Jump to content

Armbian 23.05 (Suni) Testings

Igor
 Share

Recommended Posts

Igor

Igor

Posted
Posted

I made a first round of testing, some manually:

 

 

and some via auto-testing machinery. Most of images works:

 

Spoiler

testing-man-13th.jpg

 

We need to fix Rpi4, Jetson nano, perhaps other media?

Link to comment
Share on other sites
  • Igor pinned this topic
Igor

Igor

Posted
  • Author
Posted

Rock 3a (Armbian_23.5.0-trunk.219_Rock-3a_jammy_edge_6.3.3_minimal.img.xz) also tested by @monkaBlyat

  • installed gnome DE
  • network working
  • hdmi / audio jack sound output working
  • all 4 usb ports working
  • image boot nice and smooth without issues from sd card
Link to comment
Share on other sites
teknoid

teknoid

Posted
Posted

Nanopi Neo Plus 2 (H5)

linux-u-boot-nanopineoplus2-current_23.05.0-trunk--2022.07-Se092-P6b27-Ha9af-Vaada-B4b55_arm64.deb

linux-image-current-sunxi64_23.05.0-trunk--6.1.26-Sca1c-D4008-P8596-C1438Hfe66-HK01ba-Vc222-Ba98e_arm64.deb

OK, but distorted audio output over USB, I believe this came up since kernel 5.16+ and is still present in 6.x

 

Banana Pi Pro (A20)

linux-u-boot-bananapipro-current_23.05.0-trunk--2022.07-Se092-P6b27-H0429-Vaada-B4b55_armhf.deb

linux-image-current-sunxi_23.05.0-trunk--6.1.26-Sca1c-D4008-P8596-C596bHfe66-HK01ba-V014b-Ba98e_armhf.deb

OK

 

Odroid C2

linux-u-boot-odroidc2-current_23.05.0-trunk--2022.01-Sd637-P6c67-H7ff5-V603e-B4b55_arm64.deb

linux-image-current-meson64_23.05.0-trunk--6.1.27-Sca48-D4008-Pc5ba-C072bHfe66-HK01ba-Ve377-Ba98e_arm64.deb

OK

 

Armbian_23.05.0-trunk_Odroidc2_bullseye_current_6.1.29_minimal.img

full image test: OK

 

new build system is a very good improvement 👍

 

1
Link to comment
Share on other sites
schwar3kat

schwar3kat

Posted
Posted

Orangepi R1 Plus LTS (RK3328) - networking issue AR-1747.

Caused by one of the network interface logical names changing from eth0 to end0.
I can can submit a PR to fix this with a rename in /etc/udev/rules.d/70-rename-lan.rules which is already created from a hook in the board config file (to rename the other network interface).  Already tested and works as expected on current and edge, Ubuntu and Debian.

Before I take this route, I'm just wondering if anyone knows a reason for this happening that could possibly lead to a better fix?  I didn't find anything obvious in the PR's.

Link to comment
Share on other sites
Werner

Werner

Posted
Posted

Armbian_23.5.0-trunk.219_Station-p1_jammy_current_6.1.29_gnome_desktop

 

- boot: first install tells "no internet connection found" but wired was connected and location based detected also worked.

- HDMI video: Gnome desktop works decent on WQHD

- HDMI sound could not be tested, lacking equipment

- USB 2 and 3 work with mouse and keyboard

- Installation to eMMC + boot w/o microSD works

- Sound via 3.5 jack  PARTIALLY works. Only got right channel on my headphones. Headphones work properly on other computer.

 

Link to comment
Share on other sites
Werner

Werner

Posted
Posted
1 hour ago, TonyMac32 said:

that device is on the Media kernel, is it not?  Unless I'm mistaken it isn't going to see any updates or... ?

Yes. Maybe all media should be moved to csc for this reason.

Link to comment
Share on other sites
brentr

brentr

Posted
Posted

RockPI-S patch to assign wlan0 a unique MAC address derived from the rk3308 serial number relied on ifconfig

I need to submit a patch to switch it to use ip link set wlan0 address aa:bb:...

