Jump to content

mindee

Members
  • Posts

    20
  • Joined

  • Last visited

Reputation Activity

  1. Like
    mindee got a reaction from gounthar in M4 camera   
    FriendlyElec will release a new ROM, it can use dual/single MIPI camera, or USB UVC camera on Ubuntu Desktop, about 1-2 weeek.
  2. Like
    mindee got a reaction from NicoD in M4 camera   
    FriendlyElec will release a new ROM, it can use dual/single MIPI camera, or USB UVC camera on Ubuntu Desktop, about 1-2 weeek.
  3. Like
    mindee got a reaction from dragonlost in NanoPi M4 performance and consumption review   
    Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
     
     
  4. Like
    mindee got a reaction from iav in NanoPi M4 performance and consumption review   
    Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
     
     
  5. Like
    mindee got a reaction from sfx2000 in NanoPi M4 performance and consumption review   
    Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
     
     
  6. Like
    mindee got a reaction from fossxplorer in NanoPi M4 performance and consumption review   
    Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
     
     
  7. Like
    mindee got a reaction from esbeeb in NanoPi M4 performance and consumption review   
    Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
     
     
  8. Like
    mindee got a reaction from Teal in NanoPi M4 performance and consumption review   
    Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
     
     
  9. Like
    mindee got a reaction from NicoD in NanoPi NEO4   
    Not the final version.

     
    Update(8/24/2018): It's time to deal with NEO4, this picture is not the final version. NEO4 will have PCIe x2 and eMMC connector too, and a MIPI-CSI. But the dual-layer USB connector  will share USB 3.0 & USB 2.0, Type-C take another USB 3.0.

  10. Like
    mindee got a reaction from NicoD in NanoPi M4 performance and consumption review   
    Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
     
     
  11. Like
    mindee got a reaction from manuti in NanoPi M4 performance and consumption review   
    Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
     
     
  12. Like
    mindee got a reaction from tkaiser in NanoPi M4 performance and consumption review   
    I think the manufacturing cost is not so high, I am not sure for that now. The NEO4 use a differencet PCIe connector, it’s not a easy thing to fit both with one HAT, considering the signal quality.
  13. Like
    mindee got a reaction from gounthar in NanoPi NEO4   
    Just a little bit list, more detail would be done on wiki soon.
    1. NEO4 board size is 45 x 56mm, but M4 is 85 x 56mm
    2. NEO4 has 1GB DDR3 RAM with single chanel, But M4 has two version 2GB DDR3 RAM/4G LPDDR3 RAM with Dual Chanel.
    3. NEO4  will use AP6212 wireless module with single antenna , but M4 use AP6356S dual-band module, and use 2x2 MIMO and 2 real antennas. 
    4. NEO4 has one MIPI-CSI, M4 has two MIPI-CSI
    5. NEO4 has USB3.0  x1 & USB 2.0  x1, but M4 has USB 3.0 x4 behind a VL817 internal hub.
    6. NEO4 use 1.27mm pitch SMD connector for GPIO-40 pinout,  M4 is same with RPi3 40pin GPIO.
     
    Both have:
    1. PCIe x2 pin-out
    2. eMMC module connector
    3. GigE port.
    4. TypeC is for power supply and OTG.
    5. HDMI-A & MicroSD slot.
    6. Big CNC heat sink, with two side 1/4 screw hole
  14. Like
    mindee got a reaction from tkaiser in NanoPi M4 performance and consumption review   
    Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
     
     
  15. Like
    mindee got a reaction from lanefu in NanoPi M4 performance and consumption review   
    Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
     
     
  16. Like
    mindee got a reaction from Igor_K in NanoPi M4 performance and consumption review   
    Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
     
     
  17. Like
    mindee got a reaction from Werner in NanoPi M4 performance and consumption review   
    Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
     
     
  18. Like
    mindee got a reaction from hjc in NanoPi M4 performance and consumption review   
    Thanks for your suggestion, we made a SATA HAT prototype for NanoPi M4, it can connect  with 4x 3.5inch hard drive and work well.
     
     
  19. Like
    mindee got a reaction from lvmc in NanoPi NEO4   
    Just a little bit list, more detail would be done on wiki soon.
    1. NEO4 board size is 45 x 56mm, but M4 is 85 x 56mm
    2. NEO4 has 1GB DDR3 RAM with single chanel, But M4 has two version 2GB DDR3 RAM/4G LPDDR3 RAM with Dual Chanel.
    3. NEO4  will use AP6212 wireless module with single antenna , but M4 use AP6356S dual-band module, and use 2x2 MIMO and 2 real antennas. 
    4. NEO4 has one MIPI-CSI, M4 has two MIPI-CSI
    5. NEO4 has USB3.0  x1 & USB 2.0  x1, but M4 has USB 3.0 x4 behind a VL817 internal hub.
    6. NEO4 use 1.27mm pitch SMD connector for GPIO-40 pinout,  M4 is same with RPi3 40pin GPIO.
     
    Both have:
    1. PCIe x2 pin-out
    2. eMMC module connector
    3. GigE port.
    4. TypeC is for power supply and OTG.
    5. HDMI-A & MicroSD slot.
    6. Big CNC heat sink, with two side 1/4 screw hole
  20. Like
    mindee got a reaction from MitchD in NanoPi NEO4   
    Just a little bit list, more detail would be done on wiki soon.
    1. NEO4 board size is 45 x 56mm, but M4 is 85 x 56mm
    2. NEO4 has 1GB DDR3 RAM with single chanel, But M4 has two version 2GB DDR3 RAM/4G LPDDR3 RAM with Dual Chanel.
    3. NEO4  will use AP6212 wireless module with single antenna , but M4 use AP6356S dual-band module, and use 2x2 MIMO and 2 real antennas. 
    4. NEO4 has one MIPI-CSI, M4 has two MIPI-CSI
    5. NEO4 has USB3.0  x1 & USB 2.0  x1, but M4 has USB 3.0 x4 behind a VL817 internal hub.
    6. NEO4 use 1.27mm pitch SMD connector for GPIO-40 pinout,  M4 is same with RPi3 40pin GPIO.
     
