub.
6. NEO4 use 1.27mm pitch SMD connector for GPIO-40 pinout,  M4 is same with RPi3 40pin GPIO.
 
Both have:
1. PCIe x2 pin-out
2. eMMC module connector
3. GigE port.
4. TypeC is for power supply and OTG.
5. HDMI-A & MicroSD slot.
6. Big CNC heat sink, with two side 1/4 screw hole