 

Link to comment
Share on other sites
brentr

brentr

Posted
Posted

RockPI-S

Armbian_23.5.0-trunk.219_Rockpi-s_bookworm_current_6.1.29_minimal.img

is unusable.  It drops keystrokes from the serial console if one types quickly and appears to put the terminal emulator into a strange state.

If one is patient enough with the keyboard, one can get through the setup, but the nmtui for connecting to WiFi cannot be used.

Pressing down arrow in nmtui exits it. 

Is anyone else having trouble configuring the minimal bookworm images?

 

The corresponding full image is fine.

Tested:

  Bluetooth

  Ethernet

  WiFi

  audio (at least the audio devices appear and the mixer works)

 

Boot up messages on the serial console appear to be truncated at 70 columns or so.

But, that's probably someone's idea of "progress"

(or, am I the only one noticing this?)

 

As noted earlier, the system failed to assign a repeatable wlan0 MAC address due to its missing ifconfig.

I'll submit a PR to fix this.

 

Link to comment
Share on other sites
balbes150

balbes150

Posted
Posted
2 часа назад, Werner сказал:

Maybe all media should be moved to csc for this reason.

there are no such devices in any form on the official page (there is no point in testing them). the media kernel obtained from armbian-next is useless and dangerous for users, it should not be in network repositories (getting it on existing systems will lead to problems). the same goes for u-boot.

Link to comment
Share on other sites
ahoneybun

ahoneybun

Posted
Posted (edited)

# Pinebook Pro testing

 

## Armbian_23.5.0-trunk.219_Pinebook-pro_jammy_current_6.1.29_gnome_desktop

- Boots live disk [x]
- Installs to eMMC - ext4 [x]
   - Fn keys works [] : NOTE F9 and F10 are swapped
      - Fn1 [x]
      - Fn2 [x]
      - Fn3 []
      - Fn4 [x]
      - Fn5 [x]
      - Fn6 [x]
      - Fn7 [x]
      - Fn8 []
      - Fn9 []
      - Fn10 []
      - Fn11 []
      - Fn12 []
   - Wi-Fi works [x]
   - Bluetooth works []
   - Touchpad works [x]
      - Ports
      - USB-C - data [x]
      - USB-C - power [x]
      - USB-A - data [x]

BUG: Screen locking does not work without GDM.

## Armbian_23.5.0-trunk.219_Pinebook-pro_jammy_current_6.1.29_xfce_desktop

- Boots live disk [x]
- Installs to eMMC - ext4 [x]
   - Fn keys works [] : NOTE F9 and F10 are swapped
      - ESC []
      - Fn1 [x]
      - Fn2 [x]
      - Fn3 [x]
      - Fn4 []
      - Fn5 []
      - Fn6 []
      - Fn7 [x]
      - Fn8 []
      - Fn9 []
      - Fn10 []
      - Fn11 []
      - Fn12 []
   - Wi-Fi works [x]
   - Bluetooth works []
   - Touchpad works [x]
      - Ports
      - USB-C - data [x]
      - USB-C - power [x]
      - USB-A - data [x]

 

BUG1: Ubuntu artwork is being used instead of Armbian during live disk boot once in the desktop. Shows the Ubuntu artwork during boot once installed to eMMC, it does show Armbian artwork at login screen/desktop.

BUG2: Touchpad is very jumpy.

 

## Armbian_23.5.0-trunk.219_Pinebook-pro_jammy_current_6.1.29_i3-wm_desktop

- Boots live disk [x]
- Installs to eMMC - ext4 [x]
   - Fn keys works [] : NOTE F9 and F10 are swapped
      - Fn1 [x]
      - Fn2 [x]
      - Fn3 [x]
      - Fn4 []
      - Fn5 []
      - Fn6 []
      - Fn7 [x]
      - Fn8 []
      - Fn9 []
      - Fn10 []
      - Fn11 []
      - Fn12 []
   - Wi-Fi works [x]
   - Bluetooth works []
   - Touchpad works [x]
   - Ports
      - USB-C - data [x]
      - USB-C - power [x]
      - USB-A - data [x]

 

BUG1: Battery indicator says no battery, I have opened a report of it here: https://armbian.atlassian.net/browse/AR-1756

BUG2: Touchpad is very jumpy.

 

# Not tested yet
## Armbian_23.5.0-trunk.219_Pinebook-pro_jammy_current_6.1.29_minimal

- Boots live disk []
- Installs to eMMC []
   - Fn keys works []
      - Fn1 []
      - Fn2 []
      - Fn3 []
      - Fn4 []
      - Fn5 []
      - Fn6 []
      - Fn7 []
      - Fn8 []
      - Fn9 []
      - Fn10 []
      - Fn11 []
      - Fn12 []
   - Wi-Fi works []
   - Bluetooth works []
   - Touchpad works []
      - Ports
      - USB-C - data []
      - USB-C - power []
      - USB-A - data []

Edited by ahoneybun
1
Link to comment
Share on other sites
Igor

Igor

Posted
  • Author
Posted
9 hours ago, brentr said:

It drops keystrokes from the serial console if one types quickly and appears to put the terminal emulator into a strange state.

If one is patient enough with the keyboard, one can get through the setup, but the nmtui for connecting to WiFi cannot be used.

Pressing down arrow in nmtui exits it. 

 

I have seen this before, but some time ago. Today I have tested numerous of minimal builds on different boards and can't recreate this behaviour. I will try on Rockpi S when I get to it - its not easily accessible.

Link to comment
Share on other sites
clee

clee

Posted
Posted (edited)

Rock Pi 4A and 4C boot to working gigabit ethernet with bookworm-current minimal image, USB ports all work. HDMI output not tested yet.

 

Rock 3A also boots to working gigabit ethernet with jammy-edge minimal image. USB ports all work. HDMI output not tested yet here either.

 

Rock64 also boots to working gigabit ethernet with bookworm-current minimal image. USB ports all work. HDMI output not tested.

Edited by clee
1
Link to comment
Share on other sites
fraz0815

fraz0815

Posted
Posted (edited)

Rock Pi-4B - Armbian_23.05.1_Rockpi-4b_jammy_current_6.1.30_gnome_desktop.img

installed to emmc: logs 

wlan, hdmi, nvme working

 

Rock-5B - Armbian_23.05.1_Rock-5b_jammy_legacy_5.10.160_gnome_desktop.img

Took me a while to boot from SD, was using an older 23.05-trunk version.

Even 'sudo dd if=zero.img of=/dev/mtdblock0' with radxa zero.img would continue to boot happily from nvme instead of sd, changed armbianEnv.txt to sd root, updated bootloaderon mtd -> worked.

besides mtd being a mystical thing for me, almost anything worked:
installed to mtd+nvme: logs
using btrfs on nvme + mtd did not work (don't know if supported, but installer lets you pick it).
performance with panfrost ppa's enabled is absolutely stunning. 

Btw, this time for testing I used my 45W PD PSU (+ PD C<->C Cable 60W) instead of fixed 5V@4A w/o errors and activated the max 12V PD option in armbian-config just for fun.
Sensors report ed 

in0:          12.00 V  (min = +12.00 V, max = +12.00 V)
curr1:         1.50 A  (max =  +1.50 A)

and had no reboots or whatsoever.

Edited by fraz0815
added rock-5b, some PSU infos
1
Link to comment
Share on other sites
Igor

Igor

Posted
  • Author
Posted

@Contributor/Maintainer 


- added missing Rockpi 4C plus
- enabled Mekotronic boards https://www.armbian.com/download/?device_support=Supported&tx_maker=mekotronics

- added Orangepi 5 Plus

 

In case there is another missing or broken images, please report, here or to Jira directly https://armbian.atlassian.net/browse/AR-1765 

2
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines

  I accept