    Both have:
    1. PCIe x2 pin-out
    2. eMMC module connector
    3. GigE port.
    4. TypeC is for power supply and OTG.
    5. HDMI-A & MicroSD slot.
    6. Big CNC heat sink, with two side 1/4 screw hole
  21. Like
    mindee got a reaction from wtarreau in NanoPi NEO4   
    Just a little bit list, more detail would be done on wiki soon.
    1. NEO4 board size is 45 x 56mm, but M4 is 85 x 56mm
    2. NEO4 has 1GB DDR3 RAM with single chanel, But M4 has two version 2GB DDR3 RAM/4G LPDDR3 RAM with Dual Chanel.
    3. NEO4  will use AP6212 wireless module with single antenna , but M4 use AP6356S dual-band module, and use 2x2 MIMO and 2 real antennas. 
    4. NEO4 has one MIPI-CSI, M4 has two MIPI-CSI
    5. NEO4 has USB3.0  x1 & USB 2.0  x1, but M4 has USB 3.0 x4 behind a VL817 internal hub.
    6. NEO4 use 1.27mm pitch SMD connector for GPIO-40 pinout,  M4 is same with RPi3 40pin GPIO.
     
    Both have:
    1. PCIe x2 pin-out
    2. eMMC module connector
    3. GigE port.
    4. TypeC is for power supply and OTG.
    5. HDMI-A & MicroSD slot.
    6. Big CNC heat sink, with two side 1/4 screw hole
  22. Like
    mindee got a reaction from Tido in NanoPi NEO4   
    Just a little bit list, more detail would be done on wiki soon.
    1. NEO4 board size is 45 x 56mm, but M4 is 85 x 56mm
    2. NEO4 has 1GB DDR3 RAM with single chanel, But M4 has two version 2GB DDR3 RAM/4G LPDDR3 RAM with Dual Chanel.
    3. NEO4  will use AP6212 wireless module with single antenna , but M4 use AP6356S dual-band module, and use 2x2 MIMO and 2 real antennas. 
    4. NEO4 has one MIPI-CSI, M4 has two MIPI-CSI
    5. NEO4 has USB3.0  x1 & USB 2.0  x1, but M4 has USB 3.0 x4 behind a VL817 internal hub.
    6. NEO4 use 1.27mm pitch SMD connector for GPIO-40 pinout,  M4 is same with RPi3 40pin GPIO.
     
    Both have:
    1. PCIe x2 pin-out
    2. eMMC module connector
    3. GigE port.
    4. TypeC is for power supply and OTG.
    5. HDMI-A & MicroSD slot.
    6. Big CNC heat sink, with two side 1/4 screw hole
  23. Like
    mindee got a reaction from TonyMac32 in NanoPI M4   
    Thanks for your suggestion, we’ll check that.
  24. Like
    mindee got a reaction from Igor_K in NanoPi NEO4   
    Just a little bit list, more detail would be done on wiki soon.
    1. NEO4 board size is 45 x 56mm, but M4 is 85 x 56mm
    2. NEO4 has 1GB DDR3 RAM with single chanel, But M4 has two version 2GB DDR3 RAM/4G LPDDR3 RAM with Dual Chanel.
    3. NEO4  will use AP6212 wireless module with single antenna , but M4 use AP6356S dual-band module, and use 2x2 MIMO and 2 real antennas. 
    4. NEO4 has one MIPI-CSI, M4 has two MIPI-CSI
    5. NEO4 has USB3.0  x1 & USB 2.0  x1, but M4 has USB 3.0 x4 behind a VL817 internal hub.
    6. NEO4 use 1.27mm pitch SMD connector for GPIO-40 pinout,  M4 is same with RPi3 40pin GPIO.
     
    Both have:
    1. PCIe x2 pin-out
    2. eMMC module connector
    3. GigE port.
    4. TypeC is for power supply and OTG.
    5. HDMI-A & MicroSD slot.
    6. Big CNC heat sink, with two side 1/4 screw hole
  25. Like
    mindee got a reaction from tkaiser in NanoPi NEO4   
    Just a little bit list, more detail would be done on wiki soon.
    1. NEO4 board size is 45 x 56mm, but M4 is 85 x 56mm
    2. NEO4 has 1GB DDR3 RAM with single chanel, But M4 has two version 2GB DDR3 RAM/4G LPDDR3 RAM with Dual Chanel.
    3. NEO4  will use AP6212 wireless module with single antenna , but M4 use AP6356S dual-band module, and use 2x2 MIMO and 2 real antennas. 
    4. NEO4 has one MIPI-CSI, M4 has two MIPI-CSI
    5. NEO4 has USB3.0  x1 & USB 2.0  x1, but M4 has USB 3.0 x4 behind a VL817 internal hub.
    6. NEO4 use 1.27mm pitch SMD connector for GPIO-40 pinout,  M4 is same with RPi3 40pin GPIO.
     
    Both have:
    1. PCIe x2 pin-out
    2. eMMC module connector
    3. GigE port.
    4. TypeC is for power supply and OTG.
    5. HDMI-A & MicroSD slot.
    6. Big CNC heat sink, with two side 1/4 screw hole
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines